3G service not available in our area?

I live outside of the Dallas area in Texas and have been told that the 3G service is not available in our area. So does that mean that I could buy the new 3G iPhone, pay AT&T for the service, and not receive the speed I expected?

When I bought my iPhone July 11, there was no 3G service in my home area and the AT&T store manager told me not to expect it until 2nd qtr 2009. However, I've been receiving good 3G signal for over a month, even though the AT&T coverage map still shows it as non-3G. FWIW, they seem to be rapidly expanding 3G.

Similar Messages

  • Cron service not available error

    A production issue appeared today at one of our customer
    sites.... and I am unable to login to CFadmin. I stop and restart
    the services, but still the same issue appears. See below.
    Anyone have any thoughts? Ideas? Has anyone ever seen this
    before??
    Error Occurred While Processing Request
    The Cron service is not available.
    This exception is usually caused by service startup failure.
    Please check your server configuration.
    The error occurred in Application.cfm: line 78
    -1 : Unable to display error's location in a CFML template.
    Please try the following:
    Check the ColdFusion documentation to verify that you are
    using the correct syntax.
    Search the Knowledge Base to find a solution to your problem.
    Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2;
    SV1; .NET CLR 1.1.4322)
    Remote Address 127.0.0.1
    Referrer
    Date/Time 25-Apr-06 12:57 PM
    Stack Trace (click to expand)
    at
    cfApplication2ecfm105811000.runPage(C:\blackstone_final\cfusion\wwwroot\CFIDE\administrat or\Application.cfm:78)
    coldfusion.server.ServiceFactory$ServiceNotAvailableException:
    The Cron service is not available.
    at
    coldfusion.server.ServiceFactory.getCronService(ServiceFactory.java:118)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
    Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown
    Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
    Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at
    coldfusion.runtime.java.JavaProxy.invoke(JavaProxy.java:74)
    at coldfusion.runtime.CfJspPage._invoke(CfJspPage.java:1627)
    at
    cfApplication2ecfm105811000.runPage(C:\blackstone_final\cfusion\wwwroot\CFIDE\administrat or\Application.cfm:78)
    at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
    at
    coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:343)
    at
    coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
    at
    coldfusion.filter.CfincludeFilter.include(CfincludeFilter.java:33)
    at
    coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:157)
    at
    coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:51)
    at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
    at
    coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:50)
    at
    coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52)
    at
    coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
    at
    coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
    at
    coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
    at
    coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
    at coldfusion.CfmServlet.service(CfmServlet.java:105)
    at
    coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
    at
    jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
    at
    jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
    at
    jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
    at
    jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
    at
    jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
    at
    jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:349)
    at
    jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:457)
    at
    jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:295)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

    I'm receiving the exact same error as the original post. We tried every suggestion on this forum and still get the 'cron service not available' error. I've also checked and we don't have a neo-cron.xml file. We are using Coldfusion 8.
    The Cron service is not available.
    This exception is usually caused by service startup failure. Check your server configuration.
    The error occurred in Application.cfm: line 84
    Called from Application.cfm: line 4
    Called from Application.cfm: line 1
    -1: Unable to display error's location in a CFML template.
    Any help will be appreciated. Thanks.
    Crystal

  • Itunes will not install..windows INSTALLER service not available.windows 7

    I am trying to find a fix for this...just bought a new computer with windows 7, all updates have been performed. Itunes will not install...it just stops and says "windows installer service not available" Can't find a stand alone downloadable version of installer 5.0 which is what comes with 7 from the research I have done. I have the newest version of itunes saved on desktop, tried running it from desktop, tried running as admin, tried several other ideas that I found on here and Microsoft..but nothing is working. Any advice?
    Message was edited by: ehindahl

    Same error message "This version is for a 32 bit computer, yours is a 64 bit!"
    Doublechecking ... by any chance did you migrate a 32-bit version of the iTunes, Apple Mobile Device Support and Bonjour programs to the 64-bit machine from a 32-bit machine using the PC Mover utility?
    (Your symptoms are consistent with that ... the installer service throws the message when trying to uninstall the 32-bit itunes and related 32-bit componentry prior to installing the new 64-bit versions.)

