3g restore problem. Error 21 code while connected to itunes.
Hey guys, I was having some problems with my 3g booting up so I connected it to itunes. It was in the middle of a restore when it was accidentally disconnected in the process. Now when I try to restore it again, I first for an error that said 1618. Now, the most recent error says error 21 unable to restore. What can I do to get the phone back up and running? Thank you for the help
Hi ...
Have you tried recovery mode > iOS: Unable to update or restore
"An update or restore did not complete and the device is no longer recognized in iTunes."
From that link ...
Similar Messages
-
HT1420 Receiving the error 310 while connecting to itunes stores
I am facing the problem to connecting to Itune store thru my new laptop.
Pls help it urgent.moehadi, Welcome to the discussion area!
This is typically caused by a firewall or Internet security software running on your PC. Please read the comments in "Error -3256 or -15000 when streaming to AirPort Express base stations using iTunes".
Also there is "iTunes 8: Unknown error -15000 when attempting to stream music to devices connected to AirPort Express with AirTunes". -
So I was using my iPod Touch 5th generation and the charger wouldnt charge it and it died then while it was in the process of tuening back on the apple logo dissapeered and it kept on turning on and off so i put it into DFU mode and it said to plug it into itunes to i did and it said i had to restore it to use it but when i tried to restore it it brought up ," Couldnt restore ipod, error code (9) " ..... and i have tried 3 different USB cables and two different computers and USB ports and i have no clue what to do so i would like help from anyone please that would be awesome!!!!
Thank you,
ZacZac henderson wrote:
...Couldnt restore ipod, error code (9) " ...
Try here > Configure security software -
When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?
FRANK M
What computer operating system is your Premiere Elements 9 running on? I will assume Windows 7, 8, or 8.1 64 bit for now.
As for the Help Menu/Update way for updating, are you doing that with antivirus and firewall(s) disabled? If not, please do so.
Do you have the 9.0.1 Update of the program installed? What version of Camera Raw do you have installed?
Premiere Elements 9 is an older program where you can still do manual installs for that one and only Update. And, Camera Raw for 9 is no longer being updated.
For the 9.0.1 Update
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4929
Camera Raw (last update possible for 9) is 6.5
Camera Raw-compatible Adobe applications
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.5 update
Please review and consider the above, and then let us know the outcome.
Thank you.
ATR -
TS1424 while connecting to itunes error occuring code 11556
while connecting to itunes error occuring code 11556 so plz send details to rectfy
Hello Negaz
When you uninstalled iTunes, did you uninstall it by using the article below or just uninstalled iTunes? The best practice is to remove not only iTunes, but also other associating software in the order that the first article give. If that does not work, then check out the second article for more troubleshooting options for connecting your iPhone to your computer.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G. -
This error message keeps popping up overtime I try to play an iTunes bought tv show from my mac book pro to my apple tv "An error occurred while connecting to the AirPlay device “Living Room Apple TV”. An unknown error occurred (406)."
Does anyone know what this means and how to fix it. Both devices are registered on the same apple id and password. This problem just started happening within the last week or so but prior to that everything was working as it should have. In fact since the launch of icloud things have been glitchy for me with purchasing and playing off the apple tv as well.
Can someone please help?'
ThanksUnfortunately Apple's error codes are very much a mystery (at least to me), try restarting the Apple TV, iPad and router. If that doesn't help look into whether you might be encountering interference on your network.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel. -
I can't get my itunes to connect to the remote speakers via airport express anymore - I did not change any settings - but did update iTunes to 10.2.2 and now things are not working and I get his message - "An error occurred while connecting to the remote speaker “Living Room”. The network connection failed."
Does anybody have a fix for this problem?
thanksSame problem for me. Ever since I upgraded to 10.6.3 and iTunes 9.1, about once per week I'll get the error message when trying to get iTunes/Airtunes to connect to my older Airport Express (running firmware 6.3) "An error occurred while connecting to the remote speaker <insert speaker name here>. The network connection failed." (No error codes are given.)
Airport Utility sees the offending Airport Express just fine (and there's a green light on said AE).
Curiously, a newer AE-n, elsewhere in the house (running firmware 7.4.2) does NOT exhibit this problem.
