3GS Bricks Itself After 4.2 Update

Have a 3GS, previously running iOS 4.1. Upgraded to 4.2 today.
Upgrade appeared to work fine. Was playing with the phone and its potential new features (what there are of them) and it just shut itself off. And it won't turn back on.
Anyone else having this problem? Anyone have a solution (short of attempting to restore from backup and/or just get that iPhone 4 I've been meaning to buy)?
Thanks.
-Craig.

roscop wrote:
I also just made the 4.2 update on a 3GS and now having NO funtionality with any of my hard buttons (volume up/down, mute switch, and top sleep button).
Did a full restore and still no resolution. Called apple and they have no other complaints.
It must be the update! 3 sets of buttons all of a sudden don't work after the update.
Apple needs to allow a version roll back option.
It is not the version you updated to; it is the update process that caused the problem. A rollback wouldn't help because it would still corrupt the previous version during the update.
Your symptoms are not ones I have seen before. Try a DFU restore on a different computer, or if you use the same computer use a USB port directly on the computer, disconnect all non-essential USB devices, disable your antivirus.
See: http://support.apple.com/kb/HT1808

Similar Messages

  • My APTV 3 restarts by itself after the last update. plz help me

    Netquark Sep 16, 2014 8:42 AM   
    Hello my APTV 3 restarts by itself after the last update.
    I restore my APTV with pc and it does not work.
    if I unplug the cables after 30 minutes, it works, but once sleep if you restarts the problem comes back. plz help me
    Apple TV

    Did you successfully restore the Apple TV?
    Apple TV (2nd and 3rd generation): Restoring your Apple TV

  • My 3gs wont restore after ios 5 update. I have tried firmware restore and restore from backup, neither works. All I get is "iphone restore failed because backup session failed" Any ideas on how to make a successful restore with this ios 5 update?

    My 3gs wont restore after ios 5 update. I have tried firmware restore and restore from backup, neither works. All I get is "iphone restore failed because backup session failed" Any ideas on how to make a successful restore with this ios 5 update?

    I was having the same problem, I backed up my phone and then updated to iOS 5 and then it kept telling me it could not restore from my backup as it had failed.  After reading a bunch of forums and posts and trying everything, I did manage to get it to work.  I had tried the Time zone, creating a new computer user account, disabling anti-virus, etc.
    It took a combination of things, one of which was disabling the anti-virus completely and copying the contents of the backup folder to my desktop and then deleting everything in the backup folder.  Then I rebooted the PC, entirely disabled the anti-virus, copied the one backup I wanted to restore from the desktop to the backup folder and then trying to restore.  Low and behold the phone said restoring from backup and I am back in business, so when in doubt, trying combining some of the fixes together.

  • My mid-2011 MacBook Air bricks itself after 10.7.2 update

    I have a new MacBook Air (11") that was working just great, until today.  Today, I used Software Update to install the updates, which included 10.7.2 as well as the recue partition update.
    I did everything you're supposed to do, and when it rebooted, the gray screen comes up, and it shows the spinny doohickey on the bottom showing that it's working.  Then, suddenly, up pops a big "no" icon (the circle with the slash through it) after about 60 seconds.
    It simply doesn't do anything after that.
    Hard-power-off, wait, power-on, repeat, same thing.
    So I reboot with cmd-R to get the rescue partition. It works fine; I ask it to re-install Mac OS X, which then takes about 45 minutes (argh).  Finally, Mac OS X is back, the machine is nicely booted up, all my files are there, everything is good.. But of course, the reinstall took me back to 10.7.1.
    All I want to do is upgrade my fricking iPhone to IOS 5.0, but I can't do that without knowing I can sync which requires iCloud which of course requires 10.7.2.  So I *have* to re-do the upgrade.
    Back to Software Update, back to installing 10.7.2. And .. 20 minutes later .. back to bricked MacBook Air.
    What a waste of my time. What a failure, Apple. I'm very very very very very unhappy that I've wasted so much time just to update my damned iPhone to IOS 5. I'm still without an update. Now I'm trying to figure out how to move my iTunes to another machine -- not nearly as obvious as it should be.  ARGH. I'm going to throw this MacBook Air off the balcony in about 10 minutes. :-(
    Thanks for listening.
      Steve

