3G S just died after 4days.

Got my 32gig 3G S on the 19th, it was working fine this morning, and now it is dead.
Plug it into the charger and not even the battery icon comes up. I have pushed and held every button on the phone, any advice?
I bought it @ the AT&T store, pre-order, will they take it back?

I have to say, Apple has about the nicest customer service going. Not only did an Apple tech call me after my initial post, when I called back the 2nd time the tech spoke English, was super nice, and didn't talk to me like I was a idiot. Apple assigned me a case# and said I could send it in if I wanted to, I told them I'd hold for a few days.
The strange thing about this problem is that when the phone comes back on the battery level is always at 87%, no matter if the charge was 95% or 100% before the shut down.
I did a wipe of the phone and then a restore, it's also been removed from the hard case for the time being. So far, so good, hopefully it was just a glitch.
It does seem to use battery quicker (with the same use) as my iPhone 3G, but I'm thinking it is psychological because we can view the "%" now.
Glad I haven't sold off my iPhone 3G yet.

Similar Messages

My macbook white 2008 model just died after a month unused

My macbook white early 2008 model just died after a month unused. is there a fix to this? the system profiler on power is
Battery Information:
Model Information:
Serial Number:
Manufacturer:    DP
Device name:    ASMB016
Pack Lot Code:    0002
PCB Lot Code:    0000
Firmware Version:    0110
Hardware Revision:    0500
Cell Revision:    0102
Charge Information:
Charge remaining (mAh):    0
Fully charged:    No
Charging:    No
Full charge capacity (mAh):    0
Health Information:
Cycle count:    213
Condition:    Check Battery
Battery Installed:    Yes
Amperage (mA):    57
Voltage (mV):    3662
System Power Settings:
AC Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    5
Automatic Restart On Power Loss:    No
Wake On AC Change:    No
Wake On Clamshell Open:    Yes
Wake On LAN:    Yes
Display Sleep Uses Dim:    Yes
Battery Power:
System Sleep Timer (Minutes):    5
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    1
Wake On AC Change:    No
Wake On Clamshell Open:    Yes
Display Sleep Uses Dim:    Yes
Reduce Brightness:    Yes
Hardware Configuration:
UPS Installed:    No
AC Charger Information:
Connected:    Yes
Charging:    No

You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
Or for $129 from The Apple Store http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY

HT4972 myipod touch 4th gen just died after installing the newest itunes? My comp wont even pick it up, not to mention itunes, help

I was asked to install the newest itunes and my software on my ipod just died. its dead so it does a cycle now over and over. it starts with an apple on it, apple fades away and the whole screen proceeds to light up and stay that way untill it cycles and goes back to dieing and shows the battery charging in red till the apple comes on again. My computer wont even pick up that there is a drive plugged into it. Also when i was installing the newest itunes on my comp, there was a error msg saying" ipod service..." something.... thanks Connie
<Edited by Host>

Try:
iOS: Not responding or does not turn on
iOS: Device not recognized in iTunes for Windows
You are not address ing Apple here. We are just users like yourself.
I also requested that Apple remove your email and text number.

Ibook G3 just died after installing 10.4.1 update

I have been using my ibook g3 with 10.2 for a couple of months now. I suffered from the logic board/ graphics chip problem but managed to fix this myself.
Today i got 10.4 and it installed fine, I had a strange problem where my speedtouch modem wouldnt install but I managed to connect a network up to my pc.
I then tried software update but would not connect over the network so I had to download update 10.4.1 from the apple site.
It installed fine, but when it went to reboot itself it went straight to sleep instead of turning off. It did not respond then and It would not turn off or wake up, not even by holding the power button down.
After a while i took the battery out, left it a bit and then placed it back in. When I went to boot up nothing happend.
I have tried everything i can possibly think of like resetting the power, taking out the battery but it still wont work.
There is a strange thing where if the battery and adapter are pluuged in and you reset the power the adapter led cuts out. I have not noticed this before so am not sure wether this is normal or not.
appologies for the long rambling but if anyone has any ideas or thought's then please let me know.
Cheers John

Hmm, interesting problem. Now, when you say you reset the power did you do what's known as a PMU reset?
From knowledge base article: http://docs.info.apple.com/article.html?artnum=14449#faq6
For iBook (16 VRAM) and later models of iBook, there is no physical reset button.
If the computer is on, turn it off.
Reset the power manager by simultaneously pressing and then releasing Shift-Control-Option-Power on the keyboard. Do not press the fn (Function) key while using this combination of keystrokes.
Wait 5 seconds.
Press the Power button to restart the iBook computer.

Muvo TX SE just died after trying to update firmw

im getting seriously pissed off, i just tried to update the firmware and some reason there was error and now the player doesnt work at all and cant be recognised by my pc ! what can i do ??

If the firmware update failed then you need to connect your player in Recovery Mode (search in old posts for instructions) and install the firmware again.
PB

I tried to update my sons iPad and now it won't turn on or off just a picture of a cable and I tunes symbol. Can it be fixed or is it broken I've seen posts saying their iPads died after doing updates.

