3g tab on 'network' screen of iPhone 4S

Hi -
As in iPhone 4 model, I donot see any 3G tab under the 'Network' screen on iPhone 4S. Currently I can only see following tabs:
Cellular Data
Data Roaming
Is that due to change in the model?

They changed that for the 4GS, it might come back in the next iOS update.

Similar Messages

HT201699 My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?

My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?

Yes ATT hides the APN settings so when you try to use a st sim it automatically reads on AT&T network so the APN settings are hidden and cannot be accessed however you can go to apn.straighttalk.com on you'r phone and select APN/data settings then select AT&T then iPhone and a screen will pop up asking if you would like to install the profile for whatever reason it's not verified but works fine. You can also go to www.unlockit.co.nz and set up a straight talk APN profile that is verified not sure exactly what that means but both work to get the data working on the phone for straight talk but it does not make the MMS work. There are a couple other methods I have read about one is on howardforums using ibackupbot to manually change the files on the phone I haven't been able to get mine to stick using that method but other people have and there is a sim swap method to trick the phone to reveal APN settings using a tmobile sim I have not tried this but other people have with success. The last two methods mentioned will make both data and MMS work

I want to enter the password for a secure WIFI network on several iphones. If I do this, can the end users somehow extract the ip address and password for the wifi network from the iphone and use it from a pc (at home, for example)?

I want to enter the password for a secured wifi network on several iphones. If I do this, is it possible for the end users to somehow extract the ip address and password information and use it from a pc/laptop/other mobile device. For security reasons, I don't want them to be able to to this.
Please advise,
Thanks.

If you look at the top left of your screen you will either see a 3G (or 4G if you have AT&T) or you will see the wi-fi symbol. If you don't see the wi-fi symbol you are connecting to Gmail through your cellular data plan, not via wi-fi.
To answer your question, it doesn't happen often but when it does the steps I mentioned above will normally resolve it. Hopefully you won't have any further problem with this.

What is 'Sharing' Tab in Network?

Hey everyone,
I've noticed that in the new Leopard OSX there's a tab under Network that is entitled 'Sharing'. When I look at network in finder there's four things listed on the left.. devices, shared, places, search for.
Under 'shared' theres a whole list of little pc screens with various names next to them. What is this?
Does anyone know? Does this mean someone else can see what I'm doing on my PC?
Thanks

Those little icons refer to all of the other systems on your network that you can access because they have sharing of some type enabled. Whether they can see you or not depends on whether you have shared things on your computer

Tried to use iphone connecting to wifi but failed dispite password correct, cable connection ok, and even reset network setting in iphone. Anyone can help? KC

Tried to use iphone connecting to wifi but failed dispite password correct, cable connection ok, and even reset network setting in iphone. Anyone can help?
Kin Chi

I get in now with the following procedures taken:
1. Reset network as suggested in Apple app.
2. In the wifi connection, instead click in the user name as shown in the screen, I click Others and re-type the user name as appeared before. In the security, instead of none, I click WEP. It will then prompt you to put in password. I then put in password as I know for that user name again.
Then, it joined the wifi..
Hope this can help someone who get this problem.
Kin Chi

CJ20N, add button to run report from network screen

Hi,
I've got requirement to run raport from CJ20N on user's action from network screen.
I don't know is it possible to add a button in this transaction on network level.
Do you know how to run a new raport?
Thanks for any ideas.
Regards,
Kaz

I think you may need to implement enhancement 'CNEX0007'
CMOD==> Enhancement==> Componet==> Get the Screen area.
Go to SE41 ==> Give the Screen program and number==> add your WBS tab there. The values will be available to screen
link given below which shows step by step proc with snapshots.
http://www.sapdevelopment.co.uk/enhance/fexits.htm
<b>Reward points</b>
Regards

How to display a specific tab in a screen after a popup message

Hi all,
        I've a rewuirement where in i need to display a secific tab in a screen after popping up a warning message. To be specific, when i choose 'Yes' in the popup window, it shoud take me to a tab which is not active while displaying the warning popup.
Thanks in advance....
Anil Kumar Japa

Hi
U need to active the tab you want to show:
So you should set the ok_code (of the tab) value to field ACTIVETAB
<TABSTRIP>-activetab = <OK_CODE>.
And transfer the value of subscreen number to the subscreen area:
CALL SUBSCREEN SUBSCREEN1
             INCLUDING G_CTRL_TABSTRIP-PROG
                       G_CTRL_TABSTRIP-SUBSCREEN.
Max

I am located in india, using reliance gsm network on my iphone 4, however i was unable to activate facetime on my iphone 4. please help

i am located in india, using reliance gsm network on my iphone 4, however i was unable to activate facetime on my iphone 4. please help

Is reliance a supported carrier for the iPhone? If not, you will be unable to get facetime to activate.