    Wow, you're right -- I can't believe it. I just really can't believe they would screw up so badly, yet when I search for "10.7.2 filevault" I don't find more than a couple of articles about it on the web (including this thread). Why on earth wouldn't Apple have put up some kind of warning about this? I can't believe it, really. It's insane.
    On my newly-functional 10.7.2 MBA, I wanted to test your theory and so I turned on filevault 2 and encrypted the main disk again.  It of course wanted me to reboot. So I rebooted. And *blammy* -- same error / boot failure.  Wow.  Also, interestingly, even on a working 10.7.2 system, you can't mount a USB drive that was encrypted using Filevault 2 encryption (in Disk Utility, e.g., as a "Mac OS X, journalled, encrypted" volume that was encrypted with DiskUtility on Lion 10.7.1).  I still have a 10.7.1 machine that I will not upgrade until I can at least decrypt the disk -- but right now, Disk Utility tells me it fails decrypting the external USB disk so I'm hosed!!! ARGH.
    Now, going back to the booting problem after upgrade -- for anyone's reference who's still keeping score -- you can easily recover from the booting problem with upgrading a Filevault 2 root drive: Power-cycle the machine and then hold down cmd-r to bring up the Lion Recovery application.  Within Lion Recovery, choose "Disk Utility", and then click on the (as yet unmounted, still encrypted) root hard drive to select it. Then go to the File menu, and choose "Turn off encryption" for this disk.  It then prompts you for the password, and if you enter it, *blammy* you're back up and running again.
    In my case, the disk had only just begun encrypting so the action was instant, and then once it confirmed the disk was now decrypted, I simply chose "Restart" from the Apple menu, and I was back in business (no hairy re-installs to deal with).  If this is an already-encrypted volume, presumably it'll take you a bit longer (the normal 45-minutes to 2 hours) to decrypt it.  But at least no more installing software -- it'll "just work".
    Maybe I'll go post a simpler version of these instructinos on the other threads, but this is the simplest fix -- just turn off filevault 2 from within Lion Recovery, basically, and that fixes the boot problems.
    Apple, if you're listening, you really really really need to say something to your users so they know. Many many many MBA users are likely to have still not upgraded. You can prevent them from hating you and your products by making sure they don't screw the pooch here.  Short version: Mid-2011 MacBook Airs running Filevault 2 WILL NOT BOOT after 10.7.2 update; so users should turn off Filevault2 before upgrading.
      Steve

  • IPhone 3GS frozen/rebooting after iOS 5 update.

    Hello all,
    I updated my iPhone 3GS to iOS 5 last night.  All seemed well until I noticed the restore was complete.  The iPhone was frozen on the Home Screen.  The flash of white the runs beneath the slide to unlock is frozen at different intervals everytime the phone reboots itself.  I have tried restoring the phone multiple time.  I am unable to perform a hard reset because the phone's sleep button is nonfunctional.  When the phone decides to reboot itself, about every two minutes, I notice that for a split second it flashes to a gray screen with an iPhone in darker gray.  There are words all over the screen but I am unable to read any of it before te phone resets.  I think I see a "Peparing to Install" title on the screen, but that is a guess.  Any ideas from anyone?  I'm really at a loss of what to do.

    An update on my problem above.  I too restored my software but all it got me was losing all of my ZombieLife progress, LOL.
    It seems to me that my phone freezes/reboots when it is trying to grab a signal for an update.  It has happened to me several times on the initial visit to a website on Safari and also on Nike GPS.  I can still see the page I was on in the background a bit but there is no recovering the phone.  I have to then hold down the lock button to restart it and sometimes that will not work unless it is on a charger. 
    Today my battery went from around 70% to the phone saying it needed to be charged in the span of a few minutes.  When I did get it on the charger in my car it went back to 66% after rebooting.
    I don't know if it means much but I have AppToolKit Lite and in the System Monitor it shows you memory usage.  At the moment out of 254.23MB I have 120M Active and the only I am running is the app.  Wired is at 40M, Inactive is at 32.20M and Free is at 63.90.  This is after I double-clicked the home key and killed all other apps.  When there are apps active the Free memory is next to nothing.  Not sure if this is a cause but I hope there is a solution soon with 5.01!

