3G shows apple logo but wont load FW
It just keeps showing the apple logo. i cant plug it into a PC or a Mac (with firewire). ive tried rebooting it, loading forced disk mode, and loading diagnoistic mode, but it wont get past the apple phase. the warranty is up so i cant go in and get a new one or have them look at it.
thanx for all the help
Im having the same prob with my older ipod that i just recently tried to see if i can fix
Similar Messages
-
I disconnected my iPad unconsciously while it was updating ios 7.0.4 and it just stuck on that screen showing apple logo and a loading bar that just won't move on what to do now ????
It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
If that still won't work, post back with detailed information as to what exactly does happen as you go through the process. -
my iphone was powered off due to low battery charged it after few hours it took 30 min to show apple logo but i noticed that my phone was charging slow and draining fast, after this updated it to 8.1.2 same problem & rest to factory still same problem (plz help)
Hello abdullahfromvenus,
Welcome to the Apple Support Communities! I see that you are experiencing issues charging your iPhone 5. I can understand how frustrating that may be. The following resource provides a few troubleshooting steps that may help to isolate and troubleshoot this issue:
If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT203030
Cheers,
Matt M. -
Error 3194 still presist while restoring ipod touch 4g, just shows apple logo and wont start
Method 1: i have tried almost everything, 'hosts' file editing (adding and deleting that ip gs.apple.com thing)
Method 2: redsnow, snowbreeze,ireb (custom ispw and fetching thing)...
now my ipod is in dead case, it just gives apple logo and wont start.
Method 3: TS 3.0 and 1.0 checked, certificate xyz... uncheked from intertnet explorer-> internet option -> advanced -> security
Method 4: netsh xyz (comand) in cmd...
Please Help thank you.
"Details:
ipod touch 4g
ios 6.1 installed (lastly)
jail broken but deleted cydia from it
then tried to restore it always gave Error 3194,
then restored it from its backup file after that it didnt opened or just showed apple logo thats it."
my itunes on dignostic gives this report,
Microsoft Windows 7 Business Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP xw4400 Workstation
iTunes 11.1.1.11
QuickTime not available
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 001AB71808E6CBD8
Current user is not an administrator.
The current local date and time is 2013-11-29 04:19:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 8400
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.1.11 is currently running.
iTunesHelper 11.1.1.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {BC8F9388-D244-4F12-92A3-A26318EE6C52}
Description: Broadcom NetXtreme Gigabit Ethernet
IP Address: 192.168.1.102
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Fri Nov 29 04:16:55 2013
Lease Expires: Fri Nov 29 06:16:55 2013
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-11-29 04:18:45.lllaass thank u bro, but none worked for me
i have tried all these methods n above which i mentioned before....
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
in the end i went ot market n paid him 1.94$ and he restored it to 6.1.5... and said apple has closed other ios updation except 6.1.5 ...but still thank u soo much learned some new stuff from u... -
My ipod shows the apple logo but wont fully turn on!!
I restored all the factory setting and then my ipod turned of. I then lete it sit for a month and just recently charged it and connected it to the computer. If i hold the power button the Apple logo apears for about 15 seconds and then the screen goes black again. If i plug it into my computer the logo appears and shuts off but it doesnt open up on itunes. How do i get my ipod to turn on?
What happens if you try and connect it to your iTunes in recovery mode and restore it to factory settings? See this article for instructions on getting your iPod into recovery mode. Make sure not to restore from a backup.
http://support.apple.com/kb/ht1808
B-rock -
Got grey screen and Apple Logo but wont start up
Out of the blue; my 2008 (1.8Mhz) Mac mini wont boot up and it just stop after showing a grey screen with white Apple logo on it.
I insert the DVD and ran Apple hardware Testing; strangly the machine passed all the hardware test. I did changed the logic board battery but still no luck! Can anyone help me to resolve this issue please?Mac OS X: Gray screen appears during startup
-
My iphone 4s keeps flashing the apple logo but wont turn on...
I've tried pressing the home button and hold key to restart it, ive tried to plug it in to my mac and restart it but it wont even recognise that its connected...
Just the apple logo flashes and sometimes fades out with a green or blue line through it... What is going on somebody please help me
This is seriously the 4th iphone i've received this year my first one lasted me 2 years!!Do a recovery mode
http://support.apple.com/kb/HT1808 -
Need help. My daughter decided to do a factory reset on her 3g and now it wont turn on past apple logo. Also wont reset or reboot. Any ideas
Hi hullcity1966,
Thanks for visiting Apple Support Communities.
See this article for steps that may help with restoring the iPhone:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
All the best,
Jeremy -
my ipod touch wont turn on ive tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.
Try:
- Another cable
- Another USB port
- Reboot the computer
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my iPad 3 showing the apple logo, but won't reboot, tried few time hold sleep/home button but still wont work, what can i do
Read
http://support.apple.com/kb/ht1808 -
I was trying to do an update on my Ipad2 and it looked like it was getting ready to load, but then I received an error message. Now my ipad is not working at all. The only thing that appears on the screen is the apple logo and a loading bar. I tried to turn it off, but it just wont do anything. Help!
