3d! Turbo problem

I recently bought a 6800GT msi however when I install 3d! turbo- it won't let me change the fan speed, or see the voltages however it will show me the clock speeds and brightness/contrast settings
I have a feeling its my drivers i'm using - 70.41s
do these settings only show up with specific drivers?

[Deleted. You sir are Banned. - Richard]

Similar Messages

Fuzzy Logic 4 Turbo problems

Hi!
I just tried to use Fuzzy Logic's auto clocking. It does this tests and then reboots. Then I read from manual that there should be someking of Turbo-button I can use after rebooting to use best possible clocking. My problem is that I don't have any Turbo-button! Can anyone help, please?

if u want you can redownload it here(big link): link
it is still better to overclock through the bios

KT7 Turbo problem

Hello,
3 months ago, i installes windows xp on my system.
But when i started it up yesterday windows xp brings up the message. Windows save mode. Last know good settings,...
But neither of these things work. Suddenly it works after reconfiguring the settings and a format.
But now, a day later, i just have the same problem.
Windows doesn't want to start. And it also crashes when i want to format my drive.
Is this a typically problem of the msi board?
Tnx!
AMD 1200 Mhz
MSI K7T Turbo v3.0
maxtor 40 Gb
256 SDram @ 133 Mhz

Hi,
Try a harddisk test, as if you harddisk has problems, you will get this over and over again..
Download the test util from http://www.maxtor.com

I can not update the system - libjpeg-turbo problem

The error:
libjpeg-turbo: /usr/bin/tjbench exists in the file system
libjpeg-turbo: /usr/include/turbojpeg.h exists in the file system
libjpeg-turbo: /usr/lib/libturbojpeg.a exists in the file system
libjpeg-turbo: /usr/lib/libturbojpeg.so exists in the file system
Packages (120): alsa-lib-1.0.27.1-1 alsa-utils-1.0.27.1-2 apache-ant-1.9.1-1 asciidoc-8.6.8-2 avahi-0.6.31-9 blender-8:2.67a-2 cddb_get-2.27-7 chromium-bsu-0.9.15.1-1 cmake-2.8.11-1 cpupower-3.9-3 cracklib-2.8.22-3 cronie-1.4.9-4 cups-filters-1.0.34-4
fakeroot-1.19-1 fontconfig-2.10.93-1 gambas3-devel-3.4.1-3 gambas3-gb-compress-3.4.1-3 gambas3-gb-dbus-3.4.1-3 gambas3-gb-desktop-3.4.1-3 gambas3-gb-form-3.4.1-3 gambas3-gb-form-dialog-3.4.1-3 gambas3-gb-form-mdi-3.4.1-3
gambas3-gb-form-stock-3.4.1-3 gambas3-gb-image-3.4.1-3 gambas3-gb-net-3.4.1-3 gambas3-gb-net-curl-3.4.1-3 gambas3-gb-qt4-3.4.1-3 gambas3-gb-qt4-ext-3.4.1-3 gambas3-gb-settings-3.4.1-3 gambas3-gb-signal-3.4.1-3 gambas3-gb-web-3.4.1-3
gambas3-gb-xml-3.4.1-3 gambas3-runtime-3.4.1-3 gawk-4.1.0-1 git-1.8.3-1 gmp-5.1.2-1 gpm-1.20.7-3 graphite-1:1.2.2-1 harfbuzz-0.9.17-2 hdparm-9.43-2 icu-51.2-1 imagemagick-6.8.5.7-1 intel-dri-9.1.3-1 intel-tbb-4.1_20130314-1 inxi-1.9.7-1
jdk7-openjdk-7.u21_2.3.9-4 jfsutils-1.1.15-4 jre7-openjdk-7.u21_2.3.9-4 jre7-openjdk-headless-7.u21_2.3.9-4 kbd-1.15.5-4 kdepim-runtime-4.10.3-2 krb5-1.11.2-4 kvirc-4.2.0-3 lib32-alsa-lib-1.0.27.1-1 lib32-dbus-core-1.6.10-1
lib32-fontconfig-2.10.93-1 lib32-llvm-amdgpu-lib-snapshot-20130403-2 lib32-mesa-9.1.3-2 lib32-mesa-libgl-9.1.3-2 lib32-sqlite-3.7.17-1 libjpeg-turbo-1.3.0-1 libkgapi-2.0.0-1 libldap-2.4.35-4 libproxy-0.4.11-2 libquicktime-1.2.4-6
libreoffice-base-4.0.3-3 libreoffice-calc-4.0.3-3 libreoffice-common-4.0.3-3 libreoffice-draw-4.0.3-3 libreoffice-gnome-4.0.3-3 libreoffice-impress-4.0.3-3 libreoffice-kde4-4.0.3-3 libreoffice-math-4.0.3-3 libreoffice-postgresql-connector-4.0.3-3
libreoffice-sdk-4.0.3-3 libreoffice-sdk-doc-4.0.3-3 libreoffice-writer-4.0.3-3 libsasl-2.1.26-3 libwbclient-4.0.6-1 libwps-0.2.9-1 libxau-1.0.8-1 linux-3.9.3-1 linux-headers-3.9.3-1 llvm-amdgpu-lib-snapshot-20130403-3 man-db-2.6.3-3
mdadm-3.2.6-4 mesa-9.1.3-1 mesa-libgl-9.1.3-1 mlt-0.8.8-4 mpg123-1.15.4-1 mplayer-36285-1 net-snmp-5.7.2-7 openssh-6.2p2-1 pam-1.1.6-4 pciutils-3.2.0-3 perl-5.18.0-1 perl-xml-parser-2.41-4 poppler-0.22.4-1 poppler-glib-0.22.4-1
poppler-qt-0.22.4-1 popt-1.16-6 postgresql-libs-9.2.4-2 procps-ng-3.3.7-2 python-3.3.2-1 python2-distribute-0.6.40-1 samba-4.0.6-1 skype-4.2.0.11-1 smb4k-1.0.7-1 smbclient-4.0.6-1 sqlite-3.7.17-1 subversion-1.7.9-6 systemd-204-2
systemd-sysvcompat-204-2 ucommon-6.0.5-1 udisks-1.0.4-8 udisks2-2.1.0-2 wireless_tools-29-8 xf86-video-intel-2.21.7-1 xfsprogs-3.1.11-1 xorg-xdpyinfo-1.3.1-1
KDE 4.10.3
Kernel 3.9.2-1
Any thoughts?

