3G-GPRS CONNECTION ALWAYS ON....

How do I stop the 3G/GPRS connection being always on. There is an option for 'Always when needed/available' but this doesn't make any difference.
Apparently this is down to certain applications set to connect automatically, but there doesn't seem to be a way to identify these....
Any help or tips will be greatly appreciated.

I have the same problem! I wish someone could solve this problem. I want the 'allow connection', 'allow connection for this session' and 'connect automatically' to reappear on my phone.
I clicked on 'connect automatically' once & this led to the 3G-GPRS connection always on problem. Just want the connection prompt to re-appear again!
Please help. Thx in advance.

Similar Messages

  • E61 GPRS connection not disconnecting

    Hello,
    I have recently updated my E61 to the latest firmware 3.xxx
    Now I have noticed a strange thing where built in email client does not disconnect from GPRS at all, unless I manually disconnect it.
    With previous firmware 2.xxx and my settings of "Check every 30 minutes" it would start connection, check email, then disconnect. Now, connection is always ON even though the setting is still set to every 30 minutes.
    Does anyone know why this is happening and how to make it behave as before, disconnecting after checking email?
    Any help will be appreciate it.
    Thanks

    This is simply an educated guess as I'm short on time right now, but will look into the issue in more depth later.
    Have you checked your connection options (tools, settings, connection)? There is an option for GPRS connectivity there. The available options will be 'When Available', and 'When Needed'. I'd start by checking the firmware update hasn't changed this option to When Available.
    If that is not the answer, I'll research the problem more thoroughly.
    All the best,
    Damion.

  • [28035] Error with a GPRS connection

    Hi to all,
    We always have this problem using GPRS connection calling the sync web service with HTTPS protocol whereas HTTP is always functionning (on both mode : GPRS/wired).
    System.Data.SqlServerCe.SqlCeError: Internal error: HTTP header information is either corrupted or missing in the transport message. It could be a network transmission error or an IIS problem.<u5:p></u5:p>
    \tError Code =28035<u5:p></u5:p>
    \tHResult = -2147012746
    Technical informations:
    PDA on Windows Mobile 6.5
    SQL CE 3.5 SP2
    Device : Motorola MC 65/55
    SQL Server 2008 R2
    We believe that the reverse proxy is involved because when the PDA is using wired connection, no reverse proxy is used because we are already in the company network. Indeed:
    GPRS mode : PDA <-> firewall <-> RP <-> Web servers <-> SQL Servers
    Wired mode : PDA <-> Web server <-> SQL Servers
    Didier.

    Nothing concrete, other than what bing can find:
    http://dbaspot.com/ms-sqlserver/216339-error-28035-header-information-either-corrupted-only-gprs-internet-works-why.html
    Please mark as answer, if this was it. Visit my SQL Server Compact blog http://erikej.blogspot.com

  • C7 GPRS connection staying forcefully active

    (C7-00,RM-675) I recently noticed that my GPRS connection, after the last update of the operating system o version 014.002.03.01, is no longer automatically closed after closing the application that opened the connection. Even when I am changing the connection settings to " always ask "   it will still not close the connection even when I am permitting the connection just for the current session......when I am setting the connection permissions to " automatically connect"  it is spontaneously starting a connection(is nokia starting to store location info of there users like APPLE is doing??) Does anybody recognize this problem?

    Well, not sure for C7 as I havent had too much time on an S^3 device, and as I usually have a 3rd party task manager to check all background processes. The Social app, or facebook and twitter widgets are also permanently connected to internet GPRS/3G unless you set the widgets to offline.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • GPRS Connection problem with Nokia 6230i

    Hi All,
    I am using the GPRS activated Vodafone sim for Nokia 6230i.
    I am not able to access the GPRS connection from my J2me application, it&#8217;s always shows me that "Subscribe GPRS first" but its already activated.
    When i change the sim & checked with nokia N-72, my application started working fine & able to make the proper http communication.
    What could be the problem?
    Do i need to do some extra settings for Nokia 6230i?
    Is Nokia 6230i having some problem while accessing HttpCommunication ?
    Please suggest me.

    Getting a gprs connection on series 40 phones is very difficult. You first need to create your own access point based on the gprs settings for the network you are using. You do this in settings -> Configuration -> Personal configuration settings -> add new
    I use the settings from
    http://www.filesaveas.com/gprs.html
    When you have entered in the data, press back and select preferred access point and select the one you created.
    I think then you should be able to use gprs in your application
    I test with google maps

  • My apple tv(3rd Gen) total screws. connection always break down, nothing changes on the setting!!! no movies, no iTunes, only seconds than it is gone!!