Simply restarting the offending AE does NOT clear the problem. Restarting the main router - a Time Capsule DOES clear the problem. Alternatively, toggling off the Airtunes functionality on the offending AE, restarting it, then toggling Airtunes back on, and finally restarting it DOES clear the problem (as an alternate to restarting the router). No matter how the problem is cleared, it returns within a week. It's frustrating that the problem cannot be recreated immediately.
Probably not relevant, but the computer on which I'm running iTunes (a Mac Mini) is connected to my TC via ethernet, not wirelessly.
I've tried the suggestion of disabling ipv6. No effect.
I fear the only solution will be to scrap my older Airport Express and replace it with a newer n-model. But before I resign myself to the $100 fix, any more ideas? -
Unfortunately, I keep getting the error "can not connect to iTunes. Code:0" I've tried rebooting, signing out of my apple ID, can someone please help or advise me on what to do? Many thanks, Ryan
hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo
-
Installed latest version of iTunes, now I cannot play music through my Airport Express. I'm seeing the message "An error occurred while connecting to the AirPlay device "living room". The network connection failed..."Living room" is what I named the is what I named The AirPlay function of the Aport Express. Thanks!
I have the same problem - did you solve it?
-
Hi ,
I acquired an Apple TV (Gen3) a couple of days ago.
The Apple TV seems to be connected properly to WIFI (Good signal)
I watched streaming videos on Youtube and film trailers – the speed is ok.
I followed the protocol but, still, I cannot connect Itunes to the Apple tv.
These are the error messages:
On the TV : apple tv could not connect to library
In Itunes: An error occurred while connecting to the AirPlay device “Apple TV”. An unknown error occurred (-15000).
Please note that Apple TV doesn’t appear in the list of devices in Itune’s preferences menu.
The Home Share is enabled on both devices and I connected with the Same Apple ID on each device.
Airplay is on.
Ref Apple TV :
Apple tv: Model MD199HC/A
Serial number DY******RHN
apple tv software : 5.3(6105)
Imac: OS X version 10.8.4
I already tried to :
Unplug/plug modem and router
Test connectivity
Disable the Firewall
Re-enable the firewall with Itunes in the list of ‘allowed’ devices
Re-set Apple TV (3 times) + Up to date
Re-start Apple TV and computer several time
Itunes is up to date
Could you please help?
Many Thanks
Sylvie
<Edited By Host>Hi all,
Thanks for your comments.
In my knowledge, there isn't any security software active on my computer.
After re-setting my routeur several times, I finally swapped it against an Airport Time Capsule.
It solved the problem, however, I would be interested to know if a (less expensive) solution exists.
Sylvie -
When trying to play itunes from my PC to my stereo connected to an Airport Express, I gen an error that says "An error occured while connecting to the Airplay device "Stereo" an unknown error occured (-15000)". This has happened before and for reasons unknown to me, the problem corrects itself, then it starts again/ Makes me wish I did not have my music on itunes.
moehadi, Welcome to the discussion area!
This is typically caused by a firewall or Internet security software running on your PC. Please read the comments in "Error -3256 or -15000 when streaming to AirPort Express base stations using iTunes".
Also there is "iTunes 8: Unknown error -15000 when attempting to stream music to devices connected to AirPort Express with AirTunes". -
Error occured while connecting to FTP Server...
Hi,
I am trying to use the file adapter to pick the file from FTP server however file adapter raised the following error:
Error occurred while connecting to the FTP server \"64.72.230.42:21\": java.net.ConnectException: Connection timed out: connect
I changed the timeout of the communication channel to 1200 but still getting this error after a minute.
The ftp server is working fine with my ftp client.
Could you please help me to fix this issue ?I got the following message
"Processing finished successfully" when the ftp folder did not have the required file.
Do you mean, the connection is ok when there is no file in the source directory.
Yes.
However as soon as i put the file start getting the same error message.
This could be then an authorization issue. Check if your source dir & file are having proper authorizations. Check with your BASIS guy.
I set the source directory to a folder name which does not exit on ftp server. now i am getting "The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /user038888888888888888/input: The system cannot find the path specified:"
So, do you think it is a problem of authorizations ? and if it is then how can i change it ? should i have to change the permissions of the folder on ftp server?
Thanks for your support. I really appreciate your help. I almost spend a whole day trying to fix this issue.
Regards,
Ehsaan. -
CRS 5 Backups fail with this error: Unknown error occured while connecting to the host
Dear All,
We have backup issue with UCCX 5.0(2)SR03_Build317, while trying to take backup giving following error "Unknown error occurred while connecting to the host".