https://bbs.archlinux.org/viewtopic.php … 6#p1015486
There is a reason why that post is stickied prominently in the newbie section. Please search before posting.
Last edited by WonderWoofy (2013-05-26 20:43:23)

Msi gt660 laptop turbo problem

hi my turbo switch not working and not turn off or on
=

What OS are you running? What version of the drivers? S-Bar?
>>Posting Guide<<
Most likely, you need to run the MSI VGAOC program with administrator rights, depending on what OS you're using.

K7T Turbo-R (6330 v3) & Athlon XP 1800 Problem

My current system is a K7T Turbo-R that I've had for a couple of years now. During this time, I've used an Athlon T-Bird 1.33GHz processor without any issues - very stable (I can probably count on one hand the number of lock-ups). The power supply is a 300W Antec.
I decided to upgrade the CPU. I checked the CPU support status and found that the highest I could use with this board is an Athlon XP 1800+ Palomino, which is what I purchased (code on the core is AX1800DMT3C).
After removing the TBird and installing the XP (along with a new CPU cooler), the system won't post at all, and all 4 LEDs are red. :O
I reinstalled the TBird (along with the same new cooler) and all is fine again. Figuring I had simply received a bum CPU, I tested the same XP 1800 on another system (a Soltek PurpleRay) and found that the CPU was fine.
Note: The BIOS is at v3.6 and J17 is open.
Any ideas would be appreciated.

This reply is for Mustang (a bit late maybe )
The description of your problem indicates one or more failing capacitors on your motherboard. Check out this link for some example pictures of what that looks like:
http://www.careyholzman.com/caps/thumbnails.html
The reason i'm thinking about this is that i replaced 6 dead capacitors on my own K7T turbo last weekend. 4 of the 4700uF/6.3V ones had died (around the CPU socket), and both of the 2700uF/6.3V ones near the AGP slot. My system was showing the EXACT same symptom you are having. It would not boot after powering on with the power button, but a reset helped (this is at 1000 MHz, at 1333 MHz resetting did not help). This also explains why your old processor works fine, but the new one doesnt. Your PSU/power regulator combo is able to provide a stable enough voltage to the old processor with it's low power consumption. But with the new more power-hungy processor those big capacitors (which help stabilizing the voltage supplied to the processor) are missed :/
Apparently a Taiwanese capacitor producer supplied a large number of faulty capacitors to motherboard producers like msi,asus, abit, etc. More info in here: (and lots of other sites too)
http://www.timcousins.com.au/capacitorfailures.htm
Hope this is indeed your problem, and that you can fix it

K7T Turbo LE IDE problem?

