3GS Constant Issues: Application Image Changes/Frozen Apps/Low Signal, ETC

This is my THIRD iphone 3GS! So I would like to know if there is going to be a recall. My battery dies extremely quickly. My application images change and they freeze. I have the iphone 3g and I have great signal strength but the iphone 3gs does not. I have went through the Restore process/not restoring it from the old iphone onto the new (to not have the corrupt data on the new iphone)/ reboot the applications/ restart one by one and still the same issues. I have asked if it is an At&t issue but that would not explain the application image changes or frozen apps. All of my applications are updated... itunes and mac updated. brand new version...
Any one having the same issues?

MissMe09 wrote:
This is my THIRD iphone 3GS! So I would like to know if there is going to be a recall.
It seems unlikely, because many us are having trouble-free 3GS experiences.
The only "solid" rumor is that a new OS 3.1 is in the works.
Phil

Similar Messages

  • I already have changed my apple id. But whenever I update any application, it is asking and using the old app id and password that is not a working e-mail already. How can I change my app id?

    I already have changed my apple id. But whenever I update any application, it is asking the old app id and password that is not a working e-mail already. How can I change my app id?

    So you made a new Apple ID? Unfortunately that won't work. Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one ID to another and Apple does not merge Apple IDs. What should have been doen is mearely change the email address that was associated with the Apple ID.
    http://support.apple.com/kb/HT5621
    The only way that you can do this now is with a new email address if you used your current email address for the new Apple ID.

  • How do i insert a splash screen or a loading screen and a application image for a phone app on Dream

    How do i insert a splash screen or a loading screen and a application image for a phone app on Dreamweaver 6, 5.5 had the mobile application setting that is seemingly no longer present? and i also heard you can use animanted backgrounds on the mobile application in dreamweaver 6 but figuring out how to set the splash screen and application image like it was in 5.5 would be nice. All i can get to pull up is the web application i developed i am trying to build into a phone app on google chrome, if i could officially designate it as a phone app where i can set each splash screen and app image to where it is recognized as a phone app that would be really nice.

    Duely noted, the server will still not connect, so i have left an inquery in the suggested forum.
    Date: Mon, 15 Oct 2012 07:37:34 -0600
    From: [email protected]
    To: [email protected]
    Subject: How do i insert a splash screen or a loading screen and a application image for a phone app on Dream
        Re: How do i insert a splash screen or a loading screen and a application image for a phone app on Dream
        created by David_Powers in Developing server-side applications in Dreamweaver - View the full discussion
    jmed0411 wrote: the phonegap program loads for quite some time and eventually reaches to the unfortunate conclusion that the server cannot be reached and to please try again. Any ideas on how that problem can be mended if the solution is in my hands?? I haven't used PhoneGap Build recently, but I have seen several reports about problems connecting to the server. One suggestion that I've heard is that there has been unexpectedly high demand on the server since the launch of Edge Tools and Services as part of the Creative Cloud last month. As far as I know, the only thing you can do is wait, and try again later. You could also try posting in the PhoneGap Build forum: http://community.phonegap.com/nitobi/products/nitobi_phonegap_build.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4774799#4774799
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4774799#4774799
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4774799#4774799. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Developing server-side applications in Dreamweaver by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Error: Bundler "Mac Application Image" (mac.app) failed to produce a bundle.

    I'm using Netbeans 8.02 with JDK 8 update 31 on Mac OSx Yosemite 10.10.2.  I'm getting the following error when trying to build an application image:
    Creating app bundle: /Users/scottselvia/Documents/JavaFXApplication4/dist/bundles/JavaFXApplication4.app
    java.io.IOException: Exec failed with code 1 command [[codesign, -f, -s, Developer ID Application: , -vvvv, /Users/scottselvia/Documents/JavaFXApplication4/dist/bundles/JavaFXApplication4.app/Contents/Java/JavaFXApplication4.jar] in unspecified directory
    /Users/scottselvia/Documents/JavaFXApplication4/nbproject/jfx-impl.xml:3415: The following error occurred while executing this line:
    /Users/scottselvia/Documents/JavaFXApplication4/nbproject/jfx-impl.xml:3438: The following error occurred while executing this line:
    /Users/scottselvia/Documents/JavaFXApplication4/nbproject/jfx-impl.xml:1465: The following error occurred while executing this line:
    /Users/scottselvia/Documents/JavaFXApplication4/nbproject/jfx-impl.xml:3093: The following error occurred while executing this line:
    /Users/scottselvia/Documents/JavaFXApplication4/nbproject/jfx-impl.xml:2055: Error: Bundler "Mac Application Image" (mac.app) failed to produce a bundle.
    BUILD FAILED (total time: 4 seconds)

