3G not working in UT Austin campus

The wirelss works, text, phone call works
BUT the 3G keeps not working...in ut austin campuses.

Hi hazard17!
As your service provider, we understand your need to have a data connection. After all, this is the reason you have a data device, right? Are you still having this issue? What model Android do you have? What city/state are you in (zip code, too)? Is this an ongoing issue or was it something that you had an issue with at the time of your post? Please let me know, so I can make sure you're OK!
Thanks in advance,
Christina B
VZW Support
Follow us on Twitter @VZWSupport

Similar Messages

The Help Link from the Application Pages Does not Work for Peoplesoft Campus Solutions 9.0

Hi everyone.
I have a problem, I have been trying to set up the Help Link from the Application Pages for Peoplesoft Campus Solutions 9.0 according to the instructions given in the Document: http://docs.oracle.com/cd/E17566_01/epm91pbr0/eng/psbooks/EnablingtheHelpLinkfromApplicationPages.pdf , (referenced in the Doc ID 1289101.1, E-PB: How to Set Up the Context Sensitive Help with Hosted PeopleBooks using Universal Linking).
I follow the instructions of that document carefully:
I go to: PeopleTools -> Web Profile -> Web Profile Configuration
    2. Then I choose the Web Profile: "Development".
    3. Then Change the value for the Help URL field by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5 , the ctx parameter selected is the one that correspond to the Campus Solutions (hrcs90r5) according to the Product Line Code Table (ULinkID) especified in the mentioned document.
    4. Stop the Web Domain and Clear cache.
    5. Start the Web Domain again.
After setting up the Web Profile Configuration I test the help links, thas is why I click in the Help link in any Peoplesoft CS 9.0 Application Page (modify a person), but the next error message appears: "We're sorry, the topic you requested was not found.".
I tried many combinations with the ctx parameters URL but it does not work yet.
I did the same test, but this time using the Help URL field with a HRMS ctx parameter by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hcm92pbr5 , and It works fine !!!
According to the previous test you realize that It works with HRMS ctx parameter but not with Campus Solutions 9.0 ctx parameter, Does anybody know what else can I do ? Am I doing anything wrong or missing? or maybe the Oracle's ctx parameter for Campus Solutions URL It is broken simply.
Thanks for you help and feedback.

2799444 - The page you are testing with appears to be a Workforce Administration page. Is that correct?
The CS PeopleBooks would only work for CS pages, e.g.: try navigating to Main Menu > Campus Community > Personal Information > Add/Update a Person
Also, you can use multiple ctx parameters:
E.g.: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5&ctx=hcm92pbr5&ctx=pt852pbh2
This way the help would work for the HR related pages like Workforce Administration, Campus Solutions pages like Campus Community and also PeopleTools pages like Web Profile Configuration. Hope this clarifies your question. Thanks!

SAP Mobile app Stock photo not work for network location

Hi Experts
I found if we use network location path (e.g.
servername\pic folder\) in SAP Business One General Settings -> Path, Picture Folder, then if we logon SAP B1 Mobile app from iPad/iPhone, and try to open stock photo, we will get error:
Processing Failed
Internal server error: contact your system administrator
It looks like it only work for local path, e.g C:\pic
Even we put path as :
local pc name\pic folder, it is also not work.
Any idea about this?
Thanks
Tim

The first link is a temporary fix for a machine that only one or two people will use. This will not fix the Library Machines that some 3000 users can use at anytime. I can not pre-add all these users every time we image a machine. We also loan out laptops and I need these machine to wirelessly login dynamically to the domain. But I also need these machine to allow access if these machine are removed from our campus and the wireless access is not available.
Thank again for the help and I hope someone at Apple can fix this soon. I going to have a hard time telling the client that thay can not use the OS that came with they're machine.

