3Gs cant be detect after fail upgrade to iOS5

Upgrade the iOS 5 in iphone 3gs, after back the phone and installing show error to call to restart, after restart, the phone cannot be detected and iphone. Any one can help to solve it?

Same problem here ! I called Apple Care and got two people during 2 hours on call, they were unable to explain why and just repeat that "the use of TVout for recording purpose are not supported by apple".
Why this settings has to be hidden ?
FYI : i'm able to capture Ipad 2 thru BMD Intensity Pro but not able to switch PAL and NTSC in TV OUT settings to get a correct input. TV OUT setting doesn't appear.

Similar Messages

  • HT1338 iphone 3gs cant be activated after software update to ios5

    iphone 3gs cant be activated after software update to ios5

    What does it say when you look at Settings=>General=>About=>Carrier?
    Which version of Cydia is on your iPhone - the one with the black & white
    icon or another one? What color is the Cydia icon?

  • After the upgrade to ios5, I can no longer use my iPad to make purchases on ticketmaster.  Does anyone have a solution?

    After the upgrade to ios5, I can no longer use my iPad to make purchases on ticketmaster.  Does anyone have a solution?

    Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
    If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
    http://roaringapps.com/apps:table
    Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
    My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
    When your ready for new hardware and all new software, then buy a new machine.
    If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
    http://www.bombich.com/get_ready_for_lion.html

  • My camera connection kit stopped working after I upgraded to  ios5

    My camera connection kit stopped working after I upgraded to ios5. If I plug it in to my iphone I get a message saying it is not recognised, but when I plug it into the ipad it does nothing at all. I've tried resetting it, but that makes no difference.
    I have an ipad 1 which I bought because it had lots of storage. I'm going on holiday soon, and I want to be able to upload my holiday photos to my ipad while I'm away.
    Any suggestions?

    Actually this sounds the same problem I have on my iPad2.
    I use a cheap copy of the CCK which I got off eBay.
    It worked great when fitted with a 16gb SD card, but since I upgraded to 5.01 it has stopped working.
    Sorry, no solution at this point but it worked on 4.3.3 but not on 5.01.
    I'll keep on looking, was considering a proper CCK thinking the cheapmversion may be drawing too much current, but it sounds like that might not work either.

  • I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define

    I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define the net. It is only in WPA enterprize.
    Thanks,
    Eyal

    I tried this! Somebody suggested it in another thread. It did not work, sadly.

  • Re: Lenovo S660 problems after failed upgrade

    Hi Friends,
    Here I found a solution to the Failed Upgrade Problem to latest ROW_S062_141126 firmware version. It works like a magic.
    http://www.androidrookies.com/2014/12/lenovo-s660-update-to-latest-row.html
    But the issue with WIFI Connectivity is not solved in this version. It remains as it was in ROW_S058.
    12/29 EDIT: This message was moved to the front of the discussion for escalation purposes. Amy_Lenovo

    Hi
    Did you tried a factory reset after updating?
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Ipod Touch not getting detected after IOS upgrade.

    I have recently upgraded the firmware of my Ipod Touch (1G) to IOS 3.0.1 and was successful in upgrading.
    The issue i am facing is that my ipod touch is not getting detected after reconnecting and the ipod touch is not getting switched on...it is just showing the apple symbol and the progress bar.
    Please let me know if anyone has faced similar type of issue.
    Please also let me know the resolution for this.

    Are you using a USB hub? Try connecting the iphone directly to the computer's USB port and see if that makes a difference.
    Also, with the upgrade, this seems to happen a lot. Most of the time if it is not the USB issue above, it can be resolved by simply redownloading Itunes and installing it on top of your current installation.

  • Cant surf web after maverick upgrade

    Cant surf with Mozilla or Safari after maverick upgrade.  I have a regular macbook 2009ish model with 4gb of ram. 60gb of free hard drive space.
    Went from snow leapord to 10.6 to Maverick 10.8
    Have valid I.P. address, hooked directly to modem to no avail.
    Other laptop macbook pro works.
    Any suggestions?

