3G interface resets but signal looks good
Hi All,
can anyone explain what this means.I have enabled the following debugs. everytime I look at it there is no issue with the signal. But my guess is the router interface is resetting due to the signal. Can anyone explain if its due to 3G signalling
Router 881G
CELLULAR:
DATA debugging is on
DM debugging is on
ASYNC debugging is on
RDM debugging is on
CALLBACK debugging is on
PPP:
PPP authentication debugging is on
PPP protocol errors debugging is on
PPP protocol negotiation debugging is on
BAP:
BAP negotiation debugging is on
BAP error debugging is on
3688676: Mar 29 08:48:33.641 BRU: Ce0 PPP: Outbound ip packet dropped, line protocol not up
3688677: Mar 29 08:48:33.641 BRU: Ce0 PPP: Outbound ip packet dropped, line protocol not up
3688678: Mar 29 08:48:33.641 BRU: Ce0 PPP: Outbound ip packet dropped, line protocol not up
3688679: Mar 29 08:48:33.641 BRU: Ce0 PPP: Outbound ip packet dropped,
3688700: Mar 29 08:48:36.749 BRU: new DSR value received, 1
3688701: Mar 29 08:48:36.749 BRU: old value: handshakes->DSR= 1
3688702: Mar 29 08:48:38.741 BRU: %LINK-3-UPDOWN: Interface Cellular0, changed state to down
3688703: Mar 29 08:48:38.741 BRU: Ce0 PPP: Sending cstate DOWN notification
3688704: Mar 29 08:48:38.745 BRU: Ce0 PPP: Processing CstateDown message
3688705: Mar 29 08:48:49.326 BRU: new DSR value received, 1
3688706: Mar 29 08:48:49.326 BRU: old value: handshakes->DSR= 1
3688707: Mar 29 08:48:49.758 BRU: new DSR value received, 1
3688708: Mar 29 08:48:49.758 BRU: old value: handshakes->DSR= 1
3688709: Mar 29 08:48:56.582 BRU: %LINK-3-UPDOWN: Interface Cellular0, changed state to up
3688710: Mar 29 08:48:56.590 BRU: %DIALER-6-BIND: Interface Ce0 bound to profile Di1
3688711: Mar 29 08:48:56.590 BRU: Ce0 PPP: Sending cstate UP notification
3688712: Mar 29 08:48:56.594 BRU: Ce0 PPP: Processing CstateUp message
Cellular0 is up, line protocol is up
Hardware is 3G Modem-HSPA/UMTS/EDGE/GPRS-850/900/1800/1900/2100MHz / Global
Description: [cewan-phy]
MTU 1500 bytes, BW 5760 Kbit/sec, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, LCP Open
Open: IPCP, loopback not set
Keepalive not supported
Interface is bound to Di1 (Encapsulation PPP)
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 2d03h
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: Class-based queueing
Output queue: 0/1000/0 (size/max total/drops)
30 second input rate 0 bits/sec, 0 packets/sec
30 second output rate 0 bits/sec, 0 packets/sec
53671 packets input, 15696493 bytes, 0 no buffer
Received 0 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
62119 packets output, 13733542 bytes, 0 underruns
0 output errors, 0 collisions, 5 interface resets
0 unknown protocol drops
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
Hardware Information
====================
Modem Firmware Version = K2_0_7_19AP C:/WS/F
Modem Firmware built = 10/26/09
Hardware Version = 1.0
International Mobile Subscriber Identity (IMSI) = 206012210378433
International Mobile Equipment Identity (IMEI) = 359109030082750
Integrated Circuit Card ID (ICCID) = 8932002100084586363
Mobile Subscriber International Subscriber
IDentity Number (MSISDN) =
Factory Serial Number (FSN) = D57138003301002
Modem Status = Online
Current Modem Temperature = 46 deg C, State = Normal
PRI SKU ID = 9993165, SKU Rev. = 1.0
Profile Information
====================
Profile password Encryption level: 7
Profile 1 = ACTIVE*
PDP Type = IPv4
PDP address = <ip address masked>
Access Point Name (APN) = internet.proximus.be
Authentication = None
Username: , Password: 02
* - Default profile
Data Connection Information
===========================
Data Transmitted = 10775742 bytes, Received = 12294276 bytes
Profile 1, Packet Session Status = ACTIVE
IP address = <ip address masked>
Profile 2, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 3, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 4, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 5, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 6, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 7, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 8, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 9, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 10, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 11, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 12, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 13, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 14, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 15, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 16, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Network Information
===================
Current Service Status = Normal, Service Error = None
Current Service = Combined
Packet Service = HSPA (Attached)
Packet Session Status = Active
Current Roaming Status = Home
Network Selection Mode = Automatic
Country = BEL, Network = PROXI
Mobile Country Code (MCC) = 206
Mobile Network Code (MNC) = 1
Location Area Code (LAC) = 2603
Routing Area Code (RAC) = 208
Cell ID = 20324
Primary Scrambling Code = 466
PLMN Selection = Automatic
Registered PLMN = BEL PROXIMUS , Abbreviated = PROXI
Service Provider =
Radio Information
=================
Radio power mode = ON
Current Band = WCDMA 2100, Channel Number = 10588
Current RSSI = -84 dBm
Band Selected = Auto
Number of nearby cells = 1
Cell 1
Primary Scrambling Code = 0x1D2
RSCP = -84 dBm, ECIO = -2 dBm
Modem Security Information
==========================
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of Retries remaining = 3
Hi Marco,
Connection goes down intermittently and it stays up for very long time, more than a day some time or some time certain no of hours. I am not running any ping. I am not sure about the timing it takes between IPCP is completed ("IPCP: State is Open") and the link is closed ("I TERMREQ").