Hi,
I'm stuck here. I have an AMD Athlon 1400/266 (T-bird) running on the K7T Turbo Limited Edition mainboard, BIOS version 3.6. 512 MB PC133 SDRAM. 2 Maxtor HD's. My system is about 2 years old.
In the last 2 months, the following has started to happen:
Occasionally (say, 1 out of 10 attempts), my PC won't boot (DISK_BOOT_FAILURE). I know this in advance because when it happens, it gives two short beeps when powered up (can't find the meaning of them :O ).
The problem is: sometimes the Primary Master is gone ("none"), but other times, it's the primary slave. In that case, the PC will boot but behaves very strange once WinXP is started. And sometimes, both master and slave show up as "None" ?(
The optical drives on IDE2 are detected at all times.
D-Bracket is all green. I reseated the IDE cable with no result. Tested both the Maxtor HD's, no errors.
So, what now? Any ideas?
Thanks,
Dennis

Just came back from my holiday so I ran some more tests.
First, I checked the drives one at a time using the PowerMax utility. 81GB slave is fine (tested alone).
40GB master is fine 9 out of 10, 10th time it says "Please Perform extended diagnostics" and then it reports "Congratulations, your drive passed all tests!"
A little weird....
Looks like failing drive, but could this also be IDE controller communication failure?
I also tried replacing the 80pin IDE cable with a 40pin cable which is brand new. This makes no difference other than slower system speed.
Maxtor website has no info, MSI same story.
Now what??? ;(

K7T Turbo LE and problems with IRQ routing Win98SE

When I boot my machine (AMD 1600+ on an MSI K7T Turbo Limited Edition), the BIOS reports me the following:
SiS6326 AGP card: NA (no IRQ even if I enable "Assign IRQ to VGA" in BIOS, but that's not my problem)
Startech NIC in slot 2: IRQ 11
D-Link DFE-538 TX in slot 3: IRQ 10
Echo Mia soundcard in slot 4: IRQ 5
Onboard Promise ATA100 controller: IRQ 11
2x USB controllers Via 3038: IRQ 3 for each one
IDE controllers: IRQ 14 and 15
In "Settings - Control Panel - System - Device Manager", there's one big difference:
The two USB controllers (Via 3038 PCI to USB) are on IRQ 10!!! The only way for Via USB controllers to be on their real good one IRQ (3) is to completely disable "IRQ Steering" in "Settings - Control Panel - System - Device Manager - System Devices - PCI Bus".
To resolve this, I tried:
- different Via 4 in 1 (4.32, 4.35, 4.36): no changes
- Via IRQ miniport uninstalled: no changes
- Enable "PnP OS" and "ACPI" in the BIOS: no changes
- Tried all the combinations in "Settings - Control Panel - System - Device Manager - System Devices - PCI Bus - IRQ Steering" (except disabling IRQ Steering because like I said, it resolves the bug. Though, I want IRQ Steering to be enabled AND the bug resolved).
So, if anyone have a clue, it will be really appreciated.
Thanks in advance.
gugusse
- MSI K7T Turbo Limited Edition
- Athlon XP 1600+ (1.4ghz)
- Win 98SE with all the patches
- NIC Startech (Realtek 8139 chip) in PCI 2 (IRQ 11)
- NIC D-Link DFE-538 Tx in PCI 3 (IRQ 10)
- Echo Mia in PCI 4 (IRQ 5)
- SiS 6326 AGP card (doesn't take an IRQ!)
- HDD Quantum Fireball Lct-10 20 GB 5400 rpm on IDE 1
- HDD Maxtor 6 L080J4 80 GB 7200 rpm on second IDE of the Promise controller (running in standard IDE mode, not RAID)
- Plextor 8/4/32 (master) and CD-ROM 56x Affrey (slave) on IDE 2
- 4 in 1 v.4.35

