3D walkthrough - W3D file load problem
Hi,
I found one interesting source file:
here
The file name is:
wallCollision_V-Ray-FPS_mouseMove.dir
I downloaded and started to study this file, everything works
good, except that I am not able to separate the W3D file to act as
external file, because currently it is attached inside this
director file, i tried to delete the current w3d scene and
re-import the same different w3d scene but it doesn't work,
Can anyone help me with this?
This problem can be rectified by using '/' before the filename.
"/filename.m3g".
Regards
Dhaval
Similar Messages
-
Hi Friends,
I am struggling with flat-file loading problem. I am trying to load a .csv file into data target. I took all pre-cautions while loading data. I look into preview and simulate the data. Everything is ok, but when i schedule the data, i found 0 records in the monitor. The following is the STATUS message of the above problem:
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Can anybody help me what is the problem and procdure to resolve it?
Regards,
MaheshHi Eugene,
Thanks for the quick reply. The following screen-shot tells you the messages of detail tab;
OVER ALL STATUS MISSING WITH MESSAGES OR WARNINGS
REQUEST: MISSING MESSAGES
EXTRACTION
EVERYTHING IS OK
DATA REQUEST RECEIVED
NO DATA AVAILABLE DATA ELECTION ENDED.
PROCESSING
NO DATA
The above message was shown in details tab. Pls guide me to locate the problem.
Regards,
Mahesh -
No Data Available (Flat File Loading Problem))
Hi Friends,
I loaded the data from FlatFile(Application Server) I am able to see in the Preview
but the data is not laoding into the Cube. Request status is green but with zero records.
Following is the message
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system
Can anybody help
Regards,
CVHi chakri,
first u have cto check ur flat file in the Presentation server OR Application server
2. Ur flat file fields sequence same In the Trasfer structure .
U should maintain the same sequence in Transferstructure what u have maintained in the flat file.
3. when ur loading date from flatfile source System u have to use FULLUPDATE mode .
check the above .
Thanks,
kiran -
Hi All,
Has anyone come across where flat file uploads cuts out the last 1 or 2 columns from the upload.
This happens in the preview and in the actual load.
The data separators(,) and the Escape sign (") are OK
This are sample lines below:
"60 ","105906 ","A","253215 ","2005052700000000","516007 ",".TonyA ","1.17 ","0.20 ","2005050600000000","7 ","1 "
"102 ","42577 ","A","560194 ","2005070400000000","825293 ","A.HARCOURT ","23.95 ","4.19 ","2005062300000000","8 ","56 "
"149 ","103179 ","A","254010 ","2005020900000000","208864 ","Paul Glew ","2.16 ","0.38 ","2004121300000000","9 ","1 "
It only loads up to the column with 0.20,4.19,0.38 and cuts it out from the date onwards (3 last columns).
Anybody seen this???Hi Guys,
I really don't have much of a leeway in manipulating the file for upload. It is generated by a legacy system and the upload will be automated.
However, I am using a subset of the data for testing which I have been changing to troubleshoot the errors. What confuses me in this situation is that I have similar data structures with the same spaces, date formats etc. that is working. To answer your questions:
In the preview the data is displayed OK and first date in the line is displayed without the suffix zeros up to the last 3 columns which is blank completely, the following column shows 4 zeros and the last column is blank as well.
I have tested the data by physically removing the last 3 columns from the file. When I preview that it also gives me zeros in the 2nd last column even though there is no data to be read.
I have also tested it by removing unwanted spaces and it did not make a difference.
I have also tested via a logical path as well as pc file.
I am thinking other ways to test this......any ideas still......
K -
External SWF file load problem
I'm loading external SWF file which has motion tween.After
the loading progress bar finished to load than calls SWF file.If I
test the movie locally works fine but when simulate the download it
seems it jumps end of the timeline.Is anyone could tell me why is
this??
Thanksk, never mind..... finally figured it all out.
-
---Following is the code to load a huge image file (50-100M)
InputStream in = new FileInputStream(readFile);
ByteArrayOutputStream out = new ByteArrayOutputStream();
byte[] buffer = new byte[4096];
while((i = in.read(buffer)) != -1){
out.write(buffer, 0, i);
in.close();
byte[] result = out.toByteArray();
---It will crash (or hang) on toByteArray() when file size exceed 18mb.
Is there any way to load large files?