IOS c880data-universalk9-mz.151-1.T1.bin
Model 881G
One of my friend said there is a bug on 881G router IOS not sure about it though, but he hasnt seen my debug output.
This is the bug he was saying but I am not sure if mine is related to that as my CHAT script dont seem to be time out.
Problem Code: Error Messages, Logs, Debugs Software Version: C880DATA-universalk9-mz.151-2. Problem Details: Customer is running traffic over the 3card in a 881G. It fails however I can see from "show cell 0 all" that the modem has 3G coverage and a good signal as the RSSI is good. However the chat script continues to timeout. The configuration has not changed and it has worked and fails intermi
Thanks in Advance for your help
I have attached the debug of the CHAT script when the link goes down and come back.
3706575: Apr 1 08:51:03.995 BRU: Ce0 PPP: Outbound ip packet dropped, line protocol not up
3706576: Apr 1 08:51:03.995 BRU: Ce0 PPP: Outbound ip packet dropped, line protocol not up
3706577: Apr 1 08:51:03.995 BRU: Ce0 PPP: Outbound ip packet dropped, line protocol not up
3706578: Apr 1 08:51:03.995 BRU: Ce0 PPP: Outbound ip packet dropped, line protocol not up
3706579: Apr 1 08:51:03.999 BRU: Ce0 PPP: No remote authentication for call-out
3706580: Apr 1 08:51:03.999 BRU: Ce0 LCP: Event[Timeout-] State[Closing to Closed]
3706581: Apr 1 08:51:03.999 BRU: Ce0 LCP: Event[DOWN] State[Closed to Initial]
3706582: Apr 1 08:51:03.999 BRU: Ce0 PPP: Phase is DOWN
3706583: Apr 1 08:51:04.007 BRU: %LINEPROTO-5-UPDOWN: Line protocol on Interface Cellular0, changed state to down
3706584: Apr 1 08:51:06.007 BRU: %LINK-5-CHANGED: Interface Cellular0, changed state to reset
3706585: Apr 1 08:51:06.011 BRU: Ce0 DDR: has total 0 call(s), dial_out 0, dial_in 0
3706586: Apr 1 08:51:06.011 BRU: %DIALER-6-UNBIND: Interface Ce0 unbound from profile Di1
3706587: Apr 1 08:51:06.011 BRU: Ce0 PPP: Sending cstate DOWN notification
3706588: Apr 1 08:51:06.011 BRU: Ce0 PPP: Processing CstateDown message
3706589: Apr 1 08:51:06.015 BRU: Di1 DDR: No free dialer - starting fast idle timer
3706590: Apr 1 08:51:07.015 BRU: Di1 DDR: No free dialer - starting fast idle timer
3706591: Apr 1 08:51:08.015 BRU: Di1 DDR: No free dialer - starting fast idle timer
3706592: Apr 1 08:51:09.083 BRU: Di1 DDR: No free dialer - starting fast idle timer
3706593: Apr 1 08:51:10.083 BRU: Di1 DDR: No free dialer - starting fast idle timer
3706594: Apr 1 08:51:11.083 BRU: %LINK-3-UPDOWN: Interface Cellular0, changed state to down
3706595: Apr 1 08:51:11.083 BRU: Ce0 PPP: Sending cstate DOWN notification
3706596: Apr 1 08:51:11.083 BRU: Di1 DDR: No free dialer - starting fast idle timer
3706597: Apr 1 08:51:11.087 BRU: Ce0 PPP: Processing CstateDown message
3706598: Apr 1 08:51:12.083 BRU: Di1 DDR: No free dialer - starting fast idle timer
3706599: Apr 1 08:51:13.083 BRU: Di1 DDR: No free dialer - starting fast idle timer
3706600: Apr 1 08:51:14.083 BRU: Di1 DDR: No free dialer - starting fast idle timer
3706601: Apr 1 08:51:15.083 BRU: Di1 DDR: No free dialer - starting fast idle timer
3706602: Apr 1 08:51:16.083 BRU: Di1 DDR: No free dialer - starting fast idle timer
3706603: Apr 1 08:51:17.083 BRU: Di1 DDR: No free dialer - starting fast idle timer
3706604: Apr 1 08:51:18.083 BRU: Di1 DDR: No free dialer - starting fast idle timer
3706605: Apr 1 08:51:19.083 BRU: Di1 DDR: No free dialer - starting fast idle timer
