3GB used in a day?
Hey, just wanted to ask something, or try and figure out how this happened.
I know I'm getting near my usage for the month, well I had 9.2GB after Thursday 26th and yesterday (Friday 27) I was trying not to use much in order to have some usage left on the final day to finish a download.
Anyway, I hardly used my internet yesterday. I watched maybe two videos at 360p that were about 6 minutes long and used a website that hardly had anything of detail on it (no streaming, few pictures etc) so I figured by my status on my wifi that I had used 1,000,000,000 at the end of the day which is 1GB? So I was expecting to see 8GB left for the month when I checked this morning. I had 6GB! I have no idea where this 2GB has gone, I had no downloads including no pc updates that could have used that much and as far as I know, no one had got acccess to my router (I'm the only one who knows my security code and it's not easy to guess)
Is it possible something/someone has got onto my internet or what? I definitetly didn't use 3GB in one day!
Miss_Spuggz wrote:
The PC would have been used between 11am and 6pm and most of what I was doing was offline apart from what I stated. I made sure all programs like Steam and Last.fm were closed so they weren't using anything. I didn't stream music from the internet or use skype but checked facebook but for no more than 10 minutes.
And I'm hoping you know what I mean but you can check the status by right clicking the connection and selecting the status you can see your usage. I had disconnected or signed off my computer so it didn't reset at any time and the total of both the sent and recieved data came to around about 1GB.
I've used my internet before where I did a lot of video watching/searching etc and that didn't come to anywhere near 3GB so I don't have a clue where it was been used.
As I said, any program that could have used the slightest amount was closed when I got onto the PC.
I changed my encryption code anyway just to play safe.
Oh and I always check the date when I check as I noticed before that odd times it fails to update for the previous day and it was all correct. I did have an issue with the usage not being selectable one day this month but someone here provided me the direct link to it and all seemed good so I don't think that they failed to update a previous usage and just added it on.
Hi again. As Keith said, Steam is a p2p application and will also ne used as uploads as well as downloads.
I'm afraid that the wireless status you've been using is frankly not really of any use as a usage guide. It will reset if the computer is in standby, it will also show wireless activity that is not necessarily internet usage.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures
Similar Messages
-
ICloud email says 4.3Gb used even after i deleted all my emails
I´ve been using iCloud email for some time so i managed to use 4.3gb of storage. I have deleted all my emails, emptied the trash, checked all the folders, spam, sent, inbox, folders, etc. There are 0 emails in my icloud email account. But i still get 4.3Gb used in my iPhone and iPad. It has been at least a month since i deleted all my emails and i still get 4.3Gb used in mail.
I´ve also uploaded a Gmail backup into my iCloud account to make sure i use more than 4.3Gb of space to see if it changed. Im now using 6.8Gb in my iCloud email but still get the 4.3Gb used.
Any thoughts?If you deleted them they would have been moved to the trash, which by default is not deleted for 30 days. If you want to delete the emails from the trash right away, go to icloud.com on your computer, log into your iCloud account, click on Mail, click on the Actios (gear shaped) icon on the upper right, then select Empty Trash.
-
I have set up Iphone4s with my pc and ticked only required songs to sync. I clicked apply and it has been going for over 12 hours on my Iphone just displayimg loading. The capacity on my iphone shows a capacity of 6.3gb used out of 13.6 Am i doing something wrong ?
Thanks for the replies. It took a while not hearing anything so thought I was alone. I have done many of the suggestions already. The key here is that it occurs on both phones with apps, and phones still packaged in a box.
A Genius Bar supervisor also checked his Verizon data usage log and found the same 6 hour incremental use. Suprisingly, he did not express much intrigue over that. Maybe he did, but did not show it.
I think the 6 hour incremental usage is the main issue here. I spoke with Verizon (again) and they confirmed that all they do is log exactly when the phone connected to the tower and used data. The time it records is when the usage started. I also found out that the time recorded is GMT.
What is using data, unsolicited, every 6 hours?
Why does it change?
Why does it only happen on the iPhone 5 series and not the 4?
Since no one from Apple seems to be chiming in on this, and I have not received the promised calls from Apple tech support that the Genius Bar staff said I was suppose to receive, it is starting to feel like something is being swept under the rug.