AIR-LAP1242G-E-K9 do not work with AIR-CT5508-K9 while AIR-LAP1142N-E-K9 do

Hello,
we do have a site where we need to deploy AIR-LAP1142N-E-K9 and AIR-LAP1242G-E-K9 APs. We have two AIR-CT5508-K9 controllers with SW version                  6.0.188.0.
AIR-LAP1142N-E-K9s work okay, as expected, we do not have any problems with them.
However AIR-LAP1242G-E-K9s do not, there is a problem with establishing CAPWAP tunnel with the controller.The AP is seen on the controller for a while, with 0 time up-time, cannot change any settings on the AP via controller, and after a while it disapears from the controller, apears again and this repeats.
The APs and controllers are connected to the LAN campus.
Controllers via two 1G links configured as Etherchannel to WS-C6506-E VSS switch with s72033-ipservicesk9_wan-vz.122-33.SXI1.bin on it.
APs to WS-C3750G-48PS with c3750-ipbasek9-mz.122-50.SE2.bin on it. 3750 is connected to the C6505 via two 1G links configured as Etherchannel.
Below I copied the log I captured on 1242 and the controller. Highlighted ones are the ones which I think might bring a clue.
I performed some troubleshooting steps.
- As we have some other controllers available over WAN, I tested the 1242 AP with 2100, 4400 and also with the same model AIR-CT5508-K9 with SW version                  6.0.188.0 over WAN and this worked always okay.
- I wanted to be sure that I eliminate any kind of out of sequence packet issue, so I brought down all redundancy L2 links so that the L2 path from the AP to the controller was only through one leg links.
- I also brought the second controller down to eliminate potential issue with having two of them up.
- The AP gets its IP from DHCP configured on the C6506 switch, I am always able to ssh to AP, so the IP connectivity does not seem to be an issue.
- I have more 1242s, all behave in the same way. I also connected them to some other 3750 switches we have in the campus, always the same.
- As this seems to be maybe a kind of ssl issue, I tried to play with controller settings, like enabling Accept... options under Security/AP Policy,but this did not help.
- I also tried to reboot the controller, no improvement.
- The APs came from the factory, so in the beginning everything was factory default in them. They were always able to download the image from the controller in the very initial phase. I still do have some of them untouched, so I can perform any troubleshooting steps with the fresh one.
I can reproduce this, can also send debugging logs if needed.
Any idea on what could be wrong is highly appreciated.
Thank you.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
This Discussion has been converted into document:- https://supportforums.cisco.com/docs/DOC-23054
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
AIR-LAP1242G-E-K9 10.0.13.28 log
*Mar 1 00:00:05.922: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:07.536: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot1 1Radio 0
*Mar 1 00:00:07.672: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 304 messages)
*Mar 1 00:00:09.809: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:09.874: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(21a)JA2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 02-Nov-09 18:42 by prod_rel_team
*Mar 1 00:00:09.874: %SNMP-5-COLDSTART: SNMP agent on host wuen4028 is undergoing a cold start
*Mar 1 00:00:09.964: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:00:09.967: bsnInitRcbSlot: slot 1 has NO radio
*Mar 1 00:00:10.191: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:10.191: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:10.430: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:10.818: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar 1 00:00:11.212: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:18.315: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 10.0.13.28, mask 2 55.255.255.0, hostname wuen4028
*Mar 1 00:00:28.988: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:00:31.456: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:00:31.495: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:32.457: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:00:32.457: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
*Mar 1 00:00:38.810: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Mar 1 00:00:47.811: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Mar 1 00:00:56.812: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER
*Mar 1 00:01:07.815: %CAPWAP-3-ERRORLOG: Selected MWAR 'wuen4001'(index 0).
*Mar 1 00:01:07.815: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Feb 11 07:52:24.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.0.13.5 peer_port: 5246
*Feb 11 07:52:24.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Feb 11 07:52:25.441: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.0.13.5 peer_port: 5246
*Feb 11 07:52:25.443: %CAPWAP-5-SENDJOIN: sending Join Request to 10.0.13.5
*Feb 11 07:52:25.443: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Feb 11 07:52:25.445: %CAPWAP-3-ERRORLOG: Unencrypted non-discovery CAPWAP Control Message from 10.0.13.5
*Feb 11 07:52:25.445: %CAPWAP-3-ERRORLOG: Invalid AC Message Type 4.
*Feb 11 07:52:25.445: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Feb 11 07:52:25.445: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.0.13.5
*Feb 11 07:52:30.441: %CAPWAP-5-SENDJOIN: sending Join Request to 10.0.13.5
*Feb 11 07:52:30.442: %CAPWAP-3-ERRORLOG: Unencrypted non-discovery CAPWAP Control Message from 10.0.13.5
*Feb 11 07:52:30.443: %CAPWAP-3-ERRORLOG: Invalid AC Message Type 4.
*Feb 11 07:52:30.443: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Feb 11 07:52:30.443: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.0.13.5
*Feb 11 07:52:47.644: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Feb 11 07:53:23.999: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 10.0.13.5:5246
*Feb 11 07:53:24.000: %CAPWAP-3-ERRORLOG: Selected MWAR 'wuen4001'(index 0).