How do you lock the screen on iphone 4?

How do you lock the screen on iphone 4 while on a call? I mute calls, activate face time and I have even called someone by accident during a call. I know there has to be a way to fix this. Please HELP!

It locks automatically when you hold it to your head.
If it fails to do this, then remove the case and see if it solves it.
If it does not, then do the basics - restart, reset, restore.
If that does not solve it, then make an appointment at the genius bar.

WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" GETS OPENED.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECCT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT

WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" APPEARS.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT???

Please don't shout! Using all uppercase means shouting on the internet. If your keyboard is stuck please say so, otherwise people will think you are being obnoxious.
Now the first question is, when you are saying connecting to personal hotspot, have you always been using the iPhone to connect to the internet? Are you someplace where the only place to connect is available via tethering to the iPhone's celluar network? Or do you have other options?

Is there a way to set wireless network priority on iphone? If not, there should be!

Is there a way to set wireless network priority on iphone? If not, there should be! I have a wireless router with dual band signals, as well as an extender at the other end of my home... it would be nice if I could set a priority list so my phone knows to always connect to the 5GHz signal if available, rather than trying to connect to the 2.4GHz signal which is on the other side of the house...

By default, the iPhone will prioritize Wi-Fi over cellular for data and when doing Wi-Fi, will latch on to the strongest signal it can associate (latch on) to. But all that is automatic, there's no evident control for manual adjustments. Other than deleting the Wi-Fi networks you don't like.

Screen error while adding table control to existing tab in BP screen

Hi experts,
Requirement: Add new section with table control in existing tab in BP screen. Purpose of creating table control is to add or delete multiple entries etc.
To fill this requirement, we have created custom transaction with table control facility. When we run this transaction from SAP easy screen, we are able to add, delete and create multiple records to database.
We have configured this custom program and screen in BDT (views) and saved.
When we call BP transaction we are getting following error message.
"Screen ZMOD_TEST1 0100 must be an Include screen (screen error)".
We are not sure, the approach we have chosen is correct. Incase, any one of you come across this type of problem, please guide us to rectify.
Thanks in advance.
Venky

Venky,
If you are on CRM 4.0 or even 5.0, my approach to adding a table to business partner attributes would have been the following:
- Use EEWB to generate the table extension
- Modify the generated code/screens if what was generated did not meet you complete requirements
However going back to your original question, if you add new screens for the BDT, then they must be "subscreens". The screens you create for the BDT tool are always subscreens placed in a container by the BDT program.
So your options are one:
1. Convert your screen to a subscreen and if you have coded all the BDT event function modules correctly it should work
2. Use EEWB to generate a new extension and make adjustments as necessary.
Good luck,
Stephen

I just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

i just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

Maybe. What kind of other computer are you talking about? What operating system is it running? What kind of wireless router are you using?
Your best bet may be to just reset the router and set it up again.
Just so you know, WEP is a very old security system for wireless and is considered insecure. If you have it available, use WPA2.

I accidentally deleted the iCloud Tabs in Safari on my iPhone...How do I get it back??

So I accidentally deleted the iCloud Tabs in Safari on my iPhone. Is there a way to get it back so I can view what tabs are open on my Macbook?

Quit Safai (double tap the home button, hold the app icon until it wiggles, tap , double tap the home button gain)
Settings > iCloud > Turn off Safari > Delete from phone then turn Safari back on

No cursor in address bar after opening a new tab on full screen mode

Hello all!
When opening a new tab in full screen mode, I noticed that the cursor dissappears from the address bar. Since I cannot write the address without clicking the bar, I think this is a very annoying issue...
Does anyone have the same problem?
Thank you.

Try resetting Safari. From the menu bar click Safari / Reset Safari. Select the top 7 buttons, click Reset.

3g tab on 'network' screen of iPhone 4S

Similar Messages

Maybe you are looking for