    I'm having the same issue with Safari and Google Chrome.  Some web pages open really fast while others just hang up and park itself.  It's almost a mirror image of the iMessage experience I was having prior to the ios 7 7.0.3 release.  Safari is also not loading web pages on my Ipad either.  Some sites it will.  Some sites it won't.  I've changed my Airport Express settings to us Google DNS as well and it didn't matter.  Frustrating.

  • ITunes won't recgonize iPhone after failed upgrade

    I was trying to sync my iPhone 3GS when I was prompted to upgrade it. I went ahead and clicked yes to upgrade it. I left the computer and whe I returned about an hour later it asked me to enter my passcode so I did. Then it did its thing for about 30 minutes before telling me there was an unkwown error while upgrading it. During that time the screen on the iphone switched to the image of the usb cord with an arrow poining at the iTunes logo. I restarted my computer and disconnected and reconnected my iphone and now iTunes won't even read it and my iPhone won't do anything other than display that same image of the usb cord and iTunes logo. I'm totally frustrated here. Help! I'm running Windows 7 64 bit, iTunes version 10.6.1.7.
    I know the cable is fine because it reads my iPhone 4S just fine. I tried restarting and relaunching iTunes and I've also tried holding the power button and home button down for 10 seconds and nothing on the phone's end.

    Thanks, I tried this but also did not work. What finally worked was that on a whim I decided to switch to a different usb port and then it read it. I didn't try this at first because my other iphone was being read from the original port and the computer recognized both devices from that original port. It doesn't make sense. But I got it to finally work just by swtiching to a different port and now I can sync it from the original port.

  • Facetime and iMessage doesn't  work after I upgrade to iOS5.0

    The Facetime was working well with iOS 4.3.5  but after I upgrade to iOS 5, the Facetime can't work  on my ipodtouch 4G  It always failed
    Does anyone have this issue too?

    similar problem - after upgrading my itouch to ios5 it says my email is already in use and cannot setup imessage and facetime.  Had to reset the itouch and still didn't work.  any suggestions?

  • Why my iphone get lock after i upgrade to ios5

    why my iphone has been locked after i upgrade to ios 5??? i don't understand that specially i didnt buy it under contract with AT&T i buy it in cash from USA

    Doesn't matter if you bought is without a contract.  This does NOT mean it was unlocked.  Clearly, you bought a phone that was hacked to work with another carrier besides AT&T.  Now that you've upgraded, your phone is relocked to AT&T as it should be.
    AT&T does NOT unlock their phones.  Ever.

  • Why did my apps disappear from my iphone4 after I upgraded to ios5?

    I upgraded to ios5 for my iphone 4, and my apps are gone. ?????

    The downloads.sqlite is no longer used in current Firefox releases.
    Download history is stored as part of the normal browsing history (visited sites/links) in places.sqlite and a special annotation property identifies such an history item as a download item, so you can't separate them easily.
    *Downloads are treated as history items: clearing history removes included download items and vice verse.
    *When downloads are in progress you see an animated download button on the Navigation Toolbar showing an estimate of the remaining time
    *The Download button gets a green highlight once all download are finished to make you aware that new downloads are available.
    *Pause and Resume can be found in the right-click context menu of an item.
    You can display the new Downloads Manager in a tab by opening the about:downloads page and You can consider to open this page in a separate window.

  • SSRS disabled after failed upgrade

    Hi: I was attempting to upgrade an existing SQL 2008 server to SQL 2014 using the "upgrade an existing server" feature in SQL's installation manager.
    After being prompted to perform a number of upgrades (including upgrading to SQL 2008 R2), the 2014 installation started to proceed but eventually failed and rolled back.
    After rolling back, SQL 2008 is continuing to work, but it seems that SSRS was removed. I still have the Reporting Services directory, but the SSRS website is no longer running or accessible on the default port (8080) that it had been running on.
    I had forgotten about the Reporting Services instance and did not back it up.
    Inside the Reporting Services directory there are three directories:
    --LogFiles
    --ReportServer
    --RSTempFiles
    In the "ReportServer" directory,there's a "bin" directory, but nothing else.
    Is there any way to recover Reporting Services at this point without wiping out the existing reports?
    Thanks for any advice.

