3D WARP/3DBEND: geometry expression no show?

"3D warp" as seen on tv.adobe "What's New", does not seem to be available on my version of CS6 AE (from disk). I'm not getting the geometry option even though,I have the 3D box checked and it is a pixel based layer. I do get the other expression options such as transform and material options. Can anyone help me bend stuff?

In the Advanced section of the Composition Settings, you have to select the Ray-traced 3D renderer (and you have to have one of the supported video cards).
Dan

Similar Messages

  • Trying to reconnect airport express to time machine but express not showing up in base station.  unfortunately clicked forgot in airport utility and express no longer shows up.  how to reconnect?

    trying to reconnect airport express to time machine but express not showing up in base station.  unfortunately clicked forgot in airport utility and express no longer shows up.  how to reconnect?

    I would recommend setting the wireless encryption on the AirPort Express BEFORE configuring it for the AirPort Extreme in this case. This issue also comes up often when configuring AirPorts into a WDS.
    If setting up security in my recommend order does not work, temporarily connect the Express by Ethernet to the Extreme; make the security changes, and then, move the Express back to the desired location.

  • Airport Express not showing up as a selectable network

    I have a new airport express and airport extreme base station (latest firmware installed). I've set up my base station in my home, which is working fine. When I plugged in my airport express, the default name showed up in my available networks on my iPhone. But once I configured it to extend my base station range, it doesn't show up. If I restore the airport express to factory defaults, it shows up again in my iPhone. I can't seem to get the "set up" airport express to show up as available. Any suggestions?

    i assume your airport extreme base station (AEBS) is you main router and you want the airport express (AX) join the network provided by the AEBS.
    you could try this:
    unplug and re-plug the airport express (AX), then click on the airport icon in your menu bar. you should see something like "Apple network bj1234567" or similar (it may take a little while for it to show up). in order to set up the express, you will have to temporarily join its network ! you will get a message asking +do you really want to switch networks ?+ and you do want to do that.
    launch airport utility (AU). you should see the AX on the left. click on the icon of the AX once to highlight it and click continue. follow onscreen instructions and, when prompted, choose to +join an existing network+ and enter the required information for your network.
    any help ?

  • Airport Express stopped showing up on the wireless network

    Airport Express stopped showing up on the wireless network, and now I can't stream music from my iMac or iPhone through the AE as I used to. I now have a new adsl modem, but it doesn't help. The AE has a wireless connection to the modem. I've used Airport Utility to setup the AE again, no help. I also updated to Maverick but it didn't help. Any ideas?

    By "I can't reset it" do you mean you tried both the "hard" and "factory default" resets on your AirPort Express Base Station (AX) and still were not able to see it from iTunes? ...and if so, were you able to connect to it directly, using an Ethernet cable, to configure it using the AirPort Admin Utility?

  • Airport Express not showing name given

    Hello Community,
    I have the latest Airport Extreme and Airport Express. I am also using the latest Airport Utility, 6.0.
    I am using the Airport Express to extend my network. However, under my Wi-Fi icon (upper right icon), I can not see the name given to my Airport Express. Therefore I can not manually select it. I can see it's name in iTunes, if I want to remotely play music and under "Network>Advanced" I can see it has the "same" name as my Extreme, but with an "AE" after the Extreme's name. Im sure that means Airport Express. Also, of course I can see the AE and the name given to it using Airport Utility.
    Question, why is the name given to the Airport Express not showing up under my Wi-Fi ? I could have sworn when I first configured it, it showed up under the Wi-Fi drop down menu under "Other Devices", I believe it read.
    I am running Lion, 10.7.3
    Any help please ? Thank you in advance !

    By the way, I set up the Airport Express wirelessly. Should I have connected it with an Ethernet to my Extreme to set the Express as an Extended network device ? Thanks !

  • Airport express wont show up in utilities wireless or wired

    some times my airport express wont show up in airport utilities on both mine and my wifes macbooks but my i pads and phones keep connection to internet but the books wont. i run ethernet cable to the macbook and sometime it reads the express and some times it wont not quite sure whats wrong.

    Thank you for your post, but I do not understand why you are giving me a link to the generic airport express site. The configuration I have was working fine before I upgraded my router.

  • Express not showing up..What worked for me...

