3F0 Error Appears when UEFI is Enabled [Please Reply Urgent]

Hi,
I got this 3F0 error even though my HDD is Healthy not faulty.
I brought this PC a month ago
*If i boot in Legacy Mode, i dont get this error and the system boots normally
*If i boot in UEFI mode, i get the 3F0 Error
Please help, i really want UEFI Back
I give kudos if your solution works!
PC = Pavilion 14 E019TX
This question was solved.
View Solution.

Hello eddieleon7pc. I understand you witness a 3F0 error when booting in UEFI mode. I will do my best to resolve the issue!
Now, you believe the hardware is working. However, I do want to double-check to see if the hardware is indeed working properly. The following HP document contains information on how to test the hardware: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03467259
If the hardware is working properly, then I require the following information to continue troubleshooting:
1. The computer model number. If you require assistance locating this information, please reference this website: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00033108
2. Your operating system. If you require assistance locating this information, please reference this website: http://windows.microsoft.com/en-CA/windows/which-operating-system
3. Have you installed any new hardware on this computer, before the issue appeared?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
Please respond as soon as possible. I look forward to your response.
Mario
I worked on behalf of HP.

Similar Messages

Error cannot use device the connected USB device requires too much power this error appeared when I added my camera

Error appeared when I connected my camera to iPad I used a camera connection device error cannot use device t he connected USB device requires too much power
Thanking you
Wendy Banks

Some cameras are designed to use the power suppled via USB when they're plugged into another device, usually a PC or laptop. The iPad does not supply sufficient power for a camera. The iPad Camera kit allows for either a camera to be plugged in only for the transfer of photos, not as a power sourse, or the removal of the SD Card from a camera so it can transfer photos as an alternative.

An unknown error appears when I try to save older files in CC 2014. If I outline the fonts, I can save.

An unknown error appears when I try to save older files in CC 2014. I can save the file if I outline the fonts. Is anyone else having this problem?

It also happens with my illustrator.
Have you found a solution with Adobe Support?
You can transform the all fonts in curves, but itll be impossible edite again. Sad. too sad.

Iphone 5 IOS6.0.1 Error appears when trying to connect to Itunes Store

Iphone 5 IOS6.0.1 Error appears when trying to connect to Itunes Store as Cannot connect to Itunes Store

you are not alone! I get the same for weeks now and I got an itunes voucher for xmas!
enjoy ecuador you lucky liucky barsteward, I have been to honduras/belize/mexico/guatemala/peru/bolivia/chili but ecuador is meant to be BRILLIANT
so to recap obviously some glitch at apple!, sorry I couldn't help

TS4002 "Unknown validation error" appears when I'm trying to sign in to mobile me under preferences. I am not receiving incoming email on my mac pro.

"unknown validation error" appears when I'm trying to sign in to mobile me under preferences. I cannot receive email on my mac pro.

Mobile Me was withdrawn well over a year ago. If you still see Mobile Me in your system preferences it is because you have an old operating system.
iCloud has replaced mobile me, but you would need OS X 10.7.2 or better to use iCloud.

HT4623 when i doing my update my ipad 3 why the itunes show this message ? (the ipad could not be restored this device isn't eligible for the requested guid ) what can i do now please reply urgent thanks

when i doing my update my ipad 3 why the itunes show this message ? (the ipad could not be restored this device isn't eligible for the requested guid ) what can i do now please reply urgent thanks

Make sure you have the latest software on your computer (tap to enlarge image)

Error message when exporting to qt, Please Help!!

I am getting file I/O error message when trying to export a 52 minute wedding project to quicktime. I tried different quictime settings, but nothing helps. Please hep me out with this issue it is driving me crazy.
Thanks

Ok, I have trashed my final cut preferences, I checked and my external hard drive is set to mac osx extended. I ran disk utility, I exported to quicktime movie using current settings with movie self contained checked and I get the error message right away. Then I did it without self contained checked and it goes to 21% and I get the error message. Everytime it says this: File I/O error, that is all it says. What does this mean? What can I do next? I have a deadline for this project. I have alot of memory left on my external hard drive. This has never happened before. Thanks for all your help guys.
D.T.

-77043 Error code when trying to enable contouring.

Hello,
I am currently trying to control a servo motor using a cRIO-9004 RT Controller and cRIO-9104 Chassis with an NI 9505 I/O Module. However, in my user interface loop, I get an error -77043 when I try to enable contouring in this code and this disallows me from causing motion using the contour data I input later on in the code. Does anyone have any idea how I can fix this?
Thanks for any help. Sorry for lack of images, I am unable to upload.

Hey rustawilliams,
If you go to Help»Explain Error
from within LabVIEW and type in that same error code you will see
LabVIEW describe possible reasons for that error code as "NI
SoftMotion: The requested interval between contour points in the
buffer is invalid." My first thought for the cause of this error to be
the order in which you set up your contour move. What happens if you
switch the order in which you enable your contouring and when you load
your points; i.e. if you load your contouring points and then enable
the contouring?
Hope this helps.
-Ben
WaterlooLabs

Error appears when debugging a generic collector for ADONIS

We have Sentinel 6.1
We are working with a new collector for the DNS appliance ADONIS , and
when we are debbuging an error appears in the function SUBSTR
When this error doent appear during debugging too, looks like the
collector enters in a loop, the funtion where the debugging stands is
"this.read = function"
The generic collector doesnt been modified in the functions preParse,
Parse and Normalized.
The generic collector its in JAva script and It was maded with the ANT
templates in ECLIPSE.
marrovdr
marrovdr's Profile: http://forums.novell.com/member.php?userid=41874
View this thread: http://forums.novell.com/showthread.php?t=423439

