3g launch in UK in shambles due to O2 (in)activation
has anyone been able to connect to O2 network since yesterday, O2 has led this 3G launch in real shambles. I got a phone yesterday still waiting for network connection.
Just spotted this new addition to the iPhone page on the O2 website:
"The activation of the mobile service for new customers will be within 2 to 3 days given the volume of sales on Friday."
http://www.o2.co.uk/iphone?cmre=HeroBanner-_-Shop--iphone3GLaunch
Similar Messages
-
Problem description:
My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed).
EtreCheck version: 2.1.8 (121)
Report generated April 14, 2015 at 9:50:48 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (24-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR2 SDRAM 800 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 800 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 8800 GS - VRAM: 512 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.10.2 (14C1510) - Time since boot: 4 days 20:29:22
Disk Information: ℹ️
Hitachi HDS721010KLA330 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Mac iBook HD (disk0s2) / : 999.35 GB (521.60 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.SafariNotificationAgent.plist
[killed] com.apple.sbd.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
[killed] com.apple.warmd_agent.plist
11 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nesessionmanager.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.wdhelper.plist
[killed] org.cups.cupsd.plist
12 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.adobe.AdobeCreativeCloud.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[running] com.arubanetworks.via.NetworkMonitorLaunchd.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
ChronoSyncBackgrounder Application (/Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app)
Dropbox Application (/Applications/Dropbox.app)
Canon IJ Network Scanner Selector2 Application Hidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
Google Drive Application (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.1 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 [Click for support]
OVSHelper: Version: 1.1 [Click for support]
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
WebEx: Version: 1.0 [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS2 [Click for support]
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
VIA PrefPane [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
3% WindowServer
3% Mail
2% com.apple.iCloudHelper
1% Creative Cloud
1% Google Chrome
Top Processes by Memory: ℹ️
223 MB Google Chrome
150 MB Finder
129 MB Google Chrome Helper
112 MB Mail
69 MB Google Drive
Virtual Memory Information: ℹ️
35 MB Free RAM
1.45 GB Active RAM
1.45 GB Inactive RAM
888 MB Wired RAM
27.01 GB Page-ins
851 MB Page-outsWhen you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Hello all,I am having some issues with APP-V 5.
I am having particular issues with starting a packaged SIMS.net. I keep recieving:
"Application Failed to Launch. This may be due to a network failure 0x0FD01B25-0000007B"
...within a second or two of clicking on the app-v created shortcut for this software.
To clarify, I had this software working perfectly previously. I recreated this package due to a software update, but it fails to launch now. I started a new package from scratch as this is a complex piece of software with multiple installers to run etc.
To be honest, I keep seeing this error on other applications. At one point, nearly every published app returned the same error. I spent a day trying to diagnose but the following day, everything mysteriously started working again.
I have had a look on kirks blog & Tim Magan, but to no avail.
Any help would be greatly appreciated, as this is a 'business critical application' (as they say).
Quick overview of my setup:
- Single Server configuration (Management, Publishing & SQL) on Server 2012 VM in 2012 Hyper-V
- Win 2000 Domain with 2003 DC
- Windows 7 Enterprise SP1
- SIMS.net Summer 2013 sequenced on 32bit following best practice guide
- Deploying to 32 bit machine
- Client settings pushed by GPO. Powershell execution policy set to allsigned.RESOLVED: This error is caused by the "Program Files" missing from the "C:\ProgramData\Microsoft\Windows\Start Menu\" folder.
Firstly, a big thank you Nicke. You may not have solved the problem, but you sent me down the road to resolve this issue.
After trying the step you mentioned, I placed the computer in an OU with inheritance disabled. From this point onwards, I deduced that it was actually a group policy issue.
In my environment, I redirect start menus to generated start menu. This is created using a powershell script to combine locally installed items and network items. This scripts deletes the content of the 'programdata' start menu (i.e all users start menu)
to prevent these items disrupting the start menu.
Now... The app-v packages were breaking because, the 'Start Menu > Programs' folder did not exist. If an empty 'Start Menu > Programs' exists, the packages work correctly.
I can only assume that the two packages that were working correctly - that I installed these for 'current user only', rather than 'all users'.
It seems a little silly to me that app-v should fall over for something so simple. However, you could argue that it serves me right for playing about with system files :)
Thanks again for the help.
Mark -
I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch. All other components work normally. In Activity monitor it says Adobe switchboard failed to respond. Can anyone help solve this issue?
Release: 4/25/2012
http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx -
How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP? I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.
The new serial number is to the right of your chosen download.
-
Launching MX (ver 10) impossible - Due to Adobe?
