3D tab not showing in navigation bar

I'm using CS5, and no 3D option is showing in the navigation bar. Is there any reason as to why this is happening? Here's an attached screenshot to show you.

Hi,
You need Photoshop CS5 Extended for the 3D features.
This page compares the 2 editions of Photoshop.
http://www.adobe.com/products/photoshop/compare/
If you have Ps Extended, then check that you have the min, RAM requirement.
regards,
steve

Similar Messages

Text will not show in navigation bar or search bar

text will not show in navigation bar or search bar...Cant see text in web address bar or search bar window

This type of behaviour is typically caused by an incompatible or malfunctioning add-on. Try the procedures in the [[troubleshooting extensions and themes]] article.

IWeb tool not showing the Navigation Bar, but published site does!?!?!

I recently installed Leopard, reinstalled iLife08 and copied over my website and was able to reopen in iWeb08. The issue I am having is that I can move/resize the area containing the navigation...I just cannot see the text inside iWeb!!!
If I publish the site, the test is still there, visible and working...
..but inside iWeb I cannot read/alter (or even see) the navigation text. This will become an issue as I add new pages...it kinda defeats the purpose of a WYSIWYG editor
I'm sure this is something silly...Does anyone have any ideas??
Thanks!!

Hi Sujai,
not sure what you mean or are asking - everything was working in Chrome fine, and still does in browser preview in chrome and live in safari and IE.
All assets are in Edge, packaged into a "OAM" which I then have placed in Muse and publish from there (again preview from Muse is working fine in Muse and also Preview in Browser/Chrome - I have tried on different machines as well just in case but it doesnt work on any mac or pc Chrome Broswer)
Hosting is all through Adobe Business Catalyst.
Allen
SujaiS, ironically enough I just tried saving the Edge project as a new project, prublish the OAM files again (havent changed anything in the project), open Muse, re-published the site and now it is working in Chrome again!

Excise Item TAB not showing in MIRO

Hi Expert,
While doing Miro, Excise Item Tab not showing we have check the details Like Tax code, Chapter ID, and excise rate Material.
Kindly help me ,
Thanks
Pranav

Hi,
Please go to transaction code MIGO and check whether excise tax exists or not ? if yes, please click on and click on Miscellaneous tab
In case it is shown as In process we would not able to see excise details in MIRO.
Hope, this solves your issue else revert.
Regards,
Tejas

"retail" tab not showing while creating PO thru' ME21N in IS-Retail

"retail" tab not showing in item level while creating PO thru' ME21N in IS-Retail

Hi,
Go to SPRO > Materials Management > Purchasing > Purchase Order > Define Screen Layout at Document Level - Here for the field selection key "ME21N", under field selection group "Administrative data, item", mark following fields as optional ;
Prior vendor
Season
Reason for ordering
Revision level
And then check.

ITunes Store music tab not showing up

iTunes Store music tab not showing up

FollowUp - Problem Solved.
Just in case anyone else was experiencing the same issues, I pinpointed it down to a corrupted iTunes preference file - com.apple.iTunes.plist.
I created a new user account, lauched iTunes and it worked fine, no black drop down window appearing, so I went back into my account and deleted this and relaunched iTunes and the drop down window showed all the search results again, not the black window as seen in my example image.
Hope this helps others!

My Firefox does not show the scroll bar and the search is not in the centre of the screen

Firefox does not show the scroll bar and search is not in the centre of the screen
Hope you can help
Regards
Waheed

CTRL + B

CIN TAB not showing

Hi all,
In XK01 transaction CIN tab not showing..
I feel its an authorization problem..
Can you solve??
Tonmoy.

doing a trace will tell you more on whether this is authorization-related.
if you are uncertain on how to interpret the trace, you can always copy it into this thread.

The home page does not show the awesome bar or file,edit,view,history,ect.

The home page does not show the awesome bar or the file,edit,history,bookmarks,tools or help options anymore. how can I get these feature to come back up. All it shows now is latest headline & getting started.

