3g fails after applying carrier settings to a phone that worked since day 1

Please can anyone advise me what to do. I am travelling and have been using my iphone extensively on the Spanish 3G network. My iphone is from Belgium and is unlocked (fully legal as Belgium iphones are not locked to any vendor) and when i am in Spain i insert my Spanish SIM and change my internet APN settings and bingo everything works just great. However this morning i accepted an update from apple itunes for carrier settings for the vodafone network in Spain, At that point i was using my iphone in tethered mode for the internet (the hotel room fee's being a rip off).
Now my iphone claims "Could Not Activate Cellular Data Network" and i can not access any settings any more to change the APN!
Jeez i wish i hadn't accepted the update. of course there is NO backup in the backup directory, it seams apple doesn't think we need a backup. How can i get my phone to the normal state where i can access the settings for network like APN, MMS etc?
Thanks to all

A loss of the APN setting should mean the carrier update has installed the correct APN, so the setting is not needed. To undo the carrier setting, you could try deleting any files in:
~Library/iTunes/iPhone Carrier Support
then Restoring the iPhone.

Similar Messages

After updating carrier settings i cannot sync music

i was told to update my carrier settings today and after doing so i now am told to erase all my songs in my iphone because it's sync with another computer. i only have been using this computer. it's rediculous to erase 50G of songs and reinstall them.
what do i do?

I have the same problem: sounds muted for all apps, alerts (except the phone ring). It seems to be an intermittent software (iOS 6) problem (other threads suggest the software fault might be related to managing the docking connection state). Mine also has some weird link to the docking connection.
After multiple reboots, "Reset All Settings" and ear-buds in/out didn't work, I was going to resort to a complete wipe. My work iPhone 4S isn't associated with my home PC / iTunes, so I went to do a manual back-up of photos to my PC - but no photos were visible on the PC (using Windows Explorer). The windows transfer app also alerted me that there were no photos (even thoough there were 200+ on the phone). I took a new photo and tried again and there were all the old photos. Also, sounds were back, plus the hardware volume control buttons were working again.
However - disconnecting and rebooting and the controls/sounds go away again after entering my passcode .
Plugging back into an non-iTunes PC seems to bring them back... Very frustrating.

Instance failed after applying patch

i am learning on ides. i applied patch #10 to my system, some how it failed to apply, now my instance is not starting up , is there any way to undo the patch. thanks for the reply

Hi,
Usually instance startup is nothing to take with the Patches applied specially in ABAP kind of system. If your Patch implementation is in middle, So you must be getting lots lots of dump...But system should come up in most of cases.
Ok...Now...have you changed something related to Parameters (Memory, DB related or any other parameters)...because parameters change is something very crucial when your system is not coming up?
Please post some more inforrmation so that we can help you out.....Please try to debug step wise...
1) is DB is coming up?
2) if yes, please post some relevent info from dev_disp, dev_w0 or dev_ms file or from some other files which are getting updated when you are trying to restart your system.
With Regards,
Saurabh
Edited by: Saurabh.Arora on May 17, 2009 9:34 PM

T410: Getting 'Windows Delayed Write Failed' after applying updates

I have a T410. A 2522-AN4. Running Windows XP/Pro.
I have the System Update process running. Every week I get notification of any updates, etc. that I may need to attend to.
On 10/29 the pop-up came up. There were a number of updates in the 'Optional' category.
I installed them all.
As soon as I rebooted the machine, I started received these 'Windows - Delayed Write Failed' popups. Basically the popup window names a file and indicates that 'Windows was unable to save the data for the file C:......'. Almost every boot up would give me one of those for a file with a name that ended in .....crmlog. Sometimes that would be the only message I got. Other times I might get one or two more popups during my use of the machine. Sometimes when printing which would have a file that ended in ....SPL. I never received these errors before applying these updates. I ran a CHKDSK on my drive. It was clean. I ran the HDD diagnostics from the boot menu. Ran perfectly. I did a defrag of my C: drive. No problems. I tried disabling Write Caching on the C: drive. Didn't help. I'm pretty much left to believe that one of these updates I applied has exposed me to this issue. Now the question is which one? And what do I do about it?
Here is what was installed on 10/29:
ThinkPad BIOS Update Utility US 1.32-1.12
Intel HD Graphics Driver for Windows XP(GM55) 6.14.10.5292
Intel Pro/1000 LAN Adapter Software for Windows XP 11.5.10.1030
Intel AMT 6.0-MEI and SOL Driver 6.0.0.1179D
Intel Rapid Storage AHCI Driver for Windows 32 bit 9.6.0.1014
Conexant Audio Software for Windows 7/Vista and XP 4.95.48.0(Win7/Vista)/3.66.146.0(XP)
ThinkVantage Active Protection System 32bit 1.72
ThinkPad UltraNav Utility 2.13
ThinkPad Power Manager 1.88
ThinkVantage Communications Utility 1.42
ThinkVantage Access Connections for Windows XP 5.72
Presentation Director 4.56
ThinkPad Hot Key Features Integration Package Setup 3.11.0001
Intel Wireless WiFi Link for Windows XP 13.03.0000
Thanks for any help or advice!