I tried to update my sons iPad now it won't turn on or off it shows a cable and iTunes symbol tried holding down sleep button & screen button but no luck does this mean it's Broken I've seen posts saying their iPad died after doing updates.

It's not broken, it just means that the iPad has gone into recovery mode : http://support.apple.com/kb/ht1808
You will need to connect the iPad, via its cable, to a computer's iTunes (you will need an up-to-date version of iTunes installed on the computer), and you should then be able to reset the iPad and restore/resync the content to it.

After resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!

after resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!

Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device

My 4th gen Shuffle just up and died after 2.5 years. It won't charge when attached to my Mac. Can I replace a battery or do I have to buy a new one?

My 4th gen Shuffle just up and died after 2.5 years. It won't charge when attached to my Mac. Can I replace a battery or do I have to buy a new one?

Hi Soldier7439,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Do you have the power adapter to plug into an electrical outlet?
Apple - Support - iPod - iPod nano (4th generation) Troubleshooting
http://www.apple.com/support/ipod/five_rs/nano4gen/#
Apple - Support - iPod nano
http://www.apple.com/support/ipodnano/
Cheers,
- Judy

HT1338 I have just bought a new Mac Pro after my old one died after nearly 10 years. I have most of my music backed up on CDs, but when i load them into iTunes they are only identified as Track 1, 2, etc. Can I transfer from my iPod and how?

I have just bought a new Mac Pro after my old one died after nearly 10 years. I have most of my music backed up on CDs, but when i load them into iTunes they are only identified as Track 1, 2, etc. Can I transfer from my iPod and how?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

My Imac drive just died. Always backed up with Time machine to a WD My Passport. But after connecting it to my other imac (also running Snow Leopard) all the files are missing. I click on backup.backupdb but no files - just applications. Any ideas?

My Imac drive just died. Always backed up with Time machine to a WD My Passport. But after connecting it to my other imac (also running Snow Leopard) all the files are missing. I click on backup.backupdb but no files - just applications. Any ideas?

Welcome to the Communities.
We want to help you but unfortunately you have given us insufficient information.
Please find a moment to tell us more about your machine, the model identifier, the OS version, and the total amount of RAM you have. It also helps to know where you are, nothing specific, just the country. Macs do not run on iOS 6.1.6 as your profile says.
Then fill those same details in your profile for future use
These documents may prove helpful .. Solving Time Machine problems Pondini FAQ
http://pondini.org/TM/ Troubleshooting.html

Ipod died after upgrading to itunes 7 and ipod 1.2

So i upgraded my itunes to the new version and then i upgraded my ipod to 1.2. Then after restarting the computer i plugged the ipod in and let it update. Itunes freezes up and then won't recognize my ipod so i couldn't safely eject it. I unplug my ipod manually which gives me the exclamation sign then it just died. I couldn't turn it on at all. The screen is just dead and the hold button is not on. Anyone have any ideas?

I have the same problem but this only happens on my computer. It works fine during the most of it but when i use another program that makes a sound- weather it be a message noise or a game etc. it starts to skip and wont stop untill i stop the iTunes and start song again. This didnt happen with the previous version of iTunes.
Any advice??