  • HELP: WD External Hard drive disconnecting by itself after Maverick OSX update.

    Hello!
    I just finished updating my OSX from Mountain Lion 10.8 to Maverick 10.9
    I am using 15 inch Macbook Pro late 2011 processor is i7 and 4GB memory.
    Before on ML I'm rarely or never expirience this where my external drive is disconnecting
    by itself. I am using USB hub (10 ports) I have 2 HD's both are 1TB and on that usb port
    my cooling pad is also connected as well the data plug for iphone. My USB port has another
    power cable which is also in use.
    Now I have three questions
    1) Do you think that one of my HD has an issue? because this is the only one
    that is disconnecting by it self? when I unplug and plug it back it shows to Utility Disk
    but it is not mounting. I manage to restore it by clicking the repair button several time
    but it keeps disconnecting by itself and I am not comfortable on doing this time to time.
    2) Do you think updating to Maverick is one of the reason why this is happening?
    3) What solution i can do to solve this issue.
    Thank you in advance.

    Hi to All
    It seems my issue is already solved I didn't expirience any auto ejecting anymore after I formated my 1TB using the Disk Utility. I already bring back the files that I removed before from my 1TB and so far its all good.
    Another tip is if you will plug your external HD's to a usb port give a one interval slot because if you do there's a possibility that it may auto eject again, this happen to me since updating to Maverick but in Mountain Lion maybe it happen to be once or thrice maybe because of bad ejecting that i've done to my 1TB.
    This all is as per my intuition, observation and pure guts but now im good and my usb's are not auto ejecting anymore from the day I'd format it to disk utility using erase (of course in exfat format) until now. I wish this will help others too...
    Have a nice day!

  • Why my iPhone 4S keep reseting by itself after iOS 7 update?

    Hello:
    This s not funny at all.  After I updated to IOS 7.0.3 couple weeks ago, there s several times my phone is reseting by itself.
    When I try to turned ON again, s telling me the battery s dead and need to connect it to the power source.
    After connected, is coming back again to the live and telling me the right charge of battery I had before.
    Battery it was never empty or close to be. Always is around 50 % of capacity.
    This happens on the middle of a call, texting or mailing.
    Tell me what I could do to stop this mess up,
    Please.

    janirch wrote:
    I tried everything. I restarted it, I putted it on factory settings, I deleted every App but nothing helped.
    In Apple Store, they told me that it is a hardware problem and my phone isn't able to use the new iOS 7.1 because my phone is too old but it's only 2,5 years old.
    I suspect that something in that conversation was seriously misunderstood.  The iPhone 4S runs iOS 7 without any issues.
    If the device has a hardware issue, then it does not matter what version of iOS is on the device, it will not function properly.

  • My iPhone 3gs has frozen after trying to update to 5.0.1 and will not turn on or off. Only showing the iTunes logo and the usb cable on the screen. What can I do to fix this?

    My iPhone 3gs has frozen while doing update 5.0.1 I think it was. All it shows is the iTunes logo and the usb cable on the screen. I will not turn on or off. I have tried reconnecting to iTunes but nothing happens. Have held both buttons for 10 seconds etc and nothing is working! What can I do?

    Here are Apple Steps: http://support.apple.com/kb/HT1808

  • USB drive started unmounting itself after OS X update

    Has anyone a work around to get a USB hard drive to stop unmounting itself? The drive used to work flawlessly and only started behaving as though the cable were disconnected following an OS X update.