OK, that makes sense. That is the driver for the controller for the hard drive?
I double checked in Device Manager. I was at 9.6.0.1014.
According to the Lenovo site that is the latest. I also checked the Intel site and it also listed that same version as the latest.
So I did a Rolback of the driver. That seemed to go with no problems.
Restarted. Got the same error on that .....crmlog file during startup.
So I went back in and now I turned Write Caching back ON for my C: drive.
Restarted. No error on ...crmlog this time. I'll keep running and see if any more pop up.
I think I'm also going to look for some Lenovo diagnostics that run under Windows. I think I saw those.
Does the ThinkPad BIOS Update Utility US that also got installed on 10/29 actually update my BIOS?
That was the other area that looked concerning.
I'll keep you posted. I think we are on the right path here. Although I did have some hard drive trouble when I first got the machine in August. The tech I worked with said that there had been some known problems with the hard drives (320GB) in these machines. But it seems to have run fine since I got past that.
I'll keep you posted.

After applying SP21 the web dynpro is not working (WDTypeNotFoundException)

Hi
We have recently applied SP21 to our NW04 system.
The patch was successfully applied. But while accessing the Web Dynpro, we are getting WDTypeNotFoundException exception.
The Error Message is as follows :
+500 Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
Hide
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
500 Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
Hide
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDTypeNotFoundException: type jp.co.companyname.projectname.pp.fnp09.datapreparemodel.types.Ru_cnfind not found
at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:224)
at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:318)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.addAttribute(NodeInfo.java:517)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.addAttribute(NodeInfo.java:530)
at jp.co.companyname.projectname.pp.fnp09.main.RawMaterialView.wdDoModifyView(RawMaterialView.java:191)
... 28 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; .NET CLR 1.1.4322)
Version
DOM version
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, Build ID: 6.4021.00.0000.20070905102710.0000 (release=630_VAL_REL, buildtime=2007-09-19:20:40:15UTC, changelist=460812, host=PWDFM026)
J2EE Engine 6.40 patchlevel 109749.313
Java VM Java HotSpot(TM) Server VM, version:1.4.2_13-b06, vendor: Sun Microsystems Inc.
Operating system Windows 2003, version: 5.2, architecture: x86
Other
Session Locale ja
Time of Failure Mon May 17 18:35:52 JST 2007 (Java Time: 1197884152810)
Web Dynpro Code Generation Infos
companyname.co.jp/pp~fnp09
SapDictionaryGenerationCore 6.4010.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-12-09:22:23:41UTC, changelist=280522, host=PWDFM026.wdf.sap.corp) +
If you have any ideas please let me know.
thanks and Regards
Raghunahth L

Hi raghu,
You can go to Visual administrator (/usr/sap/<SID>/JCxx/j2ee/admin--go.bat)
Give administrator credentials..
Cluster-Server-Services-webdynpro Runtime.
See if it is stopped.You can see red croos,if it is stopped.If it is,
Right click on Webdynpro Runtine and start.
One more option,you can give a try is start all teh srvices manually through
telnet
This can be done with "run' command on you system
telnet <IP adress> telnet port
telnet port will be http port ending with 8.
then give administrtaor credentials.
then go with these commands,
jump 0
add deploy
list_app
start_app-all
Try looki in for detailed error messages in default trace and application logs.
Loc : /usr/sap/<SID>/JCxx/j2ee/cluster/server0/log
Regards
Usha

After applying the firmware update the phone stopp...

My N900 can connect to the internet (I can search in goodle or download and install packages with no issues) but it cannot connect to Skype account. Error message: Authentication failed. It was connecting to Skype just fine before the update. I tried to re-enter the password, of course. I do not want to delete the Skype account and create a new one just yet: I have all my contacts set up already and I am afraid I will loose those merges between Skype and the phone's address book if I delete the existing Skype account. Maybe anyone has any suggestions on what can I try first?

Care to elaborate?
Meanwhile I created a new account in Skype and added it to my N900 without deletign the old one. And guess what: it is not signing in and not even giving any error messages.

How do I get my laptop fixed after 6 weeks of waiting for parts that work??

