3G is not working on my iphone5(while it is with the same sim in other device????)

Hellow everybody:
I'm a new owner of an Iphone 5, and the big problem is that the 3G is not working on my device. the logo "3G" appear normaly on the top of my screen. The operator confirmed that the 3G was well activated and it is like that.when i put the same SIM card in another phone, it works??
i saw trough the internet that a lot of people have the same problem. i've tried to reset the network settings....no way.
So please someone could tell me the solution?? i'll be very grateful

it was just due to a mistake in the internet access point settings

Similar Messages

My iPad, Macbook and Apple TV are all set up with the same iCloud email address. I bought the iPhone 6 and accidentally set the iCloud up with a different email. My phone will not let me change the email address to be the same as my other devices,

My iPad, Macbook and Apple TV are all set up with the same iCloud email address. I bought the iPhone 6 and accidentally set the iCloud up with a different email. My phone will not let me change the email address to be the same as my other devices, it tells me that email is already being used. How do I delete the iPhones iCloud account and reinstall it to match my other devices.

Yes it will, just sign out, then sign back in with the correct address.
Settings>iCloud>Sign Out.

JSR 172: error while invoking methods with the same signature

Hi
I am facing a peculiar problem which is not making sense to me. This is what I have done:
1. Written a simple web service that has two methods: sayHello and sayHellToMe. Both these methods have same signatures. They do not take in any parameter and return a string.
2. Deployed this web service (document/literal) type on Axis 1.2
3. Generated the stub classes from the wsdl file using Sun Wireless Toolkit's Stub Generator
4. I have now written a MIDlet that uses this stub class to invoke both the methods one after the other.
I enabled SOAPMonitor on Axis and saw the SOAP Request and SOAP Response messages. I observed the following:
1. In the first method: sayHello - everything works fine (with a few tweaks in the Stub class)
2. However, while invoking the second method sayHelloToMe, the SOAP Body tag in the SOAP Request does not contain any method name. I checked out the Stub class, the qnames and the types are all correct..
I also realized that this behavior is seen only when I have methods with the same signature in the web service. Any idea why this might be happening? It seems like a very weird problem.
Any help in this regard will be greatly appreciated.
Thanks,
Arati

Hi, I'm closing this thread and opening the same in another as the content got pasted in reader un friendly format and i'm unable to change the format.
Thanks,
Ravi.

Pages not loading anymore. I have tried reinstalling with the same results

I have iWork 09 on my MBP with the i7 (1 version back from the current model with the Thunderport). Software worked fine for many months but now when I try to start Pages or Keynote I get an error message saying it can not load the library. I tried to uninstall the software and reboot then reinstalled it and did an update to the app with the same results.

Deleting the program's preference list is the #1 trouble-shooting step with any misbehaving application. Go to HD > Users > (your account) > Library > Preferences, delete the com.apple.iwork.pages.plist, empty the Trash & then restart Pages. Repeat with Numbers & Keynote. This needs to be done for each user.
There are two things to do that solve a lot of problems with the iWork ’08 &/or ’09 apps in Snow Leopard.
First, use the
Mac OS 10.6.6 combo updater. This fixes a problem with fonts that is not fixed using the delta update (10.6.1 > 10.6.2). Because of font & other issues with 10.6.7, I prefer to stick with 10.6.6. You can find the 10.6.7 combo updater
here
Second, make sure your iWork applications are updated. For iWork '08 that is Pages 3.0.3 & Numbers 1.0.3. For iWork '09 it's Pages 4.0.5 & Numbers 2.0.5. If you're not running the latest versions & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. They must be in the iWork '08 or iWork '09 folder in Applications. That iWork folder must be named iWork '08 or iWork '09. If it doesn't have the '08 or '09 Software Update won't find them & the updaters won't work.
Also, when deleting iWork, you need to make sure you get all of the components.
The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on
his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.

If a podcast is not in iTunes store can it be restored with the same ID?

A friend had a working feed but for some reason it no longer exists in the iTunes store. Is it possible to restore the feed with the same id (so that existing subscribers will be able to continue subscribing) or will the feed need to be recreated completely?

This appears to be the feed:
http://thesniffer.libsyn.com/rss
It can be subscribed to in iTunes and appears to have no serious technical problems, though the FeedValidator report does throw up a few minor ones.
Though it doesn't seem to throw iTunes when subscribing, the 'title' tag reads
<title><![CDATA[thesniffer]]></title>
which I can't think is a good idea: the titles of the podcast and the episodes (which are formatted the same) should be in plain text: I don't know why Libsyn is formatting them like this, or whether it's likely to upset the iTunes Store (which is a different matter from iTunes when subscribing, and occasionally something will work in one but not the other).
It doesn't seem likely that any of the content-based reasons I quoted above, suggesting why a podcast might be rejected, apply in your case; though I've not listened to the episodes. Other than the formatting matter mentioned above I can't see any obvious reason for rejection.
She could try resbmitting this feed - she will probably need to make a small change to the title or she will be told the feed has already been submitted - this can be changed back once she's got the podcast accepted.

Help, my iphone do not charge. my two sons iphone charge perfectly with the same cable..