3706606: Apr 1 08:51:20.083 BRU: Di1 DDR: No free dialer - starting fast idle timer
3706607: Apr 1 08:51:21.011 BRU: Ce0 DDR: re-enable timeout
3706608: Apr 1 08:51:21.083 BRU: Ce0 DDR: rotor dialout [best] least recent failure is also most recent failure
3706609: Apr 1 08:51:21.083 BRU: Ce0 DDR: rotor dialout [best] also has most recent failure
3706610: Apr 1 08:51:21.083 BRU: Ce0 DDR: rotor dialout [best]
3706611: Apr 1 08:51:21.083 BRU: Di1 DDR: Nailing up the Dialer profile [attempt 16]
3706612: Apr 1 08:51:21.083 BRU: Di1 DDR: Dialer dialing - persistent dialer profile
3706613: Apr 1 08:51:21.083 BRU: Ce0 DDR: Dialing cause Persistent Dialer Profile
3706614: Apr 1 08:51:21.083 BRU: Ce0 DDR: Attempting to dial cellprofile1
3706615: Apr 1 08:51:21.083 BRU: CHAT3: Attempting async line dialer script
3706616: Apr 1 08:51:21.083 BRU: CHAT3: Dialing using Modem script: cellprofile1 & System script: none
3706617: Apr 1 08:51:21.083 BRU: CHAT3: process started
3706618: Apr 1 08:51:21.083 BRU: CHAT3: Asserting DTR
3706619: Apr 1 08:51:21.087 BRU: CHAT3: Chat script cellprofile1 started
3706620: Apr 1 08:51:21.087 BRU: CHAT3: Sending string: ATDT*99***1#
3706621: Apr 1 08:51:21.087 BRU: CHAT3: Expecting string: CONNECT
3706622: Apr 1 08:51:21.091 BRU: CHAT3: Completed match for expect: CONNECT
3706623: Apr 1 08:51:21.091 BRU: CHAT3: Chat script cellprofile1 finished, status = Success
3706624: Apr 1 08:51:23.171 BRU: %LINK-3-UPDOWN: Interface Cellular0, changed state to up
3706625: Apr 1 08:51:23.171 BRU: Ce0 DDR: Dialer statechange to up
3706626: Apr 1 08:51:23.175 BRU: %DIALER-6-BIND: Interface Ce0 bound to profile Di1
3706627: Apr 1 08:51:23.175 BRU: Ce0 DDR: Dialer call has been placed
3706628: Apr 1 08:51:23.175 BRU: Ce0 PPP: Sending cstate UP notification
3706629: Apr 1 08:51:23.179 BRU: Ce0 PPP: Processing CstateUp message
3706630: Apr 1 08:51:23.183 BRU: PPP: Alloc Context [852C2C68]
3706631: Apr 1 08:51:23.183 BRU: ppp23 PPP: Phase is ESTABLISHING
3706632: Apr 1 08:51:23.183 BRU: Ce0 PPP: Using dialer call direction
3706633: Apr 1 08:51:23.183 BRU: Ce0 PPP: Treating connection as a callout
3706634: Apr 1 08:51:23.183 BRU: Ce0 PPP: Session handle[AE000017] Session id[23]
3706635: Apr 1 08:51:23.183 BRU: Ce0 LCP: Event[OPEN] State[Initial to Starting]
3706636: Apr 1 08:51:23.183 BRU: Ce0 PPP: No remote authentication for call-out
3706637: Apr 1 08:51:23.183 BRU: Ce0 LCP: O CONFREQ [Starting] id 1 len 20
3706638: Apr 1 08:51:23.183 BRU: Ce0 LCP: ACCM 0x000A0000 (0x0206000A0000)
3706639: Apr 1 08:51:23.183 BRU: Ce0 LCP: MagicNumber 0xE74DCDE6 (0x0506E74DCDE6)
3706640: Apr 1 08:51:23.183 BRU: Ce0 LCP: PFC (0x0702)
3706641: Apr 1 08:51:23.183 BRU: Ce0 LCP: ACFC (0x0802)
3706642: Apr 1 08:51:23.183 BRU: Ce0 LCP: Event[UP] State[Starting to REQsent]
3706643: Apr 1 08:51:23.191 BRU: Ce0 LCP: I CONFREQ [REQsent] id 7 len 25
3706644: Apr 1 08:51:23.191 BRU: Ce0 LCP: ACCM 0x00000000 (0x020600000000)
3706645: Apr 1 08:51:23.191 BRU: Ce0 LCP: AuthProto CHAP (0x0305C22305)
3706646: Apr 1 08:51:23.191 BRU: Ce0 LCP: MagicNumber 0x813CA39C (0x0506813CA39C)
3706647: Apr 1 08:51:23.191 BRU: Ce0 LCP: PFC (0x0702)
3706648: Apr 1 08:51:23.191 BRU: Ce0 LCP: ACFC (0x0802)
3706649: Apr 1 08:51:23.191 BRU: Ce0 LCP: O CONFACK [REQsent] id 7 len 25
3706650: Apr 1 08:51:23.191 BRU: Ce0 LCP: ACCM 0x00000000 (0x020600000000)
3706651: Apr 1 08:51:23.191 BRU: Ce0 LCP: AuthProto CHAP (0x0305C22305)
3706652: Apr 1 08:51:23.191 BRU: Ce0 LCP: MagicNumber 0x813CA39C (0x0506813CA39C)