  • My phone says my cdma service not available what does this mean

    my phone says cdma service not available what does this mean

    This has just happened to me. My phone (Samsung Intensity) worked great on Sunday. Sent and received several texts while at home on Sun during Steeler football game. Monday night, while sitting outside of my home in my driveway, could not make a call. Message said CDMA SERVICE NOT AVAILABLE. On the front of my phone it says Searching SVC. No bars. Icon of a cell phone with a diagonal line through it. Tuesday night, same. Didn't think about trying it at my office. Tried the dialing *228 send option 2 but that doesn't exactly work when the phone doesn't work. My husband's phone (Casio GZOne) also not working at our house.

  • ORA-29278: SMTP transient error: 421 Service not available

    Hi all,
    I'm using Oracle 10g working on Windows XP Home.
    I'm trying to send a basic mail from my stored procedure.
    When I tried to run the code, I get ORA-29278: SMTP transient error: 421 Service not available.
    Below is the code I'm trying.
    CREATE OR REPLACE PROCEDURE SEND_MAIL (
    msg_to varchar2,
    msg_subject varchar2,
    msg_text varchar2 )
    IS
    c utl_smtp.connection;
    rc integer;
    msg_from varchar2(50) := 'Oracle9.2';
    mailhost VARCHAR2(30) := '127.0.0.1'; -- local database host
    BEGIN
    c := utl_smtp.open_connection(mailhost, 25); -- SMTP on port 25
    dbms_output.put_line('ok');
    utl_smtp.helo(c, mailhost);
    utl_smtp.mail(c, msg_from);
    utl_smtp.rcpt(c, msg_to);
    utl_smtp.data(c,'From: Oracle Database' || utl_tcp.crlf ||
    'To: ' || msg_to || utl_tcp.crlf ||
    'Subject: ' || msg_subject ||
    utl_tcp.crlf || msg_text);
    utl_smtp.quit(c);
    EXCEPTION
    WHEN UTL_SMTP.INVALID_OPERATION THEN
    dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
    WHEN UTL_SMTP.TRANSIENT_ERROR THEN
    dbms_output.put_line(' Temporary e-mail issue - try again');
    dbms_output.put_line (sqlerrm);
    WHEN UTL_SMTP.PERMANENT_ERROR THEN
    dbms_output.put_line(' Permanent Error Encountered.');
    END;
    Below are the possibilites I tried..
    I tried to ping localhost.. This is the output I get
    C:\Documents and Settings\Me>ping localhost
    Pinging polasa [127.0.0.1] with 32 bytes of data:
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Ping statistics for 127.0.0.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    In one of the thread, a user suggested to do the following
    Go to Control Panel->Add or Remove Programs->Click on
    Add/Remove Wndows Components
    Check IIS check box.
    Select Internet Information Service (IIS) option and click on Details button
    Check whether SMTP Service is checked or not.
    If not selected then select SMTP check box.
    This process should be done on server.
    It will help out from ORA-29278: SMTP transient error: 421 Service not available
    problem.
    There is no IIS in my Windows Components..
    Any suggestions? Thanks in advance

    It sounds like you don't have an SMTP server running on your local machine.
    Even if you install IIS (or some other SMTP server), that is probably not enough to send email outside of your machine because your machine is unlikely to be trusted by the downstream mail servers. If you are running this in a company, you'll need to talk to your company's mail admin to determine where the corporate SMTP server is running. If you running this at home, you'll need to find out from your ISP what SMTP servers are available to you.
    Justin

  • Caf/eu/gp/model service not available (GP & BPM Connection)

    Hi all,
      we are trying to make a connection between Guided Procedure and BPM. We have configured the J2EE system and ABAP system accordingly. But when we try to use it from the J2EE system, we are getting an error - "caf/eu/gp/model Service not available in Target System". Is there any any way to get this service or any other workaround available?
    Thanks in advance,
    Anirban

    Hi all,
      we are trying to make a connection between Guided Procedure and BPM. We have configured the J2EE system and ABAP system accordingly. But when we try to use it from the J2EE system, we are getting an error - "caf/eu/gp/model Service not available in Target System". Is there any any way to get this service or any other workaround available?
    Thanks in advance,
    Anirban