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
my iphone is detected in itunes as normal, but screen on the phone only shows apple logo??? restored and everything but no difference its weird, it restores successfully and stuff but once done the screen only shows apple logo.. note:while restoring everything goes through as normal on the phone it shows the bar loading etc.. but once complete just stays on apple logo.
It can take a few minutes to reinitialize, but if it stays on the Apple logo for as much as 10 minutes there is something seriously wrong. Try restoring again, and set up as a new phone rather than installing your backup. If this fixes it you have a corrupt backup. If this doesn't fix it the phone is broken. Or possibly jailbroken.
-
I have a MacBook (Late 2008 edition) having Mac OS X 10.6.8 SnowLeopard OS installed (2 X 512GB RAM, 160 HDD). I copied some mp3 into iTunes library and soon the process got stucked. MacBook was not accepting any command/it seemed to got hanged. Carelessly, I switched the MacBook OFF by pressing the Power button. Now, when it began to boot again, all I hear was some clicking sound from the MacBook (seems HardDrive failure because the sounds seems to be from HardDrive). After few seconds, It showed flashing folder with question mark and it wont go beyond that.
Steps I tried:
1. Resetting NVRAM, PVRAM and SMC.
2. Booting in safe mode.
3. To boot from install DVD (Mac OS X 10.6.3 SnowLeopard).
4. Holding down 'option' button while booting. It shows the "Mac OS X Install DVD" icon but as I click it and press return, it again shows Apple logo with spinning wheel and little later it shows prohibitory sign with spinning wheel. This will now remain for ever and ever.
5. I bought a new 500 GB HardDrive and replaced the old one with this. Now trying to boot with DVD (Mac OS X 10.6.3 SnowLeopard) it again hows Apple logo with spinning wheel and little later it shows prohibitory sign with spinning wheel. This will remain for ever.
Any suggestions to overcome this problem will be highly appreciated and I'll be very grateful for all your help.
Thanking You.Hi julenawang,
Welcome to Apple Support Communities.
It sounds like your MacBook has a startup issue and you aren't able to reinstall Mac OS X on a new hard disk. The article linked below has a lot of great information and suggestions that will resolve most issues like the one you described.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
I hope this helps.
-Jason -
imac wont boot - i get a white screen with apple logo, and it loads to about 10%, then screen goes black
Hey there mtriest,
It sounds like you are unable to boot the iMac successfully as it keeps shutting down when you try to boot. I suggest the troubleshooting from the following article named:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Disconnect, test peripheral devices and network cables
Note: "Peripheral devices" refers to external devices other than what came with your Mac, such as hard drives, printers, or hubs that you connect via a USB or FireWire cable.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Disconnect all peripheral devices such as external hard drives or printers (leave only the display, a keyboard, and mouse connected).
Disconnect any Ethernet cables.
Start up your Mac.
If you can start up this way, one or more of your peripheral devices (or installed software related to the device) is probably causing the gray screen issue. Connect one device, then restart your Mac to test for the issue. Repeat the process until you locate the device at issue. Make sure the device is powered if it needs to be to operate correctly. Check with the manufacturer of the device for support or possible software driver or firmware updates that may be available for the device. Try a different cable with the device if possible (such as a different USB or FireWire cable).
Note: If you have multiple peripheral devices and the issue only occurs when they are all connected, but not when each device is the only peripheral connected, see the Additional Information section below.
If you are using a desktop Mac with a third-party keyboard and/or mouse device, and the issue still occurs, try starting up with an Apple keyboard and mouse connected instead. Try starting with no keyboard and mouse connected, then connect them after start up. Also, try a different USB port on your Mac.
If the gray screen issue persists with no devices connected, go to the next section (with the peripherals still disconnected).
Perform a Safe BootSimply performing a Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
If your Mac starts up as expected, immediately try restarting.
If the Safe Boot does not work, or the restart after a successful Safe Boot does not work, go to the next section.
There is additional information in the article with further troubleshooting if needed.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
i've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?
Look at this support article:
http://support.apple.com/kb/ts2570
Ciao.
Maybe you are looking for
-
Multiple iPod Touchs with Facetime linked to a single Apple ID
I have Multiple iPod Touchs (7 to be exact) with Facetime linked to a single Apple ID using different email addresses but all connected to the same WiFi network. Problem is that when I try to call one from another, multiples ring. I can call my iPhon
-
HT201769 how do you open a photo database file?
how do you open a photo database file?
-
Images go black once web page has loaded
I use my blackberry to look at the BBC weather pages. When the page loads the images load and can be seen but once the page has finished loading all of the images go black. Any ideas. This is the page http://news.bbc.co.uk/weather/mobile/forecast/213
-
Script to start an app in /usr/local/bin
I am new to trying AppleScript. I use gnupg and want to start an app called "gpg-agent" located in /usr/local/bin/ . I want to pass it an arg, something like --daemon and maybe another ... first I want to see if it is even running ... But when I comp
-
Skype 7.0.0.102 version not working on Windows 7
We all use Skype in the office for sending instant messages to each other. One of my colleagues which uses Windows 7 has an issue with Skype where it has stopped working, I have checked the error log and it is showing this: Description:Faulting appl