3706653: Apr 1 08:51:23.191 BRU: Ce0 LCP: PFC (0x0702)
3706654: Apr 1 08:51:23.191 BRU: Ce0 LCP: ACFC (0x0802)
3706655: Apr 1 08:51:23.191 BRU: Ce0 LCP: Event[Receive ConfReq+] State[REQsent to ACKsent]
3706656: Apr 1 08:51:23.191 BRU: Ce0 LCP: I CONFACK [ACKsent] id 1 len 20
3706657: Apr 1 08:51:23.191 BRU: Ce0 LCP: ACCM 0x000A0000 (0x0206000A0000)
3706658: Apr 1 08:51:23.191 BRU: Ce0 LCP: MagicNumber 0xE74DCDE6 (0x0506E74DCDE6)
3706659: Apr 1 08:51:23.191 BRU: Ce0 LCP: PFC (0x0702)
3706660: Apr 1 08:51:23.191 BRU: Ce0 LCP: ACFC (0x0802)
3706661: Apr 1 08:51:23.191 BRU: Ce0 LCP: Event[Receive ConfAck] State[ACKsent to Open]
3706662: Apr 1 08:51:23.199 BRU: Ce0 PPP: Queue CHAP code[1] id[1]
3706663: Apr 1 08:51:23.211 BRU: Ce0 PPP: Phase is AUTHENTICATING, by the peer
3706664: Apr 1 08:51:23.211 BRU: Ce0 CHAP: Redirect packet to Ce0
3706665: Apr 1 08:51:23.211 BRU: Ce0 CHAP: I CHALLENGE id 1 len 35 from "UMTS_CHAP_SRVR"
3706666: Apr 1 08:51:23.211 BRU: Ce0 PPP: Sent CHAP SENDAUTH Request
3706667: Apr 1 08:51:23.211 BRU: Ce0 LCP: State is Open
3706668: Apr 1 08:51:23.211 BRU: Ce0 PPP: Received SENDAUTH Response FAIL
3706669: Apr 1 08:51:23.211 BRU: Ce0 CHAP: Using hostname from interface CHAP
3706670: Apr 1 08:51:23.211 BRU: Ce0 CHAP: Using password from interface CHAP
3706671: Apr 1 08:51:23.211 BRU: Ce0 CHAP: O RESPONSE id 1 len 41 from
3706672: Apr 1 08:51:23.219 BRU: Ce0 CHAP: I SUCCESS id 1 len 4
3706673: Apr 1 08:51:23.219 BRU: Ce0 PPP: Phase is FORWARDING, Attempting Forward
3706674: Apr 1 08:51:23.223 BRU: Ce0 PPP: Phase is ESTABLISHING, Finish LCP
3706675: Apr 1 08:51:23.223 BRU: Ce0 PPP: Phase is UP
3706676: Apr 1 08:51:23.223 BRU: Ce0 IPCP: Protocol configured, start CP. state[Initial]
3706677: Apr 1 08:51:23.223 BRU: Ce0 IPCP: Event[OPEN] State[Initial to Starting]
3706678: Apr 1 08:51:23.223 BRU: Ce0 IPCP: O CONFREQ [Starting] id 1 len 22
3706679: Apr 1 08:51:23.223 BRU: Ce0 IPCP: Address 0.0.0.0 (0x030600000000)
3706680: Apr 1 08:51:23.223 BRU: Ce0 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000)
3706681: Apr 1 08:51:23.223 BRU: Ce0 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000)
3706682: Apr 1 08:51:23.223 BRU: Ce0 IPCP: Event[UP] State[Starting to REQsent]
3706683: Apr 1 08:51:23.227 BRU: %LINEPROTO-5-UPDOWN: Line protocol on Interface Cellular0, changed state to up
3706684: Apr 1 08:51:24.223 BRU: Ce0 IPCP: I CONFNAK [REQsent] id 1 len 16
3706685: Apr 1 08:51:24.223 BRU: Ce0 IPCP: PrimaryDNS (0x81060A0B0C0D)
3706686: Apr 1 08:51:24.223 BRU: Ce0 IPCP: SecondaryDNS (0x83060A0B0C0E)
3706687: Apr 1 08:51:24.223 BRU: Ce0 IPCP: O CONFREQ [REQsent] id 2 len 22
3706688: Apr 1 08:51:24.223 BRU: Ce0 IPCP: Address 0.0.0.0 (0x030600000000)
3706689: Apr 1 08:51:24.227 BRU: Ce0 IPCP: PrimaryDNS (0x81060A0B0C0D)
3706690: Apr 1 08:51:24.227 BRU: Ce0 IPCP: SecondaryDNS (0x83060A0B0C0E)
3706691: Apr 1 08:51:24.227 BRU: Ce0 IPCP: Event[Receive ConfNak/Rej] State[REQsent to REQsent]
3706692: Apr 1 08:51:25.231 BRU: Ce0 IPCP: I CONFNAK [REQsent] id 2 len 16
3706693: Apr 1 08:51:25.231 BRU: Ce0 IPCP: PrimaryDNS (0x81060A0B0C0D)
3706694: Apr 1 08:51:25.231 BRU: Ce0 IPCP: SecondaryDNS (0x83060A0B0C0E)
3706695: Apr 1 08:51:25.231 BRU: Ce0 IPCP: O CONFREQ [REQsent] id 3 len 22
3706696: Apr 1 08:51:25.231 BRU: Ce0 IPCP: Address 0.0.0.0 (0x030600000000)
3706697: Apr 1 08:51:25.231 BRU: Ce0 IPCP: PrimaryDNS (0x81060A0B0C0D)