Quote
SiS6326 AGP card: NA (no IRQ even if I enable "Assign IRQ to VGA" in BIOS, but that's not my problem)
Just thought that I would let you know that I have the same troubles with no IRQ being assigned by the BIOS and due to this I am having troubles getting a DUAL monitor set up running!
--David

K7T Turbo CPU upgrade problem

I've got a ms-6330 K7T Turbo limited edition board. I've been running a 900mhz Duron for years in this board with no problems. I recently bought an XP1800+ (palomino). I upgraded to the newest version BIOS, changed the jumper for the 133 FSB and installed the CPU. The first power-up it hung on the post screen. After that, I got nothing. The D-led shows it is hanging at processor initialization. Put my Duron back in and it works fine.
I bought the processor off Ebay and realize this may be my problem. But it was from a reputable seller. Is there something else I could try before trying to contact the seller for a replacement? I wish I had another socket A board to try it in, but I don't.

Are you 100% sure you recieved a Palomino core?
You can refer to this chart, and compare the CPU to the pictures, to verify that it is a palomino core.
Also, insure the the heatsink is properly seated, as they will fit the wrong way, but will not make good contact with the CPU.
Did you use fresh thermal grease on the heatsink?
PC133 is required to use a 133FSB.
Try clearing the CMOS, and see if that will allow it to boot.

Problem with memory in k7t turbo limited ed.

serious problem!! i've got mainbord k7t turbo limited edition with vhipset via vt82c686b. untill now i had one 128 MB memory installed. I want to extend my memory but when i insert another memory to another slot computer does not start... (led status i all red!) no metter to with slot i insert new memory (its the right pc133 memory type) and no matter if it's 128 or 256 MB. Witho only one slot used it work properly even with 256 MB. Problem occurs only with 2 or more slots sed... this memory works with no problems in other computer (different mainboard)
PLEASE HELP!!!!
thanks in advance

Most times is due to incompatibility between memory modules. Best way to avoid it is to buy 2 modules same brand, or one bigger module.

K7T Turbo Limited Ed. and problems :(

Hallo
I have MSI K7T Turbo Limited Edition mobo (on KT133A). Yesterday something strange happened. I was surfing the net and suddenly my PC rebooted. After reboot I saw that in BIOS test, BIOS didin't detect my hard drives connected to first controller. CD-ROM and CD-RW were properly detected on the second controller.
I turn the PC off....waited about 30 seconds and turn it on. And everything was fine again. But in a short time it happened again. But now I heard something strange. I heard that both drives are stopping...slow down wnd stop. After a 1-2 sec. windows XP freezed and PC rebooted again :( And again there was no drives detected on first controller :(
I checked:
1. viruses - system is clean. I checked it with NAV2003 (within windows and dos - from bootable disc)
2. I tried to plug those 2 drives (15 GB Caviar and 15 GB Fujitsu) to the second controler (first was empty).
I asked some friends about it and one said that it could be power supply (maybe there is some instability or something).
Someone else told me that it could be a battery on the mobo (I have has this mobo for 2 years).
Or maybe it is a problem with motherboard? Maybe controller is damged....but...from the other hand when I restar the PC everythin works fine....some time :(
System: AMD XP1700+ (not overclocked), mobo as I said above, Radeon 8500, CD-ROM and CD-RW (pluged to second controller), Caviar 15 GB and Fujitsu (pluggeg do first controller), Windows XP with SP1.
I had no problems with that system befere.

Hi
I must check the type of that battery...but from the other hand if the battery was the problem it wouldn't keep all BIOS settings. Am I right? But it keeps.
Power supply is 300W - it is a kind off no-name (I bouhgt it with case 3 months ago and there was no problems befere :( )
I've already borrowed one - I'll check it later today (after work).

Problem on fast, Turbo, Ultra Turbo. bios 1.5 still buggy.

Ok, I'm using my 875P neo(1.5 bios) as a realtime video editing system, I have realtime Video out both on Analog and DV (Firewire) with a Canopus card DV Storm 2.
First i thought my canopus card is broken because I have Flickering and nothing than digital blocks out of the DV Output which is really strange but more important i cannot use this. :(
I gladly found out that's not my Storm card but the Ultra turbo setting , i changed to fast, turbo, No Luck and a bit of system instability.
Everything will Only function properly when set to Slow mode X( voilá problem Ficksed! :] but that's a ridiculous performance in slow mode compared to ultra turbo! (benchmark shows write performance less than a 2.4Cghz processor an another brand mobo)(I'm using 3.0Cghz) 8o
I think i'm not the only one with strange problems like this, damn MSI you got some work here.
I hope MSI will Improve a lot with a new bios update if not i will choose an other brand mobo.