*Feb 11 07:53:24.000: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Feb 11 07:52:24.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.0.13.5 peer_port: 5246
*Feb 11 07:52:24.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Feb 11 07:52:24.001: %DTLS-5-PEER_DISCONNECT: Peer 10.0.13.5 has closed connection.
*Feb 11 07:52:24.001: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 10.0.13.5:5246
*Feb 11 07:52:24.002: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 3 combination.
*Feb 11 07:52:24.123: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is not established.
wuen4028#
AIR-CT5508-K9 10.0.13.5 log
*Feb 11 09:00:54.824: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to c
omplete DTLS handshake with peer 10.0.13.28
                                           *Feb 11 08:59:53.798: %DOT1X-3-MAX_EA
P_RETRIES: 1x_auth_pae.c:2862 Max EAP identity request retries (3) exceeded for
client 00:1f:3b:93:dd:4f
*Feb 11 08:59:51.197: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2862 Max EAP ident
ity request retries (3) exceeded for client 00:c0:a8:e1:b1:71
--More-- or (q)uit
*Feb 11 08:59:21.212: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:292 RRM LOG: Airewave Di
rector: Could not find valid channel lists for 802.11bg
*Feb 11 08:58:39.766: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to c
omplete DTLS handshake with peer 10.0.13.28
                                           *Feb 11 08:57:06.131: %RRM-3-RRM_LOGM
SG: rrmChanUtils.c:292 RRM LOG: Airewave Director: Could not find valid channel
lists for 802.11bg
*Feb 11 08:56:24.504: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to c
omplete DTLS handshake with peer 10.0.13.28
                                           *Feb 11 08:55:09.693: %DOT1X-3-MAX_EA
P_RETRIES: 1x_auth_pae.c:2862 Max EAP identity request retries (3) exceeded for
client 00:1f:3b:93:dd:4f
*Feb 11 08:54:51.040: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:292 RRM LOG: Airewave Di
rector: Could not find valid channel lists for 802.11bg
*Feb 11 08:53:56.493: %DOT1X-3-MAX_EAP_RETRANS: 1x_ptsm.c:426 Max EAP retransmis
sions exceeded for client 00:1f:3b:93:dd:4f
*Feb 11 08:53:34.497: %DTL-3-OSARP_DEL_FAILED: dtl_arp.c:1380 Unable to delete a
n ARP entry for 10.0.13.28 from the operating system. ioctl operation failed
*Feb 11 08:52:35.936: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:292 RRM LOG: Airewave Di
rector: Could not find valid channel lists for 802.11bg
*Feb 11 08:52:26.492: %DOT1X-3-MAX_EAP_RETRANS: 1x_ptsm.c:426 Max EAP retransmis
sions exceeded for client 00:1f:3b:93:dd:4f
*Feb 11 08:50:07.680: %DOT1X-3-MAX_EAP_RETRANS: 1x_ptsm.c:426 Max EAP retransmis
sions exceeded for client 00:1f:3b:93:e6:57
*Feb 11 08:48:37.458: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2862 Max EAP ident
ity request retries (3) exceeded for client 00:1f:3b:93:e6:57
*Feb 11 08:47:37.438: %DOT1X-3-MAX_EAP_RETRANS: 1x_ptsm.c:426 Max EAP retransmis
sions exceeded for client 00:1f:3b:93:e6:57
*Feb 11 08:47:34.438: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2862 Max EAP ident
ity request retries (3) exceeded for client 00:16:44:1d:0f:53
*Feb 11 08:46:32.422: %DOT1X-3-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:407 Max EAPOL-ke
y M3 retransmissions exceeded for client 00:16:44:1d:0f:53
*Feb 11 08:46:06.790: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2862 Max EAP ident
ity request retries (3) exceeded for client 00:1f:3b:95:61:bd
*Feb 11 08:46:06.789: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447 Authentication abor
ted for client 00:1f:3b:95:61:bd
*Feb 11 08:46:06.210: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2862 Max EAP ident
ity request retries (3) exceeded for client 00:1f:3b:93:e6:57
*Feb 11 08:45:34.304: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2862 Max EAP ident
ity request retries (3) exceeded for client 00:1f:3b:95:61:bd
*Feb 11 08:45:34.303: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447 Authentication abor
ted for client 00:1f:3b:95:61:bd
*Feb 11 08:45:01.298: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:292 RRM LOG: Airewave Di
rector: Could not find valid channel lists for 802.11bg
*Feb 11 08:44:38.076: %SIM-3-PORT_UP: sim.c:9547 Physical port 2 is up!.
*Feb 11 08:44:38.037: %SIM-3-PORT_UP: sim.c:9547 Physical port 1 is up!.
--More-- or (q)uit
*Feb 11 08:44:38.009: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'cliWebInitParms.cfg'
*Feb 11 08:44:37.980: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'rrcEngineInitParms.cfg'
*Feb 11 08:44:37.980: %CNFGR-3-INV_COMP_ID: cnfgr.c:2105 Invalid Component Id :
Unrecognized (81) in cfgConfiguratorInit.
*Feb 11 08:44:37.928: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'rfidInitParms.cfg'
*Feb 11 08:44:37.915: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'dhcpParms.cfg'
*Feb 11 08:44:37.903: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'bcastInitParms.cfg'
*Feb 11 08:44:37.834: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'rrmInitParms.cfg'
*Feb 11 08:44:27.331: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'apfInitParms.cfg'
*Feb 11 08:44:27.226: %MM-3-MEMBER_ADD_FAILED: mm_dir.c:903 Could not add Mobili
ty Member. Reason: IP already assigned, Member-Count:1,MAC: 00:00:00:00:00:00, I
P: 0.0.0.0
*Feb 11 08:44:27.023: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'mmInitParms.cfg'
*Feb 11 08:44:27.013: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'aaaapiInitParms.cfg'
*Feb 11 08:44:27.011: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'pemInitParms.cfg'
*Feb 11 08:44:26.898: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'dot1xInitParms.cfg'
*Feb 11 08:44:26.868: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'capwapInitParms.cfg'
*Feb 11 08:44:26.718: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'spamInitParms.cfg'
*Feb 11 08:44:25.650: %SSHPM-3-FREAD_FAILED: sshpmlscscep.c:1395 Error reading f
ile /mnt/application/lscca_pem.crt
*Feb 11 08:44:06.435: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'sshpmInitParms.cfg'

