3GS 3.0.1 - Cannot send mail, You did not specify any recipient
Whenever I send a message from iPhone with MobileMe account and then resync the account with server (Push is off), the very same message, already sent with success, appears in Outgoing folder and error pops up saying:
*Cannot send mail, You did not specify any recipient*
See the picture below:
http://gitarzysta.com/iphone/error1.jpg
It cannot be deleted, either - error message pops up saying: *Unable to move message*
http://gitarzysta.com/iphone/error2.jpg
Important: it was sent and received successfully. It is just either iPhone, MobileMe or both that have problems to sync correctly.
On my Mac that I sync with this MobileMe account all is fine.
What can be wrong? There was an old topic here, from 2008, where several users of 3G had exactly the same issue, but no root cause or solution was provided.
Thanks!
Message was edited by: gitarzysta
Try deleting and manually recreating the account on your iPhone.
If you transferred the account settings from your Mac via the iTunes sync process - selected under the Info tab for your iPhone sync preferences with iTunes, deselect this for your iPhone sync preferences followed by selecting Apply before doing so.
Similar Messages
-
Cannot Send Mail - You did not specify any recipients
Hi all,
I have an email stuck in my outbox which has the "This message has not been downloaded from the server" issue I have seen on this forum. Everytime I go to my email folders list, I get the 'Cannot Send Mail - You did not specify any recipients' error message. I am unable to trash it, move it as I get the 'Unable to Move Message' error.
Any ideas how I can remove this message and clear my outbox!?
Thanks,Me too! This is very annoying. I LOVE Apple but this new 3G keeps on throwing curveballs at me. I, too, deleted my e-mail account from my iPhone to get rid of this "unsent message" but with Apple you shouldn't have to do that! Certain that it will happen again, I'm interested if anyone comes up with any fixes so that next time we don't have to delete/add e-mail account.
-
"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!
lots of people seem to be havgin a problem sending email from iCloud webmail.
does your email address have uppercase characters in it?
if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that -
Excpetion "You did not specify the transaction currency burden amount".
Hi,
When I am running "PRC: Interface Supplier Costs" then its firing another Program i.e., "AUD: Supplier Costs Interface Audit". In the second Program's output I am getting a message "You did not specify the transaction currency burden amount".
I created and approved an Expense PO and then I created an Invoice (matching that PO) and did the Payment for that Invoice and generated accounting. After that I ran "PRC: Interface Supplier Costs" to transfer the amount to my Project. The Program is ending up with the exception that "You did not specify the transaction currency burden amount".
What could be the reason and how to solve it.
Regards,
Khan.Hi
Check if your project is set up as burdened, and if the expenditure organization & expenditure type of the PO distribution are supposed to be burdened. Verify that burden multiplier is available in te active burden schecule.
Dina -
Cannot send mail - server does not allow relaying
I keep getting a sporadic error message on my ipad: "cannot send mail. The recipient was rejected by the server because it does not allow relaying". Sometimes it doesn't happen and the mail sends fine. Sometimes I get the error message but the message then sends later. Sometimes it never sends.
Can anyone help?Hi, I've suddenly encountered this problem. I have a 1st gen iPad. I've reset, deleted, re-added, turned on both outgoing servers, added my password--this last doesn't stay in the primary outgoing server field; when I go back in, the password field is filled with the (optional) text again and when I 'click' into the authentication box, the password is no longer checked. However, these are all filled in the secondary outgoing server, so it shouldn't matter. Restarted the iPad a couple times. Using system 5.1.1--I think that's as far as I can go. Any miracles out there?
