3G works but calls and messeges doesn't

Hi. I bought my iPhone 5 from my friend. The 3G data works but I can't call or send messeges, not even receive those. The network of my provider is shown, yet I dont have any connection bars.

Then contact your cell phone provider to resolve the issue, both of those are carrier features.

Similar Messages

  • [SOLVED] Wireless card works, but configuration and software doesn't

    Hi,
    I could manage to activate my Atheros wireless card using the madwifi drivers. I wanted to use knetworkmanager, but unfortunatly i doesn't recognize any of my network devices. I've read the other networkmanager threads, changed the daemons order, disabled the network daemon and the routing entry in rc.conf, but still (k)networkmanager doesn't know anything about my devices.
    I tried to use knetworkmanager-svn from the AUR. Initially it doesn't work because the SVN URLs inside the PKGBUILD script a wrong, but even after I fixed them I couldn't compile the source, because there is no configure and no Makefile in the svn head. I'm really a noob when it comes to the linux build system, so I had to give it up.
    Now I use wifi-radar. It is terribly slow to connect, but it works. However, when I disconnect with wifi-radar, then do 'ifconfig ath0 down && ifconfig eth0 up' the DNS requests fail. I checked /etc/resolv.conf and the default route (set to eth0), but they are right; the interface just doesn't use the name servers. The only way to get it working is to restart the laptop. How does Linux chose a "default interface"?
    I'm not afraid of editing text files, but I'd like change networks fast and easy. I don't want to spend hours to adapt to a new access point... I'm really looking forward to the new wlan stack; maybe things will be getting easier then.
    kei
    Last edited by Kei (2007-05-04 12:36:00)

    Okay, now KNetworkManager works (I forgot adding my user to the HAL group :] ).
    There is still a problem - I know it's networkmanager related: At home I'm not using a DHCP server. KNetworkManager cannot handle static IP configuration. However, if I issue the command 'ifconfig ath0 192.168.0.12 subnet 255.255.255.0' while KNetworkManager is searching for a DHCP server I can even ping my gateway, so there is definitely a connection. Unfortunatly KNetworkManager closes this connections after a short period (dhcp timeout). Is there a quick'n'dirty workaround for this issue?
    Another problem with KNetworkManager: When switching back to wired network, the DNS server is there :-) but the default gateway is not
    Thanks for suggestions..
    kei
    //EDIT: In Debian there is a configuration file called /etc/network/interfaces. KNetworkManager uses the static IP information I enter there. However, when I modify /etc/rc.conf accordingly in ArchLinux, KNetworkManager does NOT use it.
    //EDIT 2: After '/etc/rc.d/networkmanager restart' the static IP setting from /etc/rc.conf are used. The problem with the default gateway only occurs when the connection to one of the networks FAILS. After that failure the configuration is kind of messed up.
    Altough it seems more like a dirty hack than a definite solution, I'm quite happy with the way it works now.
    [CLOSED] <-- maybe I'm blind, but how can I change the topic to "[SOLVED] $Topic" ?
    Last edited by Kei (2007-05-03 23:26:04)

  • Java works, but jar and javac don't

    java at the command line works, but jar and javac don't
    could it be the CLASSPATH
    I'm running Windows if that helps. If you need more info ask away
    Thanks
    CINC

    Definitely sounds like the classpath problem. From the sounds of the error message, you are using win95/98/ME, and so the best way to get around this is to set the classpath in your autoexec.bat file. I think the problem is because you have to set 2 variables in your path, one for the running of the java (JRE) and one for the tools to process the uncompiled files (SDK);
    rightclick on your autoexec.bat and select Edit
    here is my path, change yours accordingly so the paths lead to your windows, command and bin directories accordingly.
    PATH=D:\WINDOWS;D:\WINDOWS\COMMAND;D:\PROGRAM FILES\JAVASOFT\J2SDK1.4\BIN
    SET CLASSPATH=.;D:\PROGRAM FILES\JAVASOFT\J2SDK1.4\BIN\TOOLS.JAR
    Theres a section on setting classpath in This site at :
    java.sun.com/j2se/1.3/docs/tooldocs/win32/classpath.html
    and if that doesn't work, then i recommend you download and IDE which sorts ou most of these problems for you, and makes programming much easier also :)
    anything from:
    Suns Forte
    Jcreator
    Jbuilder
    to a real heavyweight which i use and find indispensible called Visual Age for Java, which is so powerful, but not for the faint hearted or weak-computered. :P
    Good Luck
    Benji