I have found the solution in the Cisco and tried all the suggestion, still not working and same error observed. Due to backup issue we unable to do any changes on the CRS, when we try to create new agents, those agents are not reflecting in the CRS.
Also I have observed bellow error , when try to re-sync the JTAPI,
Error while handling the input request.
Top of Form
Config Changes are not allowed during 'Backup' operation, which was started by 'Scheduler' at 'Fri Jun 08 18:00:03 GMT+08:00 2012 '. Please try again after 'Backup' is complete.
Bottom of Form
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a00809a752c.shtml
Solution
Complete these steps in order to resolve this issue:
•1. Access the UCCX server and navigate to Start > Run, and type CET.
•2. When the warning message appears, click NO.
•3. Choose com.cisco.crs.cluster.config.ArchiveAdminConfig.
•4. On the right side, double-click the record ID.
•5. Click the com.cisco.crs.cluster.config.ArchiveAdminConfig tab, and clear the password under Backup Storage.
•6. Click Apply.
•7. Navigate to Appadmin > Tools > Backup and Restore.
•8. Under Backup Storage Location, type the new password, and click Update.
After you complete these steps, you can run the backup. If the backup fails, restart the server, and try the backup again. If the backup still fails, you can navigate to CET, clear all the fields, and then type the new information for the storage location.
Please help me with your suggestions.
Thanks & Regards,
Naveen .SPlease any one help me on this issue..
-
Ladies & gentlemen
I am using evaluation version of ImageUltra Builder 4.0 for Windows
XP. Both server and console have been installed on the same machine.
When I try to add a new repository, then after pressing the final
"Finish" button I get the message "An error occurred while
connecting to server: Check the server".
This message appears when the service IUServer runs.
I have not found any mention of this error neither in the Internet nor
in the documentation. Can any one suggest what could have been done wrong?
Thanks, Ilya DrukerI've had the same problem when trying to generate a database on an external storage unit. When I create a new repository there are two option:
1) Location: - This is the location where you want to store the files itself. This server does not have to have a database running on it
2) Server: - This is the name of the server that actually runs the DB2 database that keeps track of the repositories. This server does not have to be the same as the location where you store the files. This could also be the IP address of the server, not necessarily the name.
The documentation for this is somewhat confusing, but the above stuff works atleast. I have tried in never versions than 4.0 as well. -
An error occurred while connecting to the FTP server '127.0.0.1:14147'
HI Experts,
I have been tried Content Conversion by using the FTP. Under Adapter Monitoring --> Communication Channel monitoring i found this error:
An error occurred while connecting to the FTP server '127.0.0.1:14147'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 4 '. For details, contact your FTP server vendor.
Regards,
-Prabhakar.AHi
Pl mention the error correctly, whats the FTP error code? (something like this: 426, 521)
Could be due to 2 reasons:
1) insufficient privileges
2) wrong port
Srikanth Srinivasan
Edited by: Srikanth Srinivasan on Jun 20, 2010 2:19 PM
Maybe you are looking for
-
27" Imac Order date vs Manufactured date - unrecognized serial number
I received my 27" Imac I3 ordered February 24, 2011 shipped next day Fedex on February 25, 2011. The Apple weight sticker is dated 9/22/2010! There is another weight sticker under it which I can not read and I don't want to peel off the top one. The
-
I can't update iTunes software due to "Invalid Signature" issue
Everytime I try to update my iTunes software it says it has an "Invalid Signature" and won't be installed. For the latest big update I had to totally remove it and reinstall it from scratch. Now I still can't update it and of course I keep getting m
-
When I try to "Add" printers I get error message "The application Printer S
In the Set Up Printers Utiity when I click on "Add" I get an error message saying "The application Printer Setup Utility has unexpectedly quit", with a dialog box asking "would you like to submit a bug report to Apple?". Help? iMac G5 Mac OS X (10.
-
Perfmon report.html missing
Hello Guys, I've configured perfmon to run for an hour with the memory and cpu counters, Workflow, 1.The perfmon is scheduled to run from 10 to 11 GMT. 2.Once the run completes it calls a Scheduled Task "\MICROSOFT\WINDOWS\sendMail" and this script
-
Which T-code could show SAP Unix path and file??
Hi, I remembered there is one T-code could check SAP Unix file... Could kindly help remind.. Thanks