    After my 1st generation Express died last week, I got the new 802.11n-enabled unit. I was able to use Airport Utility to set the device up initially, but after rebooting the unit, it disappeared from my network, a WPA protected WDS-type with one Extreme b/g unit acting as the main unit, never to reappear. Numerous resets appeared to be fruitless, even the hardware reset where you hold the reset button down as you plug in the unit did not work.
    After reading a bunch of posts on here, I finally got my unit to work. Here's what I did.
    First, I did a "hard"-reset on the Express by holding down the reset button till the light started to flash amber, then releasing it. After about 30 seconds of solid amber, the express showed up in Airport utility. I copied its Airport ID number shown. Next I got the same information for the Extreme base station, which by the way, always showed up in AU.
    I opened up the config window for the Extreme base station, by double clicking on its icon in Airport Utility. I then verified that it was set to be part of a WDS, confirmed passwords, etc and then manually added the Express's Airport ID # in the box for remotes. Clicked the update button and let it do its thing...
    Now here's the trick... Power down your airport card, and plug the Express into your computer with an ethernet cable. At this time the Express is probably blinking amber slowly. Wait a few seconds, and then look for the Express in Airport Utility, (you may have to restart Utility, or at least hit the rescan button). My Express was now available for configuration. I followed the procedure as outlined above for the Extreme base station, although this time when prompted I entered in the Airport ID# for the Extreme base station, and set the Express to act as a remote in the WDS window. Enter security options and passwords to match the network you have entered, and hit the update button.
    After a seemingly long restart, the Express showed up in the Utility, with a green light no less! I disconnected the ethernet cable, turned on my wireless card, selected the network and voila! it works. Checking AU showed both units as expected, with each one now fully updatable from their respective configuration windows.
    So in summary, it appears that the newer Express units that are running 7.3.1 firmware, or those that have been updated to this firmware, have a bug that doesn't allow wireless configuration from an initial state. The 1st configuration needs a direct ethernet connection to "take". In addition, it seems Apple's instructions on doing a hardware reset (the one that resets unit to factory defaults by plugging in the unit while holding the reset button) does not work with the n-enabled boxes. This method did work for the b/g units however. There is a "soft"-reset (hold the reset button in for a second or two which pretty much is the same as un-plugging and re-plugging the unit) and the "hard"-reset, which I outlined above.
    I apologize if this is a long winded post, but I hope that I may have been able to help some people out who appear to have been having the same problem that I had.
    Good luck!!

    Yes, the same thing has happened to me. My internet connection was working fine, but I couldn't see my Airport Express in the Admin Utility nor could I see my remote AirTunes speakers in iTunes. After a restart, everything came back to normal. So if anyone else is facing something similar, try that before panicking.
    iMac G5, iBook G3   Mac OS X (10.4.5)  

  • 2nd Airport Express wont show up in  Base Station Chooser, iTunes

    Hi, I have 2 Airport Express units on the same network. One is showing up, the other is not. Both were working perfectly. I recently upgraded my router to a Linksys BEFSR41. When I run the Base Station Chooser, one shows up the other does not. The same happens in iTunes. I can address the Airport Express by chooser Other from Base Station Chooser, then entering its IP address. I updated firmware in both units to 6.3. Both units are configured identically. If I access the hidden airport express from a wireless PC it shows up fine but the other one does not

    Thank you for your post, but I do not understand why you are giving me a link to the generic airport express site. The configuration I have was working fine before I upgraded my router.

  • Airport Express not showing up

    Noticed my aexpress was blinking amber today. We use it to stream music to speakers.
    I tried to reset it and it still is blinking amber. It is not showing up in Airport Utility 5.6 at all.
    It did a few minutes ago but when I went throught the set up process it said something was wrong (don't remember, it was
    all a blur)
    I am basically redoing my whole network. I have so much stuff I am trying to streamline:
    I have a new Airport Extreme that I have ethernet to the cable modem.
    I have iMac etherneted into that.
    I then have a wireless printer (Canon) that is across the room working fine.
    I have a HP Laser Printer I would also like to put across the room- was thinking of getting
    or using this Airport Express for that and possibly getting another for the stereo.
    I wish I could get some good advice on what to do.
    I also have a Weather station that  uses ethernet but it 'buzzes' and I was hoping to somehow put that in another room (i have one of those
    ethernet over electrical plug thingies but does not seem to work for that) AND
    a VOIP phone
    After all that I still have 2 usb hard drives.
    ahhhhhhhhh networking gods help me.

    It may just be possible that the AirPort Express Base Station (AX) is just a bit "out of sorts." I would suggest that you perform a "hard" or "factory default" reset on it to see if this gets it working properly again.