Thanks1)I am new to the java forum. May I know what is
documentation for java BUT?http://java.sun.com/docs/index.html
2)Also may I know where I can find topics about
processing the file without loading the whole of it
into memory?
3) Actuall we are loading this file into bytearray in
java at client side(PC or MAC) and use rpc to
transfer to server(UNIX) - the C code in server side
will take this byte buffer and use fwrite to create
this huge file. Is there a better way than this?a) Break the file into smaller chunks and send the chunks together with a chunk identifer to the server. The server will then re-construct the file from the chunks.
b) Install an ftp server on the server machine and user FTP to sent the file. -
Newbie working from a Utility Application template provided by Xcode--
ResultsViewController *viewController = [[ResultsViewController alloc] initWithNibName:@"ResultsView" bundle:nil];
self.resultsViewController = viewController;
[viewController release];
UIView *foo = self.resultsViewController.view; // workaround
self.infoButton = self.resultsViewController.iButton;
iButton is an IBOutlet property in ResultsViewController. The associated button is a subview of the view contained in the nib file owned by ResultsViewController.
If the workaround statement is removed, iButton == 0 when the last statement is reached. Why? Or, what should I be doing in place of the workaround to initialize the IBOutlet property?The point of IBOutlet is to hook them up in Interface Builder. Cntrl-click on the view controller and drag to the button. Select it in the list.
Now when you load the xib it will be filled in.
Note that the view won't be loaded until it is accessed, that's why you're workaround is required or an access to the view if it's not set to autoload. -
Hi,
I tried a few things but no success yet.
I have class Item -> productcode
class StockItem extends Item -> pr, qty
class Book1 extends StockItem -> auth, pub, yr, cat
class Reference1 extends Book1 -> ref
I think I am getting something wrong with the code below.
The complete code is at:
http://www.multiline.com.au/~wje/java/question.html
This is the error message I get:
D:\Assignment2.java:992: cannot resolve symbol
symbol : constructor Reference1 (java.lang.String,java.lang.String,java.lang.String,java.lang.String,java.lang.String,java.lang.String,java.lang.String,java.lang.String)
location: class Reference1
item = new Reference1(code,pr,qty,auth,pub,yr,cat,ref);
^
1 error
public void load(String fileName) {
try {
java.util.List lineBuffers = readBookStoreFile(fileName);
this.fileName = fileName;
Map map = new HashMap();
Item item;
items = new Vector();
for (int i = 0; i < lineBuffers.size(); i++) {
String buffer = (String)lineBuffers.get(i);
StringTokenizer tokens = new StringTokenizer(buffer, ",");
if (tokens.countTokens() != 8)
throw new RuntimeException("Line with incorrect token count");
String code = tokens.nextToken();
String pr = tokens.nextToken();
String qty = tokens.nextToken();
String auth = tokens.nextToken();
String pub = tokens.nextToken();
String yr = tokens.nextToken();
String cat = tokens.nextToken();
String ref = tokens.nextToken();
item = (Reference1)map.get(code);
if (item == null) {
item = new Reference1(code,pr,qty,auth,pub,yr,cat,ref);
items.addElement(item);
map.put(code, item);
catch (Exception e) {
e.printStackTrace();
System.exit(1);
}Thank you in advance for your help
AndonnyThe class Reference1 does not have a Constructor that accepts 8 strings as argument.
-
External w3d file not loading once in the server
Hi,
i have my director file that loads external files in w3d
format, but they are not loading once i upload them in the server,
they load on my local computer, but they stop loading once in
the server,
I have done some research, and I found out that there have to
be some 'correct mime types' you can read this thread here:
http://director-online.com/forums/read.php?3,19629
my question is: How do I change these mime types in the
server? or what should i do to make my w3d files load?Hi,
First check your extension names it most be ".w3d" and not
".W3D" or ".w3D". Second your shockwave 3d files must to be on a
folder called "dswMedia" for security reasons on the server. Any
external file you need for your movie online most to be there.
At last, before you send any command to your loaded .w3d file
inside your movie be shure to check it´s member estate, if you
tray to do something with it and isn´t ready this generate
problems or simply does nothing halting your movie.
Have a nice day. -
CSS Image loading problem by dynamically loading from fxml file?
h1. Introduction
The application I am developing loads an FXML file from a Controller. The FXML uses CSS and images for buttons are set in the CSS.