3706698: Apr 1 08:51:25.231 BRU: Ce0 IPCP: SecondaryDNS (0x83060A0B0C0E)
3706699: Apr 1 08:51:25.231 BRU: Ce0 IPCP: Event[Receive ConfNak/Rej] State[REQsent to REQsent]
3706700: Apr 1 08:51:25.423 BRU: Ce0 IPCP: I CONFREQ [REQsent] id 2 len 4
3706701: Apr 1 08:51:25.423 BRU: Ce0 IPCP AUTHOR: Done. Her address 0.0.0.0, we want 0.0.0.0
3706702: Apr 1 08:51:25.423 BRU: Ce0 IPCP: O CONFACK [REQsent] id 2 len 4
3706703: Apr 1 08:51:25.427 BRU: Ce0 IPCP: Event[Receive ConfReq+] State[REQsent to ACKsent]
3706704: Apr 1 08:51:25.427 BRU: Ce0 IPCP: I CONFNAK [ACKsent] id 3 len 22
3706705: Apr 1 08:51:25.427 BRU: Ce0 IPCP: Address (0x0306B2904FF3)
3706706: Apr 1 08:51:25.427 BRU: Ce0 IPCP: PrimaryDNS (0x810651A93C6B)
3706707: Apr 1 08:51:25.427 BRU: Ce0 IPCP: SecondaryDNS (0x830651A93C6B)
3706708: Apr 1 08:51:25.427 BRU: Ce0 IPCP: O CONFREQ [ACKsent] id 4 len 22
3706709: Apr 1 08:51:25.427 BRU: Ce0 IPCP: Address (0x0306B2904FF3)
3706710: Apr 1 08:51:25.427 BRU: Ce0 IPCP: PrimaryDNS (0x810651A93C6B)
3706711: Apr 1 08:51:25.427 BRU: Ce0 IPCP: SecondaryDNS (0x830651A93C6B)
3706712: Apr 1 08:51:25.427 BRU: Ce0 IPCP: Event[Receive ConfNak/Rej] State[ACKsent to ACKsent]
3706713: Apr 1 08:51:25.443 BRU: Ce0 IPCP: I CONFACK [ACKsent] id 4 len 22
3706714: Apr 1 08:51:25.475 BRU: Ce0 IPCP: Address (0x0306B2904FF3)
3706715: Apr 1 08:51:25.475 BRU: Ce0 IPCP: PrimaryDNS (0x810651A93C6B)
3706716: Apr 1 08:51:25.475 BRU: Ce0 IPCP: SecondaryDNS (0x830651A93C6B)
3706717: Apr 1 08:51:25.475 BRU: Ce0 IPCP: Event[Receive ConfAck] State[ACKsent to Open]
3706718: Apr 1 08:51:25.475 BRU: Ce0 IPCP: State is Open
3706719: Apr 1 08:51:25.475 BRU: Di1 IPCP: Install negotiated IP interface address
3706720: Apr 1 08:51:25.479 BRU: Ce0 DDR: dialer protocol up
3706721: Apr 1 08:51:25.479 BRU: Di1 DDR: Persistent Dialer Profile nailed up successfully
Cheers
Raj
Similar Messages
-
Difficulty downloading episodes from your feed, but everything looks good :(
So I've just started up a podcast and I'm trying to get it in to iTunes, but can't for the life of me figure out what the problem is.
The feed is here: http://theinquisitiveatheists.com/podcast.xml
It has a single episode, and I can subscribe using the test 'subscribe' in iTunes, but when I try to play, it won't play the episode.
The first ep is ~70mb. I run my own web server (cPanel) and have confirmed byte-range downloading is enabled.
I've successfully downloaded/subscribed using other podcast programs, like ePodder.
Any help is appreciated.
Update: Figured it out. I had spaces in the file name. That works for other programs, but iTunes apparently hates spaces. Remvoing them and replacing with hyphens fixed the issue.That's right: spaces are not allowed in URLs - this is an absolute rule. Browsers can usually cope by substituting the code %20 for eachspace when requesting the URL but iTunes doesn't and thus sees the URL as ending at the first space.
-
M2v looks good but shows artefacts after build
Hello everybody,
I have a rather strange problem with some mpeg files.
- I exported movies from fcp as DVfiles (footage was also shot in DV)
- I used compressor 3.01 to make MPEG2 m2v's
- with 2pass VBR and 6.9 MBit/s
- I am using ac3 audio with 384kHz (5.1)
The footage looks good in DVSP
The footage looks good in QT (7.2.0) and any other "player" on the MAC
BUT
it has some more or less bad looking blocks / artefacts showing after I built the project and watch it with the apple dvd player.