  • Older Airport Express not showing up in Windows AirportUtility

    I haver an older Airport Express, the kind that plugs right into an outlet.  It's plugged into ethernet, I'm trying to use it to set up a second home network and use it for Airplay.  It's too old to use Airport Utility on any of my Apple devices, but I have AU on a windows laptop to set it up.  I bought it off of eBay, so after I first plugged it in I used AU on the Windows machine to reset the ApExp to factory defaults, just to zero out any old user settings. The problme is that since then,  AU cannot find the ApExp!!
    If I look in Wifi settings on my iPhone or iPad it displays the ApExp, and selecting it gives me the error that it cannot be set up with this software (because it's too old), just like before...  but now, when I open AU the ApExp doesn't even show up! Even on the Windows machine, no Airport devices are found. The ApEx is plugged in correctly, and displays a flashing orange light, it has just completely vanished from Airport Utility... what's going on here??

    If you decide to keep the new AirPort Extreme, you will need  a newer "n" version of the AirPort Express if you want to try to extend the network using wireless only.
    A "refurbished" Model A1264 would work, but it will only extend one band from your dual band AirPort Extreme.
    A "new" Express, Model A1394 would be recommended since it will extend both bands.
    You do have the option to use the old AirPort Express, but that would involve using a permanent wired Ethernet connection between the AirPort Extreme and AirPort Express.
    Unfortunately, it is not possible to predict wireless performance in advance when the signal must pass through numerous walls and or a ceiling. For that reason, it would be a good idea to understand the store's return policy in advance if you want to try a new or refurbished Express.

  • Airport Express not showing up in Utility after wireless disabled

    Hi everybody,
    Last night I made the mistake of disabling wireless on my Airport Express. It had worked perfectly before, but now that I want to re-enable wireless, the Express won't show up in Utility! Does anybody have any tips as to how to get it to show up in Utility again? Any feedback would be greatly appreciated!
    Thanks,
    JM
    P.S. I know that this is labeled as an Airport Express for Windows forum, but I didn't see any for Macs. Sorry if I put this in the wrong forum!

    Welcome to the discussions forum jmpstar.
    If you disabled wireless, Airport Utility will have no way to find it, wirelessly. You'll have to reset it by holding in the reset button until the LED flashes rapidly. You'll then be able to configure it again using Airport Utility.
    The Airport Express forum is http://discussions.apple.com/forum.jspa?forumID=1011

  • Which is better as router: snow or express (with show attached by wire)?

    OK It seams like lots of people have similar problems but no one has described this exactly:
    I have a powerbook with an old style airport card (can't remember if that means g or b) and my wireless network running thru my old 'dual Ethernet/snow' airport base station. My wife has her newer ibook with airport extreme card. We have two airport expresses which were meant to extend the range of the network - but don’t seem to do anything other that allow us to use 'airtunes'.
    I often have full bars/signal strength but the Internet connection suddenly drops off and just as suddenly comes back on again. And again. And again. (The 'show time connected' time disappears and then re-appears - but the time connected does not start again at zero)
    This does not happen with my wife’s ibook.
    I have done a hard reset on all airports and reconfigured the netwpork and still this happens.
    Would I get a better overall network (strength and stabitity) if I used the express as the router and attached the snow base station by wire?
    Does anyone know if there are specific compatibility or set-up issues with our specific set of equipment?
    Do I need a new airport card perhaps?
    Please help - its driving me carzy
    Powerbook G4 800 DVI   Mac OS X (10.3.9)   512RAM Airport Card Firmware: 9.52

    Hi Hangingbyathread,
    Welcome to Apple Discussions
    I am going to try to help you with your Airport Problems. Alright, I am guessing you have a snow base station that it is 802.11b. You can not use the Airport Express to extend the network because the original airport doesn't have WDS capabilities. In order to use AirTunes you need to have iTunes 4.6 or higher, and the CD from the Airport EX. Here is some more information Airtunes and Airport Support. You might want to select a preferred network. I have many different WiFi networks in my dorm, and I found that I was constantly losing connection because my computer was picking up the strongest network. I am pretty sure you can't upgrade your Airport card because they are totally different. The original card only can pick up 802.11b at 11Mb where as the Extreme card can pick up to 54Mb at 802.11g.
    I hope that helps,
    Jon 
    PS I am pretty confidant in my information but I could be wrong.
    I am not an Apple employee nor am I associated with the company in any way
    G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz iBook, Macintosh 128K, eMate 300, and many more   Mac OS X (10.4.2)   Airport Express, Palm Zire 72, Minolta Dimage X31, iSight, and many more...

  • Not all Airport Express speakers showing up in Multiple Speakers option?

    I can choose my airport express speakers in the drop down menu in iTunes individually, but when I open the multiple speakers option only 2 out of 5 zones show up?