I've been waiting 6 weeks for my laptop to be repaired...this time. The first time it was a week and the problem was not solved. I have a Macbook Pro that started randomly rebooting. It kept getting worse and worse until it wouldn't even complete a boot up, it just went into a cycle of reboots until it finalyy ended with a kernal error. They replaced my AirPort card which didn't solve the problem. My authorized service provider received replacement parts twice, and both times the parts were faulty so they are STILL waiting. I took matters into my own hands, which meant 2 1/2 hours on hold, no that is not a typo, I waited on hold for two and one-half hours with Apple. I spoke to a human twice, and each time asked for a supervisor or manager who could make a decision and solve my problem, but please don't put me back into the hold queue. After nicely saying they would not, they of course did put me into the hold queue...twice. I just want my computer back!!! The Apple commercials say "they just work", but they don't. If this was a pc, I could drive to my local Best Buy and purchase any replacement part, install it myself in an hour or two, then get back to doing what I need to do, but not with an Apple!!!! Thank goodness I purchsed the Apple Care or I would really be toast. From what I've read on the boards, this is a well known, common problem, so why isn't Apple doing everything possible to keep from ticking off so many people?
I just got off the phone with someone at Apple, after a total of 3.5 hours on the phone, and of couse he has to call people to find out what to do, so it is STILL going to be a couple of days, both of which he will be out of the office so someone else will take care of contacting the powers-that-be. So my question is, what can I do to escalate this matter besides hiring an attorney? Is there some magical department I can call or some supreme being I can email to get some help before I lose faith in all things Apple???? I'm afraid at this point I've had to tell people who ask me how I like my MAC that I would never in a million years purchase one again because the survice is so incredibly horrible and way too traumatic. Who at Apple can I complaign to and have it mean somethings?
Thanks for any suggestions you can offer...

I had a similar waiting time when I sent my iMac G5 in to a Service Provider to get the optical drive fixed. It has to do with - the part takes so much time to get to the Service Provider then if its faulty, they have to resend for a new one. From my experience I would be calling the Service Provider and keeping up on them and the progress. If you need to, ask them how to speed things up. My Service Provider told me to phone Apple to give authority to speed up the shipping to 2-day instead of a week (it is something only the user can ask Apple for) or to ask them to loan me another computer till they get it fixed if it is going to take a lot longer. I called Apple, the lady at Apple put me on hold and gave me to her supervisor who then got the Service Provider on the phone to verify and then told me the part would be there within 2-3 days. It came and was finished, but it took a month before I became wise that nothing was happening at the Service Provider's end "We are waiting for the part" they kept telling me, but they just forgot to order the second one. I found all this out from Apple. There was nothing shipping to the Service Provider at the time nor had there been a second order for the part. The Service Provider did not even tell Apple the first one was faulty. It is called miscommunication and it happens from time to time.
I would make sure you tell Apple how long your computer has been in the shop and always sound professional and polite to whoever is on the other end and ask for that shipping speed up. Phone your Service Provider first to get the proper name that it is called!
It sounds like you got a lemon being taken care of by a Service Provider which automatically takes longer because of shipping. If it is not fixed when you get it back phone Apple first. Hope this helps you.

HT201270 iOS: Updating your carrier settings

This thing does nothing good to my iPhone 4 with iOS 6. When iTunes prompt me for this settings update, I update it and voila, my internet connection was lost. I call the customer service of my carrier and their advise is to restart my iphone. Now it is ok. How come the Cellular Data Network button lost after this carrier settings? Please advice...frankism (Qatar-Qtel)

frankism wrote:
How come the Cellular Data Network button lost after this carrier settings?
Ask your carrier, their the ones that control that setting.

Iphone 5S:carrier settings

My carrier settings has been updated to LTE when i connected to itunes. But LTE has not yet been made available in INDIA. How to revert back to 3G?

I am not sure if it would work but its worth a try.
1.Make a backup of your phone in itunes.
2.Settings - General - Reset - Erase all content and settings
I think that should remove the carrier settings update as well
Then without restoring first check the option whether it allows you to use 2g.
Then you can restore and incase the settings come back after restore then again
Settings - General - Reset - Erase all content and settings
and this time setup your phone as new.
You can also try to restore your phone from itunes installing a fresh ios and then ignoring the carrier settings update.
It might work.

Clearing out archivelogs from Flash_recovery_area after applied on Standby.

I set up a standby database using data guard in 11g. I used the flash_recovery_area to store archivelogs, but really the true destination of all my archivelogs should and is my standby database. I didnn't have any other backup(s) setup yet. After few days, my database stopped because it ran out of space in flash_recovery_area. I had to add more space to db_recovery_dest_size just to get the database back up. Then I set the archivelog deletion policy in rman to delete archivelogs after applied on all standby.
Is that all I need to do keep my flash_recovery_are clean enough to prevent from locking my database again, or is there something else I need to do? This is just a dev box, and I'm trying to stay away from setting up rman backup process with delete option.
Thanks in advance,
Kyle

Kyle;
Sorry because I'm not answering the question you asked. But I had the same problem with a similar setup.
What I decided was to use RMAN to backup the primary and have the RMAN script remove archive after a week.
On the standby I created an RMAN script to remove archive only.
There's not much to it and at the end I add a seperate remove empty folder script.
echo "Starting RMAN..."
$ORACLE_HOME/bin/rman target / catalog <user>/<password>@<catalogdb> << EOF
delete noprompt ARCHIVELOG UNTIL TIME 'SYSDATE-8';
exit
EOF
echo `date`
echo
echo 'End of archive cleanup on STANDBY'
mailx -s ${MAILHEADER} $MAILTO < /tmp/rmandbarchstandby.out
. /u01/app/oracle/dba_tool/bin/rmemptyfolders.sh ${DBNAME}
# End of Script

Task Sequence fails on "Apply Driver Package" when PXE-booting but not with bootable media

I have an issue where my Task Sequence fails during 'Apply Driver Package' when PXE-booting but works ok when booting from CD or USB-stick. It fails withe error code 0x80070002 and when pressing F8 and checking the ipconfig there's a 169.254.x.x address.
Somehow it looses it's real ip during the process.
I'm grateful for any advice!