I woke up the other day with another thought ... What application would use such large amounts of data? Well ... music, video, sound and pictures of course. Well ... what would someone set automatically that is of any use to them? hmmm ... video, pictures, sound. Is the iPhone 5 succeptible to snooping? Can an app be buried in the IOS that automatically turns on video and sound recording, and send it somewhere ... every 6 hours? Chilling. I noted that the smallest data usage is during the night when nothing is going on, then it peaks during the day. The Genius Bar tech and I looked at each other when I drew this sine wave graph on the log print outs during an appointment ... -
I have been using itunes all day and then it wanted me to install a newer version. When I did it said I can't because it's missing mdsvr80 or something so i downloaded that now it has another error. How do I get itunes back the way it was or to work?
See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562 -
I'm trying to calculate the number of days until your next birthday. Only using current month, day and birth month and day. I can get close but i'm way off. When i enter in the next day, the amount of days is supposed to be 364. This is where I am having problems. I know my code is way off. I just need some guidance please!
Attachments:
D5.7_1.vi 8 KBI just had a little fun with the Time Record...
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
D5.7_1_BD.png 19 KB -
I have CC for work and my PC to do work at home. At home I switched from PC to Mac this weekend. I want to redownload my apps for the iMac but it's telling my I'm using a 30 day free trial. I need to discontinue the PC apps and download to the new computer.
YOu need to sign out of the PC thru the CC manager and then sign in on the Mac.
-
Bridge will not now let me use camera raw, though I have been using it every day. It ways that "the parent application is not active. Bridge requires that a qualifiying product has been launched at least once to enable this feature." What am I to do?
Usually this points to having some kind of earlier trial version still installed on your system. However without more details you are not likely to find an answer. Try this for a start:
How To Get Help Quickly -
I have an email account causes the machine to hang up after being in use for a day. It only occurs on my Macbook Pro and only one particular account. The problem account works fine on my iMac and Windows Machines. I have been to the local Genius bar and through trial and error we have determined that Mail is working ok but somehow the account is causing the problem. I have used this account for years. Any ideas what is causing this?
No idea why, but one thing you may try if you have the time, is create a new user, and set up the problem mail account in the new user space. See if it causes your MBP to hang as well. That will tell you if it is something wrong with your main User, or something wrong with MBP.
Assuming this works, I'd nuke the problem account in your main user space, re-start, and reinititate the account and see if that helps.
Depening on how many email accounts you have setup, it may be necessary to nuke the whole Mail folder in your User/Library.... Hard way to get it to work, but just my idea. -
Which function is used for adding days to given month
which function is used for adding days to given month
Hi Jagrut,
Good ... Check out the following examples
<b>Get a date</b>
DATE_GET_WEEK Returns week for a date
WEEK_GET_FIRST_DAY Returns first day for a week
RP_LAST_DAY_OF_MONTHS Returns last day of month
FIRST_DAY_IN_PERIOD_GET Get first day of a period
LAST_DAY_IN_PERIOD_GET Get last day of a period
RP_LAST_DAY_OF_MONTHS Determine last day of month
<b>Date calculations</b>
DATE_COMPUTE_DAY Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
DATE_IN_FUTURE Calculate a date N days in the future.
RP_CALC_DATE_IN_INTERVAL Add days/months to a date
RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
MONTH_PLUS_DETERMINE Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
DATE_CREATE Calculates a date from the input parameters:
Example: DATE_CREATE
CALL FUNCTION 'DATE_CREATE'
EXPORTING
anzahl_jahre = 1
anzahl_monate = 2
anzahl_tage = 3
datum_ein = '20010101'
IMPORTING
datum_aus = l_new_date.
Result:
l_new_date = 20020304
Example: MONTH_PLUS_DETERMINE
data: new_date type d.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
months = -5 " Negative to subtract from old date, positive to add
olddate = sy-datum
IMPORTING
NEWDATE = new_date.
write: / new_date.
<b>Hollidays</b>
HOLIDAY_GET Provides a table of all the holidays based upon a Factory Calendar &/ Holiday Calendar.
