3G option missing in fn-f5 menu

Hello! I have S10-3, Window 7 Starter. Today the fn-f5 menu does not show the 3G option, yesterday everything was okay. I tried the following: * plugged the sim card in and out * restarted with and without sim card * toggled the wireless switch on and off * restored an earlier point (where I knew everything was okay) with Windows Restore to no avail. Yesterday everything worked, today not. How do I get the 3G option into fn-f5 menu? Thanks!

i don't think you will be able to return it but you can ship it back to service. as you mentioned, could be hardware issue or loose cable/adapter.

Similar Messages

  • Recovery option missing from ThinkVantage boot menu

    On my x220 I installed an mSATA hard drive in addition to the built-in disk. I re-installed Windows 7 and all of the Lenovo utilities onto the mSATA drive, then deleted the 100mb system and primary Windows partition from the spinning disk. I did not touch the RnR partition.
    Now when I press the blue ThinkVantage button during start-up, recovery is not one of my choices. I cannot get into the recovery partition. What steps are necessary to re-enable this feature?
    Thank you. Screenshots below show the in-tact recovery partition, and my menu of choices when I press the ThinkVantage button
    Link to picture
    Link to picture
    Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

    Did you install the mSATA using recovery discs from Lenovo or make a clean install?
    As the F11 is the only option which is missing, and the only option which is not a direct BIOS command and must be in the Master Boot Record, my guess is that your BIOS / MBR don't know that it should show the message or even know that the recovery partition exists.
    How you sort that all out is unknown to me, not one of my skills. Maybe install the mSATA from recovery discs which would then also locate the recovery partition also on the mSATA or somehow edit the MBR which I definitely don't know how to do???
    edit; grammar
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • TV option missing from FN-F5 menu on Satellite M30

    I just bought an S-video cable and a sound cable to enable me to connect to my TV and watch films from my laptop. After connecting it to both sides I tried to connect to the TV output using the fn f5 key.
    However, at this point I did not know what button to press on my TV ?(ir the s-video option). After figuring this out I tried again on my laptop only to find that the only option available on the fn f5 menu is lcd/crt. All the others are now missing. I went through the display settings way but this does not work either, and only turns the screen black for a few seconds before turning back on.
    Can anyone suggest a way to get all the other options back on the fn f5 menu or if there is an easier way to view my desktop and watch films from my laptop to my TV. Any suggestions would be greatly appreciated.
    Thank u.

    hi
    i also tried setiing it up using the display properties way, but it also does not work. Also in my display settings i do not have an 'NVidia tab' but i have a 'GeForce FX Go5200 32M/64M' Tab instead.
    But when i click 'device settings' from a little drop out (to the side) box and then tv, it brings up the warning box - 'windows will now apply your new device settings...' so i click ok to this and the screen turns black for about 2 seconds and turns back on. from which i get another warning box 'your desktop has now been reconfigured... and a little timer asking if i want to continue' but nothing happens after i press yes.
    on my tv i see part of my desktop, not in proper colour and very zoomed in, very unclear, with no icons or pointer.

  • Laserjet P3005dn network configuration options missing from I/O menu

    I acquired a Laserjet P3005dn that should be networkable, and has an Ethernet port in the back, but when turned on, there is no network configuration in the menu.  From the menu, I choose Configure Device, I/O.  The only option is "I/O Timeout".  The "Embedded Jetdirect" option is not there. 
    I tried to do a cold reset, but it made no difference.  Can this be fixed?

    I see that this is a commercial LaserJet printer.  It would be best to post in the commercial LaserJet forums.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Why are options missing from the Insert Menu in DW CS6?

    I'm trying to learn how to use CS6 with a Classroom in a Book. Unfortunately when the book tells me to insert something using the Insert Menu I often cannot find the options. This is true for Image Placeholder, for server-side includes, and also true for insert tabular data. Maybe I am just too stupid to find these options, but using Windows 7 x64 I cannot seem to find them. Maybe somebody can point out these menu items to me?

  • Finder issue: Compress option missing from right-click menu and greyed out in File menu

    How can this be, and - more importantly - what can I do to resolve this issue? Thanks.