Please enable verbose logging for Task sequence, then upload the smsts.log to Skydrive.
0x80070002 error is too generic, which cannot be used to determine the cause.
Juke Chou
TechNet Community Support

I have resetted all settings and contents , my phone doesnt work

after resetted all content and settings yesterday, my phone doesnt work, on screen there is only apply logo. how can i do? pls help

Howdy bakinur,
Welcome to Apple Support Communities.
The article below has several suggestions that can resolve the iPhone 4S start up issue that you described.
iOS: Not responding or does not turn on
Take Care.
-Jason

How can I cancel my contract with Verizon without any fees because Verizon has failed to provide me with a workable phone for over 2 months despite many hours talking to tech support and several replacement phones, batteries, power cord, and sim card etc

How can I contact a representative of Verizon to help me cancel my contract so I can switch carriers to get a phone that is reliable and a Co. that supports its products? Verizon seems to have many blocking scripts or dead ends when trying tio contact someone who can help the customer. How can I get around the blocks and get to someone who can directly answer my questions? I have one of those "hot" phones that were recently seen on the news, yet no one seems to be able to help me resolve the issue. I have no idea where this comment goes, or who reads it?
Jim R

The phone is your responsibility, if it's before the 1 year warranty you can get defects fixed by the Manufacturer of the phone. If you want to leave pay your termination fee, or find a carrier who claims they will do it but don't really expect it to happen either.

When will the stores have business workshops after the 5pm timeframe, for those that work can go to them?

When will apple stores have business/productivity workshops after the 5pm time weekdays for those that work?

You would need to talk to the store managers about that; we're just fellow users here. I would guess that they schedule workshops during the day when traffic is lighter so as to not impact and be impacted by evening retail traffice.
Regards.

Takes up to 5 min "Applying User Settings" with events ID 6005 6006 after a reboot - Win Server 2008 R2 Standard 64bit