CSS directory structure
<package>.fxml
Images
<package>.fxml.resources.<subdir>
Example CSS Code
.buttonImage {
-fx-background-image: url("resources/subdir/image.png");
}Example loading fxml from controller code
URL location = getClass().getResource("/package/fxml/UI.fxml");
FXMLLoader fxmlLoader = new FXMLLoader(location);
fxmlLoader.setLocation(location);
fxmlLoader.setBuilderFactory(new JavaFXBuilderFactory());
Parent root = (Parent)fxmlLoader.load(location.openStream());
Controller = (Controller) fxmlLoader.getController();
newPane.getChildren().add(root);h1. Problem
The fxml file does not load and causes the following error:
javafx.fxml.LoadException: Page language not specified.Note, the fxml file loaded correctly before images were added.
Any ideas of what might be going wrong?
h1. Attempted
I have attempted the following: tried changing the url of the image as an absolute path.No Problem: Note, this is the actual FXML, my previous examples were simplifications of package names and class names in order to directly illustrate the problem. Note, I am using SceneBuilder to develop the FXML file.
<?xml version="1.0" encoding="UTF-8"?>
<?import java.lang.*?>
<?import java.net.*?>
<?import java.util.*?>
<?import javafx.collections.*?>
<?import javafx.scene.*?>
<?import javafx.scene.control.*?>
<?import javafx.scene.layout.*?>
<?import javafx.scene.text.*?>
<AnchorPane id="AnchorPane" prefHeight="396.0000999999975" prefWidth="350.0" styleClass="mainFxmlClass" xmlns:fx="http://javafx.com/fxml" fx:controller="com.monkygames.kbmaster.controller.ProfileUIController">
<children>
<Label layoutX="14.0" layoutY="14.0" text="Profiles">
<font>
<Font size="18.0" />
</font>
</Label>
<GridPane layoutX="15.0" layoutY="44.0" prefHeight="99.0" prefWidth="335.0">
<children>
<Label text="Type: " GridPane.columnIndex="0" GridPane.rowIndex="0" />
<ComboBox fx:id="typeCB" prefWidth="249.0" GridPane.columnIndex="1" GridPane.rowIndex="0">
<items>
<FXCollections fx:factory="observableArrayList">
<String fx:value="Item 1" />
<String fx:value="Item 2" />
<String fx:value="Item 3" />
</FXCollections>
</items>
</ComboBox>
<Label text="Program: " GridPane.columnIndex="0" GridPane.rowIndex="1" />
<ComboBox fx:id="programCB" prefWidth="249.0" GridPane.columnIndex="1" GridPane.rowIndex="1">
<items>
<FXCollections fx:factory="observableArrayList">
<String fx:value="Item 1" />
<String fx:value="Item 2" />
<String fx:value="Item 3" />
</FXCollections>
</items>
</ComboBox>
<Label text="Profile: " GridPane.columnIndex="0" GridPane.rowIndex="2" />
<ComboBox prefWidth="249.0" GridPane.columnIndex="1" GridPane.rowIndex="2">
<items>
<FXCollections fx:factory="observableArrayList">
<String fx:value="Item 1" />
<String fx:value="Item 2" />
<String fx:value="Item 3" />
</FXCollections>
</items>
</ComboBox>
</children>
<columnConstraints>
<ColumnConstraints fillWidth="false" halignment="RIGHT" hgrow="NEVER" maxWidth="-Infinity" minWidth="10.0" prefWidth="80.0" />
<ColumnConstraints hgrow="SOMETIMES" minWidth="10.0" prefWidth="100.0" />
</columnConstraints>
<rowConstraints>
<RowConstraints minHeight="10.0" prefHeight="30.0" vgrow="SOMETIMES" />
<RowConstraints minHeight="10.0" prefHeight="30.0" vgrow="SOMETIMES" />
<RowConstraints minHeight="10.0" prefHeight="30.0" vgrow="SOMETIMES" />
</rowConstraints>
</GridPane>
<HBox layoutX="14.0" layoutY="150.0" prefHeight="159.0" prefWidth="335.0">
<children>
<Label text="Description: " />
<TextArea prefHeight="172.0" prefWidth="247.0" wrapText="true" />
</children>
</HBox>
<HBox alignment="CENTER" layoutX="11.0" layoutY="334.0" prefHeight="48.0" prefWidth="329.0">
<children>
<Button fx:id="newProfileB" contentDisplay="GRAPHIC_ONLY" minHeight="48.0" minWidth="48.0" mnemonicParsing="false" onAction="profileEventFired" prefHeight="48.0" prefWidth="48.0" styleClass="newProfile" text="New Profile" />