  • Runtime Service not Available after Copy

    Hi
    OWB 10g,
    Oracle DB 8.1.7.4.12
    I'm trying to copy the whole database, including all OWB and Runtime Repository and reload to another server.
    After that, OWB client works fine but when I try to connect Deployment Manager, the error massage shows: Runtime Service not Availabe. ( the Runtime connection properties are changed to match the new server). I then tried to manually start the runtime service, the error massage shows: Not available. And I then run Service_Doctor, it shows "Platform Service Not Available".
    For what I searched from metalink and here, the solution is always saying 'Reinstall the Runtime Service'.
    Is there any idea that I can make it work without reinstall because I don't want to start from scratch to redeploy and reload all of my data?
    I'm waiting on line.
    Thank you,
    Daming

    Hi Igor,
    I manually change table wb_rt_servuce_nodes with the proper hostname, service name, OWB home name. Also check the value in OWBRT_SYS.OWBRTPS, no problem. But Runtime service still not started. So I give up and then try to do it from scratch.
    I tried to reinstall all the repositories (OWB and runtime ) on the new server and still got the same problem.
    What I've done is drop all the repositories via Runtime Assistant and then done 'drop user rtr cascade' from sqlplus for all the target schemas and rtr/rtu. Then create new reopositories again. After that I restart the database , runtime service not started. Then I tried manually start it, failed.
    Anyidea? Should I reinstall the software?
    Thanks,
    Daming

  • I have one pc with service not available"sapdp00"

    In my 8 year career I never had problem using "services" file in "c:\windows\service32\drivers\etc".
    However there is an XP machine (with regular connection to network) with problem "service not available"sapdp00". It is like this settings come from somewhere else.  I tried with search for "services" butunsuccessfully
    The "service" file is copied from my XP machine where everything is functionning in same network. How could I trace where the problem is?

    there are known viruses or applications that changes the services file path. MS-Messenger 7.50 did that in the past.
    check if SAP not 882741 applied to you.
    if not, copy the services file from another PC and see if this helps.

  • CIMC on C210 server throws Error 2001: Service not available message

    I am trying to configure vmware on a brand new C210 server for the first time and the directions say to access the CIMC and load the vmware media. Sounds easy enough except every time I go to the CIMC webpage I recieve an " error 2001: Service not available"  message on every page I go to and none of the server info fields are populated. If I try to make any changes and save my settings the same message pops up and no changes are saved. Almost like the CIMC doesn't recognize the server or hardware. I ran the host update utility just now and upgraded the firmware for everything to the latest version but still no progress. Anyone have this happen or know how I can fix this?
    Thanks in advance!
    Jess

    I got it working on one of the servers, and havent tried the same solutions on any other server.
    What i did was manually adding an IP adress to the management IP, then save the config before rebooting. After rebooting i put it back to get IP from DHCP, and saved the config. After a secound reboot i was able to use the mangement interface without the 2001 error.
    I'm not sure if it will work on the rest of the servers, but it's worth a try
    Regards
    Alex

  • ABAP Central Service not available alert in Technical Monitoring

    Hi Gurus,
    Need help with this alert which i am getting from Solman 7.1 SP10.
    ABAP Message Server Status
    XXX-ABAP
    3
    3
    3
    No process found for: msg_server(.*)
    I have already checked following notes but no luck
    1419603 - Missing ABAP SAP Central Services (ASCS) instance in SLD/LMDB
    1916237 - ABAP Central Service not available alert in Technical Monitoring
    Our managed system kernel is 720 P 401 as per-requisites for the sld registration.
    Have tried few things here and there but no luck.
    Please suggest is any has any suggestion or solution.
    Dev