In addition to my later posting I've now found out that something prohibit my installed MX Dir 10 to get into editing mode at all. I've uniinstalled the upgrade 11.5 version and my old MX 10 and re-installed MX 10. It launches to the splash screen (that captures and displays Adobes advertisment of ver 11.5) but the program hangs and after a while shut down it self.
I tried on another computer (without any installation of trial 11.5) and the MX 10 behaved just as same.
Am i missing something here? It cant be that Adobe have made it impossible to work with my old program, payed for and in good shape last time I used it. As we all dont know where Director is heading and I dont know how much I will use it in the future I've no plans to pay for any upgrade to 11.5 at the moment. But still I would very much like to be able to open and work with my old apps.
On the Aodbe site there is just one download concerning Director and that is the "have-to-pay-for 11.5" -one. Was there any other free upgrade before that to correct and adapt the old MX versions to Adobe trademark? If I cant use my old program and licence anylonger its a scandal I would say.
I sure hope that someone here would tell me more about this?
My best
MickeSorry forgot that. It's Win XP. Guess you're not an Adobe representative?
Anyway it ran without problem in XP before. It was some time I used it and probably before 11.5 was released. Noticed a differrence as the announcement of 11.5 turned up in the Splash window. That makes me wonder if Adobe made something that my MX reacts upon?
Thanks for asking.
BTW. Was very much involved in Director work during the 90ties and on a quite advanced level. Now it seems Flash has taken over everything and the only extra Director has is 3D-related. Is that correct to say? I'm not into 3D but like to wake up my old business again so right now I do Flash-studies. The sad thing is that all that Liingo-experience has to be replaced with the totally new script language of ActionsScript 3.
My best
Michael -
InDesign CS5 crashing on launch due to font auto-activator issue
I was having a problem where all the jobs I had been collecting would no longer open in InDesign CS5 without crashing on startup. Just found out today it has to do with the new feature in CS5 that reads fonts from your "Document Fonts" folder. Once I renamed the folder the files started opening up just fine again. Is there a way to disable that feature in InDesign, or has anyone else found another workaround that doesn't involve renaming the folder on every job I collect?
I'm sure it's a known issue by now, but I didn't see anything come up when I did a search.Same problem here. Whenever I want to open a packaged InDesign document which includes a Document Fonts folder containing some fonts which are identical to my system fonts (10.7.3 in my case) InDesign hangs. The best way to avoid these problems is to clean all system font folders and start managing fonts yourself. Check what fonts are needed for a certain document, avoid using fonts installed by the system. Although it is very generous from Apple, Adobe and Microsoft to give us a lot of fonts for free it is wise to manage them yourself. Check the following font locations:
~Library/Fonts
~System/Library/Fonts
~User/Library/Fonts (first make the Library visible: from within Terminal type the following command and press Return: chflags nohidden ~/Library)
Remove all fonts installed by Adobe (109 fonts) and Microsoft (154 fonts) to a differrent location. I manage them with FontExplorer 3.0 but you are ofcourse free to use any other font manager you prefer. Clear out any system font which is not needed by the system. Make sure the removed fonts can be enabled when needed. In FontExplorer you can create a set like 'Adobe CS5 Fonts' and put all Adobe fonts in there. This also counts for Apple system fonts which you remove. Create a new set in FontExplorer and call it OS Lion Fonts for example and move all fonts in there. I'd like to point out that I choose to manage fonts myself and I keep FontExplorer's capabilities to organaise fonts turned off (Preferences > Advanced > Organise font files). This way the Finder structure I use to manage my fonts (which is by foundry/designer) is maintained.
Clearing all unneeded fonts keeps the font list short and uncluttered which makes it easy to select fonts in InDesign or any other app. When you are designing things you want to make a selection of fonts you want to use in advance so keeping a lot of fonts available to the system is pointless in my opinion anyway.
Also, this process gets rid of a lot of fonts which you don't use/need like Chinese or whatever other language fonts. It shortens the font list dramatically. Setup font auto activation/deactivation so that fonts are disabled automatically after reboot or when you close a document to prevent the font list from growing out of proportions.
Below is the list of fonts which I keep installed/enabled by default in my ~System/Library/Fonts folder:
Apple Color Emoji.ttf
Apple Symbols.ttf
AppleGothic.ttf
Courier.dfont
Geneva.dfont
HelveLTMM
Helvetica LT MM
Helvetica.dfont
HelveticaNeue.dfont
HelveticaNeueDeskUI.ttc
Keyboard.ttf
LastResort.ttf
LucidaGrande.ttc
MarkerFelt.ttc
Menlo.ttc
Monaco.dfont
Symbol.ttf
Times LT MM
Times.dfont
TimesLTMM
ZapfDingbats.ttf
I haven't checked Times yet but I think it can be disabled. If you think Times is causing problems and you rather want to activate it yourself when it is needed or you want to use it you can remove it from the ~System/Library/Fonts folder. Drag the font to the desktop to make a copy first. Next trash the font file. Enter your admin password end you're done. If a font is needed by the system it gets restored automatically and you get a notification like "The system font 'HelveticaNeue.dfont' had been restored. This font was removed. Mac OS X needs this font to display text onscreen."