<Button id="newProfileB" fx:id="cloneProfileB" contentDisplay="GRAPHIC_ONLY" minHeight="48.0" minWidth="48.0" mnemonicParsing="false" onAction="profileEventFired" prefHeight="48.0" prefWidth="48.0" styleClass="cloneProfile" text="Clone Profile" />
<Button id="newProfileB" fx:id="importProfileB" contentDisplay="GRAPHIC_ONLY" minHeight="48.0" minWidth="48.0" mnemonicParsing="false" onAction="profileEventFired" prefHeight="48.0" prefWidth="48.0" styleClass="importProfile" text="Import Profile" />
<Button id="newProfileB" fx:id="exportProfileB" contentDisplay="GRAPHIC_ONLY" minHeight="48.0" minWidth="48.0" mnemonicParsing="false" onAction="profileEventFired" prefHeight="48.0" prefWidth="48.0" styleClass="exportProfile" text="Export Profile" />
<Button id="newProfileB" fx:id="printPDFB" contentDisplay="GRAPHIC_ONLY" minHeight="48.0" minWidth="48.0" mnemonicParsing="false" onAction="profileEventFired" prefHeight="48.0" prefWidth="48.0" styleClass="pdfProfile" text="Print to PDF" />
<Button id="newProfileB" fx:id="deleteProfileB" contentDisplay="GRAPHIC_ONLY" minHeight="48.0" minWidth="48.0" mnemonicParsing="false" onAction="profileEventFired" prefHeight="48.0" prefWidth="48.0" styleClass="deleteProfile" text="Delete Profile" />
</children>
</HBox>
</children>
<stylesheets>
<URL value="@master.css" />
<URL value="@profile.css" />
</stylesheets>
</AnchorPane>Edited by: 960799 on Jan 4, 2013 8:58 PM
Edited by: 960799 on Jan 4, 2013 8:59 PM -
Hi,
i have another problem..,i'm doing assemble that included 1
board and a few component like 7 segment display,wires and IC using
3ds max7 and doing some motion there.
Then i save it as .W3D file...
When I export it at director,i found that it to slow to open
the stage at director.
how can i make it easily to open at stage ?
TQhtml is just text and thus you should be able to just do something like
FileWriter.print(JEditorPane.getText()); -
Constant file permission problems
Hello out there..
I'm currently trying to sort out a problem with - what I guess is my - file permissions.
The problem reappears, even after a long disk repair session, where loads of issues are found and repaired.
At the end it says everything is ok, but if I click repair again, it starts again , and even after restart, the problem is back again?!?!
I've set my permission as follows, (to those of you who doesn't speak Danish - it's "read & write"), but it still says I have "special access"?
Why? and what can I do to fix it..
Please help me..
MichaelMichael Abel wrote:
Hello out there..
I'm currently trying to sort out a problem with - what I guess is my - file permissions.
The problem reappears, even after a long disk repair session, where loads of issues are found and repaired.
Disk Repair or Permission Repair?
Long list from a Permission Repair that come back is normal. Nothing wrong. See http://support.apple.com/kb/ts1448
Long lists of problems from a Disk Repair that keep coming back is bad news. Likely failing disk.
Special Access means you have Access Control List entries set for the particular directory/file.
Did you every change permissions and then "Apply to Enclosed?"
Do you actually have file access problems, or are you just repairing permissions and think the long list indicates a problem? -
Hi All,
I am facing a problem while doing a deta load through Flat File; it's an .csv file.
Problem arises whne I have some records like this £1,910.00 ; it's creating a separate column.
I am having lot's of such amount field.
is there any breakthrough for this issue ?? Your ans would be highly appriciated.
Regards,
Kironmoy BanerjeeHi,
As satish has mentioned it is better to maintain two seperate columns as below
1.0currency
GBP
2.0amount
1910
(GBP )Indicates British Pound.
When ur maintaining amount as 1,910.00 it will go for next column because in info package Extraction tabe Data Separator will be , (Comma).