    Hi Roland,
    I followed the note 1717846 and performed all the steps successfully.. But still no luck with ASCS in SLD.
    Any ideas or suggestions .?
    Attaching the logs for your reference:
    Tue Apr 15 15:52:23 2014 Parsing XML document.
    Tue Apr 15 15:52:23 2014 Supplier Name: BCControlInstance
    Tue Apr 15 15:52:23 2014 Supplier Version: 1.0
    Tue Apr 15 15:52:23 2014 Supplier Vendor:
    Tue Apr 15 15:52:23 2014 CIM Model Version: 1.5.29
    Tue Apr 15 15:52:23 2014 Using destination file '/usr/sap/XXX/SYS/global/slddest.cfg'.
    Tue Apr 15 15:52:23 2014 Use binary key file '/usr/sap/XXX/SYS/global/slddest.cfg.key' for data decryption
    Tue Apr 15 15:52:23 2014 Use encryted destination file '/usr/sap/XXX/SYS/global/slddest.cfg' as data source
    Tue Apr 15 15:52:23 2014 HTTP trace: false
    Tue Apr 15 15:52:23 2014 Data trace: false
    Tue Apr 15 15:52:23 2014 Using destination file '/usr/sap/XXX/SYS/global/slddest.cfg'.
    Tue Apr 15 15:52:23 2014 Use binary key file '/usr/sap/XXX/SYS/global/slddest.cfg.key' for data decryption
    Tue Apr 15 15:52:23 2014 Use encryted destination file '/usr/sap/xXX/SYS/global/slddest.cfg' as data source
    Tue Apr 15 15:52:23 2014 ******************************
    Tue Apr 15 15:52:23 2014 *** Start SLD Registration ***
    Tue Apr 15 15:52:23 2014 ******************************
    Tue Apr 15 15:52:23 2014 HTTP open timeout     = 420 sec
    Tue Apr 15 15:52:23 2014 HTTP send timeout     = 420 sec
    Tue Apr 15 15:52:23 2014 HTTP response timeout = 420 sec
    Tue Apr 15 15:52:23 2014 Used URL: http://sapr6bv:51600/sld/ds
    Tue Apr 15 15:52:23 2014 HTTP open status: true - NI RC=1
    Tue Apr 15 15:52:23 2014 HTTP send successful.
    Tue Apr 15 15:52:23 2014 Return code: 200 --- Return message: (OK)
    Tue Apr 15 15:52:23 2014 HTTP response: Success. HTTP status code: 200
    Tue Apr 15 15:52:23 2014 ****************************
    Tue Apr 15 15:52:23 2014 *** End SLD Registration ***
    Tue Apr 15 15:52:23 2014 ****************************

  • PE8: Folder Monitoring Service not available?

    I've bought the german version of PE 8. It could be a nice program, but there are still some bugs/problems - despite it works *very* slow on my Lenovo W500, 8 GB RAM, 2,8GHZ Dual Core, Windows 7 64.
    If I go to "Organizer" and then use the menu "File" -> "Folder monitoring" there comes a message "Der Ordnerüberwachungsservice ist nicht verfügbar" which should mean translated "Folder monitoring service not available" (I hope that this translation is OK?).
    I even looked into Windows -> System Control -> Services and searched for a stopped service like that - but I couldn't find any.
    Do you have any similar problems or suggestions?
    Friendly
    Philipp
    Lenovo W500, 2,8 Ghz T9600, 8GB RAM, Windows 7 Pro 64-Bit
    http://ferienhausbretagne.tumblr.com

    I've bought the german version of PE 8. It could be a nice program, but there are still some bugs/problems - despite it works *very* slow on my Lenovo W500, 8 GB RAM, 2,8GHZ Dual Core, Windows 7 64.
    If I go to "Organizer" and then use the menu "File" -> "Folder monitoring" there comes a message "Der Ordnerüberwachungsservice ist nicht verfügbar" which should mean translated "Folder monitoring service not available" (I hope that this translation is OK?).
    I even looked into Windows -> System Control -> Services and searched for a stopped service like that - but I couldn't find any.
    Do you have any similar problems or suggestions?
    Friendly
    Philipp
    Lenovo W500, 2,8 Ghz T9600, 8GB RAM, Windows 7 Pro 64-Bit
    http://ferienhausbretagne.tumblr.com

