3gs cant restore, itunes shows error 1611
3gs cant restore, itunes shows error 1611
APPLE LOGO LOOP
This link should be able to help you out: http://support.apple.com/kb/TS1275
Similar Messages
-
My iPod touch wont restore due to error 1611. Please help.
My ipod touch keeps showing a red low battery. It wont power on. I try to restore it and it says it cant restore due to error 1611. I tried diffident usb jacks. I uninstalled itunes an reinstalled. Among other things. Nothing works. Someone please help. I just want to restore it.
Hey i HAVE/HAD the same problem but right in THIS moment i solved it! And i'm gonna tell you how:
1) You have to uninstall ALL the programs that are from Apple.
2) Go into control panel if you are on a windows and delete everything that says Author (Apple inc.)
3) Here is a list of every thing you have to Uninstall:
Apple application support
Apple mobile device support
Apple software update
Bonjour
iTunes
Quicktime player
Safari
4) After that just go to Apple.com and download the lastest version of iTunes!
5) Install it and sync your iPhone/iPod Touch out of Recovery mode.
i hope that helped you, it sure did to me. bye -
Help, my iphone is in recovery mode, and itunes shows error code 1
help me, please. my iphone 4 is stuck in recovery mode, and when trying to restore, itunes shows " error code 1, an unknown error occurred"
please help!!!me to ;/
[23:05:36.0982] [nand_part_core:INF@2289] first 2 pages of boot blocks written with copies of partition table
[23:05:36.0982] [nand_part_core:INF@3169] next 98 pages of boot blocks written with LLB image of size 150080 bytes
[23:05:36.0982] [nand_part_core:INF@3172] final 156 pages of boot blocks written with random data in full page format
[23:05:36.0982] entering update_gas_gauge
[23:05:36.0982] entering update_ir_mcu
[23:05:36.0982] looking for mcu nub...no entry from path!
[23:05:36.0982] TiSerialFlasher not supported on this platform. Exiting.
[23:05:36.0982] entering update_baseband
[23:05:36.0982] update_baseband: registering for progress notifications
[23:05:36.0982] create_baseband_update_options: Got imeisv: 16
[23:05:36.0982] baseband updater options = <CFBasicHash 0x17533030 [0x59b710]>{type = mutable dict, count = 7,
[23:05:36.0982] entries =>
[23:05:36.0982] 0 : <CFString 0xcf1e38 [0x59b710]>{contents = "SystemRoot"} = <CFString 0x1761cb70 [0x59b710]>{contents = "/mnt1"}
[23:05:36.0982] 5 : <CFString 0xcf1dc8 [0x59b710]>{contents = "DisallowFusiing"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982] 6 : <CFString 0xcf1f48 [0x59b710]>{contents = "autoSetupEnv"} = <CFBoolean 0x59b918 [0x59b710]>{value = false}
[23:05:36.0982] 7 : <CFString 0xcf1e48 [0x59b710]>{contents = "DataRoot"} = <CFString 0x1761e8e0 [0x59b710]>{contents = "/mnt2"}
[23:05:36.0982] 8 : <CFString 0xcf1d98 [0x59b710]>{contents = "forceUpdate"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982] 9 : <CFString 0xcf1f58 [0x59b710]>{contents = "disablePing"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982] 10 : <CFString 0xcf1eb8 [0x59b710]>{contents = "IMEISwVersion"} = <CFNumber 0x17533010 [0x59b710]>{value = +16, type = kCFNumberSInt32Type}
[23:05:36.0982] }
[23:05:36.0982] update_baseband: querying baseband info
[23:05:36.0982] bbupdater: BEGIN: Querying info at stage first
[23:05:36.0982] bbupdater: BEGIN: Preparing first stage
[23:05:36.0982] bbupdater: Requested boot mode: kBBUBootModeNone
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 5...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 4...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 3...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 2...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 1...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 0...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: END(kBBUReturnIOError): Preparing first stage
[23:05:36.0982] bbupdater: END(kBBUReturnIOError): Querying info at stage first
[23:05:36.0982] send_bbupdate_status: sending baseband update status to host
[23:05:36.0982] update_baseband: calling CFNotificationCenterRemoveEveryObserver
[23:05:36.0982] update_baseband: bbupdater error: The operation couldn\U2019t be completed. (BBUpdater error 3 - Failed creating a communication transport to baseband.)
[23:05:36.0982] 0: RamrodErrorDomain/3ec: update_baseband: failed querying baseband info
[23:05:36.0982] 1: BBUpdater/3: Failed creating a communication transport to baseband.