If you don't use FontExplorer you can use Onyx to clean font caches when you are done clearing out unwanted fonts. Always reboot afterwards.
Hope this helps. -
Launch BSP in PC UI when an action is activated in Sales Assistant Tab
Hi
I have come across detailed information on how to launch a BSP in a tab . However I am wondering if there is any way to launch a BSP when an action is activated in the sales assistant tab. In SAP gui it is easy to do by defining a custom method and using either a html control or function module . Any ideas how to achieve this in PC UI?
Thanks
ShariqaHello Shariqa,
can you describe detailed in what Application you whant to launch the BSP and do you want it to be shown in the Tab or started by clicking on a Button?
Regards
Gregor -
IChat "AIM server has temporarily limited your account due to too much activity."
I can't long on to iChat even after chaning my port 443. Other people here at work have been reported the same problem (three others that I know of). I've seen old post from stating the same problem with some resolve by just waiting for a couple days. Any know fixes by now?
I will add this: Yesterday I was sent a spam chat from a coworker and clicked on it. The link launched a web page but I didn't interact with it. Turns out, this coworker's AIM account was hacked. He's account is fine today but two other coworkers who were also sent the spam are in the same boat as me. However, a third person with this "too much activity" problem was not sent the spam. However, I did interact with him on iChat yesterday. Could I now be infected with a iChat virus or was my account hacked? I don't really know how to check.Hi,
AIM do suspend accounts for various reasons.
One reason is for being abusive in Chatrooms and other people complaining.
You probably need to start here
8:42 PM Wednesday; November 9, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Can not update exchange due to error with Active directory
Error:
The following error was generated when "$error.Clear();
Install-CannedRbacRoles -InvocationMode $RoleInstallationMode -DomainController $RoleDomainController
" was run: "Active Directory operation failed . This error is not retriable. Additional information: Access is denied.
Active directory response: 00000005: SecErr: DSID-031520B2, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
I have tried everything I can find on the web. any assistance would be appreciated. Thank you.I see now that you have logged into domain
Another thing, check if Allowed Inheritance is blocked on this account (bmoore)?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Could not use iphone due to problem when activating ...
Hi
thins morning I suddenly got activation needed message and it is not possible to activate my phone.
I tried a lot but get these messages every time I try ...
Your iPhone could not be activated because the activation server is temporarily unavailable.
There was a problem downloading the software for the iPhone. an unkown error occurred. (9006)
I put somethnig when I was angry but apple removed my previous post !
Please helpShe probably hacked/jailbroke it to unlock it. Ask her if she did. If she did you cannot get help here for jailbroken phones.
-
I've installed iTunes 8 but whatever I try it just won't launch, can anyone help??
Do you get any error message when you try to launch iTunes. If you don't get one open your task manager and look on the processes tab , do you see iTunes.exe running?
If so you have a particular type of launch failure that is often due to a problem with cryptographic services.
First you need to be sure your system is free of malware as this can cause the problem and interfere with a solution.
First a simple thing:
http://support.apple.com/kb/TS1776?viewlocale=en_US
But usually it is due to a problem with cryptographic services.
Check to see if you have your smart card service and that it is not set to disabled. For some reason iTunes needs it.
Start>>Run>>Services.msc
you should find the smart card service in the list. Report back with your findings.
Malware can interfere with cryptographic services and also pervert a resolution so it is important to check that your system is clean before proceeding: Run a virus and spyware scan with up to date definitions.
Then work through *Method 4* in the following link:
http://support.microsoft.com/kb/822798
You should be able to copy and paste the individual lines to save on typing.
Make a careful note of any error messages you get, they are important for diagnosis. Report back any error messages especially the names of any dlls mentioned.
If there are no errors try starting iTunes.
If you do not have the silent launch failure described above you need to do something different. -
Creating a landing page for a client with embedded video. She prefers not to embed a YouTube video on her site. Is there a way I can embed an mp4 file in her site so that it will play in firefox 3.6? Now it is trying to launch quicktime, which firefox blocks due to extension instability. Thx.
If you have the latest QuickTime version then it should work.