  • Call and messeging facility available as phone on ipad mini

    can i use ipad mini for phone call and messeging as iphone cause i wanna to purchase it now
    please tell me

    Prabhuram wrote:
    But why is it so , when we have a sim card with phone no on it , why apple has made such a worst decision ?
    I belive if apple have to compete with all android devices over there it has to atleast think of this feature (not external SD ) for the sake of getting huge customers.
    Only Apple would know why they have made that particular decision and they have not said. It doesn't seem to be hurting their quest for "getting huge customers".

  • Why can't I get my printer to print out a playlist from i-tunes? It used to work but now my printer doesn't seem to receive the "print" command.

    Why can't I get my printer to print out a playlist from i-tunes? It used to work, but now the printer doesn't seem to recognize the "print" command coming from i-tunes. The printer works for other applications!

    I  finally solved this problem after toiling with it for a couple of  days.  Solution:  Once you have  burned your CD you must go back into  iTunes to your music/playlists and select the playlist you just burned  and click file; print and you will  get the mosaics that we have been  accustomed to.  I was on hold with  Apple Support when I found this  myself.  Yes......!!! Problem solved..for me anyway.  Good luck!
    Scott

  • Is it possible to get iPhone audio (telephone calls) from Lightning connection? Music works, but calls switch to internal or extenral speakers, not lightning (for e.g. docking station, car...)!

    Is it possible to get iPhone audio (telephone calls) from Lightning connection? Music works, but calls switch to internal or extenral speakers, not lightning (for e.g. docking station, car...)!
    I want to get the audio out of the lightning connection (the way you get audio when you connect it to a dock). It works properly with music, but when making a telephone call, it switches to the internal speraker. You can change to the external spekers, but you cannot select another audio out. It's also possible to get the telephone audio from the analogue connection, but that's not what I want. I want telephone audio from lightning...
    Would be so great if anybody has an idea

    I must also say that the second update ruined my Lumia's battery life.
    With the first (out-of-the-box) update the phone usually had 30 percent of battery after a quite hard day (e.g. more than an hour of talking via bluetooth handsfree, more than two hours of listening to the music via bluetooth, more than an hour of browsing via wifi, and reading hundreds of e-mails via two mail accounts). I never managed to discharge it after one day (e.g. 14-16 hours) of continous use, no matter how much I talked, listened and browsed.
    Now, with the secod update, it discharges to 20% after 12 hours of laying still almost without use (30 mins of music, less than 15 mins of talking and nothing more), and discharges completely with the usage pattern described above.
    Did the second update contain some Android code?

  • Internet sharing works but the DNS part doesn't

    I'm posting this message because I believe it is a bit different from other 'Lion internet sharing' posts in terms of the source of sharing and also the results I get.
    Similar to other users experiencing the same problem, my internet sharing setup stopped working as expected after upgrading to Lion. However, I can't say it stopped working completely. It still does work but the DNS part doesn't. This means I can still perform pings, ssh and socket connections from computers using the shared connection. But I cannot browse the internet because web site names can't be resolved.
    For example, my MacPro has two Ethernet interfaces. On one of them (en0) I vpn when connecting to work using a VPN service I created via System Preferences => Network. I used to share that VPN connection to computers using the 2nd one (en1). The other computers are linked to (en1) through a multiport hub. This setup used to work flawlessly in Snow Leopard and multiple users could use the shared vpn internet connection.
    After the upgrade to Lion I can still see other computers on the local network and also ping any external internet site. I can even use Safari and navigate my ISP's home page using its IP address only. However, DNS doesn't work and internet domains cannot be resolved by name so internet browsing is not possible.
    Furthermore, when I don't VPN to work but simply share the connection to the internet from (en0) to computers using (en1) everything works as it used to in Snow Leopard. The difference here is that the same DNS servers are used by both network services.
    So far I'm stuck with these findings and I don't know where else to look for answers. Any input or feedback is greatly appreciated.