Hi,
Has anybody seen the issue below showing in the logs? The time for the logs messages switch from the real time (17:57) to some random time (10:55). There seem to be a disconnect with the time. I noticed right when the status message while logging in switches
to "apply user settings", the time get screwed up on the gpsvc.log file and switches to the random time (10:55) and keeps reporting that random time till "apply user settings" process completes and switches back to regular real time (17:57).
I made sure the server is synced up with w32tm /resync command. Tried different DNS settings. Tried dis joining and rejoining to the domain. tried to block inheritance on GPMC to that OU. Created new domain user. Deleted local profiles. All with no luck and
same behavior which is taking up to 5 min "applying user setting" only after a reboot. If I log in and out without reboot, it would log in just fine within seconds.
Any thoughts or suggestions are appreciated!
Thanks,
Here is a copy from the gpsvc.log:
GPSVC(338.354) 17:57:08:406 -------------------------------------------
GPSVC(338.354) 17:57:08:406 Use the Event Viewer to analyze the Group Policy operational log for details on Group Policy service activity.
GPSVC(338.354) 17:57:08:406 -------------------------------------------
GPSVC(338.354) 17:57:08:406
GPSVC(338.354) 17:57:08:406 InitializeProductType: Product Type: 2
GPSVC(338.354) 17:57:08:406 Register for connectivity notification is Enabled.
GPSVC(338.354) 17:57:08:406 Connectivity manager class initialized with for IntranetAuth connectivity
GPSVC(338.354) 17:57:08:640 Target = Machine
GPSVC(338.350) 17:57:08:640 Target = Machine, ChangeNumber 0
GPSVC(338.39c) 17:57:09:232 bMachine = 1
GPSVC(338.39c) 17:57:09:232 Setting GPsession state = 1
GPSVC(338.27c) 17:57:09:232 Waiting for connectivity before applying policies
GPSVC(338.27c) 17:57:09:232 Waiting for SamSs with timeout 8264
GPSVC(338.39c) 17:57:09:232 Message Status = <Applying computer settings...>
GPSVC(338.39c) 17:57:09:232 Target = Machine
GPSVC(338.39c) 17:57:09:232 Target = Machine, ChangeNumber 0
GPSVC(338.39c) 17:57:09:248 Setting GPsession state = 1
GPSVC(338.27c) 17:57:09:357 Waiting for NTDS.IndexRecreateEvent with timeout 8139
GPSVC(338.27c) 17:57:09:357 Waiting for NlaSvc with timeout 8139
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 1
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:591 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:591 UnLocked successfully
GPSVC(338.350) 17:57:09:591 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:591 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:591 Async Lock called
GPSVC(338.350) 17:57:09:591 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:591 Sid = (null)
GPSVC(338.350) 17:57:09:591 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:591 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:591 UnLocked successfully
GPSVC(338.350) 17:57:09:591 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:591 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:591 Async Lock called
GPSVC(338.350) 17:57:09:591 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:591 Sid = (null)
GPSVC(338.350) 17:57:09:591 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:591 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:591 UnLocked successfully
GPSVC(338.350) 17:57:09:591 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:591 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:591 Async Lock called
GPSVC(338.350) 17:57:09:591 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:591 Sid = (null)
GPSVC(338.350) 17:57:09:591 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:591 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:591 UnLocked successfully
GPSVC(338.350) 17:57:09:591 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:591 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:591 Async Lock called
GPSVC(338.350) 17:57:09:591 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:591 Sid = (null)
GPSVC(338.350) 17:57:09:591 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:591 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:591 UnLocked successfully
GPSVC(338.350) 17:57:09:669 Sid = (null)
GPSVC(338.350) 17:57:09:669 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:669 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:669 Setting lock state as notLocked
GPSVC(338.350) 17:57:09:669 UnLocked successfully
GPSVC(338.27c) 10:55:29:426 Waiting for NETLOGON with timeout 6392
GPSVC(338.27c) 10:55:29:426 Waiting for MUP with timeout 6392
GPSVC(338.27c) 10:55:29:426 Waiting for wkssvc to signal MUP event
GPSVC(338.5bc) 10:55:29:519 Target = Machine
GPSVC(338.5bc) 10:55:29:519 Target = Machine, ChangeNumber 0
GPSVC(3b0.67c) 10:55:29:535 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x16c
GPSVC(3b0.67c) 10:55:29:535 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(338.5bc) 10:55:29:535 Target = Machine
GPSVC(3b0.67c) 10:55:29:535 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(3b0.67c) 10:55:29:535 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(338.6c4) 10:55:29:535 Target = Machine
GPSVC(338.5b0) 10:55:29:535 Target = Machine, ChangeNumber 0
GPSVC(338.5b0) 10:55:29:535 Sid = (null), dwTimeout = 600000, dwFlags = 268435456
GPSVC(338.5b0) 10:55:29:535 LockPolicySection called for user <Machine>
GPSVC(338.5b0) 10:55:29:535 Async Lock called
GPSVC(338.5b0) 10:55:29:535 Reader Lock got immediately. m_cReadersInLock : 1
GPSVC(338.5bc) 10:55:29:535 Sid = (null)
GPSVC(338.5bc) 10:55:29:535 UnLockPolicySection called for user <Machine>