    I'm using Netbeans 8.02 with JDK 8 update 31 on Mac OSx Yosemite 10.10.2.  I'm getting the following error when trying to build an application image:
    Creating app bundle: /Users/scottselvia/Documents/JavaFXApplication4/dist/bundles/JavaFXApplication4.app
    java.io.IOException: Exec failed with code 1 command [[codesign, -f, -s, Developer ID Application: , -vvvv, /Users/scottselvia/Documents/JavaFXApplication4/dist/bundles/JavaFXApplication4.app/Contents/Java/JavaFXApplication4.jar] in unspecified directory
    /Users/scottselvia/Documents/JavaFXApplication4/nbproject/jfx-impl.xml:3415: The following error occurred while executing this line:
    /Users/scottselvia/Documents/JavaFXApplication4/nbproject/jfx-impl.xml:3438: The following error occurred while executing this line:
    /Users/scottselvia/Documents/JavaFXApplication4/nbproject/jfx-impl.xml:1465: The following error occurred while executing this line:
    /Users/scottselvia/Documents/JavaFXApplication4/nbproject/jfx-impl.xml:3093: The following error occurred while executing this line:
    /Users/scottselvia/Documents/JavaFXApplication4/nbproject/jfx-impl.xml:2055: Error: Bundler "Mac Application Image" (mac.app) failed to produce a bundle.
    BUILD FAILED (total time: 4 seconds)

  • HT5420 Dyld Error Message:   Library not loaded: @rpath/SFBlocks.framework/Versions/A/SFBlocks   Referenced from: /Applications/iWork '09/Keynote.app/Contents/MacOS/Keynote   Reason: image not found

    I tried to pen iwork but i keep getting this message... Any help please?
    Dyld Error Message:
      Library not loaded: @rpath/SFBlocks.framework/Versions/A/SFBlocks
      Referenced from: /Applications/iWork '09/Keynote.app/Contents/MacOS/Keynote
      Reason: image not found

    Maybe this will help you, too.

  • Can't open the application "Adobe Illustrator CS6.app" because it is not supported...

    UPDATE - Ahhh haaaa!  If I log in with the guest account Illustrator works fine! WTF!? Oh well, at least I have a direction to be working towards, thanks for all the suggestions and assistance Adobe Community!
    That was sarcasm by the way...
    UPDATE - Just installed the latest Illustrator update from Adobe - still not loading. Tried reseting the iMac's PRAM, no luck.
    UPDATE - I've just reinstalled the whole CS6 Suite, and the only things that have changed are that I now have a little white no entry sign over Illustrator (it still won't load) and I also have 1.5GB of application updates to do
    I don't have any direct evidence but I'm guessing this is a Mavericks incompatibility judging by the other issues people are having with Illustrator. Any suggestions are welcome!
    I've been using CS6 on my iMac for the past year (3.2GHz Intel Core i5, 32GB ram).  Everything running fine, no problems.
    Then I get the popup from Apple saying to upgrade to Mavericks, so I did. After updating my Java version, for the next two weeks everything carried on running fine. Until just now.
    I finished working on an Illustrator file, saved it and then exited, only to remember I needed to make one more small change. So I clicked on the AI icon and got this error message;
    'You can’t open the application “Adobe Illustrator CS6.app” because it is not supported on this type of Mac.' Eh???
    I tried doing a reboot thinking that maybe something had just gone wonkey and needed resetting. Still no luck. So I reinstalled Java again. Nope. Then I tried every other CS6 app and they all ran fine.
    Does anyone know what could cause Illustrator CS6 to be working fine for weeks and then suddenly become an unsupported app? These things always happen with you're right up against a deadline! I NEED ILLUSTRATOR WORKING NOW! HEEEEEELLLLLLLPPPP!
    James

    I had the same issue and resolved it
    I first remove the prefs folder and the plist files for illustrator in ~/Libary
    next I logged off,
    then I uninstalled illustrator using the adobe uninstaller(http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html)
    Next I reinstall illstrator
    after that it worked for me.