    You mean this ThisService?  Never heard of it before.
    Why don't you create services using Automator (in /Applications)?  That's one of the things it is designed to do.  It has no problem with making sure they are properly created and installed in ~/Library/Services so that the finder can see them there under the conditions desgnated when you create them.  You don't even have to log out and back in.
    Note, if you like using applescript you can use applescript in automator too.

  • None of the 3D options are active in my menu.  What am I missing?

    I have the up-to-date Creative Cloud version of Photoshop, but none of the 3D options are active in the menu.  What am I missing?
    I tried clicking the "Get More Content" but didn't find anything which would apply to the basic 3D functions in the menu.
    Thank you for any light you can shed on this.

    Common Photoshop Issues | Mylenium's Error Code Database
    Mylenium

  • Execute option missing from JSP drop down menu

    I'm going through a Java Web Development class and trying to produce a small web app through Sun Java Studio Enterprise 7 2004Q4. I have two servlets, a couple of classes and two JSPs. At seemingly random times the "Execute" and "Execute (force reload)" options from the drop down menu you get when you right click a JSP fails to show up. It isn't grayed out, it just isn't there. Most of the time these options are there. And they can be there one time and then for the same project, same set of JSPs everything, they just disappear.
    Can anyone tell me what dumb thing I'm doing to cause this?
    And can anyone tell me how to fix it once I've done it?
    Thanks
    DR Crowley

    First of all thank you for all the time you are spending on this. Believe me I know how frustrating it can be to figure out what is happening when you can't reproduce the problem.
    On to your questions: I am running Windows XP Professional. I have checked and made sure that the extension is still .jsp and that it isn't changing. No I don't have the IDE set up to show extensions, however the icon beside the file is the jsp icon and when I go to Windows explorer (where I do have it set to show known extensions) it is a .jsp file and does not have the ever exasperating hidden extension that windows is infamous for. Sun Studio seems to recognize the file as a proper jsp (due to the icon).
    As to your further questions. I am executing it by right clicking on the jsp file itself. And the jsp file is in the documents folder not in the web/inf folder.
    At this point we are out of the class and it isn't nearly as important that I get an fix. We (our company) will probably not do jsp files and servlets thourgh Sun Java Studio Enterprsise. Instead we are looking at using Sun Java Studio Creater to do the view layer.
    Thanks for all your help and the time you took to try to figure this out.

  • PDF Optimizer option missing under Advanced menu

    Hello,
    I am using Acrobat 9.4.  I am aware that the PDF optimizer option is under the Advanced menu at the top.  However, that option seems to have disappeared.  Per the Adobe help file, I am looking in the right spot, but the option is gone.
    Is there a way to recover that option?  I have searched Google and found someone with the same problem on another forum, but no answers were posted.

    If you are running Std, then I do not think that option is available. You need to specify which version of Acrobat you are using, not just the level numer. I.E., Std, Pro, or Pro Extended.

  • Video menu option is missing from my iPod menu.

    I purchased a 60gb photo ipod approximately two weeks before the video release. When the video release software was available I downloaded it and the "video" option appeared on my iPod menu. A few weeks later I ordered my first videos from Itunes. After downloading the videos and updating my iPod, I found the video menu option was gone from my iPod. I have reset my ipod, deleted and installed new software, used the updater and have never been able to get the "video" menu option to show up again on my iPod. I can view the video in itunes but I can't get it onto my iPod. I just downloaded the latest iPod and iTunes software today and still no luck. Has anyone else had this problem? If so, were you able to fix it? I love the iPod and would like it a lot more if the video function worked for me. Thx for the help.
      Windows XP  
      Windows XP  

    Welcome to Apple Discussions!
    You need to have the 5G iPod with video for videos to transfer.
    Which iPod Do You Have?
    If you do not have a 5G iPod, you cannot view videos with the apple software, regardless of what you say the iPod used to show...
    btabz

  • Adobe Bridge shortcut button missing in PS CS6 menu bar, how to install as in PS CS5 [essentials]

    Adobe Bridge shortcut button missing in PS CS6 menu bar, how to install as in PS CS5 [essentials]

    Yes, Bridge shortcut has been removed from PS CS5. However, you can go to File->Browse in Bridge option to open the file in Br CS6.
    Similar query has been answered here.
    http://forums.adobe.com/message/4285441

  • Why is the "Send to iDVD" command missing from the share menu in iPhoto 9.4.3 when trying to send a slideshow to iDVD?