Dragak,
There is no guarantee that Ultra-Turbo setting will run 100% stably on ALL SYSTEMs where as each system consists of different sets of hardware. But there are some cases and their system specs are superbly well to support Ultra-Turbo setting. If all system can run at Ultra-Turbo, then there will be no Slow,Fast and Turbo mode anymore!
Based on what factors make you think that your Canopus card can support those faster settings?? Why don't you try to take the card off your system and go with the Ultra-Turbo or Turbo mode.

I met problem when installing Oracle 8.1.6 on Turbo Linux 7.0

I met problem when installing Oracle 8.1.6 on Turbo Linux 7.0.
After setting up environment variables, and successfully
accessed KDE interface, everything was going on well.
The process of installation blocked at 80% in "Database Creation
Process" dialog window.
I have tried two times and got the same result.
The error message is:
Warning: Cannot convert string "-*-Kochi Gothic-medium-r-normal-
*-*100...
Help!

I have done some oracle installations over RedHat 7.0 (not certificated):
Let's check some things:
1- You must have changed very few parameters on your shm.h sem.h files which are in /usr/include/linux directory.
2- You need to upgrade the glibc and libstdc libraries (.rpm)
3- You must have installed the jre116_v5 on /usr/jre and made a symbolic link like this
ln -s /usr/jre/jre116_v5 /usr/local/jre
4- You must include in the CLASSPATH parameter the jre116_v5 directory. It should look something like this
CLASSPATH=/usr/jre/jre116_v5:$ORACLE_HOME/jlib
5- Be sure to create and export all the parameters in your .bash_profile.
6- Run the ./runInstaller.sh in a terminal window inside the Xwindow.
You can find the jre116_v5 in www.backdown.org
I hope these tips help you
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by xx:
Hi every body
when I run ./runInstaller from cdrom
I get this messages :
Initializing Java Virtual Machine from /usr/local/jre/bin/jre.Please wait ...
Error in CreateOUIProcess ():-1
: Bad Address
I use JDK-1-1-6.
Thx<HR></BLOCKQUOTE>
null

Problem for Oracle 8.1.6 installation on Turbo Linux 7.0 platform

I meet problem when installing Oracle 8.1.6 on Turbo Linux 7.0
system.
I successfully set environmental variables and accessed K.D.E
interface.
The installation blocked at 80% at “Database Creation Process”
window.
I have tried two times. Both blocked at 80% and could not
continue.
The error message is:
Warning: Cannot convert string “-*-Kochi Gothic-medium-r-normal-
--100-136-140----” to type FontStruct
Please help me.

Hi,
check out the management server service is started and also configure a Management server in the machine where you have installed the mangement service. and also you have to start some log service i think

Turbo boost problem for DV6-2170ee with Windows 7 Proffessional SP1 32 bit

hello every body,
For:-
HP DV6-2170ee with I7 720 qm processor
System: Windows 7 Professional SP1 32 bit
I have a strange problem, while i am working on battery processor can boost up to 2.6 but when i connect it to the Ac adpater charger, no boost is there?!!!!
Checked through internet and did the following:-
1-update the bios.
2-check power option and use the same settings as in battery mode.
3-observe processor temperature through CPUID HWmonitor, it's almost 65 lower than 67 in the battery case.
4-searched allover the whole internet google .. yahooo ...
5-Each time i try to install the SP50038 which is the driver for the inter turbo boost, it gives an error message "your pc doesn't meet the minimum requirement"
TIll the moment no solution, could you please help me ?
Thank you for your time ans i hope to receive solutions soon ..
Thanks in advance ;-)
This question was solved.
View Solution.

Hi,
To answer your last question first, the Turbo Boost Technology Driver is only intended for processors with an integrated GPU - the i7-720QM does not have this.
More difficult is why you observe no Turbo Boost on AC Power.
Try the following.
Shut down the notebook. Tap away at f10 as soon as you start the notebook to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
When windows has reloaded, download and install the Turbo Boost Technology Monitor from Intel on the following link and see what this shows.
http://www.intel.com/support/processors/sb/CS-031038.htm?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

3d! Turbo problem

Similar Messages

Maybe you are looking for