  • How to include images in my app

    hi all.
    I'm using Apex 2.1 over XE.
    I'm sorry but i can't find any thread related to how to include images in my app.
    I've uploaded several trough shared componentes / files / images, but don't know how to use it, for example, in an HTML region, as header of the page.
    Thanks a lot for your help.
    Fernando

    Hi,
    I have used four different ways to display images in my applications depending on which method is the fastest to refresh.
    1. Under Application Attributes > Edit Standard Attributes > Substitutions enter your substitution string (MY_IMAGE_URL) and substitution value(http://somewhere/img)
    and then in the region or template use the following syntax &MY_IMAGE_URL. in your html tags eg. img src="&MY_IMAGE_URL./banner.png" width="x" height="x">)
    I have found this the best for image refresh speed, especially if the image is already cached.
    2. Load your image up into Apex and don't associate it with any application and use the following tag img src="#WORKSPACE_IMAGES#banner.png" width="x" height="x" alt="">
    Good for development as all images not associated to an application are available.
    3. Load your image up into Apex and associate it with an application and use the following tag img src="#APP_IMAGES#banner.png" width="x" height="x" alt="">
    This can be a pain during development when your application numbers continually change.
    4. Use standard http address <img src="http://somewhere/banner.png" width="x" height="x">
    Ben
    Message was edited by:
    Benton

  • How to change Mac App Store Login for Updating Apps

    I purchased a used Macbook from a local computer retailer; when they installed Mavericks and setup the account they used their Mac ID. Now it's showing updates for Keynote, Numbers, Pages, and iMovie but if I choose Update it prompts their username and wont let me change it. I assume those apps are connected to that account so it wont let me update. Is there a way to change the associated login to mine or is it safe for me to remove them and reinstall using my ID? I wasn't sure if they were core apps that would cause any damage if removed and I really dont want to format and start over. Thanks for the help!

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It is not safe to use a computer with software installed by a previous owner.
    1a. If you don't own another Mac
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    1b. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    2. Partition and install OS X
    If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In thePartition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    3. Other issues
    If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

  • Images Change Colors between monitors while the UI stays the same

    Hey! Im having an issue where photoshop changes the colors when I move the window between my monitors, seen here: http://sta.sh/04y5s60vf3j This isnt due to the monitors themselves being different, it actually changes after a few seconds of moving it inbetween the monitors. The left one has been callibrated with a spyder 3 elite which I no longer have access to. I applied the file with windows color management instead of the spyder utility. The second one is new, and it is not callibrated by anything, but instead was done by hand with the built in brightness/contrast/custom RGB settings. Both of them are very close to eachother, enough so for my tastes. but when photoshop changes what the image looks like, it's causing problems. Interestingly enough, when I disable callibration for the monitor on the left, the image does not change colors between monitors, but instead always appears as it does on the right. but then they don't match up and the whole screen looked washed out because it's uncallibrated, so that doesnt do me any good. Another interesting thing to point out, is when this image is saved as a .JPG, and viewed with firefox the image appears exactly like the monitor on the LEFT (which is my main monitor) despite the left monitor being the one that is force changed. does anyone have any suggestions? It also appears that windows photoviewer is behaving the same way, though firefox does not. Meaning when I open an image in all 3 on the left monitor, they look the same, but when opened on the right monitor, windows photo viewer and photoshop both display the image as brighter and redder than firefox does. This is frustrating, because it seems photoshop is changing the image with my callibration on my left monitor to match what it looks like on the web, which it does. but it doesn't do this for the right monitor, or when the left is uncallibrated. Another issue I can see with this is even if the UI is the same shade of gray, the images are different between the monitors because of this change. Does anyone have any suggestions?
    - BD