    One month after purchase and perfect functioning my apple Tv is screwed! I can not stream any content to since the connection always breaks down after second, also itunes etc cannot be accessed!!
    I did everything, changed Routher channels to all possible options(13 different and although everything worked before), resetted at the PC ( Was not possible to wifi, connection broke doWn), also resetted the Router. I switched of HD and all kinds off things, no sign of change!
    I found out that actually some apple TV's have a problem with the wifi chip, might be one of those?
    Contacted Apple, they are exchanging it against a used and repaired one?!?! Hello?! It is one month old!!!! No scratches!! And I still had to wait before they checked mine!!!
    I want a new one!! Support is an hilarious excuse for a company that sells this kind of quality image!!! I am hugely disappointed!!
    Did anyone else have this kind of problems?

    So you are having a network connection issue.  Have you run the network diagnositics to test the connection?  Have you trying using a wired connection to isolate if it is a WiFi issue?
    I can not stream any content to since the connection always breaks down after second
    How are you streaming?  AirPlay?  ATV menu?
    I can not stream any content to since the connection always breaks down after second, itunes etc cannot be accessed!!
    Is homesharing enabled?
    I did everything,
    Clearly you have not done everything since the problem has not been found.  Lets try to stick to reality here.
    I found out that actually some apple TV's have a problem with the wifi chip, might be one of those?
    It is not likely if you just bought it new.  You can google for the model numbers that were specificly recalled though if you want to check.
    Did anyone else have this kind of problems?
    A lot of the issues posted are network related.  Most come down to WiFi issues.  Streaming video rarely works well over WiFi unless you have extremely high end WiFi hardware to support it.  Any streaming video product will work better connected via eithernet.

  • Sharing an Bluetooth Internet GPRS connection in MacOS and Windows...

    Hallo!
    I sucsessfully set up an Bluetooth Internet GPRS connection in MacOS and my phone (SE W880i) added "MyName's Mac" record into its list of trusted devices.
    Then I loaded Windows XP SP2 on the same computer and tried to set up Bluetooth Internet GPRS connection there: I paired devices and my phone has OVERWRITEN "MyName's Mac" record, created during MacOS setup, as I think because Bluetooth MAC adress remain the same...
    Internet is Windows XP worked fine until I rebooted my Mac back to MacOS where I tried to luanch recently created Bluetooth Internet GPRS connection. MacOS reported the it cannot initialize communication device... Then I reconfigured my phone in MacOS again and Internet worked fine until rebooting to Windows XP, which reported that it cannot open COM port because it's busy...
    Main clue of it is that I have to reinstall my Bluetooth Internet GPRS connection each time I load to different system either MacOS or Windows...
    Could you please help my to obtain very needed friendship...

    Problem Sollution --- use Parallels Desktop for Mac 3 ...

  • Gprs connection between two mobile phones

    Hi
    is it possible to make a gprs connection between two mobile phones without a server(pc...)? when the answer "yes" please give me an exapmle...

    I'm not sure, I'm just connecting some facts. I'm talking about Siemens S55. It has implemented sockets (both client sockets and server sockets). The phone, when connected via GPRS has IP address (Siemens' netmonitor reports it..). But i've never tried to use server-socket on my mobile.
    So it seems that it is in fact possible on some handsets. (AFAIK nokia 6610 and similar does not support sockets...)

  • C3-00 Unwanted GPRS connections

    10-Oct-201107:42 PM
    After waiting on an answer in another topic I did put this under a new topic cause it was on a WLAN topic and the matter is the hard to controlled and unwanted GPRS connections of the C3-00
    Placed the 16th of october 2001
    All was set to "My action is required" in the GPRS and WiFi settings.
    So all the hints I have found in the topics were checked so all the connections are set to :ASK ME FIRST !  As well as the possible auto updates were cancelled !
    Question 1-4:
    Is there any setting in the C3-00 for a WiFi / GPRS connection set on the SIM-card ??
    Question 2-4 :
    Are ALL the settings for a WiFi / GPRS connection on the C3-00 placed on the PHONE's memory ?
    I have two SIM's
    One for prepaid in a Finnish Network. GPRS installed via SMS of the operator
    One for prepaid in a Dutch Network. GPRS installed via SMS of the operator
    The Finnish SIM works as it should with GPRS : ON when needed OFF when browser is closed.
    As well in Holland as in Finland ! In Finland -Elisa- and Holland in roaming -VodaFone- .
    The Dutch SIM is connecting at once and after disconnecting it comes up again in short time !
    It is only tested in Holland not yet roaming in Finland.
    Question 3-4:
    Would it be possible that the operator is starting a GPRS connection ?
    Because they "know" that you installed the GPRS possibility on "their" network number.
    There are a few fact's in this matter who don't leave the networks out of the problem cause.
    Question 4-4 :
    Would it be possible to analyse the recieved auto-SMS for setting up a GPRS connection ?
    Thanks in advance
    Chris7207 from Holland

    Looks like this matter is to big to handle in this forum. After 10 days in this topic no answer as wel as in the C03-00 Wlan topic.
    Fact is that the only goal is to get attention for the matter wich had in the c03-00 Wlan more then 200 reactions. Wich is at least three times more then other highnumbered topics.
    In my opinion it is not the way it should be treated by Nokia !
    It's not so long ago that Nokian laatua oli hyvaa!
    Prove that it still is !