Regards
Surendra
Edited by: vaade surendra on May 7, 2010 11:37 AM
Edited by: vaade surendra on May 7, 2010 11:37 AM
Edited by: vaade surendra on May 7, 2010 11:38 AM
Edited by: vaade surendra on May 7, 2010 11:41 AM -
Hi all,
I have written C# code to load a sequence file dynamically in TestStand Sequence editor. The code is as follows...
myEngine.PostUIMessage(mySequenceContext.Execution, mySequenceContext.Thread, UIMessageCodes.UIMsg_OpenWindows, 0, null, mySequenceFile, true );
The code is working fine and I could view the Sequence file opened in TestStand Sequence editor.
Now, I wish to select one sequence in the opened sequence file to get the details of the sequence programatically. In other words, I want to simulate a mouse click to a sequence and view the steps associated with that sequence.
Can anybody give some clues...
Thanks in advance.Hi,
Also I am getting error like "Index out of range. Source: TSUISUPP.SelectedSteps at NationalInstruments.TestStand.Interop.UI.Support.SelectedSteps.AddStep(Step val)". Error code: "-17500; Operation Failed." My code is like
mySequenceFile = myEngine.GetSequenceFileEx(@"D:\dynamic loaded sequence.seq", 0, TypeConflictHandlerTypes.ConflictHandler_UseGlobalType);
mySequence = mySequenceFile.GetSequenceByName("First");
Step myStep = mySequence.GetStep(2, StepGroups.StepGroup_Main);
SequenceContext mySequenceContext = mySequenceFile.NewEditContext();
mySequenceContext .AsPropertyObject();
myEngine.PostUIMessage(mySequenceContext .Execution, mySequenceContext .Thread, UIMessageCodes.UIMsg_OpenWindows, 0, null, mySequenceFile, true);
ApplicationMgr applicationMgr = (ApplicationMgr)myEngine.GetInternalOption(InternalOptions.InternalOption_ApplicationManager);
SequenceFileViewMgr sequenceFileViewMgr = (SequenceFileViewMgr)applicationMgr.GetSequenceFileViewMgr(mySequenceFile);
sequenceFileViewMgr.SelectedSequences.Clear();
sequenceFileViewMgr.SelectedSequences.AddSequence(mySequence);
sequenceFileViewMgr.SelectedSteps.AddStep(myStep);
I am sure that my Sequence selected in the Sequence file loaded has more than 2 steps. Please help me in solving this problem and that in the previous post.
Thanks,
Biju kuttan -
I got this error from bpel console .. Can any one please update on this.. Why this this error should occur?.
<messages><input><InvokePlanningOrderRoadshowProducerInputVariable><part name="PlanningOrderRequest" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><PlanningOrderRequest xmlns:ns0="http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder" xmlns="http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder">
<ns0:PlanningOrderHeader>
<ns0:OrderId>10215568</ns0:OrderId>
<ns0:BookingId/>
<ns0:OrderType>Standard</ns0:OrderType>
<ns0:CustomerName>MRS JUNE OCKWELL</ns0:CustomerName>
<ns0:ClientAccountId>EMP</ns0:ClientAccountId>
<ns0:ClientPreAdviceNumber/>
<ns0:Title/>
<ns0:ClientOrderNumber>W3221000-36</ns0:ClientOrderNumber>
<ns0:Latitude>53.526969</ns0:Latitude>
<ns0:Longitude>-2.657221</ns0:Longitude>
<ns0:Street/>
<ns0:HouseNumber>8 Bentinck Street</ns0:HouseNumber>
<ns0:Postcode>WN3 6RB</ns0:Postcode>
<ns0:Town>WIGAN</ns0:Town>
<ns0:Status/>
<ns0:PhoneCallRequired>Y</ns0:PhoneCallRequired>
<ns0:Phone1>01942202596</ns0:Phone1>
<ns0:Phone2>07584651731</ns0:Phone2>
<ns0:SlotPeriodStart/>
<ns0:SlotPeriodEnd/>
<ns0:SlotLength/>
<ns0:StopDuration/>
<ns0:PlanningOrderLines>
<ns0:PlanningOrderLine>
<ns0:OrderLineId>443405</ns0:OrderLineId>
<ns0:OrderId>10215568</ns0:OrderId>
<ns0:ItemNumber>EMP-TC750</ns0:ItemNumber>
<ns0:ItemDescription>RICHMOND KING BED</ns0:ItemDescription>
<ns0:NoOfPieces>03</ns0:NoOfPieces>
<ns0:ServiceString>01000</ns0:ServiceString>
<ns0:ShipsetId>01</ns0:ShipsetId>
<ns0:ClientUPI>009707300553D094</ns0:ClientUPI>
<ns0:OrderLineType>Delivery</ns0:OrderLineType>
<ns0:OrderLineNumber>01</ns0:OrderLineNumber>
<ns0:SpecialInstruction>IF NOT IN GO TO NUMBER 6 FOR KEY</ns0:SpecialInstruction>
<ns0:DeliveryVolume/>
<ns0:DeliveryWeight/>
<ns0:CollectionWeight/>
<ns0:CollectionVolume/>
<ns0:Status>LOADED</ns0:Status>
</ns0:PlanningOrderLine>
</ns0:PlanningOrderLines>
</ns0:PlanningOrderHeader>
</PlanningOrderRequest>
</part></InvokePlanningOrderRoadshowProducerInputVariable></input><fault><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>file:/SOA2M01/app/oracle/product/10.1.3/bpel/domains/operations/tmp/.bpel_PlanningOrder_1.0_06bcbd311b9a0d44d808edcbcee42770.tmp/PlanningOrderRoadShowProducer.wsdl [ Produce_Message_ptt::Produce_Message(PlanningOrderRequest) ] - WSIF JCA Execute of operation 'Produce_Message' failed due to: Could not instantiate InteractionSpec oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec due to: XSD Loading problem.