* In Firefox 3.6 versions on Windows and Firefox 4 on Windows and Linux it's possible to hide the "Menu Bar" via "View > Toolbars" or via the right-click context menu of a toolbar.
* Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
* Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
See also:
* [[Menu bar is missing]]
* http://kb.mozillazine.org/Toolbar_customization

Opera 10 does not allow my navigation bar to be displayed

This is just a quick revisit if my previous issue, of Opera 10 not displaying the navigation bar in my website. Every other browser displays it correctly. I have just updated from Spry 1.4 to Spry 1.6.1 Framework. I strongly believed that not being up to date was the issue, however evidently it is not.
I hope my various recent posts arent overly demanding. If anyone has any ideas please let me know via this forum or by email. ([email protected])
Kind regards,
Mr.V

Press the escape (esc) key to exit full-screen mode.

In 5.0 URL does not show in location bar when I am using a second Firefox window

I have a lot of problems when using a second window for Firefox 5.0. (I have two monitors and like an open browser on each.) One problem is that when I open a new tab, the URL of a site that I go to does not show in the location bar. It just says "Go to a Web site."
I don't understand why a second copy of the browser acts so differently than the first. Can someone explain this to me? Is there any way to avoid this?
FYI: I had the same problem with 4.0 and reinstalled an older version. But the newest version of WordPress suggested upgrading Firefox, which I did.

Thanks so much for getting back to me. I am familiar with your solution and tried it. It did not solve this problem.

SharePoint 2013 Blog Site not showing current navigation(Left Navigation)

I have created a blog site but blog pages are not showing my current navigation, it has got its own left navigation, Can i show left (current) navigation? I am trying to find the page layout being used for blog items but unable to find.

Hi,
By design, there is a left navigation in the blog site. Like the following image show.
Please check whether there is CSS style in site to hide the left navigation.
If you don’t want to use the default navigation, we can also customize a new one.
We can use SharePoint designer 2013 to modify it(In /_catalogs/masterpage/seattle.master ).
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Mail won't display the viewer window, and it will not close (force quit does not show in menu bar). Can't shut down to reboot because the open mail program prevents it. Any advice?

Mail does not show the viewer window even when new viewer window is cliced. I tried to close mail and reopen, but it will not close, and force quit option does not appear in window bar. I tried to shut down the computer and reboot, but it cannot close because of open mail program it says. Help!

Many thanks. Once I was able to close mail, it reopened and behaved quite normally. Thank you. I'll remember the option quit for force quite!

SOLUTION: tab not showing in ME21N/ME22N with badi ME_GUI_PO_CUST

Hi,
I implemented BADI's ME_GUI_PO_CUST and ME_PROCESS_PO_CUST to show a custom tab in the header section of ME21N, ME22N and ME23N.
But after implementing the BADI's, the tab showed up in ME23N, but not in ME21N and ME22N.
So I started looking for a solution in the SDN forum, and I saw that there were a LOT of people with the same problem, but nobody ever posted a solution.
So here is the solution:
So, I added the fields I wanted to show in the structure CI_EKKODB, implemented the BADI ME_GUI_PO_CUST (the methods SUBSCRIBE and MAP_DYNPRO_FIELDS), and the BADI ME_PROCESS_PO_CUST.
After that the tab showed up in ME23N, not in ME21N or ME22N.
So I found an SAP note saying the following:
Question:
I implemented the 'ME_GUI_PO_CUST' Business Add-In to display customer-
specific tab titles in the EnjoySAP purchase order. They are only shown in display mode (ME23N) however, not in create or change. Why?
Solution:
You may have forgotten to assign a field status to the user-defined fields on these tabs. As a result, the system automatically interprets the field status as 'hidden' in create and change modes. However if a tab contains only hidden fields, then the entire tab is set to hidden. In display mode, fields without a field status are automatically set to display. That is why the tab is displayed in this case.
To assign a field status to the user-defined fields, use the methods provided for this purpose in the Business Add-In 'ME_PROCESS_PO_CUST' (compare sample source code in the FIELDSELECTION_ITEM method).
So in my case, I had to add some code to the FIELDSELECTION_HEADER method of the BADI ME_PROCESS_PO_CUST.
This is the code:
method IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_HEADER.
DATA: l_persistent TYPE mmpur_bool.
FIELD-SYMBOLS: <fs> LIKE LINE OF ch_fieldselection.
* if the item is already on the database, we disallow to change field badi_bsgru
l_persistent = im_header->is_persistent( ).
*   IF l_persistent EQ mmpur_yes.
    READ TABLE ch_fieldselection ASSIGNING <fs> WITH TABLE KEY metafield = mmmfd_cust_01.
    IF sy-subrc IS INITIAL.
      <fs>-fieldstatus = '*'. " Input
    ENDIF.
*   ENDIF.
endmethod.
But then, I realized that this BADI was never triggered. When I entered one of the transaction codes ME21N, ME22N or ME23N, the code in the fieldselection_header method was never executed.
So I went to transaction SE18, and entered ME_PROCESS_PO_CUST in 'Enhancement Spot' and pushed the button display.
And there in the tab 'Enhancement Implementations', I saw an implementation that was not mine, and that did not show up in the overview of the SE18 'BADI NAME' tab for the same BADI... which to me seems strange.
So as you may know, there can never be more than one active implementation of the BADI ME_PROCESS_PO_CUST.
So I disactivated my implementation and put my code in the existing implementation.
And after that it worked!