GPSVC(338.5bc) 10:55:29:535 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.5bc) 10:55:29:535 Setting lock state as notLocked
GPSVC(338.5bc) 10:55:29:535 UnLocked successfully
GPSVC(338.754) 10:55:29:816 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xc18
GPSVC(338.754) 10:55:29:816 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(338.350) 10:55:29:816 Target = Machine
GPSVC(338.754) 10:55:29:816 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(338.754) 10:55:29:816 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(338.27c) 10:55:29:987 Done waiting for MUP
GPSVC(338.27c) 10:55:29:987 Waiting for DS with timeout 5830
GPSVC(338.27c) 10:55:29:987 Registered for NLA notification successfully
GPSVC(338.27c) 10:55:29:987 NlaGetIntranetCapability returned Not Ready error. Consider it as NOT intranet capable.
GPSVC(338.27c) 10:55:29:987 There is no connectivity. Waiting for connectivity again...
GPSVC(338.27c) 10:55:30:455 There is connectivity.
GPSVC(338.27c) 10:55:30:455 We have network connectivity... proceeding to apply policy.
GPSVC(338.27c) 10:55:30:455 NlaQueryNetSignatures returned 1 networks
GPSVC(338.27c) 10:55:30:455 Found a intranet+auth network
GPSVC(338.27c) 10:55:30:455 # of interfaces : 1
GPSVC(338.27c) 10:55:30:455 Interface ID: {9538E3E7-197E-4A34-82B6-F457DC25D35D}
GPSVC(338.27c) 10:55:30:455 Compartment ID: 1
GPSVC(338.27c) 10:55:30:455 Setting the CompartmentId [1] on the current thread
GPSVC(338.27c) 10:55:30:455 GetDomainControllerConnectionInfo: Enabling bandwidth estimate.
GPSVC(338.27c) 10:55:30:502 Started bandwidth estimation successfully
GPSVC(338.27c) 10:55:30:502 GetDomainControllerConnectionInfo: Getting Ldap Handles.
GPSVC(338.27c) 10:55:30:502 GetLdapHandle: Getting ldap handle for host: DC-MLIB.DOMAIN-NAME in domain: DOMAIN-NAME.
GPSVC(338.27c) 10:55:30:502 GetLdapHandle: Server connection established.
GPSVC(338.27c) 10:55:30:502 GetLdapHandle: Binding using only kerberos.
GPSVC(338.27c) 10:55:30:518 GetLdapHandle: Bound successfully.
GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\dskquota.dll.
GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for gptext.dll.
GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\iedkcs32.dll.
GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\iedkcs32.dll.
GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for gptext.dll.
GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\iedkcs32.dll.
GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for gptext.dll.
GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for gptext.dll.
GPSVC(338.27c) 10:55:30:518 ProcessGPOs: No site name defined. Skipping site policy.
GPSVC(338.27c) 10:55:30:518 GetGPOInfo: ********************************
GPSVC(338.27c) 10:55:30:518 GetGPOInfo: Entering...
GPSVC(338.27c) 10:55:30:533 GetMachineToken: Looping for authentication again.
GPSVC(338.27c) 10:55:30:580 GetMachineToken: Looping for authentication again.
GPSVC(338.27c) 10:55:30:596 GetMachineToken: InitializeSecurityContext failed with 0x80090324
GPSVC(338.27c) 10:55:30:596 GetGPOInfo: Failed to get the machine token with -2146893020
GPSVC(338.27c) 10:55:30:596 GetGPOInfo: Leaving with 0
GPSVC(338.27c) 10:55:30:596 GetGPOInfo: ********************************
GPSVC(338.27c) 10:55:30:596 ProcessGPOs: GetGPOInfo failed.
GPSVC(338.27c) 10:55:30:596 ProcessGPOs: No WMI logging done in this policy cycle.
GPSVC(338.27c) 10:55:30:596 ProcessGPOs: Processing failed with error -2146893020.
GPSVC(338.27c) 10:55:30:596 ProcessGPOs: Boot/Logon Policy processing - checking if UBPM trigger events need to be fired
GPSVC(338.27c) 10:55:30:596 CheckAndFireGPTriggerEvent: Fired Policy present UBPM trigger event for Machine.
GPSVC(338.27c) 10:55:30:596 Application complete with bConnectivityFailure = 0.
GPSVC(338.27c) 10:55:30:596 Application complete with bConnectivityFailure = 0.
GPSVC(338.4d0) 10:55:32:281 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xd94
GPSVC(338.4d0) 10:55:32:281 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(338.4f0) 10:55:32:281 Target = Machine
GPSVC(338.4d0) 10:55:32:281 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(338.4d0) 10:55:32:281 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(338.384) 10:55:32:281 Target = Machine, ChangeNumber 0
GPSVC(338.384) 10:55:35:900 SID = S-1-5-21-1599696121-1964574698-334091239-301107
GPSVC(338.384) 10:55:35:900 bMachine = 0
GPSVC(338.384) 10:55:35:900 Setting GPsession state = 1
GPSVC(338.384) 10:55:35:900 Message Status = <Applying user settings...>
GPSVC(338.6c4) 10:55:35:900 Setting GPsession state = 1
GPSVC(338.718) 10:55:35:900 StartTime For network wait: 11200ms
GPSVC(338.718) 10:55:35:900 Current Time: 19546ms
GPSVC(338.718) 10:55:35:900 MaxTimeToWaitForNetwork: 7034ms
GPSVC(338.718) 10:55:35:900 TimeRemainingToWaitForNetwork: 0ms
GPSVC(338.718) 10:55:35:900 UserPolicy: Waiting for machine policy wait for network event with timeout 0 ms
GPSVC(338.718) 10:55:35:915 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 65538
GPSVC(338.718) 10:55:35:915 LockPolicySection called for user <Machine>
GPSVC(338.718) 10:55:35:915 Sync Lock Called
GPSVC(338.718) 10:55:35:915 Reader Lock got immediately. m_cReadersInLock : 1
GPSVC(338.718) 10:55:35:915 Lock taken successfully
GPSVC(338.718) 10:55:35:915 UnLockPolicySection called for user <Machine>
GPSVC(338.718) 10:55:35:915 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.718) 10:55:35:915 Setting lock state as notLocked
GPSVC(338.718) 10:55:35:915 UnLocked successfully
GPSVC(338.718) 10:55:35:915 GetDomainControllerConnectionInfo: Enabling bandwidth estimate.
GPSVC(338.718) 10:55:36:430 Started bandwidth estimation successfully
GPSVC(338.718) 10:55:36:430 GetDomainControllerConnectionInfo: Getting Ldap Handles.