Thanks for such quick response and suggestions.
Yes, I seem not to to be 100% perfect as for the list of troubleshooting steps I took.
I had already tried the two commands you mentioned. I tried again, this time with some other 1242, but these do not help.
Yes, I was already thinking that this could be in theory a licensing issue. The controller is bougth with 25 licenses.
In the beginnign I had one 1142 on it and tried to enable 1242s which did not work. Now I have five 1142s on it, as this worked okay, I guess it could not be a licensing issue.
I think that I can see in the log files that the machines communicate to each other, L2 or L3 paths seem to be working okay. I forgot to mention that I am using option 43 on the DHCP server, so the AP clearly finds its way to the controller. What's more both APs and the controllers are in the same VLAN, so they are in the same broadcast domain.
Below is sho ver from the AP. The AP seems to have Certificate type - manufacture installed, so I guess there should not be a problem with the certificate, especially knowing that the AP works with other controllers over WAN.
My guess these messages seen on AP especially "Invalid event 38 & state 3 combination" might tell us what's wrong.
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
*Feb 11 07:52:24.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Feb 11 07:52:24.001: %DTLS-5-PEER_DISCONNECT: Peer 10.0.13.5 has closed connection.
*Feb 11 07:52:24.001: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 10.0.13.5:5246
*Feb 11 07:52:24.002: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 3 combination.
*Feb 11 07:52:24.123: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is not established.
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(21a)JA2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 02-Nov-09 18:42 by prod_rel_team
ROM: Bootstrap program is C1240 boot loader
BOOTLDR: C1240 Boot Loader (C1240-BOOT-M) Version 12.4(13d)JA, RELEASE SOFTWARE (fc2)
AP9caf.ca00.1c78 uptime is 17 minutes
System returned to ROM by power-on
System image file is "flash:/c1240-k9w8-mx.124-21a.JA2/c1240-k9w8-mx.124-21a.JA2"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-LAP1242G-E-K9    (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ135082GH
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 6.0.188.0
1 FastEthernet interface
1 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 9C:AF:CA:00:1C:78
Part Number                          : 73-11479-01
PCA Assembly Number                  : 800-30493-01
PCA Revision Number                  : A0
PCB Serial Number                    : FOC13484GYY
Top Assembly Part Number             : 800-29589-03
Top Assembly Serial Number           : FCZ135082GH
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1242G-E-K9
Configuration register is 0xF
AP9caf.ca00.1c78#