    How come the "Send to iDVD" command is missing from the share menu? In iPhoto I used to be able to send my slideshows to iDVD simply my clicking on the slideshow, selecting the "Share" menu at the top and going to "Send to iDVD". Now in iPhoto 9.4.3 that option is missing.
    Further i am also using iDVD 7.1.2 and running OSX version 10.8.3.
    Thanks!

    Export the slideshow via the Export button at the bottom of the slideshow window with Size = Medium or Large.
    Open iDVD, choose a theme and drag the exported movie file to the menu window being careful to avoid any drop zones.
    Follow this workflow to help ensure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • Acrobat 9 Std - Comments- 'Enable for Commenting And Analysis In Reader' option Missing

    Hi,
    We've purchased a copy of Adobe Acrobat 9 Standard, and need to enable comments in Reader for PDFs that we create in Acrobat.  The option to "Enable For Commenting And Analysis In Reader" seems to be missing from the "comments" menu, even though all the videos/tutorials insist it's there.
    I haven't found any threads about this yet, and searched google for the missing option + "missing" along with other things.  Nothing related came up.
    Any ideas on what we could try?  Or why this is happening?
    Thanks!

    I don't think Standard has this option. Acrobat Pro does.
    This page confirms it: http://www.adobe.com/products/acrobat/matrix.html

  • Aperture 3 save PDF to folder as JPEG option missing from PDF services?

    I have Aperture 3 downloaded from the App store in a MAC OSX 10.6.7 but the save PDF to folder as jPEG option is missing from the print menu? I do not have discs to re-install Aperture so can I add a workflow directly to the PDF services library and if so where can I get a copy of this workflow?

    Hi frank, thanks for the advice, I am very new to Apple and Aperture. I think I am looking at the second print menu, I am basically trying to add text to a phot and have followed this online guide
    http://photo.rwboyer.com/2010/02/07/aperture-book-tool-screen-cast-take-two/
    I can do everything except the last part which is save PDF to folder as JPEG. My version of aperture does not give me this option and I only have access to the following:
    Open PDF in preview
    Save as PDF
    Save as Post Script
    Mail PDF
    Save as PDF-X
    Save PDF to iPhoto
    Save PDF to web receipts folder
    Pictures
    Edit Menu
    There is no option to Save PDF to folder as JPEG and I cannot add this function from the Edit menu? Previous discussions suggest re-installing Aperture 3 but I downloaded this from the App store so do not have discs to reinstall?
    Thanks
    Mike

  • Recovery Partition and F11 recovery option missing

    Hi All,
    I have reset by T430 from the USB recovery(Windows 8) which i have created earlier. My recovery was successful, but the recovery partion was missing in the notebook harddisk and  F11 recovery option was missing in the startup menu after recovery.Please suggest me, how to restrore the recovery partion.

    Hi All,
    I have reset by T430 from the USB recovery(Windows 8) which i have created earlier. My recovery was successful, but the recovery partion was missing in the notebook harddisk and  F11 recovery option was missing in the startup menu after recovery.Please suggest me, how to restrore the recovery partion.

Maybe you are looking for

  • Need to know which exit to be used in me21

    Hi Guys, i want to know which user exit to be used in me21 so that if the PO has a delivery address that is outside the US; then the tax code should be EX and the tax jurisdiction code should be 7777777770. i had found lots of user exits in me21 but

  • Activity prices are not matching compare to previous year

    Dear Sap Guru's, Activity prices are not matching for the year 09 compare to 08.But standard cost estimation is correct.how it is possible.can you guide me how system calculates activity prices. Ex: My client having business in egypt.Last year they s

  • Document written in Word:Mac 2008 shows up as yellow font for Windows Word?

    When I write a document on Word for Mac and send it to someone using a PC when they open it in Word the font is all yellow. Any Advice on a fix?

  • Notes transfer to Ipod Touch

    I would like to transfer notes from a Palm to a new iPod Touch. I understand that one way to sync is to sync with Mac Mail notes. However, I can't find a way to transfer Palm notes to Mac Mail. Any thoughts?

  • Languages for iPod

    Does anybody know if there's a way to download non-native languages onto the iPod video? I'm trying to learn Vietnamese, and I'd like to practice reasing it, but it isn't one of the languages on the iPod. thanks!