  • ORA-29278: SMTP transient error:421 Service not available on oracle 10g

    HIi,
    I am trying to send e-mails by using PL/Sql procedure . I am using UTL_MAIL/UTL_SMTP on oracle 10g R1 database.
    There is no problem in creating procedure,but when i am doing execution i am getting the mention error.
    I am trying to send mail with attachment as excel file.
    ORA-20001: The following error has occured: ORA-29278: SMTP transient error:
    421 Service not available
    ORA-06512: at "SCOTT.MAIL_ATT_RAW", line 64
    ORA-06512: at line 1
    -----my procedure code------
    CREATE OR REPLACE PROCEDURE mail_att_raw(filename varchar2) AS
    fil BFILE;
    file_len PLS_INTEGER;
    MAX_LINE_WIDTH PLS_INTEGER := 54;
    buf RAW(2100);
    amt BINARY_INTEGER := 2000;
    pos PLS_INTEGER := 1; /* pointer for each piece */
    filepos PLS_INTEGER := 1; /* pointer for the file */
    filenm VARCHAR2(50) := filename; /* binary file attachment */
    data RAW(2100);
    chunks PLS_INTEGER;
    len PLS_INTEGER;
    modulo PLS_INTEGER;
    pieces PLS_INTEGER;
    err_num NUMBER;
    err_msg VARCHAR2(100);
    resultraw RAW(32000);
    BEGIN
    /* Assign the file a handle */
    fil := BFILENAME('BFILE_DIR', filenm);
    /* Get the length of the file in bytes */
    file_len := dbms_lob.getlength(fil);
    /* Get the remainer when we divide by amt */
    modulo := mod(file_len, amt);
    /* How many pieces? */
    pieces := trunc(file_len / amt);if (modulo <> 0) then
    pieces := pieces + 1;end if;/* Open the file */
    dbms_lob.fileopen(fil, dbms_lob.file_readonly);/* Read the first amt into the buffer */
    dbms_lob.read(fil, amt, filepos, buf);/* For each piece of the file . . . */
    FOR i IN 1..pieces LOOP/* Position file pointer for next read */
    filepos := i * amt + 1;/* Calculate remaining file length */
    file_len := file_len - amt;/* Stick the buffer contents into data */
    data := utl_raw.concat(data, buf);/* Calculate the number of chunks in this piece */
    chunks := trunc(utl_raw.length(data) / MAX_LINE_WIDTH);/* Don't want too many chunks */
    IF (i <> pieces) THEN
    chunks := chunks - 1;
    END IF;/* For each chunk in this piece . . . */
    FOR j IN 0..chunks LOOP/* Position ourselves in this piece */
    pos := j * MAX_LINE_WIDTH + 1;/* Is this the last chunk in this piece? */
    IF (j <> chunks) THEN len := MAX_LINE_WIDTH;
    ELSE
    len := utl_raw.length(data) - pos + 1;
    IF (len > MAX_LINE_width) THEN
    len := MAX_LINE_WIDTH;
    END IF;
    END IF;/* If we got something, let's write it */
    IF (len > 0 ) THEN
    resultraw := resultraw || utl_raw.substr(data, pos, len);
    END IF;
    END LOOP;/* Point at the rest of the data buffer */
    IF (pos + len <= utl_raw.length(data)) THEN
    data := utl_raw.substr(data, pos + len);
    ELSE
    data := NULL;
    END IF;/* We're running out of file, only get the rest of it */
    if (file_len < amt and file_len > 0) then
    amt := file_len;
    end if;/* Read the next amount into the buffer */dbms_lob.read(fil, amt, filepos, buf);
    END LOOP;/* Don't forget to close the file */
    dbms_lob.fileclose(fil);
    SYS.UTL_MAIL.SEND_ATTACH_RAW(sender => '[email protected]', recipients => '[email protected]',subject => 'Testmail', message => 'Hallo', attachment => resultraw, att_filename => filename);
    EXCEPTION
    WHEN OTHERS THEN--dbms_output.put_line('Fehler');
    raise_application_error(-20001,'The following error has occured: ' || sqlerrm);
    END;
    Please suggest me what settings i need to change. This same procedure is running on another maching,but not on my machine.
    If somebody is having any other simple procedure ,please help me.
    My SMTP port -25
    Thanks in advance.

    Hi Justin,
    Please get the answers of your queries
    The error you're getting is coming from the SMTP server you are trying to connect to.
    - What SMTP server is your database configured to use?
    Reply - I am using IIS(5.0)
    - What SMTP server is the database where this code is working configured to use?
    Reply - Same IIS. Database is installed locally on my machine only. I am trying to send mail locally to me only,Not to the outside person.
    - Has the SMTP server been configured to allow connections from both machines?
    Reply - Yes
    One more query, do we really require to set the SMTP_OUT_SERVER parameter for SCOPE=BOTH
    ALTER SYSTEM SET smtp_out_server = '172.16.1.10' SCOPE=BOTH
    I am not able to set like this for BOTH,only for SPFILE i can set ?.
    My SMTP Server IP=172.16.1.10
    PORT- 25
    Thanks
    Manoj

  • Everytime i download.(service not available/wap co...