All the traffic go through IPsec tunnel(site to site ) ,but something seems not working correctly

Hi, all,
I have seen a good post in google.com about how to make all the client's traffic though IPsec tunnel then out to the Internet from the Main site,now I attach this configuration and application for discussion, and what the problem is that I am still confused with the configuration on Main site , I hope anyone who can tell me more detail and how to accomplish it. Any answer will be appreciated , thank you !
Quote :
Question ? :
Mine is a very simple configuration. I have 2 sites linked via an IPsec tunnel. Dallas is my Main HQ R1 and Austin R2 is my remote office. I want all traffic from Austin to route thru the tunnel up to Dallas, then out to the Internet.
Dallas (Main) Lan Net is: 10.10.200.0/24
Austin (Remote) LAN Net is: 10.20.2.0/24
The Dallas (Main) site has a VPN config of:
Local Net: 0.0.0.0/0
Remote Net: 10.20.2.0/24
The Austin (Remote) site has a VPN config of:
10.20.2.0/24
Remote Net: 0.0.0.0/0
The tunnel gets established just fine. From the Austin LAN clients, I can ping the router at the main site (10.10.200.1). This is how I know the tunnel is created, but I cannot ping anything beyond the router from the Austin LAN, e.g. 8.8.8.8.
I'm sure it's something simple I failed to configure. Anyone have any pointers or hints?
Answer:
Thanks to Jimp from the other thread, I was able to see why it was not working. To fix, I had to change the Outbound NAT on the main side to Manual. Then I created a new Outbound NAT rule that included the subnet from the Austin network (10.20.2.0). Basically, I just created a copy of the default rule and changed the Source network.
Once I made this change, Voila! Traffic from the remote side started heading out to the Internet. Now all traffic flows thru the Main site. It makes perfect sense why I needed to make this change, it just took a slap in the head from Jimp to point me in the right direction.
My question ?
The answer said "To fix, I had to change the Outbound NAT on the main side to Manual. Then I created a new Outbound NAT rule that included the subnet from the Austin network (10.20.2.0). Basically, I just created a copy of the default rule and changed the Source network." what this mean and
how to do it , could anybody give me the specific configuration ? thanks a lot.

Thank you for Jouni's reply, following is the configuration on Cisco 2800 router ,no firewall enable, :
crypto isakmp policy 100
encr aes 256
authentication pre-share
group 2
crypto isakmp key x.x.x address 0.0.0.0 0.0.0.0
crypto isakmp keepalive 60
crypto ipsec transform-set IPsectrans esp-3des esp-md5-hmac
crypto dynamic-map IPsecdyn 100
set transform-set IPsectrans
match address 102
crypto map IPsecmap 100 ipsec-isakmp dynamic IPsecdyn
interface Loopback1
ip address 10.10.200.1 255.255.255.0
interface FastEthernet0/0
ip address 113.113.1.1 255.255.255.128
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map IPsecmap
interface FastEthernet0/1
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
ip route 0.0.0.0 0.0.0.0 113.113.1.2
ip http server
no ip http secure-server
ip nat inside source list 100 interface FastEthernet0/0 overload
access-list 100 permit ip 192.168.1.0 0.0.0.255 any
access-list 102 permit ip any 10.20.2.0 0.0.0.255

AMD Radeon HD 6470M Not working-on Windows 8.1 Enterprise 64-bit -"Hp Pavilion g6 series "

I am now using Windows 8.1 Enterprise 64-bit .the display drivers are not working good. i cant use properly Adobe Photoshop(CC , CS5..etc).
All the "Hp Pavilion g6 series " [Pavilion g6-1201tx]Has the problem. Display Driver .-AMD Radeon HD 6470M
i download lates vertion from here :-
http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx
But after install i got error message on Device manager.
Error Message:- "Windows has stopped this device because it has reported problems. (Code 43)"
my laptop Specification here:-
http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03061225&prodSeriesId...
Any suggestions?