My Z10 died after restoring from BlackBerry-Link

Z10 died after restoring thru BlackBerryLink on desktop How do I bring back life to my z10 which died totally when I've reset successfully using BlackBerry-Link; which completely died after reset (just mentioning it as successful operation because I do remember the bblink saying my z10 was completed restoring) ... But just afterwards as I disconnect from the computer it came nothing frown emoticon No nothing now as if there is no battery at all; And I think it's not because of depleted battery, if so then at-least it would have given as of the the cross-sign on display as of I used to have on my earlier versions of old blackberry !!! At first it came www.bberror.com/bb10-0015and when I install bblink on my computer and restored it thru bblink and updated only now I remember is I saw green solid light on my z10. Do you know how much guts I need to go inside my house specially my room where exactly downstairs to my room got cracked due to the massive earthquake here in Nepal !!! And now I'm completely **bleep** up and got isolated ... How on the earth I say I'm proud to be BlackBerry user ... I tried to look for genuine service centre here in Kathmandu but can't find a single and I think how on earth I just give it to repair to the maintainance here they lack zero knowledge of English language and only are after androids and iOS !!! PLEASE HELP ME BRINGING BACK LIFE TO MY Z10 WHICH IS IN COMMA and doesn't prefer to blink the led and light the display ; not anything it does !!! Yours sincerely Santosh Lamichhane {REMOVED}, {REMOVED} {REMOVED} How do I bring back life to my z10 which died totally when I've reset successfully using BlackBerry-Link; which completely died after reset (just mentioning it as successful operation because I do remember the bblink saying my z10 was completed restoring) ... But just afterwards as I disconnect from the computer it came nothing frown emoticon No nothing now as if there is no battery at all; And I think it's not because of depleted battery, if so then at-least it would have given as of the the cross-sign on display as of I used to have on my earlier versions of old blackberry !!! At first it came www.bberror.com/bb10-0015and when I install bblink on my computer and restored it thru bblink and updated only now I remember is I saw green solid light on my z10. Do you know how much guts I need to go inside my house specially my room where exactly downstairs to my room got cracked due to the massive earthquake here in Nepal !!! And now I'm completely **bleep** up and got isolated ... How on the earth I say I'm proud to be BlackBerry user ... I tried to look for genuine service centre here in Kathmandu but can't find a single and I think how on earth I just give it to repair to the maintainance here they lack zero knowledge of English language and only are after androids and iOS !!! PLEASE HELP ME BRINGING BACK LIFE TO MY Z10 WHICH IS IN COMMA and doesn't prefer to blink the led and light the display ; not anything it does !!! Yours sincerely Santosh {REMOVED} {REMOVED} Dear respected madam/sir, How do I bring back life to my z10 which died totally when I've reset successfully using BlackBerry-Link; which completely died after reset (just mentioning it as successful operation because I do remember the bblink saying my z10 was completed restoring) ... But just afterwards as I disconnect from the computer it came nothing frown emoticon No nothing now as if there is no battery at all; And I think it's not because of depleted battery, if so then at-least it would have given as of the the cross-sign on display as of I used to have on my earlier versions of old blackberry !!! At first it came www.bberror.com/bb10-0015and when I install bblink on my computer and restored it thru bblink and updated only now I remember is I saw green solid light on my z10. Do you know how much guts I need to go inside my house specially my room where exactly downstairs to my room got cracked due to the massive earthquake here in Nepal !!! And now I'm completely **bleep** up and got isolated ... How on the earth I say I'm proud to be BlackBerry user ... I tried to look for genuine service centre here in Kathmandu but can't find a single and I think how on earth I just give it to repair to the maintainance here they lack zero knowledge of English language and only are after androids and iOS !!! PLEASE HELP ME BRINGING BACK LIFE TO MY Z10 WHICH IS IN COMMA and doesn't prefer to blink the led and light the display ; not anything it does !!! Yours sincerely Santosh {REMOVED}
Mod Edit: Edited post to remove personal information to comply with the Community Guidelines and Terms and Conditions of Use

Follow the directions here:
https://discussions.apple.com/docs/DOC-3141

My battery died after 3 yrs and 3 months??????

I don't know if my ipod is the classic. I bought the 20 GB in July 2005.
Is this common for the battery to die after 3 years? I turned it on and it made this funny noise. Then a pic of the battery and the triangle with the ! showed up. What do I do now? Thanks

Apple will replace the battery for you. They replace the iPod with a refurbished item, so you lose whatever was on your iPod. Info is here:
http://www.apple.com/support/ipod/service/battery/
Various third-party vendors will also replace the battery, or sell you a kit to do it yourself. The iPod does look like it's a totally seamless item, but it can be disassembled pretty easily. There are videos on YouTube that show how it's done, and most of the kit-sellers provide detailed instructions. Just Google "ipod battery replacement" and you'll find tons of sites. Look at ipodjuice.com - they have lots of information about battery replacement, disassembly, iPod model identification, etc (I'm not endorsing them, I just think their site is very informative).
Message was edited by: Dick Young

Captivate 7 just died

I've been using Captivate 7 for about three weeks, but yesterday it just died. When I execute the application file there is nothing happening at all. I have started Task Manager and it seems that the process runs for about half a second before disappearing. I cannot use the project file either as the same thing happens. I am running Captivate 7 on a Windows XP PC with a 500Gb HDD, 4Gb ram and a LAN connection. I have uninstalled it and reinstalled it to no avail, and frankly, the Adobe Technical Support is pretty dire. Has anyone else here suffered a catastrophic failure of Ver 7, if so, did they resolve it and how.
I have all my project files locally as I know the issues when saving over a network.
Thanks

I had this happen on an XP machine and Adobe help said CP7 wasn't meant to be used on an XP machine. Also did you activate your software? If you've just been logging in without activating it your time is up and you'll need them to help you activate it. We had problems with activation and had it quit working after about 3 weeks.
Susan Wright (Equilady)Remember, the mighty oak was just a nut that held its ground.
http://www.equilady.com

Blackberry Bol 9000 just died

woke up this morning and my 5 day old blackberry has just died. Was fully charged; win;t turn on, won;t chanreg - even if battery removed. Had this once before and had to get it replaced. In fact I have had 6 blackberrys and had to return 4 quickly as they imploded, like this
Have tried battery, charged up and the on/off button on the RHS
I like blackberrys but this happens way too often, so its in the junk class

remove battery
put on charger
put in battery after red LED goes out
Repeat after 5 minutes
leave on charger for 24 hours and repeat above in case its on board battey is deppleated.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

3G S just died after 4days.

Similar Messages

Maybe you are looking for