3G dropping calls when i slide to answer?

my dad's 3G has been dropping his received calls when he slides to answer them. this happens about 60% of the time. any ideas on what the problem could be? any help would be appreciated. we both got our 3G's at the same time and with the same carrier. i haven't experienced anything wrong with mine.

so far all i've done is reset all settings. it's hard to test whether the problem has been rectified because it occurs 50-60% of the time. but i tested it by calling with the house phone and also from my phone and it worked fine. so i'm just trying to get some info/tips incase it's still a problem tomorrow. also the phone is less than a month old :s

Similar Messages

  • Network Extender Dropping Calls when handing off to Outdoor Network

    If I stand right next to my network extender, it works great.  the moment I move outside a 15 ft ring, I begin to drop calls.  i believe it is because my Blackberry is now getting a stronger signal from the outdoor network and I should be handing off to outdoor network.  Instead of the call continuing, it drops.    Also, the same thing happens when I am on a call inside my house, get into my car and drive away; I drop the call.  I have called VZW Tech support and was told to power down the unit, yadda, yadda, yadda and call back if I still have the problem. Well, I still have the problem, so I am posting this in the hope someone has seen this and it saves me the hour long support call that doesn't resolve my issue...

    I have the exact same problem with a Verizon/Samsung network extender that started dropping calls after about 30 seconds into a conversation. This problem started at almost the exact same time as those reported on this forum. Verizon has not once mentioned that it may be a problem on their end and we quit using the extender almost a year ago. However, with new smart phones in the household and multiple reception problems, we need to find a solution. I think Verizon owes its customers/supporters a solution since it sold the extender devices to the consumers at substantial expense. I for one, would like to either get my money back along with the time spent trying to rectify the problem, or get a solution that will allow us to carry on conversations in our home. It is ridiculous with the amount of money spent on monthly Verizon Phone bills, that we get such poor service - simply ridiculous!

  • My mac book pro keeps dropping calls when skyping.  I skype regularly with one person and they told me that more calls get dropped with me than with anyone else.

    When skyping, my mac book pro keeps dropping calls.  Apparently, it's the worst with my computer according to those I skype with.  Please help!

    What did Skype support say when you asked them about this?

  • Very poor coverage - just got an iphone 5s - typically 1-2 bars.  Dropped calls when I switch rooms.  Right in the middle of Palo Alto/Stanford area - zip code 94305

    Crazy - never had any issues with AT&T - thinking about going back.....  Brand new iphone 5S. I've reset the network, disabled and enabled imessaging. Any thoughts?

        Kent,
    We do not want to see you go. Thank you for all the troubleshooting you have done thus far. I do not see any service alerts in your area. Do you only have issues inside your home with dropped calls? Do you also have issues with data and text? Are you connected to Wifi in your home?
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • Latest Pre Update -- Dropping calls when face touches screen

    I am having tremendous issues of being on a call and the PRE is hanging up on calls.  This only surfaced during the last release.  Has anyone had this issue.  This is a deal breaker.  Why have a phone that hangs up????
    Post relates to: Pre p100eww (Sprint)

    It sounds like an issue with the proximity sensor not turning the screen off as it approaches your face. There is a test for this in the Device Info, Preferences, Interactive tests, Screen. See if that test runs fine for you. Do it a few times and see if sometimes it does not work.
    I have noticed a couple times after 1.3.1 after a call when I went to hang up the screen was not on the dialer but the contact info page for the person I was talking too. Which comes up if you tap there name while on a call. This never happened before 1.3.1 . But it has not happened for awhile now either.

  • FaceTime doenst work - keeps dropping calls as soon as I answer

    Facetime calls come through on my iphone and MacBook Air. But if I try to answer on my MacBook Air, it attempts connection and then immediately drops call, so I have to make and receive all facetime calls on my iphone.
    skype works on my MacBook Air.
    any suggestions?

    Unable to make or receive FaceTime calls after April 16, 2014

  • N80 WiFi-WPA and drop calls when close the keypad

    My phone detail: Nokia N80(42.02)
    V.3.0614.0.3
    11-04-2006
    RM-92
    Although it seems my phone works quite prefectly, some problems has arised especially closing the keypad when u on the phone would result dropping the call.
    I am not sure whentever this is in propose or is just a bug.
    Anyway, It is quite annoying to me.
    Second issues is to access a secure WiFi is quite troublesome. Connecting to the AP is always freeze the whole handset. And up to now, i haven't succedded even a single time to connect to that secure WiFi Network.
    The secure wifi network is cisco based using WPA
    (WEP-PEAP[EAP-MSCHAPv2])
    The Setting is rite for sure(ENABLE protcol only used). And it happens to be the action would freeze the handset.
    I have asked the I.T. team for help...however the I.T. team didn't know what to do.
    Can anybody tell me where the problem was?
    or am i need to wait a new firmware to come....>_

    Hello!
    I suggest to try use your access points with infrastructer mode and without hidden SSID first.
    It has to help you.
    Andrey
    6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
    N95, E61i, E71, E72,8600, 5800, N8

  • My 4s is dropping calls when switching towers- my 3GS did not have the same problem in the same areas?

    This 4S is a major step backward for my compared to my 3GS-  Less battery life, much poorer ability to switch signal types without losing the call.  What are they thinking adding all these bells and whistles without making a damned battery that can get through a full day and an antenna that can handle a variable network?  This stuff was solved YEARS ago by Blackberry. 
    I've done the location off fix for the battery- no help whatsoever.  Any ideas on the tower change call drop problem?!  Very frustrated that I spent $400 on this POS

    ...and the fact that I'm locked into this thing for 2 years is absurd when it's so flawed.  What a scam.