Unable to load Translation schemas from for http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder due to: XSD Location problem.
No XSD (XML Schema) found for target namespace http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder and input element PlanningOrderRequest
Please make sure the WSDL message points to a valid type.
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
ORABPEL-12537
XSD Loading problem.
Unable to load Translation schemas from for http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder due to: XSD Location problem.
No XSD (XML Schema) found for target namespace http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder and input element PlanningOrderRequest
Please make sure the WSDL message points to a valid type.
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec due to: XSD Loading problem.
Unable to load Translation schemas from for http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder due to: XSD Location problem.
No XSD (XML Schema) found for target namespace http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder and input element PlanningOrderRequest
Please make sure the WSDL message points to a valid type.
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
ORABPEL-12537
XSD Loading problem.
Unable to load Translation schemas from for http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder due to: XSD Location problem.
No XSD (XML Schema) found for target namespace http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder and input element PlanningOrderRequest
Please make sure the WSDL message points to a valid type.
Please make sure all used XML schemas are imported/included correctly.
</summary>
</part><part name="detail"><detail>org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec due to: XSD Loading problem.
Unable to load Translation schemas from for http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder due to: XSD Location problem.
No XSD (XML Schema) found for target namespace http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder and input element PlanningOrderRequest
Please make sure the WSDL message points to a valid type.
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
ORABPEL-12537
XSD Loading problem.
Unable to load Translation schemas from for http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder due to: XSD Location problem.
No XSD (XML Schema) found for target namespace http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder and input element PlanningOrderRequest
Please make sure the WSDL message points to a valid type.
Please make sure all used XML schemas are imported/included correctly.
</detail>
</part></bindingFault></fault></messages>You remove xmlns:ns0 attribute from PlanningOrderRequest and the prefix ns0: from xsd tags. When you declare xmlns:ns0 means it is looking for that ns0 namespace in the project directory or oracle server global directory.
Maybe you are looking for
-
How do I set up a POP email account (not an LDAP account)
When I try to establish a new email account with my COX provider, the mail program defaults to an LDAP account. LDAP doesn't seem to allow me to leave my messages on the COX server after I have read and deleted them on my MACBook. The POP protocol al
-
UCCX 8 Differentiate between new and requeued Emails
Hi All, It would be of great help if anyone could guide me whether there are any features in UCCX 8 that lets Email Agents differentiate a new Email from a requeued one. Is there a way to configure CAD so that Agents can mark emails that are requeued
-
< sigh > i am getting this "error" after re-installing Lion OS on my 2007 Mac Pro. the pdf has been uploaded to my website for /years/ and downloaded and opened no problem. now it wants to go directly to the downloads folder (with the swoosh) and i g
-
ever since i "upgraded" to yosemite i can't run illustrator (i'm getting a plugin error "Photoshopimport.aip" and "PhotoshopExport.aip" message... i've tried to get support (no longer available for cs4 design premium!!!... i've uninstalled and reinst
-
Hi all, I try to monitor some performance details in standard table RSDDSTAT i not found any details showing no data. As well as i tried in FM RSDDCVER_RFC_BW_STATISTICS there also not showing any details. what will be the reason. Display pe