My iphone do not charge, my sons iphone charge perfectly with the same cable...?? Help Me..
It had about 10% batery left when it suddenly shot itselves off. and now when i try to charge it, it dosent work.... no life???
Help

Plug it in a wait for 15 minutes. If the charge indicator doesn't show, try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Tabs will not load sometimes unless I move the cursor or hold down an arrow button. If I close all tabs and reopen, it will work properly for a while then start doing the same thing. I've tried disabling add-ons but it does not help.

I've had this problem with earlier versions of Firefox. I am currently running the latest version which I think is 6.0.1. Firefox also is not responding a lot since the latest version update. I'm running Windows 7 Home Premium 64 bit.

I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

Facebook will not work on my laptop. it comes up with the toolbar at the top but no information loads up.

it is only on my laptop as i have tried my work computer and that is fine.

yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have any drivers
its driving me round the bend at the minute

TS4268 My facetime and imessage is not working in my iPad. I have used the same addresses many times and always been successful. Now will not sent message or connect? Any suggestions

My facetime and imessage not working on ipad2. I have used both up until today. Now not able to send or receive. I have phone 4s ad still has capability. What can I do. I have turned off both on both iPad and iPhone and restarted both but still nothing?

Without more specific information as to exactly what happens, you might want to start going through these troubleshooting support articles.
iOS: Troubleshooting FaceTime - Support - Apple
iOS: Troubleshooting Messages - Support - Apple

After updating and restoring to IOS5, i could not activate, because in Nepal i phone isworking with the gavey sim, how can i activate?

after updating to ios5 from ios4.3.3 , i could not activate because i am using Gavey sim with NTC( nepal telecom sim), now it asks for the original sim, which is not available in NEPAL, what to do? how can i activate Iphone4?

how old is the phone? was this the first time you are putting your sim in the iphone? if it is it might be locked to a previous carrier...if not, try to do a restore again and see if it picks up the sim card after. do the restore while the sim card is intact, and then not intact. otherwise, you'll might have to take it to an apple store to get it looked at.

HT2638 This is not working for me, it brings me back to the same error message and when I click on it the screen disapears, any help

need help

There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance. (And no, more exclamation marks do not get help faster or make your issue seem urgent. They just make it seem like you have a stuck key )

My iphone 4 is not working, yes I´ve tried to hold at the same time home and top button and nothing happens, tried to plugged into itunes same.. nothing, charged the battery...nothing Im so sad :(

as additional info, I did not realize the last update, I think is a brick because of that, please help!!

I dont know what you mean with "close your iphone" ??? I have a new problem... according to my 3G provider the humidity button is on, I SWEAR IT DIDNT GOT WET!!! how is that possible!!! Im so sad because they sad I have to buy another one also Im not as sure as I was before respect to a Iphone rules... what If this happens again? I was sooo happy with my iphone until this happens... I dont know what to do

I ve got a macBook with two different users. My husband wants to have all the music (our CDs which I copied to my user itunes library) on his new ipad which is registered on his name with itunes. But it does not work. Can we and if how have the same music

See question above in title.

There is no "adding" a device. Simply plug the iDevice into the computer. iTunes should automatically detect the device when it is connected.
iTunes can sync/manage as many iDevices as you want... there is no 1 device limit.

Photo booth not working correctly/ sound and image wont record at the same time

Everytime i record a video on my photobooth, the sound doesnt record at all. Either its that, or it does record but it doesnt record accordingly, so the sound is ahead of the video when i play it

Hi Mark,
From your example, it looks like you're implementing a JSP application? I'd strongly recommend using interMedia Java Classes for Servlet and JSPs. Using this Java library has many advantages over using the Web Agent. For example, you can write a single, integrated, pure Java application, without the need to manage a separate component, such the Web Agent, to handle the multimedia data. Another advantage over the Web Agent is better support for HTML forms, including textareas, field values greater than 255 characters, and so forth. Its also much easier to provide a better user interface, where text-based and media data can be mixed in one upload form, then validated and processed in a single step.
The Java class library ship with the Oracle9i 9.0.1 CDs. You can download a copy for use with Oracle8i 8.1.6/8.1.7 from the interMedia software page on OTN. Alongside the software download link, on this same page, you'll also find links to the README and the online Javadoc. In addition, there's also a link to the sample application kit. There's a servlet example and a JSP example, both of which implement a simple photo album application and illustrate how to use interMedia Java Classes for Servlet and JSPs to upload, process (create thumbnails) and retrieve images stored using the interMedia ORDImage type.
Hope this helps.
In order to better understand the variety of ways in which our customers are using interMedia, we'd be very interested in knowing a little more about your application, the interMedia functionality that you are using, and how you are developing and deploying your application. If you are able to help us, please send a short email message with some information about your application, together with any comments you may have, to the Oracle interMedia Product Manager, Joe Mauro, at [email protected] Thank you!
Regards,
Simon
null

The "up" and "down" arrows on the keybord do not work. Using them leads to "jumping anywhere", the same for pg up and pg down-keys.

The problem is (I think), linked to the Mozilla-browser, as it doesn't occur with I.E.
The problem persists when I use only the keybord: when using a moese, I can "wheel" up and down as usual.
I have removed Mozilla completely and reinstalled the latest version (3.6.13).
The problem persists.
Can anyone help me??
Many thanks.

Hit the '''F7''' key, you may have inadvertently turned on Caret browsing.
http://kb.mozillazine.org/Accessibility.browsewithcaret

3G is not working on my iphone5(while it is with the same sim in other device????)

Similar Messages

Maybe you are looking for