    Alright! So I reread through all this, poked at some things on the internet, and I'm going to attempt to summarize what would be a good solution for all this (And it seems, it still won't be perfect, but to get myself into the best environment I can for not messing with images for an hour trying to make them look nice before I post them to the web. I painted something yesterday on the cintiq, popped it over to my laptop screen and it just looked washed out and terrible.)
    1. Get a X-rite EODIS3 i1 Display Pro, Callibrate laptop and cintiq. I do have the money to drop on something like this, especially if it's a time saver.
         Things I'm not sure about:
              a. There was a ton of complaints about the software not working when I checked reviews, but also a ton that said everything was great. most of them were mac users though.
              b. I'm not sure if problems would still be posed, even while calibrated, by me having a wide gamut monitor.
              c. I'm a terrible excuse for a human being and I think the colors showing up brighter on the wide gamut screen is pretty (I should just make my images this bright on a normal screen and there won't be any issues. >.>)
    2. Set Firefox to color manage (easy enough)
    3. Change my photoshop working space to sRGB (since they'll have been calibrated at this point)
    3. Accept the fact that most of the people who look at my work will be doing so on a monitor that is almost certainly uncalibrated, and I can't control what they will see on my screen, but I CAN control if the colors are -actually- what I want them to be on any properly calibrated device. which is probably the best way to go anyways.
    4. Make paintings, have fun.
    Now, you two have been going on about all sorts of interesting things in here, and it seems that calibration issue run much much deeper than I ever thought. Do either of you have recommendations for how I should tweak this list of things to do or other things I can/ should do? I'm not currently a working professional, but if I have anything to say about it, I will be within a few years (I'm going to school for illustration and studying concept design on my own time) so it'd be useful for me to get into good habits now.
    - Brendavid

  • Un-confuse me: sharing images with other apps.

    Hi. I've gotten flummoxed (not unheard of) now that I'm using some of my images in other apps. I would like to understand all of the options/behaviors for moving images from Aperture to other apps.
    My confusion comes from at least three things
    . in Aperture, one has access to both the Master image, and the Version
    . the behavior may change based on the availability of the Master (is it on-line?)
    . Aperture keeps Previews of images, and uses these (sometimes) to share with other apps
    . this behavior changes based on the availability of the Preview (does it exist?)
    . the file format may or may not play a role in having the image show in another app.
    Is the shared image from the Master or a Version? Is it a Preview or something else? Does it have a file format, and if so, which?
    Here is a (partial?) list of how one can share images currently stored in Aperture:
    - Export via Export dialog (creates new file, user sets format and other parameters)
    - Mail direct from Aperture via "{Option}+e" or equivalent
    - Drag to the Finder (or Desktop)
    - Drag to another app
    - Open from another Apple app via the Media Browser
    - Open from another app via the "Media" category is the OS "File Open" dialog sidebar (How does one control what shows there?)
    - Open from another app via the OS "File Open" dialog and select a file currently tracked in the Aperture Library
    What are the differences?
    To cut this down to size -- here is my current need. I am starting to sketch using Autodesk's Sketchbook Pro. I would like to put an Aperture image on one of the layers. All I need is a good web-quality image (and I prefer to avoid large files). What is the best way to do this?
    The Media Browser is not available to Sketchbook Pro. The "Media" sidebar category is there, but often doesn't list Aperture, and often lists an Aperture Library other than the one I want (there does not appear to be a way to switch the Library shown).
    Thanks in advance.
    Kirby.

    FUQuestion: Is there an on-line source for learning/sharing inf. about using/customizing SBP? I am a natural media artist (viscous colored mud, a/k/a oil paint) who recently became passionate about photography, and just discovered drawing with a computer -- and I got baskets of questions about SBP (it is thrilling to use). The AutoDesk SBP forum is moribund. Additional thanks in advance for your answer.
    Kirby,
    I ran into SBP about 1-1/2 years ago when I found Painter to be filled with too much legacy code making it slow. I am an avid Illustrator fan and use it professionally, but it is not great for quick sketching. After checking out ArtRage, I decided to try SBP 2010. IMHO, it is the best program for quick sketching around, bar none.
    Since many consumers are just starting to become aware of it (outside of professional design circles), it may prompt more online resources to begin.
    There are some tutorials here (some or all of which you may already have seen):
    http://www.lynda.com/home/displaycourse.aspx?lpk2=62087
    http://area.autodesk.com/sketchbook/sketch2010prv
    And this link, which requires some additional clicks to land at the tutorial:
    http://www.carbodydesign.com/tutorials/2d/sketchbook-pro-tutorials/
    Here is an older site for the transitional period between Alias and Autodesk ownership:
    http://aliasdesign.autodesk.com/learning/tutorials/?product=7912&mode=7937
    Note - some of these tutorials are the same as other linked sites.
    A great place (IMHO) for art advice and technique is here:
    http://www.conceptart.org/forums/
    Hopefully, the program will promote more online resources for free.
    Have fun!