What am i missing here?
Thanks for any advice!
TimoHello, yes I am playing it at normal size. No fullscreen.
It really seems to be an "Apple DVD Player" problem, i tried with and without de-interlacing, removing all sorts of quicktime components (because i thought sth might interrupt the playback) and such but it is still the same.
(But it looks good on TV and -I hardly dare to say it- a fairly old windows laptop)
Well. maybe someone is more into the tech stuff and knows something else.
Thanks a lot for your help anyway.
Cheers,
T. -
When I use my Apple TV and try to play music from my computer I get an error: "To access your iTunes library on Apple TV, turn on Home Sharing in iTunes on your computer using 'myname'"
On my computer n iTunes Preferences / Sharing I have the "Share my library on my local network" checked with "Share entire library" -- no password, no update play counts. I've turned it off and on again.
The Apple TV settings show we are "talking to" my WIFI -- it has my network, shows a good signal strenght, all sorts of internet addresses and IP stuff I don't understand ...
The "Internet" tab works with some of those things I'd never use -- like I see the current NHL standings.
My TV works and I get an ATV signal and those little chimes / bongs when I hit things in the menu. And when it works I get audio so the cables and TV are okay.
In the past I had trouble with the settings for my favourite Internet Radio stations (the provider changed their URL but Apple didn't update the presets for a while) but those are now resolved.
I had a crappy old G class router and week signal strenght but I have a new N class Cisco router with a strong signal.
But other things are wonky:
* I play interent radio and my station will go fine for about five minutes then stop -- the little wheel spins trying to reconnect. Sometimes it resets but more often than not it won't. I just tried again four hours later and the same thing.
* I've unplugged the ATV and plugged it back in but no noticable improvement
* I tried to do the factory reset from the ATV menu. It says it will download the latest bla bla bla and after a few minutes tells me "Apple TV can't download latest update right now, try again later" -- I've tried three times today always with the same results.
* I unhooked it from the power and HDMI and plugged it into a Micro USB cable and plugged that into my Mac -- it doesn't show up in the devices in iTunes.
* I have a bunch of photos in a folder that I use for my ATV Screen Saver. A few weeks ago I added two photos to that folder -- they don't show up in the ATV screen show but the others still do.
* When I started today I checked my iTunes and the airplay icon didn't show in the bottom right (beside the genious icon and the little thing to show or hide the sidebar). Now I noticed the Airplay icon is there. When I try to switch from playing through my computer speaakers to my Apple TV I get an error "An unknown error (-15006) occurred while connecting to the Airplay device "Apple TV"" -- the ATV shows that Airplay is on.
* I see from the ATV settings that I'm running ATV Software 4.4.3 (3323) and when I do a "Update Software" on the ATV it tells me that my software is current.
* My iTunes is 10.5.2 (11) and my OS is 10.6.8 -- both are up to date.
Yikes and double yikes!
Any ideas?Hey Chunk,
I love the idea of the ATV more than I have loved the little black box but ... famous last words ... my ATV seems to be working better these days.
A big challenge for me was too many variables at play -- new router, new ATV OS / firmware / whatever, changing internet radio presets, a less than perfect physical set up ... and a short attention span from yours truly.
Here's what I did. Somwhere in these changes things got "fixed."
* I unhooked the ATV and did a factory restore by hard wiring the ATV to my computer with a micro USB cable (no external power needed) working through iTunes (I run iTunes 10.5.2 on an iMac with OS X 10.6.8).
* after the reset I now have ATV (is that an operating system or a firmware?) 4.4.4
* then I plugged it back into my home theatre and it didn't work :-) but in slightly different ways. The settings showed that I was connected to my home network but I couln't get connected using my Apple ID and no internet radio. (it is often counterintuitive -- like why when I want my ATV to talk to my iMac over my local network am I logging in to the iTnes Store with my Apple ID? but there you go.)
* I booked with the genius bar at the Apple Store and put my ATV in my pocket. They pulled out a TV, HDMI cable, ATV power source and even the remote -- all I provided was my little black ATV. We hooked the ATV to their TV and from the Apple Store (using thier WIFI) I logged in using my Apple ID and the thing worked fine.
* so now I knew that my ATV was up to date and it worked in the Apple Store using their network so it looked like the issue was my network.
* rebooted my router and noticed that when I had upgraded to the new super dooper Cisco n router we had plugged my iMac direct to the router via ethernet cable. I unhooked the ethernet and now just run my computer WIFI using AirPort.
And ...
It works. I use my ATV exclusivly for music -- my iTunes and internet radio and AirPlay -- and now both work fine. The ATV does pick up photos from my iPhoto for the screen saver and all that other stuff -- netflix, youtube, the hockey scores, ... all seem to be there. And my son played a video off his iPod Touch using AirPlay.
I know my approach is more scattered than a proper scientific try but ...
From my experience ... reset the ATV and get it up to date; see if it will work on someone else's network; check your network set up.
Good luck! -
rying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.
Does anyone know how to fix this?What EXACT version of Photoshop CS4 are you running? You should be on Photoshop CS4 v 11.0.2.