[23:05:36.0982] unable to convert ramrod error 1004
[23:05:36.0982] restore failed with CFError:
[23:05:36.0982] 0: AMRestoreErrorDomain/ffffffff: failed to update device firmware
[23:05:36.0982] 1: AMRestoreErrorDomain/ffffffff: ramrod firmware update failed
[23:05:36.0982] 2: RamrodErrorDomain/3ec: update_baseband: failed querying baseband info
[23:05:36.0982] 3: BBUpdater/3: Failed creating a communication transport to baseband.
[23:05:36.0982] waiting for host to acknowledge final status received...
[23:05:36.0982] void AppleUSBDeviceMuxXXXXXXXXXXXXXXXXXXX(mbuf_t) received reset, closing 0x97b1e4d0
[23:05:36.0982] recv(12, 4) failed: connection closed
[23:05:36.0982] unable to read message size: -1
[23:05:36.0982] received NULL message from host, expected final status
[23:05:36.0982] attempting to dump restore log
[23:05:36.0982] writing log file: /mnt1/restore.log -
my ipod touch is showing the "connect to itunes" screen.. and on connecting to itunes and clicking on "restore" it shows error 3014.. what do i do?
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
Cannot restore my brand new iphone 4s ,got stuck in DFU mode and itunes shows error code (-1) please help?
repeatedly tried from diffierent computers and the same error code pops up (error -1)That's a hardware problem which will require a trip to the Apple store for evaluation, unless your phone has been jailbroken, then it's a corrupt hosts file (and we can't help you with that here as it is against the forum's terms of use).
-
i was restore my iphone 5 but last time itune show error (-1) so how can i solve this problem?
Error -1 indicates a serious hardware failure.
Try restoring the device again, try on a different computer. If the issue continues, take the device to Apple for evaluation and possible replacement. -
HT1414 After restore that showed error code 40 and showed USB connect with itune on touch screen.
My problem
1. can't open my i-phone showed as picture and then i try to restore but showed error 40.
Now still can't swith on my phone.I would like to solve and repair this phone.
Please help me for solve this problem.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
TS3694 i cant restore i get error code 3194
i cant restore i get error code 3194 please help me
Did you actually read the article you linked from?
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
cant open itunes. get error message 7 followed by error message windows error 127. i have redownloaded new updates with luck. window xp
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
My Ipod doesn't want to sync with itunes showing error (-48)
My Ipod doesn't want to sync with itunes showing error (-48).. What can I do cause I can't add songs to the ipod....
If you have not already, shut down your computer. Do this to reset your iPod
http://support.apple.com/kb/HT1320
Start up your computer. Run iTunes. Connect iPod. Try to sync again. -
When I am restoring backup data for my iPhone 4 in the end of back up restore it show error message " back up can't be restored" , please advice what I can do to restore my backup
That usually means that there is something wrong with the backup and it cannot be used. You can try restoring the backup again, but if you continue to get the same message all you can do is restore to a different backup, if you have one.
-
Help,my phone is in recovery mode and iTunes shows error 17
help,my phone is in recovery mode and iTunes shows error 17
http://lmgtfy.com/?q=iPhone+error+code+17
-
Whenever i put my iphone for restoration itunes gives error that disk is full what do i do?
whenever i put my iphone for restoration itunes gives error that disk is full what do i do?
Is your PC disk full?
-
i tried to jailbreak my ipod 4g 6.0.1(523) but was not possible. now i cant restore it becouse say i cant restore my ipod error 3194. i try to edit hosts on win32 but was unsuccesfully. anybody help me please :(((((
Jailbreak discussion is not allowed in forum.
And you have learned the risk of jailbreak. -
HT1414 ipad 2 could not restore and show error 9 ,,,, pls need help
ipad 2 could not restore and show error 9 ,,,, pls need help
Look at error descriptions in 2nd link.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom
Maybe you are looking for
-
MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?
-
How to get the iPhone 5c to pair with my mac book pro and my ue speaker
How to get the iphone 5c to pair with my mac book pro and my ue speaker
-
Hello All, I am facing problem in uploading graphic in smartform. I have to upload signature and its related contact details in smartform. I have maintained signature in z_sign_xxxx format in se78. In smartform i am taking userid of person in z_sign_
-
Iphone Question (backing up mistake)
I have two phones. One I backed up and the other newer work phone I never backed up. I thought I was backing up the newer phone, but now all the older personal phone is on my work phone. What do I do?
-
Power on Plug Support - Mac Mini
Hello all. I was wondering if anyone knows how to implement a power on plug feature with the intel based Mac minis. More specifically, I am trying to get the Mac to automatically turn on after a power outage when power is restored. Many LCD TVs and m