HOLIDAY_CHECK_AND_GET_INFO Useful for determining whether or not a date is a holiday. Give the function a date, and a holiday calendar, and you can determine if the
date is a holiday by checking the parameter HOLIDAY_FOUND.
Example: HOLIDAY_CHECK_AND_GET_INFO
data: ld_date like scal-datum default sy-datum,
lc_holiday_cal_id like scal-hcalid default 'CA',
ltab_holiday_attributes like thol occurs 0 with header line,
lc_holiday_found like scal-indicator.
CALL FUNCTION 'HOLIDAY_CHECK_AND_GET_INFO'
EXPORTING
date = ld_date
holiday_calendar_id = lc_holiday_cal_id
WITH_HOLIDAY_ATTRIBUTES = 'X'
IMPORTING
HOLIDAY_FOUND = lc_holiday_found
tables
holiday_attributes = ltab_holiday_attributes
EXCEPTIONS
CALENDAR_BUFFER_NOT_LOADABLE = 1
DATE_AFTER_RANGE = 2
DATE_BEFORE_RANGE = 3
DATE_INVALID = 4
HOLIDAY_CALENDAR_ID_MISSING = 5
HOLIDAY_CALENDAR_NOT_FOUND = 6
OTHERS = 7.
if sy-subrc = 0 and
lc_holiday_found = 'X'.
write: / ld_date, 'is a holiday'.
else.
write: / ld_date, 'is not a holiday, or there was an error calling the function'.
endif.
Checking dates
DATE_CHECK_PLAUSIBILITY Check to see if a date is in a valid format for SAP. Works well when validating dates being passed in from other systems.
Converting dates
DATE_CONV_EXT_TO_INT Conversion of dates to SAP internal format e.g. '28.03.2000' -> 20000328 Can also be used to check if a date is valid ( sy-subrc <> 0 )
Function to return literal for month
he table you want to use is T247. You can also use the function MONTH_NAMES_GET.
You can also try table T015M. It has the month number in it's key.
Formatting
DATUMSAUFBEREITUNG Format date as the user settings
Other
MONTH_NAMES_GET It returns all the month and names in repective language.
Good Luck and thanks
AK -
Can I use Oracle Developer Day.ova for learning purposes without any license? #developerday
Hi,
I am a student and learning oracle database. I have found Oracle Virtual box appliance from following link Developer Day - Hands-on Database Application Development</title><meta name="Title" content="Dev…
Do I need a license to use this VM?
Please reply.
Thanks,
Tahir.Kunwar wrote:
Hi friends,
i have installed oracle db using Oracle Developer Day.ova for practicing on my lappie.
I want to connect to that DB which is inside oracle vm virtual box manager using PUTTY ( which is on my desktop). I dont want to use the in-built workspace or Terminal(whatever is its name).
Can you guys please suggest what should i do so that i can login to the DB using the PUTTY only (i love it )? i am not able to login to the host "localhost" using the putty.
Few years back when i had installed vmware(linux installed in it and db installed on linux) i could connect through putty.
I am using below entry in the hosts file.
# localhost name resolution is handled within DNS itself.
127.0.0.1 localhost
# ::1 localhost
'localhost' and its ip address of 127.0.0.1 are non-routeable. Any request to send a network message to localhost will never leave the machine from which the request originates. And for all intents and purposes, your virtual machine is a different machine.
See my solution at
http://edstevensdba.wordpress.com/2012/12/15/configure-the-virtualbox-network-2/ -
Want to cancel iCloud plan but I can't because I still have 3GB used. How to solve this guys ?
Is the 3GB used a part of the 5BG you get for free? If so, you can delete the 3GB if you want to by going to:
Settings>iCloud>Storage & Backup>Manage Storage> Under backups, click on the name of your iPhone then delete backup. Do the same thing on anything else that is showing as stored.
Once you've done all of that you can delete the account if you want or you can skip all those steps and just delete the account.