Also run Apple's software update to see whether it offers you the latest Epson update:
Printer Driver v9.33
Epson Stylus Pro 3880, Drivers & Downloads - Technical Support - Epson America, Inc.
MOST IMPORTANTLY: have Photoshop re-create its own Preferences:
To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.
Important: If you re-create the preferences by manually deleting the Adobe Photoshop CS6 Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
NEW Video! Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here:
How to Reset Photoshop CS6’s Preferences File | The Complete Picture with Julieanne Kost | Adobe TV
Mac OS
Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files. -
Final Cut Pro finished project looks good in FC but when I export The slugs appear as a Red screen any ideas?
You certainly are new at this. That's cool, we all were new at one point.
You have a MacBookPro. That means you are using at least Mac OS X 10.5.6. Otherwise FCS 3 would not even install. You also should have QuickTime 7 installed. If you don't, it's in the Additional Installs folder on the Mac OSX disc that came with your computer.
OS 2 is an ancient Microsoft/IBN product and doesn't run on a Mac and certainly won't run Final Cut.
Your camera shoots in AVCHD format. The files are MPEG 4 and should have been transcoded to ProRes LT for use in FCP. Your Sequence settings should also be ProRes LT to match the transcoded footage.
Your laptop is not a codec.
Wiki definition:
A codec is a device or computer program capable of encoding and/or decoding a digital data stream or signal. word codec is a portmanteau of 'compressor-decompressor' or, more commonly, 'coder-decoder'. A codec (the program) should not be confused with a coding or compression format or standard – a format is a document (the standard), a way of storing data, while a codec is a program (an implementation) which can read or write such files. In practice "codec" is sometimes used loosely to refer to formats, however.
Don't export using QuickTime Conversion. Export as Self Contained with Current Settings (same as your FCP Sequence, which by now is hopefully ProRes LT. Import that file into iDVD.
Better yet, learn DVD Studio Pro and Compressor. Both are included in Final Cut Studio and will give you far more control and much better results.
Whilst your video is encoding, take the time to read the user manuals found in the menu bar under the Help item. They contain a wealth of information and you can amaze the teacher and fellow students with your new found knowledge. -
Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect as expected (with a PIN); status bar looks good and shows Bluetooth active, and I even see the iPhone displays the battery levels of the wireless earbuds. But audio always comes out the speaker. (If I plug in wired headphones into the headphone jack then audio comes into the wired headphones, as expected.) I have rebooted the iPhone; I have had it forget about the wireless earbuds, and repaired and reconnected; I have reset all network settings. Thx in advance.
PS: I understand that more recent versions of iOS have a way to choose where audio output goes (speaker, headphone jack, Bluetooth device). Does this older version of iOS? I could not find an option or setting.I've noticed this lately as well, with my iPhone 4. I couldn't confidently pin it directly on any particular iOS update, but my iPhone used to automatically connect up via Bluetooth with my Prius's handsfree feature, and now it doesn't. I work with a CE-based device at my job, with Bluetooth capability, and I used to test out that feature by having it discover my iPhone. This no longer works either.
What I have found (not really a solution, but it does work and may be a clue for Apple) is that if I simply go to the Settings app then the General -> Bluetooth screen and let it sit there, it will pair right up with my car within a few seconds. Bluetooth is always on, and always says "Now Discoverable" at the bottom of the settings screen. -
Since I've instaled the Airpor express, everithing connected to it works properly, My wifi network signal is good and I able to browse with my mac air, bu with my I-phone 4S even though the signal apears to be good and on the it shows is connected to my wifi network I can't open any web-site, instead I keep getting the same message: "Cannot Open Page - Safari could not open the page because the server stopped responding.", wich is not true because I'm connected with my lap-top. The sound wifi system works perfectly but reggarding the wifi on my 4S I've tried changing through different chanels on the Airport (I saw people were having the same problem and aparently by changing the channels on the Airport the internet on the phone worked properly, but I'm still stuck with a brand new I-phone unable to opem my pages) I've also tried changing the Radio modes and still nothing.
Any suggestions?Since I've instaled the Airpor express, everithing connected to it works properly, My wifi network signal is good and I able to browse with my mac air, bu with my I-phone 4S even though the signal apears to be good and on the it shows is connected to my wifi network I can't open any web-site, instead I keep getting the same message: "Cannot Open Page - Safari could not open the page because the server stopped responding.", wich is not true because I'm connected with my lap-top. The sound wifi system works perfectly but reggarding the wifi on my 4S I've tried changing through different chanels on the Airport (I saw people were having the same problem and aparently by changing the channels on the Airport the internet on the phone worked properly, but I'm still stuck with a brand new I-phone unable to opem my pages) I've also tried changing the Radio modes and still nothing.
Any suggestions? -
Hello, I am interested in buying this week of a mac mini 2011 withintel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster 933HD monitor. How would it look better.... with the hdmi-dvi connection built in, buying a HDMI 1.3 cable and HDMI-making or buying an adapter hdmi display port - vga and connected through the port thunderbolt
ThanksI originally set up my mini with the included HDMI -> DVI adaptor to connect to a Sycmaster monitor. The graphics were very good.