Install the newest Windows 8 (64-bit) driver for your notebook only from the HP web support download section.
uninstall the drivers for both adapters and the Catalyst Control Center by running the softpaq and choosing uninstall all. Once you have done that run the installer again and (select install all) install the Catalyst Control Center and the drivers.
The switchable graphics capability makes your notebook require the drivers from HP to achieve the switchable graphics capability.
Don't forget to share your results with the forum community.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

My iphone 5 the volume bottom does not work how to replace it in apple sotre

My iphone 5 the volume bottom does not work how to replace it in apple sotre
i read sb said they only replace the iphone by pay more 210 quid is this ture ?

Hi Austin XQ,
Thanks for visiting Apple Support Communities.
Based on the information you have provided, it sounds like your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Best,
Jeremy

Win 2003 Sevver Command Prompt not working

Hi,
It seems somehow the command prompt are not working on my server and hence one of my software installation is failing on the server.
it seems the CLI commands work fine when the Command prompt is executed directly from the /system32 dir. But when we use it from Start>run>cmd, the commands don't respond.
For Example:
C:\>ping
'ping' is not recognized as an internal or external command,
operable program or batch file.
C:\>nslookup
'nslookup' is not recognized as an internal or external command,
operable program or batch file.
And when I execute it from the /system32 :
C:\WINDOWS\system32>ping
Usage: ping [-t] [-a] [-n count] [-l size] [-f] [-i TTL] [-v TOS]
   [-r count] [-s count] [[-j host-list] | [-k host-list]]
   [-w timeout] [-R] [-S srcaddr] [-4] [-6] target_name
Options:
   -t Ping the specified host until stopped.
   To see statistics and continue - type Control-Break;
   To stop - type Control-C.
   -a Resolve addresses to hostnames.
   -n count Number of echo requests to send.
   -l size Send buffer size.
   -f Set Don't Fragment flag in packet (IPv4-only).
   -i TTL Time To Live.
   -v TOS Type Of Service (IPv4-only).
   -r count Record route for count hops (IPv4-only).
   -s count Timestamp for count hops (IPv4-only).
   -j host-list Loose source route along host-list (IPv4-only).
   -k host-list Strict source route along host-list (IPv4-only).
   -w timeout Timeout in milliseconds to wait for each reply.
   -R Trace round-trip path (IPv6-only).
   -S srcaddr Source address to use (IPv6-only).
   -4 Force using IPv4.
   -6 Force using IPv6.
C:\WINDOWS\system32>nslookup
Default Server: dns-blr2.cisco.com
Address: 72.163.128.140
Please check and suggest!

Hi Aryanadonis ,
Thanks for posting here
According what you mentioned, I thought system can’t located command programs path when you perform this command .
Seems that you can perform these command with assign path, what I thought is this issue occurred because wrong environment variable setting.
I noticed that you have posted the Environment Variable result here, I checked and highlight wrong values that could cause this issue. please correct it and try perform
command again.
C:\WINDOWS;
C:\WINDOWS\system32;
C:\WINDOWS\system32\\wbem;
C:\PROGRA~1\CSCOpx\objects\smarts\lib;
C:\PROGRA~1\CSCOpx\objects\smarts\bin;
C:\PROGRA~1\CSCOpx\campus\bin;
C:\PROGRA~1\CSCOpx\MDC\tomcat\bin;
C:\PROGRA~1\CSCOpx\MDC\Apache;
C:\PROGRA~1\CSCOpx\MDC\Apache\bin;
C:\PROGRA~1\CSCOpx\MDC\jre\bin;
C:\PROGRA~1\CSCOpx\MDC\bin;
C:\PROGRA~1\CSCOpx\lib\jre\bin\server;
C:\PROGRA~1\CSCOpx\objects\db\win32;
C:\PROGRA~1\CSCOpx\bin;
C:\WINDOWS\system32\\wbems\smarts\binPROGRA~1\CSCOpx\MDC\ApacheOGRA~1\CSCOpx\lib\jre\bin\serverCOpx\lib\jrebin\serveremRoot%\System32\Wbem;
C:\Other Programs\net snmp\bin
This article below introduce how to modify environment variables in windows XP , but you may also reference to it and modify environment variable on you windows 2003:
How To Manage Environment Variables in Windows XP
http://support.microsoft.com/kb/310519
Thanks.
Tiger Li
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Topology map not working in LMS 3.1