Settings>iCloud>Delete Account -
I had 85gb data used in one day. How is that possible
Good afternoon,Yes, it surely sounds extremely high.Do you leave your modem on?Do you have your wireless password protected?Are you sure that no else in your premises is using it?Do you have several devices simultaneously connected?But 85 gigs is amazing, I agree..... I believe that there may have been some data metering issues in the weekend. It would be best if you contact Telstra 24/7 Lice Chat and register your concernHere is the link https://livechat.telstra.com/TCOM:Crowdsupport:Consumer
-
I bought license for adobe creative cloud but i can't use any of the programs. I already used the 30 days trial and after that i couldn't use a single one of the programs. can anybody help me...
Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
Using iSetup for day-to-day change management
We are an existing 11.5.10.2 e-business shop with many instances and many release flows. We've done a little bit of foundation object automation with fndload (just conc programs and request sets). We're contemplating using iSetup for day-to-day migration of of other foundation objects from instance to instance. We have very strict segregation of duties so the folks who do the migrations are not very oracle knowledgable. Thus developers must create detailed instructions for entering the foundation objects, possibilities for error are higher than we'd like, entry is very time consuming, etc.
I've noticed that the general advertised thrust of iSetup is for new implementations. Is there anything wrong with the concept of using if for new/changed foundation objects (conc prog, req set, responsibilities, profile options, dff's, menus, and anything else it can do)? Any thoughts on pros and cons of using iSetup versus scripting fndload for each object?Hi,
iSetup can be used for both fresh implementations as well as existing ones similar to what you have described in your question.
For some of the setups viz. Foundation objects, iSetup does internally use FNDLOAD.
The advantage of using iSetup vs. Scripting is:
Reporting and the Load Orchestrating mechanism which is built into iSetup. For e.g within Foundation Selection Set available in iSetup - KFF, DFF, MENU, RESP etc. Loading sequence is managed by iSetup. You could also generate Comparison Reports for before and after Load etc. which would not be possible if you used scripting alone.
iSetup also supports native APIs written as per iSetup fwk specs and they are more rich in terms of features viz. Filtering, Transform etc.
Thanks, -
How to query which Tcodes specified user used with one day?
Hi guys:
How to query which Tcodes specified user used with one day?Hi
You can use transaction code ST03N.
1. Go to tx code - ST03N
2. Under "Workload" you can select your "Instance or Total" so that it expands and shows you Days, Week, Month.
3. If you want to look at the transactions executed for a particular day, lets say, then double click on any day.
4. At the bottom left you get "Analysis Views"
5. Select & expand "User and Settlement Statistics"
6. Double click on "User Profile"
7. On the right side of the window you get a list of all the users
8. Double click on a particular user you want to view the details of.
9. The new screen will display the "Transactions/Reports Utilized by User XXX"
If you wanna track which users executed a particular transacation then follow this:
10. In "Analysis Views" expand "Transaction Profile"
11. Double click on "Standard"
You can view the list of Transactions and Reports.
12. Double click on the Tx Code or Report you wanna check and it will show the Use of it.
This will help you.
Regards
Sumit Jain
[reward with points if the answer is useful]
Maybe you are looking for
-
Changing the file name of photo in Finder.
I need to change the file name of my photos. I have changed the settings so that they show on iPhoto as 001, 002 etc - but I need this information to also be set in Finder. Is this possible? NikiKL
-
Can I lock a iMac using iCloud if someone sign outs from iCloud?
Hi everyone, I just wanted to make some tests on my iMac. I activated "Find My Mac" through iCloud. When I am signing out from iCloud (Control panel on OSX's system preference) iCloud.com is showing no device to track. Also, if I change account on iC
-
Which SMARTTV (SAMSUNG U46F7000 or SONY BRAVIA W8 46'') has a better communication and functionality with apple devices (i pad- iphone). Since the above manufacturers do not give me a straight answer and it is very important reason for me to make a c
-
We have a requirement to launch custom webdynpro java app when the user selects the atttachment for the UWL task. We can modify the UWL XML file to lauch custom app for a task but for attachments I am not sure. Is there a way to configure the attachm
-
Uploading BackupFiles from PC suite to 6300
I've just bought another 6300. Having backed up my contacts, messages, calender etc. from my 1 year old 6300, I can't get the files back into the new phone. It stops halfway through saying "Connection to the phone was lost. Reconnect the phone and re