    I've to admit that i don't even know what VPN means.. but..
    I have an 27" iMac (mid 2010), a iPhone 4 and a Macbook Pro 13" (mid 2009) .. and i used to share my ethernet connection to wi-fi on Snow Leopard. Since i upgraded to Lion (i'm using it since the first DP, and i think the internet sharing was working under the 1st DP .. i'm not pretty sure), it just doesn't work.
    Just like solongpc, it does activate the internet sharing, my other devices can see and connect but neither of then (my iMac - host or my mbp and iphone) can navigate on the internet. And when i turn off my internet sharing (on my iMac), it still not acessing any website.. and i've to restart my moden.

  • I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

    I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

    Hi Hardy Tasso,
    Are you seeing this problem since first launch of PSE13 after installation or recently?
    Please try:
    Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
    Thanks,
    Anwesha

  • Updated to the new iOS 6.1.2 and now my 4S wont work for calls and texts

    updated to the new iOS 6.1.2 and now my 4S wont work for calls and texts

    I called Vodafone corporate help desk as I have a company phone :-
    I was told to hold down the off button at the top of the handset at the same time as holding down the round menu button at the bottom of the handset for 20 seconds - the phone went off, then restarted and it all seems OK now.
    Def something with the ios 6.1.2 upgrade :-((

  • Just got a new iPad 2.  64 GB.  It will connect to wifi and facetime works, but email and internet won't connect.  Suggestions?  Thanks!

    Just got a new iPad 2.  It is 64 GB.  It will connect to wifi no problem and facetime works, but email and internet won't connect.
    Suggestions?
    Thanks!

    If facetime works, then the internet IS connecting.

  • IPhone 4 calls and messages doesn't work

    Hi,
    I bought  an IPhone 4 to months ago and it has been working fine untill three days ago. Now I can't make a call from it, when I try, it doesn't ring in the other end and I can't finish the call again. Wien somebody calls me, it doesn't ring.
    Texting is not possible to other IPhones BUT I Can text to other cellphones like Sony Ericsson.
    I have restarted (Worked for a day, now it's off again) several times.
    I have had another SIM card, no help.
    Turned on and off several things like cellular data, 3G, roaming...
    Resetting here, there abd everywhere....
    Does any of you know a way to Solveig this???

    I finally did the 'reset' which seems to solve the problem. My phone has been working for a couple of hours by now.
    Settings>general>reset> reset all settings ( the top button on my phone, its in Danish)
    I had to redo a few things, but all aps, contacts etc. are still here.
    I hope it will keep on running from now on!!!
    MotterB

  • Iphone 6 (Verizon,64GB,space gray)  microphone works for text dictation and Siri but stopped working for calls and voice memos.

    My iphone 6 the micorphone has stoppped working unless I speak loudly right into it and its still not clear during calls and voice memos. But it works just fine for Siri and text dictation. I use the earbuds for work so not sure how long its been going on. Only change is I updated to iOS 8.1.3. Not sure if I should exchange my phone or if its a software glitch since the same mic seems to work for some things and not others. Any ideas would be apreciated.
    iPhone 6
    Space Gray
    64GB
    Verizon

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
    If this does not help, setting it up as new device would be the next step:
    How to erase your iOS device and then set it up as a new device or restore it from backups

  • I have an iPad 2 and external speakers work, but JACK for headset doesn't produce sound. If I wiggle, twist or adjust it, the earphones make a crackly and very low grade sound. Ideas?