    I have nokia 2730 classic...everytime i download something on the internet it will not continue to download and it always says that service not available/wap connection ended.pls help me fiz this problem.

    I have an Aspire 1551 which I loaded 8 onto but I cannot get to any drivers on the support site!!!  GRRRR! I tried searching by model and also the SNID with no sucess. Please, please don't tell me Acer purged their database! Right now I have a perfectly good laptop which is useless at the moment because I cannot load the necessary drivers. @ Acer Support:  please fix your support page so we can download drivers!!! People are counting on their computers to pay bills, manage bank accounts and keep in touch with family/friends!!!  It is really hurting some people who need their computers!!!!

  • SMTP service not available

    Hi,
    How to send mail through the following code ?
    CREATE OR REPLACE PROCEDURE send_mail (p_to IN VARCHAR2,
    p_from IN VARCHAR2,
    p_message IN VARCHAR2,
    p_smtp_host IN VARCHAR2,
    p_smtp_port IN NUMBER DEFAULT 25)
    AS
    l_mail_conn sys.UTL_SMTP.connection;
    BEGIN
    l_mail_conn := sys.UTL_SMTP.open_connection(p_smtp_host, p_smtp_port);
    sys.UTL_SMTP.helo(l_mail_conn, p_smtp_host);
    sys.UTL_SMTP.mail(l_mail_conn, p_from);
    sys.UTL_SMTP.rcpt(l_mail_conn, p_to);
    sys.UTL_SMTP.data(l_mail_conn, p_message || UTL_TCP.crlf || UTL_TCP.crlf);
    sys.UTL_SMTP.quit(l_mail_conn);
    END;
    BEGIN
    send_mail(p_to => '[email protected]',
    p_from => '[email protected]',
    p_message => 'This is a test message.',
    p_smtp_host => 'mail.google.com');
    END;
    ERROR:
    ORA-29278: SMTP transient error: 421 Service not available
    ORA-06512: at "SYS.UTL_SMTP", line 20
    ORA-06512: at "SYS.UTL_SMTP", line 96
    ORA-06512: at "SYS.UTL_SMTP", line 138
    ORA-06512: at "APPS.SEND_MAIL", line 9
    ORA-06512: at line 2
    Please help me to get through the error.
    Thanks in advance ,
    Pradeep
    Edited by: user11165897 on Dec 7, 2012 2:27 AM

    Hi,
    here all the input values are wrong.
    By providing correct host, email, port it is working fine now..
    pradeep

  • WD demo application: "Service not available" although service active

    Hi everyone
    I am new in Web Dynpro and while doing some tutorials I came across WD application DEMO_CONTEXT_PROP (package SWDP_DEMO). I wanted to test it, but I get error page "Service not available" and error code 403 "Forbidden". And if I test the service directly in SICF, I get error message SHTTP009.
    The service itself is active in SICF, as well as the mentioned services in SAP note 1088717. And I can run other WD demo applications (such as DEMO_TABLE) without problems. Only this one is giving me problems.
    The funny thing is that in SICF there are 2 services called DEMO_CONTEXT_PROP! One is greyed out, the other one is active. But even if I right-click on the one that is greyed out, is still says "active"!?
    Any suggestions? Thanks!

    Hello Jan,
    we had this issue some weaks ago. When upgrading a system to EhP3 SAP delivered a new WebDynpro ICF service which had already been delivered earlier in a support package.
    Problem is that the name of the SICF service is not its key. The real key for the service is a generated GUID which is stored in the database. If you create a service and later SAP delivers it or if SAP developed in 2 different release stacks the service may appear dublicated as you have 2 different GUIDs for the service. If the service is there twice the system tries one by chance if you are unlucky it takes the inactive one and you get the 403 error.
    Thanls to Ramp Up status we discussed this directly with development. Unfortunately there is no real cleanup / consolidation function yet. The straight forward solution was renaming one of the services. As you only use a Demo Web Dynpro ICF service any of them will work. Perhaps you have to activate the one which is not renamed (you cannot really choose which you rename as the SICF tree is totally confused by the 2 services).
    If you have this trouble for a production service you need the SAP to tell you which service (which GUID) is the long term supported and rename the other (perhaps you have to rename, rename the other and then rename the first back). If you do not do this you get the same problem with every Support Package which touches the ICF Services again.
    Best Regards
    Roman Weise

Maybe you are looking for