-
Error on sender FCC: InterfaceDetermination did not yield any actual intfc
Hi Experts,
I am developing a File to Proxy scenario. Sender File adapter with FCC has been configured as required with the Fixedfiled lenghths and filed names. On trying to execute the i/f by placing the source file at the desired location; Sender Communication channel throws the following exception: Error: com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface. I am using the iNtegrated configuration object on PI 7.3 and Ic has been configured correctly too.
the adapter logs look as follows:
18.10.2011 08:20:46 Information Channel CC_BOURQUE_AccrualTransactions_FILE_Sender1: Converted complete file content to XML format
18.10.2011 08:20:46 Information Channel CC_BOURQUE_AccrualTransactions_FILE_Sender1: Send binary file "D:\Interfaces\ITF\07\Out\freight_export.dat", size 46538 with QoS EO
18.10.2011 08:20:46 Information MP: processing local module localejbs/CallSapAdapter
18.10.2011 08:20:46 Information Application attempting to send an XI message asynchronously using connection File_http://sap.com/xi/XI/System
18.10.2011 08:20:46 Error Returning to application. Exception: com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface
18.10.2011 08:20:46 Error MP: exception caught with cause com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface
18.10.2011 08:20:46 Error Attempt to process file failed with com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface
Please guide me if I am missing on anything.
Regards,
ElizabethHi Mark,
Have removed the namespace from the message type. Still the same issue occurs for mapping.
On trying to copy and use the source payload on the Message mapping test tab, the source structure is reflected with all the elements and nodes in red.
Following is how my source payload looks like:
<?xml version="1.0" encoding="UTF-8"?>
<MT_AccrualsTransactions>
<Accruals>
<Row>
<BillOfLadingNumber>21776</BillOfLadingNumber>
<CarrierCode>VB</CarrierCode>
<ChargeTypeInterface>FO</ChargeTypeInterface>
<CreateDate>07-01-201107:45:22:303</CreateDate>
<Amount>28830.51</Amount>
<Currency>U</Currency>
<ExportDate>07-01-201107:45:24:070</ExportDate>
<VendorCode>105106</VendorCode>
<CustomData1>5140200-1000000</CustomData1>
<CustomData2>6635</CustomData2>
<CustomData3>88846</CustomData3>
<CustomData4>5 2011/</CustomData4>
<CustomData5>01/31</CustomData5>
<CustomData6>034</CustomData6>
<CustomData7></CustomData7>
<CustomData8></CustomData8>
<CustomData9></CustomData9>
<CustomData10></CustomData10>
<ReferenceNo></ReferenceNo>
<EquipmentInitials></EquipmentInitials>
<EquipmentNumber>B MTC723</EquipmentNumber>
<ShipDateTime>01</ShipDateTime>
<OrderNumber>-29-201107:00:00:000U88714</OrderNumber>
<ShippedQty></ShippedQty>
<ShippedUOM></ShippedUOM>
<OrganizationCode/>
<AccrualDate/>
<EOF/>
</Row>
</Accruals>
</MT_AccrualsTransactions>
What could be wrong?
Regards,
Elizabeth -
Cannot send mail with no Host specified exception in ALBPM 6.0.4
Hi,
I try to send mail by using:
send mail
using
from="[email protected]",
recipient = "[email protected]",
subject = "credit check",
message = "you credit card is OK."
But as I debug it, an exception thrown:
Caused by: java.io.IOException: No host specified
at fuego.io.SMTPClient.sendMail(SMTPClient.java:209)
at fuego.io.SMTPClient.sendMail(SMTPClient.java:156)
at fuego.components.OutgoingServerDebug.send(OutgoingServerDebug.java:37)
at fuego.components.Mail.send(Mail.java:1210)
at fuego.components.Mail.send(Mail.java:639)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
at fuego.lang.ObjectTypeDescription.invokeMethod(ObjectTypeDescription.java:1463)
... 24 more
I have already set the mail server in the engine preference, and test successfully. Could you help me ? Thanks.