GPSVC(338.718) 10:55:36:430 GetLdapHandle: Getting ldap handle for host: DC-MLIB.DOMAIN-NAME in domain: DOMAIN-NAME.
GPSVC(338.718) 10:55:36:430 GetLdapHandle: Server connection established.
GPSVC(338.718) 10:55:36:430 GetLdapHandle: Bound successfully.
GPSVC(338.718) 10:55:36:430 ProcessGPOs: Computer's domain is same as user's domain so using user's domain DC
GPSVC(338.718) 10:55:36:430 GetLdapHandle: Getting ldap handle for host: DC-MLIB.DOMAIN-NAME in domain: <Unspecified>.
GPSVC(338.718) 10:55:36:430 GetLdapHandle: Server connection established.
GPSVC(338.718) 10:55:36:446 GetLdapHandle: Bound successfully.
GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\dskquota.dll.
GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for gptext.dll.
GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\iedkcs32.dll.
GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\iedkcs32.dll.
GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for gptext.dll.
GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\iedkcs32.dll.
GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for gptext.dll.
GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for gptext.dll.
GPSVC(338.718) 10:55:36:446 ProcessGPOs: No site name defined. Skipping site policy.
GPSVC(338.718) 10:55:36:446 GetGPOInfo: ********************************
GPSVC(338.718) 10:55:36:446 GetGPOInfo: Entering...
GPSVC(338.718) 10:55:36:446 SearchDSObject: Searching <OU=People,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 10:55:36:446 SearchDSObject: Found GPO(s): < >
GPSVC(338.718) 10:55:36:446 SearchDSObject: Searching <DC=ad,DC=*****,DC=****>
GPSVC(338.718) 10:55:36:446 SearchDSObject: Found GPO(s): <[LDAP://CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=ad,DC=*****,DC=****;0]>
GPSVC(338.718) 10:55:36:446 ProcessGPO: ==============================
GPSVC(338.718) 10:55:36:446 ProcessGPO: Deferring search for <LDAP://CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 10:55:36:446 EvaluateDeferredGPOs: Searching for GPOs in cn=policies,cn=system,DC=ad,DC=*****,DC=****
GPSVC(338.718) 10:55:36:446 ProcessGPO: ==============================
GPSVC(338.718) 10:55:36:446 ProcessGPO: Searching <CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 10:55:36:446 ProcessGPO: User has access to this GPO.
GPSVC(338.718) 10:55:36:446 ProcessGPO: GPO passes the filter check.
GPSVC(338.718) 10:55:36:446 ProcessGPO: Found functionality version of: 2
GPSVC(338.718) 10:55:36:446 ProcessGPO: Found file system path of: <\\DOMAIN-NAME\sysvol\DOMAIN-NAME\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}>
GPSVC(418.430) 17:59:09:821 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x3dc
GPSVC(418.430) 17:59:09:821 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(338.6b8) 17:59:09:821 Target = Machine
GPSVC(418.430) 17:59:09:821 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(418.430) 17:59:09:821 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(338.30c) 17:59:09:821 Target = Machine, ChangeNumber 0
GPSVC(418.430) 17:59:09:837 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x448
GPSVC(418.430) 17:59:09:837 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(338.30c) 17:59:09:837 Target = Machine
GPSVC(418.430) 17:59:09:837 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(418.430) 17:59:09:837 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(338.6b8) 17:59:09:837 Target = Machine, ChangeNumber 0
GPSVC(3b0.3c0) 17:59:11:085 CGPNotify::UnregisterNotification: Entering with event 0x16c
GPSVC(3b0.3c0) 17:59:11:085 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(3b0.3c0) 17:59:11:085 CGPNotify::UnregisterNotification: Canceling pending calls
GPSVC(3b0.3c0) 17:59:11:288 Client_CompleteNotificationCall: failed with 0x71a
GPSVC(3b0.3c0) 17:59:11:288 CGPNotify::UnregisterNotification: Cancelled pending calls
GPSVC(3b0.3c0) 17:59:11:288 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
GPSVC(338.30c) 17:59:12:380 Target = Machine
GPSVC(338.30c) 17:59:12:380 Target = Machine, ChangeNumber 0
GPSVC(338.30c) 17:59:13:051 Target = Machine
GPSVC(338.30c) 17:59:13:051 Target = Machine, ChangeNumber 0
GPSVC(338.30c) 17:59:13:285 Target = Machine
GPSVC(338.30c) 17:59:13:285 Target = Machine, ChangeNumber 0
GPSVC(338.5a0) 17:59:14:143 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xf04
GPSVC(338.5a0) 17:59:14:143 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(338.6b8) 17:59:14:143 Target = Machine
GPSVC(338.5a0) 17:59:14:143 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(338.5a0) 17:59:14:143 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(204.228) 17:59:59:897 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xb50
GPSVC(204.228) 17:59:59:897 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(338.6b8) 17:59:59:897 Target = Machine
GPSVC(204.228) 17:59:59:897 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(204.228) 17:59:59:897 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(338.718) 18:01:58:941 ProcessGPO: Found common name of: <{31B2F340-016D-11D2-945F-00C04FB984F9}>
GPSVC(338.718) 18:01:58:941 ProcessGPO: Found display name of: <Default Domain Policy>
GPSVC(338.718) 18:01:58:941 ProcessGPO: Found user version of: GPC is 1, GPT is 1
GPSVC(338.718) 18:01:58:941 ProcessGPO: Found flags of: 0
GPSVC(338.718) 18:01:58:941 ProcessGPO: Found extensions: [{3060E8D0-7020-11D2-842D-00C04FA372D4}{3060E8CE-7020-11D2-842D-00C04FA372D4}]
GPSVC(338.718) 18:01:58:941 ProcessGPO: ==============================
GPSVC(338.718) 18:01:58:941 ProcessLocalGPO: Local GPO's gpt.ini is not accessible, assuming default state.