    Don't know about the update as a possible cause, but WD externals have a reputation for being very flakey with Macs, or flakey period. You could try a PRAM reset: hold CMD-Option-P-R keys down together at the startup chime, keep holding down until you hear two more chimes, total three, then let go and it will finish booting.
    Also, you might try re-applying the 10.5.8 Combo Update.
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate

  • U430 turns off by itself after 8.1 update

    So I've had this issue ever since upgrading to 8.1.  I bought my laptop a few months ago with Windows 8 on it.  Ever since updating, if I leave the computer with the screen open and walk away, I come back and it shut down!  I cannot figure this out!  I've looked in power options but it talks about going into sleep, not shutting off.  I know when it's in sleep because the power button flashes slowly.  Can anyone help me figure this out?  Tired of walking back to my laptop and it being shut off.  Luckily it boots quick but still, I don't want to have to open all my applications up again.  Thanks.  

    i have the exact same problem , tried everything but still it happens , does somebody have an idea ?

  • IPhone 3GS continuously restarting after iOS 6 update

    Since I updated it, I've not been able to put it in recovery mode, get iTunes to recognise or turn it out. The apple logo appears for around 3-5s when turned on, but then restarts and repeats until the battery goes flat. Any fix to this or have I just totaled my phone because of this stupid ******* company?

    Charge iPhone on Wall Charger for at least 20 minutes, longer will be better, but maybe 20 minutes will work. Then open iTunes on computer. Then connect iPhone to computer with USB Cable. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode, usually takes about 20 seconds of holding both buttons. Click the Restore button of iTunes. If this does not work last step would be to perform a DFU Mode Restore.

  • Will iCloud update itself after it failed update as I updated to iOS 6?

    Hi, because of my poor 3G connection at the office, iCloud did not update its when updating my iPhone 4S to iOS 6 and therefore, Shared Photo Streams is not working.
    Is there any way to make sure this will happen some time in the future or will I just have to wait for my 4S to catch up at some point?

    Try:
    iOS: Device not recognized in iTunes for Windows
    I would start with:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • 3GS bass distortion after iso 5 update

    As with a lot of people out there who have updated there iPhone to iso 5 and have now found out that their music recordings sound completely terrible. I've read all I can on trying to fix the problem sound check on/off, lowering the volume in iTunes, playing around with the eq, wiping off all my music then re sync and putting it all back on. Nothing has worked all my recordings sound terrible and even worse if you use hi quality headphones or running on hi fi. I've spoken to apple support who have acknowledged there is a problem but have no date to give me on future update fixes. I have also noticed delays in certain functions of the iPhone including delays in tones, lock click, safari dropping out, touch screen locking up so that you can't do anything apart from close down apps or resetting the iPhone. I can live with the rest but not the music distortion. Is this apple holding us all to ransom I.e causing later models to slow down or not function properly so we have to upgrade phone ? All I know is people bought these products because they enjoy their music above anything else, to me having a phone and an iPod in one solves all my problems and apple product have reined supreme for sound quality, well until now. Apple pls take note and read all these problem forums because the new iOS 5 has ruined my music pleasure and a lot of other peoples too. It's a disgrace and needs immediate attention. Pls fix these issues before I have to seek ways of downgrading my firmware to one that works. 

    I thought it was me! Im having the same problem. Trying to get a wallpapers folder on my phone, and it creats another copy folder of it, only its named Photo Album. I tried to create a new album and copy all the pictures to the new one, and then remove the other two, but it just removed the pictures from the new album as well. Definitel,y needs to be fixed

  • Service suspended itself after iOS7 update!

    Service on my iPhone 5 suspended itself after I updated to iOS7. I had to manually re activate service a few minutes ago by logging on to Verizon Wireless's website. After reactivating service, a new window containing two pieces of news opened: one, I was congratulated for reactivating service, and two, I also was advised that the existing contract would be extended for an amount of time identical to the unsolicited suspension of service.
    How is this my problem? Why am I being penalized for a situation completely beyond my control? Verizon Wireless really grows into you, doesn't it?