  • TS1702 Hi, I'm experiencing a problem with app I've just purchased from iTunes, I have tried every piece of advice from the "iOS: Troubleshooting applications purchased from the App Store" and still nothing is working. I would like to get my refund on thi

    Hi, My name is Bheki Yende
    I'm experiencing a problem with an app I've just purchased from iTunes, I have tried every piece of advice from the "iOS: Troubleshooting applications purchased from the App Store" and still nothing is working. I would like to get my refund on this pls.
    This is an inconvenience, I don't understand why I have to contact the developer for a faulty product in your store.
    I've paid iTunes to get this, so iTunes must fix this problem for me or give my money back.
    Thanks

    This is a user forum, you are not speaking to Apple here.
    You will need to contact iTunes support here, regarding this issue. They will usually respond within 24 hours.

  • TS3274 Images of the apps in App Store not showing plus images in some apps

    The images of the app in the App Store not loading and images in apps that are already loaded not showing, the text and everything else is fine only the images are not loading..?

    Hi, Pepe6. 
    Thank you for visiting Apple Support Communities. 
    I would recommend closing all applications in multitasking and power cycling the device.  Test the App Store after processing these steps. 
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Cheers,
    Jason H. 

  • You can't open the application "Adobe Illustrator CS2.app" because PowerPC applications are no longer supported.

    You can’t open the application “Adobe Illustrator CS2.app” because PowerPC applications are no longer supported.
    what can I do?

    Adobe Creative Suite 2 (CS2)'s Photoshop running in Snow Leopard Server installed into Parallels 8 for use in Lion or Mt. Lion:
                                  [click on image to enlarge]
    Apple is now selling Snow Leopard Server for $19.99 + sales tax & shipping costs at 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only).  Smarmy, self-important forum members will have to pay extra!

  • I need to get the logs of my iPhone 5. I'm a registered as a developer and I have an issue with one of my app which is already in the market

    I need to get the logs of my iPhone 5. I'm a registered as a developer and I have an issue with one of my app which is already in the market

    The Firefox 3.5.x branch has reached end-of-life and is no longer maintained.<br />
    You will no longer receive security updates.<br />
    You can update Firefox via "Help > Check for Updates" or download and install the latest Firefox 3.6.x.<br />
    Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • Why does the color and or tone of my image change?

    Why does the color and or tone of my image change after working in LR for a couple of hours? I open LR and everything looks fine - work for a couple of hours on the same shoot - but then the pictures start to look flat or greenish cast as time goes by. All the files get flat and the greenish cast after a couple of hours - the ones already worked on and the newer ones I'm pulling up to work on. RAW files downloaded from a Canon 30D. Also exporting to PSCS2 as PROPhoto results in a flat image. I switched back to export AdobeRGB.

    Hola - thanks for the reply - yep - closing and then opening LR helps - but can't do that all the time after processing 3 or 4 files.
    One reply was a corrupt monitor color profile - So I deleted that one and loaded a new adobeRGB profile. That helped a little also for a while - I then reloaded my monitor drivers and refreshed them - that help for a day - the greenish cast is back It works fine on my laptop for now. The same pictures that look greenish in LR look great in Canon DPP. So it probably wasn't the color profile or monitor drivers. My issue started with the small scale previews so I bumped that up. Still have the issue. I finished up a project and now going to uninstall and reinstall LR. Let's see what happens with a fresh install. andy.

Maybe you are looking for