Best Regards,
Billtry....use
mail outgoing server, add one external resource type "Mail Outgoing Service" imput informations and
use this code
Mail reminderEmail;
reminderEmail = Mail();
reminderEmail.subject = "xxxx";
reminderEmail.from = "[email protected]";
reminderEmail.recipient= "[email protected]";
reminderEmail.message = "xxxxx"
MailSender sender;
sender = MailSender(mail : reminderEmail);
sender.send(implname : "mail");
mail --> is name external resource
Edited by: Marcelogim on Oct 24, 2008 5:53 AM -
REP-0503: You did not specify a name of the report
would you tell me where I could find the detail help for report error message. thks!
Hi,
Though you can search for it in the online help its too slow and cumbersome to do so. Instead check
1)whether this reports exist in the reports_path of your server..the path that its searching for reports you can get it using the showenv command of the rwservlet like
http://youriasservername:port/reports/rwservlet/showenv?server=<your reports server>
2) if you are calling this report from forms make sure that the dummy report object that you have inthe design time does have a report name.
HTH
Elango. -
REP-0503: You did not specify the name of a report
I am getting the above error while calling a report from a form in Oracle 9iDS.
I have created anode in the report node of the form(TESTREP1) this is same as my report rdf name which is stored in C:\temp\9ids folder, report_path points to this folder,OC4J is start, in the properties of TEST_REP1 in the form i have set:
filename C:\temp\9ids_test\test_Rep1.rdf
My code on a when-button-pressed trigger is
DECLARE
repid report_object;
v_Rep varchar2(100);
BEGIN
repid := FIND_REPORT_OBJECT('TEST_REP1');message(get_report_object_property(repid, PORT_FILENAME));
-- i can see this message showing the filename as
--C:\temp\9ids\test_rep1.rdf
v_rep := Run_report_object('TEST_REP1');
message('test report')
-- i can see this message but fails to run the report
--with REP-0503
exception
when others then
message('Error: '||sqlerrm);
END;
where am i wrong?
Regards,
SumitaThe following code also doesnt work
DECLARE
repid report_object;
v_Rep varchar2(100);
BEGIN
repid := FIND_REPORT_OBJECT('TEST_REP1');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, 'cache');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'pdf');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, ASYNCHRONOUS);
v_rep := RUN_REPORT_OBJECT(repid);
exception
when others then
message('Error: '||sqlerrm);
END;
In Java Console error message
<<<
Loading http://lra10241:8888/forms90/java/f90all_jinit.jar from JAR cache
connectMode=HTTP, native.
Forms Applet version is : 90290
oracle.forms.net.ConnectionException: Forms session <3> aborted: unable to communicate with runtime process.
at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
at oracle.forms.net.HTTPNStream.flush(Unknown Source)
at java.io.DataOutputStream.flush(Unknown Source)
at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
>>>>>
Please help its urgent -
Just in the last couple of days I find that I cannot send mail. I compose and when I hit send it just disappears. No attempt at sending is made. It does not save a draft or try to connect. It does not end up in my Outbox either. The BCC copies never arrive. I have checked and my software is up to date. I have tried to delete all of the accounts and readd them one at a time. No luck. The last I can see that I have sent messages would be from a few days ago. The mail is downloading but seems sluggish all around.
Any clues?
thanks
TerriI had to reset my Network connections in the General Preferences and it fixed the problem. I have no idea how it messed up in the first place, but the reset worked.
-
We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.
About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone. Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc. This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...
-
Why do I get the message "Cannot send mail, the user name and or password for my email outgoing server is incorrect"? I use the same account, etc. on my iPhone and haven't any trouble sending mail.
If your email requires a password for the SMTP server you can set it up in the settings in the General mail setup. Some i.e Gmail require a password for SMTP.
Otherwise you will probably get better answers in the iPad forum.
https://discussions.apple.com/community/ipad/using_ipad -
Cannot Send Mail from my iPhone 4s
I am no longer able to send out replies or new emails from my phone, this is very recent and I have tried everything I know of.. But I am not THAT tech-savvy.