    Rather than looking at files and folders, try the following:
    1. Start -> Run, type in services.msc and press OK. See if SQL Server Reporting Services is listed, and if it is running. If it is not running start it. Assuming you see the service (even if you are not able to launch it), try the next step.  If
    you don't even see the service listed, your SSRS installation must have gotten hosed somehow.
    2. Launch the reporting services configuration manager from Start -> All Programs -> Microsoft SQL Server 2008 -> Configuration tools and connect to the report server.  Various tabs in the configuration manager lets you observe and change how
    the service is set up.
    If you don't have the reporting services installed as seen in the services.msc, and if you still have the reports, the only option would be to reinstall SSRS and redeploy the reports.
    Thanks Sunita: I do have the service still installed, but if I try to start it I receive an error:
    "Error 2: The system cannot find the file specified"
    If I launch the reporting services configuration manager, it prompts me to select the server (the local server is already selected), but the reporting server instance is greyed out, and if I click "find" next to the server name, I get a popup "Provider
    load failure".
    I can reinstall the reporting services at this point, and try to load the existing dB files...if that doesn't work, I believe the original project files are still recoverable (not easily unfortunately).

  • Can't deleat firefox after failed upgrade

    tried to upgrade, now firefox will not work. It asked to reboot to finnish upgrade. I have rebooted 5 times & still asks me to reboot.

    The first suggestion is to manually install Firefox over your current version. (Download the new Firefox version from http://getfirefox.com and then run the installer - see [[Installing Firefox on Windows]] for details.)
    There are other solutions after that you can try .... the last one is to [[Software Update Failed#w_run-as-administrator|Run as Administrator]].

  • HT4623 I have Iphone 3gs with os42.  After I upgrade to os6.11. I unable active my phone. Please help!

    I have iPhone 3GS with OS4.2.  To, I try to upgrade it with ituon 6.1.1.  After upgrade I unable activate my iPhone.   Then I try to restore back, but after restore, I still unable to activate my phone.   I with T- mobile, but they told me to call Apple.  Please help!

    Your iPhone was hacked/jailbroken in order to unlock to to work with T-Mobile. When you updated it you broke the hack and the iPhone is now locked again to the original cell provider, most likely AT&T.
    You can see about unlocking it with AT&T by using this form, if you qualify: https://www.att.com/deviceunlock/client/en_US/termsAndCondition
    After unlocking you will need to use Google and learn the procedure to clear the unlock hack and Restore it.

Maybe you are looking for

  • Sender Mail Adapter ASMA issue - due to limitation of length upto 200 only.

    Hi, I have a scenario where i have to pull the emails from the mail server using sender mail adpater with XIPAYLOAD as message protocol. Also i am setting the "Set Adapter Setting Messgae Attributes" for retrieving values form header such as SHeaderC

  • Where is "Optimize PDF"?

    I have Adobe Acrobat X Standard, and according to the "Using Adobe Acrobat X Standard" manual that I downloadded from Adobe, this feature should be located in the "Save as.." file menu. It is not. The only option I have is "Save as...> Reduced Size P

  • Continue to Play Music, in Both Accounts

    I'm working on two separate user accounts constantly and combining them is not an option. It's irritating when I switch to the other account and my music stops. Any way to enable access to the playing music on both sides?

  • VPN & BBC iPlayer

    Dear all, I'm looking for a free VPN client I can use for watching BBC iPlayer and other UK channels when I'm out of the contry. I'm not sure how to set it up or even which VPN clint I should get. I'm assuming that the best UI you will get from payed

  • Off topic :Newcomer in Java with Oracle

    Hi Please What books/Forums about Java with Oracle Thank you in advance