You can also look at players like JW Player: http://www.longtailvideo.com/
http://www.longtailvideo.com/support/jw-player/13/embedding-flash
http://player.longtailvideo.com/player.swf
You can also consider to recode the file to ogg to allow Firefox to play the file natively.
* https://developer.mozilla.org/En/Using_audio_and_video_in_Firefox
* https://developer.mozilla.org/En/Media_formats_supported_by_the_audio_and_video_elements
* http://en.wikipedia.org/wiki/Use_of_Ogg_formats_in_HTML5 -
Eroor while launching businessr rule - (Essbase Error(1042017))
Hi,
I get this error message while try to launch my BR,which is due to the usage of too many functions in the ELSEIF part.
Error:
Detail:Cannot calculate. Essbase Error(1042017): Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again.
BR:
FIX("Existing")
FTE(
IF("Scenario" == "Budget" AND ((FTE<>0) OR (FTE<>#MISSING)))
"FTE"=FTE->&Bud_Start_Mth;
"TBH"->&Bud_Start_Mth = "Headcount"->&Bud_Start_Mth - "Existing"->&Bud_Start_Mth;
"TBH" = "Headcount" - "Existing";
ELSEIF(@ISMBR(@LIST(@REMOVE(@LDESCENDANTS(@LIST(@REMOVE(@ISIBLINGS(@PARENT(&LE_Month)),(@LSIBLINGS(@PARENT(&LE_Month)))))),@LSIBLINGS(&LE_Month)))) AND ((FTE<>0) OR (FTE<>#MISSING)))
"FTE"=FTE->&LE_Month;
"TBH"->&LE_Month = "Headcount"->&LE_Month - "Existing"->&LE_Month;
"TBH" = "Headcount" - "Existing";
ENDIF;)
ENDFIX
ELSEIF(@ISMBR(@LIST(@REMOVE(@LDESCENDANTS(@LIST(@REMOVE(@ISIBLINGS(@PARENT(&LE_Month)),(@LSIBLINGS(@PARENT(&LE_Month)))))),@LSIBLINGS(&LE_Month)))) AND ((FTE<>0) OR (FTE<>#MISSING)))
+"FTE"=FTE->&LE_Month;+
+"TBH"->&LE_Month = "Headcount"->&LE_Month - "Existing"->&LE_Month;+
+"TBH" = "Headcount" - "Existing";+
Here i try to calculate FTE for the subsquent months based on my &LE_Month.
For Eg: I have,
Q2 oct,nov,dec
Q3 jan,feb,mar
Q4 apr,may,jun
And my &LE_Month as say, "feb"
based on the above elseif,i wanna calculate FTE only for the months right to "feb"(&LE_Month)i.e.for mar,apr,may and jun
Is there any other suggestions to work it out..?
Any help is appreciable..
Regards,
RevHi,
Why you want to complicate the BR?
you can simply use @ismbr(&LE_Month:JUN) or whatever based on your months ordered in the dimension.
- Krish -
Vision builder AI engine takes so long to launch .
Hi all i am using Vision builder for my application .
(labview as api)
here i am using multiple Vision builder files .
if i do program like
(lauch - inspect ) together i takes (3000ms)
(launch ) intiall then inspect only means (300 ms)
for singple .vbai file its okay ..
in case of multiple .vbai files. the AI engine launch takes many time .(due to multiple Ai engines).
Help me to use of multiple files at a time . effientlyI remember when AI used to take forever to launch. Now I run in 64-bit, and since AI updates it is reasonably faster at launch. Are you running your iMac in 64-bit? or 32?
Maybe you are looking for
-
Calculating local currency based on document date in goods receipt
We have a requirement in Poland that the local currency PLN should be calculated based on the document date when doing goods receipt, and not standard SAP posting date. I can only find note 619330 according to this requirement, but this note requires
-
Passing parameters to Transactions from Web dynpro Application through ITS
Hi, i need to call a transaction from Web dynpro through ITS. On action from web dynpro application, i am concatenating the respective parameters mentioned below along with URL. The problem is one parameter(VARIANT) is being passed to the t-code CAT3
-
Test System Engineer / LabVIEW Developer
As a member of the Nexjen Systems team, the Test System Engineer / LabVIEW Developer performs engineering design, software development and hardware specification for custom test & measurement systems. Nexjen Systems offers a challenging environment w
-
PS-SD integration is it possible to create a Whole WBS Structure
Hello to everybody, I'm involved in project in which there is a strict integration SD-PS. Each sales order item should be assigned to a specific WBS element. I found SD/PS assignment indicator, in control data of standard project definition. i custom
-
Iphoto 8.1.2 start with a wrong request to import some pictures that don't exist
Hello I've got a problem when start iphoto 8.1.2: the monitor displays a request about import but don't finds the pictures