-
good day please help me, my iphone 5 wont turn on. i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, so please help.me.
Please make a Genius Appointment and take it in for service. By now it probably cannot be fixed, but you never know.
-
Hello -
I've been sent HD footage in MTS format and converted it to Mp4 for editing in FCE. It looks good in FCE but when I export the movie, the quality is noticably diminished. Is there any way I can prevent FCE from lowering the quality on export?
Thanks.>I use Foxreal video converter for Mac to convert the MTS using the Apple intermediate codec setting and the problem is that I don't get image, just audio
My thought would be to NOT use Foxreal video converter.
Use MPEG Streamclip or Clipwrap.
-DH -
My subs look good in dvdsp but when I burn an example the subs are too high in the frame.All my offsets are 0 and the alignment button is bottom.
Any thoughtsTry creating a new project, and bring in a short clip and one or 2 subtitles and see if you see the same behavior. If you don't, something's probably wonky in the project. If the sample behavior has the same problem, if you want to send it to me with the associated media, I'll take a quick look.
My email is [email protected] -
Page looks good online but text won't show within Dreamweaver
I have modest website and the text for one of the subpages doesn't show within Dreamweaver, yet it looks good online. Here's the page in question:
www.acemon.com/basic-options.com
It passed in Validator.
A secondary problem is getting the container to actually fill the background. I'm sure it's something simple but I can't seem to catch it.
ThanksIf this is the correct URL, http://www.acemon.com/basic-options.html
Try this:
.container {
width: 832px;
background: #FFF;
color: #000;
margin: 20px auto 0 auto;
padding-bottom: 20px;
overflow:hidden; /**to contain floats**/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
I found an iphone 4 and i reset it everything went good. It told me to connect to itunes so i did (via windows 8) but it could not recognize it. Please help
I hope if I ever lose my phone that you find it snozdop and not ajackson15. Maybe ajackson15 will lose something of his/hers and then not get it back
-
Looks good in FCE but DVD looks bad
Hi Guys hope you can help, Have FCE, imports from sony handycam , everything looks good and tight in FCE but when exported to iDVD the finished product looks terrible, hard to describe but looks blurry, almost a ghosting to motion shots, this doesn't do it when I burn from iMovie, I've tried different setups in easy setup with no luck, However I did ( out of frustration) export back to tape and then import into iMovie and then burned from there and it looked much better, please help, thank you
Thank you for responding so quickly, I'm not sure what you require for spec on the Mac but it's a Mac Pro with Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 2 GB
OS isMac OS X 10.5.4, FCE is version 4, Quicktime is version 7.5, iMovie is version 7.1.4
Sony camcorder is DCR-SR42( 1/6 type) CCD 680,000 pixels, this is a non-tape type, internal harddrive. Note: I also have a Sony DCR TRV 310 tape type that FCE does see and able to control, Clip info says Compressor = DV/DVCPRO- NTSC Data rate = 3.6MB/sec
FCE doesn't see the Sony DCR-SR 42 camcorder when I connect ( via USB) but iMovie does, so I download into iMovie, clips come in as a .mov, clip info says 720x480, FCE clip info says : Creator =Quicktime Player, Compressor= Apple MPEG-2 SD camcorder Video, Data rate=1.2MB/sec, Frame size= 720x480, Vid Rate= 29.97 fps.
So files in iMovie, I open FCE and import files from iMovie , tried using the XLM export from iMovie and it does work however after doing compared testing on test DVD the imported files looked better than the XLMs. I have the easy setup using the DV-NTSC as that's the only one that comes close to what I'm using, same goes for when I export, I export using the Quicktime export with self contained off.
I have iDVD set to professional encoding, (ya I know , iDVD not that professional) when final burn is done and played on a DVD player on a LCD the finished video is really low resolution quality, the content is of a football game ( my sons) using tripod of coarse, but the images are rough, blockly, looks like really bad codec or wrong codec or wrong conversion type or too much compression. I have done other DVD's with iMovie from tape camera that look alot better than what I'm getting from FCE, Please help, what I'm I doing wrong, thank you
Maybe you are looking for
-
Regarding Additive Field In DSO
Hi Guys, I have one field as summation in DSO. I made it additive while creating the transformation. Can any one tell me how it will add a summation when i do a delta update. Thanks
-
Me and my daughter had been using the same apple id, she was triyng to change it, now all of my iphone contact are gone, what can i do ti get it back , this is very important to me.
-
what is a better external harddrive to use with final cut pro and also as a music storage and as a backup. i had read somewher the one could not do something in final cut with a firewire external hardrive but now I can't find it, so if anyone can ill
-
Thank you for your informative statement. However, I got some different problem. When I watch the videos, I could not have original colour. It seemed some RGB components had been biased and then the green color was dominant. What's happening? If you
-
Trying to burn a DVD Problems!!
I am tryin to burn a DVD from IDVD , when I insert the DVD in (creating your DVD) it tells me I have 1hour & 30mins. in time remaining , aprox. 30mins. into the burning process the DVD ejects & states ( multiplexing & burning with 1 hour left ) as m