Hi,
I recently did a clean installation of LMS 3.1. The topology services is not working returning an error named "Failed to initialize: Java.lang.NumberFormatException: null"in the pop up window.
Any help would be appreciated
with thanks
sathappan

I can't unse this version of java plug-ins because in a screen of Campus
Manager said you need to install java 1.5. I deinstalled all plug-ins of Java of my notebook an then install only plug-ins that LMS 3.1 have jre-1_5_0_15-windows-i586-p_withvbj.exe
Only with this plug-ins, Topology map is working now.
Thanks.

Spry drop down menu not working after page created from template

Hi all.
I created a template and the drop down Spry menu is working fine on local testing on my browser as follows:
I then created a New Page from this above Template. I did no alteration to this new page and just saved it as index.html but when previewing it in the browser, the Spry drop down menu is not working and the page displays as follows:
Here is my site map:
Any help to show where I am going wrong would be much appreciated.
Thanks.

Dear Nancy
Very grateful for your reply.
On Design View and Preview in browsers the index.dwt page spry works fine.
When I create a child page from this template page, the child page looks fine in design view but does the spry fails to preview in browsers (the spry just shows as words and not drop down menus).
Here is the code:


!/cooltext454549176.png|height=170|width=631|src=/cooltext454549176.png!
!/logosmall.jpg|height=58|hspace=0|width=150|src=/logosmall.jpg|vspace=0!
Disclaimer:
Studentshub is a platform for listing services as advertised/promoted by the Companies and individuals concerned. Studentshub does not endorse any of the contents on this site. Studentshub accepts no responsibility for any arrangements, purchase, contracts, agreements, refunds, failure to deliver services etc between individuals, landlords, clubs, organisations, companies etc. This does not affect your statutory rights (2009)
*Contact !/bluebutton.gif|height=10|alt=Blue button|width=10|src=/bluebutton.gif!
Sitemap !/bluebutton.gif|height=10|alt=Blue button|width=10|src=/bluebutton.gif!*
© www.studentshub.co.uk *
!/bluebutton.gif|height=10|alt=Blue button|width=10|src=/bluebutton.gif!
!/cooltext454549388.png|height=138|width=700|src=/cooltext454549388.png!
[LIVE | #]
[CAMPUS | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[HOUSE SHARE | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[RENT | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[BUY | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[WORK | #]
[EMPLOYMENT AGENCIES | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[PART TIME | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[VOLUNTEERING | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[WORK ABROAD | #]
[TRAVEL | #]
[BUS | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[TRAIN | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[COACH | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[FLIGHTS | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[CYCLE | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[FUN | #]
[NIGHTS OUT | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[DAYS OUT | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[GROUP OUTINGS | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[HOLIDAYS | #]
[UK | #]
[ABROAD | #]
[SHOPPING | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[BOOKS | #]
[BOOKSHOPS | #]
[USED BOOKS | #]
[HEALTH | #]
[NHS DIRECT | #]
[HOSPITALS | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[WALK IN CLINICS | #]
[DERBYSHIRE | #]
[NOTTINGHASHIRE | #]
[LEICESTERSHIRE | #]
[GUM CLINICS | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[HOME | #]

</script>
</body>
</html

Key(s) sticking or not working

I just got my replacement MacBook, it is a week 32, and running well for the most part. However, my 'p' key sticks (it pops up just a tad slower, but when I hit it pretty hard it will actually stay down).
Also, I don't know if I'm just hallucinating or not pressing on the keys as hard as I usually do, but it seems that pretty often when I am typing keys will not work and I have to go back and press them again.
I don't have an actual retail Apple store anywhere in the area, just an Apple tech shop inside of my college campus' bookstore. Is this a legit problem? Has anyone else had to get this fixed? Could they do it there?
Edit: I have definitely noticed more. About one out of every 10 or 15 keys I press is not recognized at first and I have to press it again. It happened about three times just during this edit. I don't have to actually mail this in to get repaired, do I?

i think you should send it in to get repaired, but if that apple tech place is certified by apple, just do it there...MAKE SURE IT IS CERTIFIED
 Mac Mini Intel Core Solo- 1 GB RAM- Superdrive- Production week 18 Mac OS X (10.4.7)