    I was able to resolve my issue.  I found the answer from another post in an Apple forum.  What you need to do is open the multiple speaker option and expand the window to show the additional Aiports/Apple TVs linked in iTunes.  Once I did this, I am not able to see everything as expected.  Seems like a flaw that it doesn't default to this extended view.  Hope this helps.

  • Mesh Warp effect grid doesn't show in AE CS5 for Mac?

    I'm trying to apply the Mesh Warp effect to a layer in AE CS5 on my Mac. I'm running AE CS5 v10.0.2.4 on Mac OS X 10.6.7. It looks like the version of the Mesh Warp effect is v2.0. When I apply the effect to the layer, I don't get any grid lines in the Composite view to let me distort the layer. I've tried moving the effect above and below the other effect applied to this same layer. That doesn't seem to matter.
    Any idea what's going on?
    Here's a screen shot:

    Thanks. That did the trick.
    The weird thing is, I had tried that before and it didn't work. I walked away, slept, and when I came back and tried your suggestion again it worked.
    LOL, I guess that shows sometimes you just have to walk away for a little bit.
    At any rate, I appreciate your timely suggestion and response.

  • Wired AirPort Express not showing in AirPort Utility or iTunes

    So I was using my two AirPort Express's to wirelessly play iTunes throughout the house. Recently I wired the house with Cat6 and decided to wire in the AXs for more reliability. My AXs are 1st gen and are running 7.6.1. The problem is, when I turned the wireless off on them, they no longer show up in AirPort Utility or iTunes. I can get them to show in utility by selecting "Configure Other" then manually entering their IP address and password, but that's the only way and they never show in iTunes and disappear from Utility once I "Update". They are wired to a Gigabit switch which is wired to a Netgear router.
    Some additional Info:
    Green light is on and solid
    I can ping them and connect manually
    "Connect using ethernet" is set
    Connection sharing "Off (Bridge Mode)" is set
    I also want to extend my wireless range with them, so I've mirrored my wireless settings and used "Create a wireless network" (tried without doing this as well without luck)
    Enable AirPlay is checked
    Netgear WNDR3700v2 Router Firmware version 1.0.0.36
    Keebox SGE08 Gigabit Ethernet Switch
    Windows 7 Home Premium SP1 x64
    Any idea why I can't see or use them in iTunes and AirPort Utility?
    Thanks!
    -Jake

    I wish that I could help you.  I'm having a similar problem, but wireless.
    A couple months ago, my two Airport Expresses and my Apple TV disappeared from iTunes AirPlay. When I ran the Airport Utility, the Airports and Apple TV could not be located.  Interestingly, the Airports displayed a green light and all iDevices (iPod Touches and iPads) could connect to the Airports via AirPlay. Like wise, Airport Utility on the iDevices located the Airports. So I connected an Airport to the router via a Ethernet cable.  Once connected via wire and after a hard reset (with an orange light displayed) the Airport Utility found the wire-connected Airport.  I ran the utility to set up the Airport and a green light came on. Then the wire-connected Airport was visible on iTunes AirPlay. So I unplugged the Airplay and returned it to the stereo.  The green light came on, but now neither iTunes not the computer based Airport Utility could find it, even though the iDevices could. I repeated this process expecting a different outcome enough times to be certified insane.
    So as I sit my computer based (Windows Vista) Airport Utility and computer based iTunes (the new version) cannot locate the Airport Expresses even though the iDevices readily see them. And their green lights display a connection to the network.
    I even tried a forced connection by pasting the Airport's IP address (obtained using Airport Utility on iPad) into the manual configuration of the Airport Utility on the computer.  Oddly, once the IP address was entered, the computer based Airport Utility could see the specs of the Airport Express. But when I tried to save or conclude the Computer based Airport Utility configuration, I got an error.
    Another odd thing is that the Remote App on my iDevices no longer works either. I can no longer connect to my iTunes library.  The remote simply can't find my Library at all. (I confirmed that Home Sharing is on).  But I noted that in iTunes is indicated that four devices work connected or linked to the Library.  So I had iTunes "forget" the devices "connected" for Remote and tried to reconnect. I got the number could on the iDevise but the devise never appeared in iTunes Devises for selection.
    So whatever problem is preventing iTunes from locating my Airport, is also blocking my iDevises from connecting to iTunes.  Meanwhile, my iDevises can sync with iTunes (while wired - I never tried a wireless sync) and can connect via AirPlay to all Airports.
    I've researched this for months and found nothing to work. I'm frustrated to the point of doing something drastic like dumping iTunes and finding some other player to manage my music and stream to my stereos. I'd rather not but the vast majority of my Library can't be played over my stereo.

Maybe you are looking for