So, anyways, when I go to send an email or reply to one, I get a pop-up box that says "Cannot Send Mail - The username or password for "said"-hotmail account is incorrect." So then I go to the settings enter my correct password for my hotmail account, it accepts it, and try again. Same pop-box appears, even though my password and username are both correct. I know that they are correct because I am able to receive email with no problems at all.
Is this a fixable problem or should I call Apple or take my phone in directly to them and have one of the techs look at it ?
Thanks;
OdyssyProblems with sending mail is rooted in the settings for the SMTP server. There are places in this that say the username and password are optional, but normally are required by many email providers. Go back into the SMTP server settings and check all of the areas. I also agree with Doctor9fan to check your SSL settings. If you cannot get it to work like this, then remove the account from the device and add it back. As you complete the creation, make sure the account verifies. You can also check the Microsoft site to make sure settings are correct for Hotmail.
-
Cannot send mail from icloud from iPhone?
Since updating to iCloud I cannot send mail. I can receive. Error message says password incorrect. Using same
Password on mac book works fine and I am able to send mailAbout ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone. Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc. This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...
-
I have been emailing pictures from my ipad to my computer and have been going along nicely and now when I went to send 5 pictures to my computer from my ipad I am getting a message that says " cannot send mail The message was rejected by the server" cannot understand why this is happening and have not been able to fix. Now when I try to send pictues even to another email address I am getting the same message.
Help.Email may not be the best way to move pictures.
There are lots of ways of moving files.
A simple and popular way to copy files and share files among your devices.
https://www.dropbox.com/
"Box lets you store all of your content online, so you can access, manage and share it from anywhere. Integrate Box with Google Apps and Salesforce and access Box on mobile devices" Rated the most secure cloud storage by SkyHigh Networks.
https://www.box.com/
Using iTunes to transfer files:
http://support.apple.com/kb/HT4094?viewlocale=en_US&locale=en_US
Files Connect -- "Cloud Storage services like Dropbox, MobileMe iDisk, Google Docs/Picasa, Facebook photos, FTP, SFTP, WebDAV ... AFS (Apple File Shares) SMB (Windows shares) protocols"
https://itunes.apple.com/us/app/files-connect/id404324302?mt=8
Windows File server
http://itunes.apple.com/us/app/filebrowser-access-files-on/id364738545?mt=8
"The kiteworks mobile file sharing solution provides secure creation, viewing, and sharing of enterprise content on smartphones and tablets while providing IT and security teams the administrative controls to manage user privileges and access rights necessary to ensure enterprise security and compliance." " Includes choice of private cloud on-premise."
http://www.accellion.com/solutions/mobile-enablement/mobile-file-sharing
"Dukto is a simple application that allows you to share files between devices connected to the same (wireless) LAN network."
http://www.tidal.it/?page_id=309&lang=en
http://www.msec.it/blog/?page_id=11
Maybe you are looking for
-
Getting the page size in PDF file
i want know how do get the page size in PDF file befor placing every page in document for example height=297 mm And width=210mm
-
I have been sharing itunes with MP3 rocket but I still purchase many songs and books from itunes normally.I have not had any trouble. Just recently a pop up window appears after I have been sharing and it tells me that my Apple Push is not working co
-
I noticed on 12/27/2014 that I had a huge spike in total steps recorded by the health app on my 6. It recorded 18,298 steps at 07:35 ! The screen shots below show that the app created this record. I am not using any other external devices to track da
-
AttributeBinding.setinputValue() not working
Hi, I've created an ADF bounded task flow from an Oracle BPM 11g Human Task. This caused all the data defined within the Human task to be exposed as data controls. But it seems that I'm not able to alter all the values. For example, there is an attri
-
Can't download photoshop cc due to error A12E5???
I can't seem to complete the download for photoshop cc which i have just paid for....... Starts to download then says cannot complete due to Error: A12E5?? What does this mean?? Please help.