Itunes podcast image not working

I am using feedburner to generate a podcast feed for a website my agency worked on. It works fine, we can post things and they show up as podcasts if there is an audio file attached, and the feed shows up fine on feedburner. We used smartfeed on feedburner to generate the extra tags needed for an itunes podcast, including the podcast image, but it's not working. We made sure to input a 1400x1400 image as the feed image, and every time we have changed the image we have made sure to make the filename different so itunes recognizes that there is a differnet image. It has been almost a week since we put in that image and it still is not showing up.
I don't know if it just takes longer, or if there is something wrong, but we have been trying to get an image working for a few weeks now.
The link to the podcast is here
https://itunes.apple.com/us/podcast/uncommon-austin-podcast-2013/id468093685?mt= 2
I can link to the feedburner feed as well if needed. But we would just like to know of a solution to our problem.
Thanks
Josh

The image which appears on the Store page is referenced in the feed: but the image which appears when you subscribe (either manually or from the Store page) is not - it is embedded in each episode's media file. This page explains the situation and what to do about it:
http://homepage.mac.com/rfwilmut/notes/faq.html#coverart

A few keys on the Integrated key board do not work help

After much trial and error I have found that there is no way for me to fix the fact that my qwertyuio keys on the integrated keyboard do not work....I have not taken my MBP to my local store yet because I have many projects and papers due this week and kinda need it. Luckily i have a bluetooth keyboard that works fine but i do not feel like bringing it everywhere with me in order to work on these papers and projects...where I live in not exactly the quietest place and I would like to go to the library on campus...does not work with those keys not working considering i can type four of the five vowels in the english language

Hello Hickster and welcome the Apple Support Forums,
It definitely sounds like a hardware problem so these things probably won't work but you can try:
Reset PRAM (hold the command-option-p-r during boot up after the chime)
open a new account and see if the problem persists.
go to keyboard preferences and make sure all the keyboard modifier keys are set to default
start the machine in Safe mode by holding the Shift key while it starts.
You could try to reset the SMC by turning off the machine and removing the battery and power cord, holding the power button for 5 secs then putting it all back together.
Like I said, these are unlikely to work but are pretty safe to do. That being said I highly recommend you make a complete cloned backup to another drive before you start messing around with key combinations etc. Be sure to make a back up before you take it in. Specifically back up all the papers you're working on to a thumb drive or some easily accessible media in case there is a problem.
You could then work on your papers with the Library machines (export your files to windows friendly on the thumb drive) while you wait for your MBP to get fixed.
If you still have applecare that is the way to go but if not then you could try to follow the iFixit guides for removing the keyboard and re-installing it to see if it just needed to be reseated. If you have applecare you will void it by doing that so make sure you don't void your warrantee.
Hope you get things figured out.
John

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

Kowhai wrote:
Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

U330 Ethernet not working, wireless works fine

I have an Ideapad U330 that will not get online using ethernet in windows. Before you ask, no it isnt my router. When I use an Ubuntu bootable disk, the ethernet works fine and I can surf the web without issue. I reformatted and installed windows 7 x86 (It had windows XP previously and the ethernet didnt work there either), installed all the drivers, and updated the BIOS, the ethernet still does not work while the wireless works fine. I thought this was a hardware issue until the ethernet worked with no issue in Ubuntu.
Solved!
Go to Solution.

Alright well I booted it up in Ubuntu again to get the details, got an IP of 192.168.1.142 and DNS of 192.168.1.1. When connecting through Windows, I get an IP of 192.168.1.198 and DNS of 192.168.1.1. The only difference that it pulled up that was different from Windows' ipconfig /all is that it pulled a slightly different IP.
But, lo and behold, manually putting in the IP pulled from Ubuntu worked. But each time I try to go back to automatic IP in Windows it keeps delegating it to 192.168.1.198. Is there any reason why it keeps doing this? I would imagine that the router could have a setting having that out of an accepted range, but since that's the only IP it'll obtain otherwise, I'm wondering why that is.
I guess all there is left to ask is whether there's a way to keep the IP and DNS as automatic settings rather than manual. This is a college campus and I'd like to make sure that it wouldn't interfere with other computers or locations, including off-campus locations. Any thoughts?

3G not working in UT Austin campus

Similar Messages

Maybe you are looking for