  • IPhone dropping calls when around Verizon FIOS router

    Hello,
    I have first generation of iPhone running 2.2.1. At home I have Verizon FIOS. I have noticed that at home if I dont switch off wifi on my iPhone, I get dropped phone calls. If I am connected to wifi and I make a phone call, within a minute or two I can not hear a thing. If I switch off wifi on my iPhone and make calls then everything goes fine. This is also true when I am receiving calls. I dont have this problem when I am around routers other than the FIOS router I have at home. Has anyone experienced this and know how to fix it?

    i have FIOS but i haven't experienced that problem because i have the wifi in the FIOS router turned off and have an Airport Extreme bridged to the FIOS router supplying the wifi.
    if you don't have any wifi devices then maybe you can just turn off the wifi in the FIOS router.

  • IP Communicator drops call when VMI light comes on

      Having issue with a user where an active call gets dropped when the user is left a voicemail.  When the VMI light comes on the active call gets dropped.  Additionally the user can't make a call until the voicemail is checked and the VMI light goes off.  I know we experienced this issue in the past but I can't find my notes on the resolution.  Has any one seen this before and knows how to fix it?

    What version of callmanager are you running?
    What version of unity or unity connection ..?
    Do a route plan report on your voicemail ports and mwi
    See if the dn's overlappp
    Sent from Cisco Technical Support iPad App

  • Dropping Calls when using Bluetooth

    My Droid Bionic pairs fine with my Bluetooth, (Jabra Cruiser 2)  it even streams the music through my radio just fine.   I also use the car dock for my Bionic.  However when I'm on a phone call after about 2 mins, the call just drops out.  Happens every single time I'm on a phone call.  Very annoying!   Is this a problem with the Bluetooth software or is there a setting I can change?  HELP!

        Hi Sandy0380,
    I use a Bluetooth device all day and I can understand how frustrating this issue can be. It sound more like a compatibility issue. Did you check with Bluetooth manufacturer to ensure full compatibility with your phone? While Bluetooth is a very comprehensive technology that allows wireless connection between 2 devices, some Bluetooth profiles may not be fully compatible.
    AntonioC_VZWSupport
    Follow us on Twitter at www.twitter.com/VZWSupport

  • Why is the "answer" button on iphone on the right side when you "slide to answer" from left to right to answer?

    I have rejected a few calls because of my habit to start on the left side not realizing an app or my home screen was open.  This seems like a simple oversight I was hoping to see fixed in 7.0.

    Submit your feedback directly to Apple using the appropriate link on the Feedback page:
    http://www.apple.com/feedback

  • Dropped calls on micro cell cell from weak tower signal

    They all drop calls when the phone gets even the least amount of signal from a tower. This happens in South Carolina,Florida,New Jersey. So the problem is nation wide. This problem was identified back in 2010. Has there been a fix yet?

    The "problem" is not nationwide otherwise myself and a lot others would be experiencing the same thing.
    There are lots of reason why call may be dropped and the causes are varied. The MicroCell does not need a local tower (macrocell) to connect to when in range of the MicroCell. The macrocell is only required at the time of Initial Activation and then for periodic location verification during night time network maintenance ( which is only done ocassionally).
    Certain phones (specifically the Samsung Galaxy line of phones) have difficulty with the MicroCell due to OS protocols which Samsung is aware of but very slow to respond.
    If you are experiencing dropped calls you will need to give us specific details of your setup, ISP, phone, etc to see if we can help. Your issue may or may not be related to what you are calling a nationwide problem.

  • Wow it appears to be hang-ups not drop calls....

    Try this: (It actually helped with my so called drop calls)
    When receiving calls and/or making calls, press the HOME button once the call is made or received to minimize the CALL PAD. You should see your call at the top of your phone in green. If you want to bring the CALL PAD back up, just touch the green area and the CALL PAD will come back up..
    Minimizing the CALL PAD keeps your face from touching unwanted features and hanging up on people.
    Worked for me! Hope this helps.
    poochieturner

    Click the Time Machine icon in the menu bar. The time of the last backup is shown in the drop down.

  • I have had my iphone 4s for three months and am experiencing dropped calls in the middle of calls lasting from 3-10 minutes. I have ATT service.  Any suggestions?

    I am experincing dropped calls when using my iphone4s for calls lasting from 3-10 minutes.  Any suggestions for resoving this vexing problem?

    A few things to try, in order...
    Pop your SIM out, clean it and reinsert.
    Reset your network settings.
    Contact AT&T and make sure your account is provisioned properly.
    Get a new SIM.
    Restore from your backup.
    Restore as new, i.e. without your backup.
    If still a problem, it's likely a hardware issue.  Take it to Apple for a warranty replacement.

Maybe you are looking for

  • Oracle 9i and 10g

    Hi, does anybody know the ETA for Oracle 10g R2? I have to set up a new Oracle database on Red Hat Enterprise Linux 3 ES. I would like to use Oracle 10g, but I am not sure if the current release (R1) is good enough for production use: maybe Oracle 9i

  • Number field does not display trailing zero after decimal

    Hi, I have a Text Item of type number with size set to 6. if the database value = 19.10, the number field displays 19.1 I want to display the complete 19.10 in the field. How do I do it?

  • Installing Oracle 11gR2 RAC Problem: ASM disks

    Folks, Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html At the

  • How to restart paused Task in Batch Monitor

    Hi All, So I've submitted a bunch of stuff from Compressor. Batch monitor is chugging away but there's no way it's gonna finish before I need to leave and take my laptop. So I figured I could just pause the task. Shut down. Remove the drive. Go home.

  • Suggestion weather to go for BI7 or not

    hai we are planning to use BI7.0.But it is said tat BI7.0 supports excell 2003 but not excell2000. The problem is that all our core data is in excell 2000 so can anyone give a suggesion wat to do . Can we go for BI7.0?