Hmm....
Well I'm not sure we have quite enough information yet to really help
you. That said, there are some basic things we can check:
1) Are you saying that you are seeing this error with a completely
unmodified Collector, e.g. you ran the "Create New Collector Plug-in"
Ant task, then immediately built and deployed the result?
2) Are you using the 'stable' SDK or the SVN-based 'current' branch?
Also, I'm not clear what you're saying about the this.read bit, but the
line that states:
record.connectorData = getData(5);
(which is in the Connector.read() method) is where the Collector
fetches the next record from the Connector. You should note that if no
data is retrieved, you'll basically get an empty record. If you try to
do any parsing on that data, you can run into problems because the
variable you are trying to operate on don't exist.
By this I mean that if rec.s_RXBufferString doesn't exist (e.g. you got
a null record from the Connector), but you try to do:
this.s_RXBufferString.substr(5,8);
you'll get an error like "method substr() is undefined" or something.
Also I should note that if your Collector is pausing at the getData()
line, that probably means that your device isn't actually sending any
records - check using a Raw Data Tap on the Event Source.
DCorlette
DCorlette's Profile: http://forums.novell.com/member.php?userid=4437
View this thread: http://forums.novell.com/showthread.php?t=423439

Not enough memory error appears when i open ai files

My computer is powerful enough with 8GB ram,
After i edited about 20 ai files (open, edit and close), i got this error box (when i tried to open a new existing artwork)
So, what's the problem?
i have about 1TB free space in both C and D drive,
and memory is still free,
What's the solution?
How to increase the cache size?

Steel Shield
Connect session is a session where you will connect with me using Adobe Connect in a browser window (Chrome) and then you will be able to show/display your desktop to me. It will be like a live display of your screen to me.
Hope you got it.
Waiting for your reply.
Thanks & Regards,
Raghuveer

"There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again. (103:103)" error appear when I try to download pdf file when using Adobe Reader X. Any solution?

Any pdf file I tried to download the error message appear since I installed Adobe Reader X.

I have the same problem also but solved with the solution from http://www.brain-cluster.com/blog/orange/2011/03/06/there-problem-adobe-acrobatreader-if-it-running-please-exit-and-try-again

Satellite C50-B with Win 8.1 - PXE error appeares using UEFI boot mode

I have a C50-b laptop running Win 8.1 and recently needed to boot it from a usb key so eventually found the way to do that (miss the bios first boot menu) and managed to do that.
My problem is even when I have returned to uefi and set the boot order to be local disk, cd, network it asks everytime do I want to boot for PXE IP4,IP6 then IP4 and IP6 again. I have also disabled secure boot
I think some value is missing when I switched to BIOS and back to UETI boot option but where is the laptop getting the setting to tell it to PXE/Network boot when its down the list and wake on LAN is disabled.

According to the automated support on the site I should do the following for Win 8
Switch on the notebook and immediately begin tapping the F2 key continuously.
When the system setup (BIOS) appears, stop tapping F2. Tap F9 once, select 'Yes', and press Enter.
Use the cursor keys to move to the Advanced menu.
Choose System Configuration and press Enter.
Ensure that Boot Mode is set to UEFI Boot.
Press Escape to return to the Advanced menu and choose the Security menu.
Set Secure Boot to Enabled.
Press F10 once, select 'Yes', and press Enter.

Why does the message '500 internal server error' appear when I use any search engine?

I am able to type a web address and use the internet successfully but when using ANY search engine I get the '500 internal server error' message. This appears if I type in a word to search '''bold text'''and the result is the error message. I have recently uninstalled rapport and hitman pro. Please help.

Did you check your security software (firewall)?
Which security software (firewall) do you have?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
See:
* [[Server not found]]
* [[Firewalls]]

Error message when trying to sync: "Please try again."

I had to format my HDD and reinstall everything. Previously I had set up Firefox Sync so I could retrieve all my bookmarks and whatnot.
When I put in the 3 part code to retrieve said data, it gives me an error saying "Please try again." No error code or explanation, just that. Originally, the servers were having issues so I decided that was the issue. But now that the servers are in normal condition, it still gives me the same error.

If you do not have a backup of the sync key then the data that is stored on the Sync server can no longer be accessed and is lost.
*https://support.mozilla.org/kb/ive-lost-my-firefox-sync-account-information
*https://support.mozilla.org/kb/firefox-sync-troubleshooting-and-tips

Error appears when Upgrading from 11.1.1.3 to 11.1.1.4

Hi All,
We've Installed Hyperion 11.1.1.3 and would like to go for 11.1.1.4. We've applied the maintenance release 11.1.1.4. After the installation when trying to open EPM System Configurator, it is giving the below error message
Java.exe-Entry point not found, The procedure entry point NETInetAddressToSockaddr@24 could not be located in the Dynamic Link Library net.dll
Pls. advice
Thanks,
PVR

Hello,
Test to set the PATH before launching rwserver :
example:
set ORACLE_HOME=e:\oracle\ods1012
set PATH=%ORACLE_HOME%\bin;%ORACLE_HOME%\jdk\jre\bin;%ORACLE_HOME%\jdk\jre\bin\classic;%ORACLE_HOME%\jdk\jre\bin\classic;%ORACLE_HOME%\jlib;%ORACLE_HOME%\jdk\bin
rwserver server=repsrvr batch=yes autostart=yes
Please let me know if it works.
Thanks,
KKT

3F0 Error Appears when UEFI is Enabled [Please Reply Urgent]

Similar Messages

Maybe you are looking for