    No aud. or sound when using wired headphones. If I constantly play with input jack it will produce a low sound or a regular sound but it's not of any quality worth listening. I have owned this iPad for over three years. It was purchased new.
    Happenings since 2013:
    Broke screen due to fall on floor 9-2013
    Screen replaced by techs on 10-2013
    Upon getting back iPad after being repaired discovered no WiFi on 11-2013
    Sent back to techs to repair issues with WiFi on 11-2013
    Received unit back on 12-21-13. I only checked WiFi. Unit remained unused for a few weeks.
    Used unit during Xmas season on average 12 hours a day but have not yet discovered or even tried a pair of headsets until after Xmas.
    Does work on screen and internal wifi antenna effect output sound on headphones?
    Can this be easily repaired, possibly without taking off the cover? Does it have an update conflict? Is is a Settings issue?
    Please help with any ideas or suggestions.

    Hello,
    Try wiping the iPad and then starting again. (Don't forget to back up first!)
    I had that problem it was software.

  • It works....and it doesn't....it works...and it doesn't...what's going!?

    I am currently on my 3rd replacement Express. The first one I purchased worked well for a few days, then stopped syncing up with the cable modem. All features of the Express worked save the internet connection. To resolve this issue, the Exress had to be reset (shut off then and turn back on) along with the cable modem. After reseting, Express would allow internet use for 5-10 mintues. Anyway, I called Apple, they told me it was the modem... we had the cable people come and test the cable modem... the modem works. Called Apple back, they sent a new one.
    The new one (#2) worked for about 1 week, then the same thing started to happen. I called Apple about it and they told me it was interference from other wireless appliances (cordless phone, etc). Well, we shut off our phone and all other electronics they listed as causing interference. Still the same problem as with the first. I called Apple back and they wouldn't do anything about... "Sorry, it is not our product" was essentially the reponse I got. Well, it stopped putting out any signal at all. I tried it in other locations to check for signal interference.... No signal at all. I called my local Apple retailer, they told to bring it in and they would check it... Yup. "It doesn't work," they said.
    Now I am on my 3rd. It has worked superbly for the past 2 or so months (no problems staying connected to the internet), but is now starting to show some of the same symptoms meaning all features work (printing, airtunes) but connection to the internet is lost. Again, turing it off and back on along with the modem helps out for a while, but the internet connection is eventually dropped, though currently only after 30 min - 1 hour. I am worried this one will stop working like the others especially now that my warranty is nearly over.
    Does anyone know what is going on? Any suggestions?

    I'm glad I'm not the only one! Finally someone who understands! Apple has been less than sympatheticwith this issue... By the 3rd replacement they didn't want to take responsibility and came up with more and more reasons for it not working like "cement and bricks cause interference."
    Anyway, we have used up to 3 machines (iMac, 2 Power Books) - when one looses connection, the others do too at the exact same time. You can hear sychronized groans through out the house!
    What type of internet connection do you have? We are on Comcast cable - I am pretty sure it's not them or the modem because the modem works for weeks without problems when directly connected to the iMac/Power Book. But just thought I would ask.

  • Web Gallery didn't work on CS4 and still Doesn't Work on CS5??? WTF

    Can somebody please help us with this big issue.
    Web Gallery didn't work on CS4 and we gave up, got Capture one, but now we upgrade it to CS5 and still DOESN'T WORK??? How this people never fixed that issue? can you please get real????
    Thanks
    Pablo

    Pablo,
    As Jocheim points out, this is not the place to get help. My guess is that you need Photoshop Just choose the appropriate sub-forum.
    Also, this ARTICLE might be very useful at gathering the types of info, that will help others help you. Note: much relates to Adobe Premiere, so you can skip over those parts, but you should get the general idea.
    Good luck,
    Hunt

Maybe you are looking for