GPSVC(338.718) 18:01:58:941 ProcessLocalGPO: GPO Local Group Policy doesn't contain any data since the version number is 0. It will be skipped.
GPSVC(338.718) 18:01:58:941 GetGPOInfo: Leaving with 1
GPSVC(338.718) 18:01:58:941 GetGPOInfo: ********************************
GPSVC(338.718) 18:01:58:941 GetGPOInfo: ********************************
GPSVC(338.718) 18:01:58:941 GetGPOInfo: Entering...
GPSVC(338.718) 18:01:59:097 SearchDSObject: Searching <OU=FM-Security Video Servers,OU=FM-Servers,OU=FM,OU=Department OUs,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:097 SearchDSObject: Found GPO(s): <[LDAP://cn={B957D759-2AF4-4592-95B8-5B7C62F9B340},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0]>
GPSVC(338.718) 18:01:59:097 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={B957D759-2AF4-4592-95B8-5B7C62F9B340},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 SearchDSObject: Searching <OU=FM-Servers,OU=FM,OU=Department OUs,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 SearchDSObject: Found GPO(s): <[LDAP://cn={E8A9990E-57AD-4B7B-BAE4-C56E20FB6314},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={251254DD-27DC-419F-816D-C51CDB309D8F},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0]>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={E8A9990E-57AD-4B7B-BAE4-C56E20FB6314},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={251254DD-27DC-419F-816D-C51CDB309D8F},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 SearchDSObject: Searching <OU=FM,OU=Department OUs,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 SearchDSObject: Found GPO(s): <[LDAP://cn={1A42DA26-38F9-491C-940B-9D37895BE92A},cn=policies,cn=system,DC=ad,DC=*****,DC=****;1][LDAP://cn={F3D0434D-3EFF-4713-908C-3D8AB8189FB9},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={F03FA73B-A5B5-496B-94E5-5315D1D8F5F3},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={386C2C68-BB18-483B-AF36-92E76C1178D2},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={3D83F7A1-D4C2-4F8E-8808-CD5415D5A91E},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={462C2912-2318-4F46-A082-8BCC07EBDA29},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={7690B141-A1C2-4381-BD63-1AF5C09B4456},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={62C29217-3E25-42FC-8469-78312109323E},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={E795AC88-A750-45AF-870C-7EEDF00AA64A},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={B7C7410F-A3C0-4F12-8C3A-245C317EDFBA},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={CE1F85C1-DF2D-4E34-898B-2D6E3D0B55BE},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={D1B4C3BE-41CD-41B2-8A26-BE2EFD6953D0},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={E2673882-F33C-4879-AE75-583829D8BDA8},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={074DE127-4DBA-43F2-9C19-5953AD76CE9F},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={F4BAB9C5-0B6E-426B-93D3-1950A7002DC7},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={4A2C73AF-509F-4434-AF58-1AB3888959B4},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0]>
GPSVC(338.718) 18:01:59:113 SearchDSObject: The link to GPO LDAP://cn={1A42DA26-38F9-491C-940B-9D37895BE92A},cn=policies,cn=system,DC=ad,DC=*****,DC=**** is disabled. It will be skipped for processing.
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={F3D0434D-3EFF-4713-908C-3D8AB8189FB9},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={F03FA73B-A5B5-496B-94E5-5315D1D8F5F3},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={386C2C68-BB18-483B-AF36-92E76C1178D2},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={3D83F7A1-D4C2-4F8E-8808-CD5415D5A91E},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={462C2912-2318-4F46-A082-8BCC07EBDA29},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={7690B141-A1C2-4381-BD63-1AF5C09B4456},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={62C29217-3E25-42FC-8469-78312109323E},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={E795AC88-A750-45AF-870C-7EEDF00AA64A},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={B7C7410F-A3C0-4F12-8C3A-245C317EDFBA},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={CE1F85C1-DF2D-4E34-898B-2D6E3D0B55BE},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={D1B4C3BE-41CD-41B2-8A26-BE2EFD6953D0},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={E2673882-F33C-4879-AE75-583829D8BDA8},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={074DE127-4DBA-43F2-9C19-5953AD76CE9F},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={F4BAB9C5-0B6E-426B-93D3-1950A7002DC7},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={4A2C73AF-509F-4434-AF58-1AB3888959B4},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 SearchDSObject: Searching <OU=Department OUs,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 SearchDSObject: No GPO(s) for this object.
GPSVC(338.718) 18:01:59:113 SearchDSObject: Searching <DC=ad,DC=*****,DC=****>

> GPSVC(338.350) 17:57:09:669 UnLocked successfully
> GPSVC(338.27c) 10:55:29:426 Waiting for NETLOGON with timeout 6392
The numbers in parenthesis are PID.TID of gpsvc.exe. So we see a thread
change, and this usually indicates that a different logon process has
begun. Could you try to map this log entries to events in the group
policy event log?
But to be honest: No, I've never seen such a behavior in gpsvc.log :(
I'm almost sure that a service is responsible, but how to identify it -
I don't know. There's no auditing for system time changes, AFAIK.
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-:

3g fails after applying carrier settings to a phone that worked since day 1

Similar Messages

Maybe you are looking for