implement first badi :ZME_GUI_PO_CUST:
METHOD if_ex_me_gui_po_cust~subscribe.
DATA: ls_subscriber LIKE LINE OF re_subscribers.
* we want to add a customer subscreen on the item detail tab
   CHECK im_application = 'PO'.
   CHECK im_element     = 'HEADER'.
* each line in re_subscribers generates a subscreen. We add one subscreen in this example
   CLEAR re_subscribers[].
* the name is a unique identifier for the subscreen and defined in this class definition
   ls_subscriber-name = subscreen1.
* the dynpro number to use
   ls_subscriber-dynpro = '0001'.
* the program where the dynpro can be found
   ls_subscriber-program = 'SAPLMEPOBADIEX'.
* each subscreen needs his own DDIC-Structure
   ls_subscriber-struct_name = 'MEPO_BADI_STRUCT'.
* a label can be defined
   ls_subscriber-label = text-001.
* the position within the tabstrib can be defined
   ls_subscriber-position = 4.
* the height of the screen can be defined here. Currently we suport two screen sizes:
* value <= 7 a sevel line subscreen
* value > 7 a 16 line subscreen
   ls_subscriber-height = 7.
   APPEND ls_subscriber TO re_subscribers.
ENDMETHOD.
implement 2nd badi : ZME_PROCESS_PO_CUST:
method IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_HEADER.
   DATA: l_persistent TYPE mmpur_bool.
   FIELD-SYMBOLS: <fs> LIKE LINE OF ch_fieldselection.
* if the item is already on the database, we disallow to change field badi_bsgru
   l_persistent = im_header->is_persistent( ).
*   IF l_persistent EQ mmpur_yes.
     READ TABLE ch_fieldselection ASSIGNING <fs> WITH TABLE KEY metafield = mmmfd_cust_01.
     IF sy-subrc IS INITIAL.
       <fs>-fieldstatus = '*'. " Input
     ENDIF.
*   ENDIF.
endmethod.

Partition Tab not showing in Disk Utility

Hello again everyone,
I'm attempting to partition my LaCie 2TB (RAID1) Disk in Disk Utility, however the partition tab is not showing up..
There are 4 items visible in the Disk Utility window:
1) the Internal OS Disk
2) the LaCie 2TB (RAID1) Disk
3) & 4) the two slices/partitions of the LaCie mirrored RAID
I select the 2TB LaCie RAID1 Disk, however it only shows the "First Aid" & "RAID" tabs.
The "Partition" (as well as "Erase" & "Restore") tabs are not available or shown.
When I select the Internal OS Disk all the Tabs are shown, and when the 2 slices or partitions of the RAID1 are selected it shows the "First Aid, Erase, Partition, Restore" tabs..
Am I missing a step here?? I know I'm not supposed to select the slices/partitions of the RAID, but instead to select the LaCie 2TB Disk itself, however this is the only option which does not show any "Partition" Tab..
Any assistance is GREATLY APPRECIATED.. Thank you!

Have you tried this:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
I'm sort of confused as to why you would partition a 3 GB drive into just a single 1 TB partition, but that's what I understood you to say. Is this 3 TB drive installed in an enclosure that actually supports a drive of that size? Older enclosures may not and should not be used.

3D tab not showing in navigation bar

Similar Messages

Maybe you are looking for