  • How to make gprs connected in a whole day without ...

    How to make gprs connected in a whole day without opening any internet surfing application in nokia x6 (16gb)?
    please help me...or how to keep gprs connection for long time...without any application opened...

    Dinhorocks wrote:
    How to make gprs connected in a whole day without opening any internet surfing application in nokia x6 (16gb)?
    please help me...or how to keep gprs connection for long time...without any application opened...
    Yes.. you may follow what jimmyireland has suggested... but just for curiosity and if you do not mind... why would you need this ???

  • Wifi connection alway disconnect after update to iOS6

    After update to iOS6 for a month, I found the wifi connection alway disconnect and need to reconnect severaly times. Plese help to suggest for setting up.

    Hello there cyldevil,
    I would recommend using this article if the Wifi is grayed out in settings.
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    Here is also some additional info on troubleshooting wifi in general on your device from iOS: Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/ts1398
    Be sure that you are in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.If unable to do so, see this article.
    Confirm that your Wi-Fi router and Cable or DSL modem are connected to power, turned on, and indicate that they are connected to the Internet.If not, refer to your network administrator or ISP for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you are connected. Then tap > and Forget this Network. Try to connect to your desired Wi-Fi network again.
    Note: You will need to enter your Wi-Fi password again if your desired network requires one.
    Turn your Wi-Fi router off and then on again2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2.For AirPort Base Stations, see this article for information about firmware updates.
    All the best,
    Sterling

  • Share GPRS Connection between two phones

    Hey.. was just curious if its possible to share a gprs connection from one mobile.. say N73 to some other mobile say N95 via bluetooth .. I know we can share the internet connection of a PC to a mobile over bluetooth but .. is it possible to do so between two mobiles?
    It would be great if there's some 3rd party app which actually makes this possible!

    Technically it can be done.
    But I don't know til now an application which do this.
    There is some apps for WiFi but not for GPRS.
    May be you have to post your suggestion to some 3rd party companies or may be it's time for you to develop your own application.
    You have many choices for programming: C++, Python, Java, ...
    Good luck friend

  • How To Activate GPRS connection programmatically?

    guys i need help with activating a GPRS or opening a GPRS connection... im creating a GMAIL client for mobile phones... and i still dont know how to activate GPRS to connect to pop.gmail.com... do u have references or ebooks that could help? thanks in advance!

    Try opening a socket, or use the JavaMail API and try to connect it to J2ME.
    However, you don't really activate hardware within Java, you create a network or device object and Java connects that to the native implementation and hands off to the OS which then drives the hardware.

  • Uploading a text file to a server using gprs connection and http method

    Hi,
    I want to upload a text file from my windows mobile device( WM 6.1 version) to a server using the gprs connection and the http method. The application runs on IBM weme j9 VM.
    Anybody having done anything similar to this,please post a code snippet or provide helpful resources..
    Thanks in advance.
    Edited by: 803691 on Oct 20, 2010 3:50 AM

    Please give a response..
    I want to know whether there is a feasible solution for this in java..
    PLease provide code snippets for establishing gprs connection in java..

  • How to disable gprs connection on BB 8900?

    Hi,
    Anybody knows how to disable gprs connection on BB 8900?
    I don't want to get connected to gprs accidentally w/o knowing...
    Thanks!

    Sure I can! Please follow the steps below:
    From the home screen on the BlackBerry click Options > Mobile Network and then change Data Services to Off.

Maybe you are looking for

  • Error embed / insert Flash CS3 9.0 swf in Acrobat 8.1.2

    Goal: embed Flash swf file in Acrobat pdf. Software: Flash CS3 9.0, Acrobat Pro 8.1.2, Mac OS 10.5.2 (all updates applied as available 3/27/08). If it matters: Quicktime Player 7.4.1. All swf files are associated to open with Flash Player 9 (9,0,115,

  • Photoshop crashing/Adobe Bridge

    Photoshop CC crashed about a month ago while trying to complete a batch process from Adobe Bridge CC. Now whenever I try to open Photoshop or a PSD file, Photoshop attempts to "recover" these damaged files, it freezes up the program, as well as my co

  • Bandwidth monitoring on a Catalyst 2960

    Hello all, I'm working with two Catalyst 2960 switches and I would like to know if there is a way to monitor bandwidth on individual ports. Ideally I would like to have one graph showing a bandwidth usage reading on each port. I tried using the Netwo

  • DNB integration with FSCM SAP Credit management

    Hi, Any body worked on or integrated  DNB  with FSCM SAP Credit management ? if it is please share some information /document on integration. Thx DD

  • AppServer 9 and Policy Agent?

    Hello reader! I'm stuck with basics :(. Where is the documentation for Application Server 9 Policy Agent? How do I configure an application to login via Access Manager (for example Calendar Client from the Blueprints)? I'm really lost right now, I fi