    This is the response from a Verizon Customer Service Representative, when I requested their assistance restoring service. Please pay particular attention to text in bold:
    "I do see that when the device attempted it's reinitiation with the network the evening of 10/8 (which I assume is the evening you completed the update) it recognized a previous insurance claim from June where Asurion had reported the phone as lost/stolen. It appears you may have found the device and contacted them to reverse the claim, but the system still recognized the information being reported as stolen from Asurion".
    "When a software update through Apple is completed, it triggers the phone to reactivate it's wireless connections. This triggered the line to suspend when a new activation was attempted as a system security measure".
    "This is how the system is designed to keep your information safe and avoid someone being able to activate your lost/stolen phone onto their account. I'm sorry that it ended up causing so much frustration for you. I assure you that your account is safe and it wasn't due to anyone accessing your account unauthorized".
    "I do hope this helps to clarify what occured with your iPhone during the upgrade. I've confirmed that your Device ID and SIM have both been removed from our lost/stolen database for good, so you can complete future updates with ease and avoid this situation again in the future."
    As I said, service suspended itself after the iOS7 update.
    Amo
    Private information removed as required by the Terms of Service.
    Message was edited by: Admin Moderator

  • IPhone 3Gs: Error (-1) after attemped update to iOS 5

    After attempting to update to iOS 5 on my 3Gs, my iphone becomes bricked and enters recovery mode. The update proceeded as normal without issue untill it asked me to for a restore. Now, after every attempt to restore I receive the message: unknown error (-1).
    theiphonewiki.com lists error (-1) as:
    "Error occurs when one uses the "last ditch" method for preventing baseband updates on the iPhone 4. The baseband does not get updated using this method. Use TinyUmbrella to kick it out of recovery mode."
    My 3Gs is not jailbroken and I am unsure of thrid party software when it comes to my apple devices. Also error (-1) shows to be an error message for the iPhone 4, which is not the case in my situation.
    I have attempted these procedures:
    Removed the sim card, attempted recovery without sim card (x1): No change.
    Reinstalled the sim card, attempted recovery (x1): No change.
    Rebooted computer, attempted recovery (x5): No change.
    Switched USB ports, attempted recovery (x4): No change.
    Attempted recovery on multipule computers (x6): No change.
    Reinstalled iTunes, rebooted, attempted recovery (x1): No change
    Has anyone else experienced this issue? If so, has any procedure that I haven't tried worked for you? Any insight or recommendations would be very helpful.
    Thanks in advance!

    Here's what fixed it for me. Pretty simple mistake I overlooked.
    I turned off the firewall that was running in the back ground through my virus protection control panel. I then proceeded to make another attempt and it finished as it should have. I did loose all my settings, pictures and videos although, I still have the 2 notes I made in the Notes app. I would have gladly sacrificed the measurements I took for the gutters on my house for the pictures I took of my nephew the day he was born. This is a wake up call to import my photos more offten and/or before another update. Win some, loose some I guess. At least I can make phone calls now. >.<
    I hope this will work for anyone else having the same issues.
    Good luck!

Maybe you are looking for

  • Printing custom error Messages in Messages column in WEBADI Excel Template

    I have created a Custom PL/SQL API and Custom integrator to upload data in our Custom Table for Receipts and Payments. Im printing error messages using the RAISE APPLICATION ERROR in the Messages Column of webadi upload spreadsheet. However the error

  • Error 500 on starting analytics

    Hi, I'm running OBISE1 in a VMware for testing. Last week I build a repository and created some views with answers and put it into my dashboard. Everything was fine. Now I can't start analytics anymore. The server is running. It doesn't matter what a

  • New Email With Attachment

    I love the shortcut command "New Email With Attachment." I seem to have lost the functionality to create an email directly using a file from finder and its no longer in the Keboard Shortcuts menu. I just refered to another mac not running on Mavricks

  • Problems in sending and recieving messages, calls go missed without notifying ..!

    So here's my problem,,,,!! while sending messages it doesn't send message at once as it happens commonly, the message is sent after a while i knw that by hearing the swoop sound... same is with sending messages... calls go unnoticed/missed because ca

  • Report execution takes long time

    Dear all, we have a report which takes long time to exceute due to select statement.. here is the code.. SELECT vkorg vtweg spart kunnr kunn2 AS division FROM knvp     INTO CORRESPONDING FIELDS OF TABLE hier     WHERE kunn2 IN s_kunnr     AND   vkorg