3GS issues regarding LCD and repair

Hi all,
I do iphone repairs in New Zealand and thought I would report on something I've been seeing.
There are grave issues concerning the LCD in the 3GS (which is different than the 3G LCD)
One is that the connector is very easily damaged, which is not true w/ the 3g LCD connector. So if you snap it on and off several times while doing a repair it will quit working. Still looks perfect but dead. And its 3x as much as the 3g LCd
Also, the 3GS LCD seems to run at a higher voltage and, when wet (never a great idea), burns up the motherboard where it controls the LCD backlight. The 3GS batteries seem to be running over volage as well - 4v - and that makes a deadly combo. In one week, is saw three 3GS w/ no backligh - otherwise perfect. One was 3 days od, 32gb.
Something to keep in mind. I would not recomment the 3GS for anyone who does a lot of outdoors.

Hi,
Best way to put a bug in Apple's ear and provide feedback go here.
iPhone Feedback
Carolyn

Similar Messages

  • Issue regarding discount and tolerance days

    Frnds
    i have below situatiion.
    we have pmt term 1% 10 days, net 30 days, client wants to take discoutn even after the discount period expires.
    let say, discount expires on 10/04, still they wan to take discoutn on 10/07 pmt run. as i know we can do it by putting 3 dasy in tolerance days field in FNZP config. and that would add 3 days in payables also.
    i havenot issue in that but if i put 3 days in Tolerance days field, then it will add 3 days for all the vendor invoices.
    thats wht i dont want to do for Non discounted payment term, like Net 30 days
    adding 3 days in tolerance days in FBZP it iwill *** 3 days for above Net 30 days also.
    wht so i need to do to not to add tolerance days in Non discounted payment term.
    i know i can set up tolerance group for vendor and specify Grays days there but it is working for only Manual payments not for automatic payment.
    can some one please suggest how can i exclude non discounted payment term from assing extra days?
    any thoughts will be appreciated.
    Thanks

    Hi Matt,
    Create a new payment terms and key in the this term only for this customer master data. the problem will get solved if you change the existing payment term it will affect all.
    Remeber, the new term will work only on prospectve basis.
    Regards
    Bharat

  • I have a number of serious issues regarding LPX and need to contact Apple, info welcome

    Hi Apple Community,
    I have been using LPX for a few weeks now and I have run into a large number of issues, some of which are completely game-breaking. I was shocked to see that there is no support contact at Apple for Logic Pro- I was simply redirected here.
    My issues include-
    Logic's visual meters lagging while 3rd party AUs cope just fine
    Several severe instances of automation triggering late, particularly and somewhat cripplingly involving the gain plugin (and yes I do have sample accurate automation on the correct setting)
    Inconsistent behaviour playing back samples in library (samples will sometimes not play at all and I have to press keyboard shortcut again, or sometimes will play after a 1-2 second delay)
    Windows simply disappear after changing desktop 'spaces' and must be maximised by right-clicking icon in dock
    Plugin windows are sometimes unresponsive and must be closed and reopened
    Upon googling I found this post over at gearslutz.com-
    http://www.gearslutz.com/board/logic-pro-x/855046-logic-x-9-automation-completel y-broken.html
    It seems this very experienced user has done some thorough testing and discovered massive problems with Logic's automation and plugin delay compensation. Not good.
    I'm sure I need not go into detail about how difficult these issues are to work with collectively. I would greatly appreciate some time from an Apple employee regarding these matters.

    Dan
    I would greatly appreciate some time from an Apple employee regarding these matters.
    Just so you are aware why asking for help directly from Apple here will not achieve that aim, please read the following...
    https://discussions.apple.com/docs/DOC-5671
    Other users like Pancenter, will try to help as best they can, here...but as for Apple itself, you need to contact them directly rather than via this forum.

  • Issues regarding update and ovi mail

    hello there,i am using c6 00 for about 9 months .everything is fine as of nw.but recently due to a faulty app i have reset the phone to its factory defaults.and after that the problem started.fyi its symbian 5th and it has all the latest updates till date.prior to the reset.the ovi mail feature was wrkng fine.as u kne its under e mail -new a/c -select the servise provider like gmail,hotmail etc.so sftr the reset i tried to set up email a/c.evry other service provider is showing a small widget whn i click on them...such as gmail-id-pass-accept the terms-setting up mailbox-finisn.but whn i try to enter my ovi mail credentials its not showing the widget...instead of that it opens and redirects to ovi webpage.the widget for ovimail has vanished and even after if i try to enter my credentials on that ovi webpage,it will confirm the mailbox and says next.upon hitting next it says configuring ur mailbox and all of a sudden the internet connection disconnects by itself for 5-6 secs and comes up again.and by that time it says failed to configure the mailbox.try again later.i dnt knw why this is happening coz i dnt face any prblms with other mail a/c setup.only whn i try to configure ovi mail it redirects to a webpage instead of widget.need help coz all my imp mails are there.and fyi have checked frm diff source that is there any prblms with the ovi a/c.everythng is fyn apart frm this configuration issue.checked for any recent updates regarding ovi.but evrythngs fine.help me pls. thanks in advance..and also i have 1 query about symbian anna.can i upgrade sym 5th to anna?and how?

    Try a Nokia Care Center to get an update.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Issue Regarding Training and Event Management

    In development system we are unable to book resourses to business event.This is happening because of inactive tab resourse selection under tab Edit. Also this can not be done through pp01.
    Please suggest solution for this problem
    Thanks.
    Edited by:

    Hi,
    Please make sure that you have carried out both of the steps below:
    1. Via t-code PSVR create resource hierarchy (resource types and resources)
    2. Via t-code S_AHR_61011888 : For the relevant business event type create the relationship "Requires - A022" between this business event and the resource type you want to assign.
    Then you will see "Resource selection" as activated.
    Regards,
    Dilek

  • Issue regarding Full and Delta InfoSpoke

    Hi Experts,
    I have created 2 Infospokes Full and Delta to extract data from DSO to SQL server, the settings in both the InfoSpokes are identical except for the extraction mode. However, the delta InfoSpoke is pulling the correct number of records from the DSO (360 records), but the full InfoSpoke is extracting only 196 records. I also tried loading the DSO using both Full/delta Infopackage and Full/Delta DTPs but still the results were same. Can anyone tell how this issue can be resolved.
    Thanks,
    Rajan

    Dear Rajan,
    I'd try to help you about your question,
    Your case it's curious, did you check the filter in both InfoPackage?, try to delete and create them again (it is very important check whole filter). Otherwise, I suggest use Open Hub Destination which BI 2004s have the same functional (export data)
    I hope this suggestion can help you,
    Luis

  • Question about security issues regarding 'cp' and 'mv'

    Ok, I wondered about how 'cp' and 'mv' are really working. I have some guesses but I need these things to be confirmed.
    Here is what I have:
    A partition with a unix file system, say ext2 or 3 (does this make a difference here?) containing *very* sensitive data. The filesystem is encrypted (whirlpool/serpent) but that shouldn't matter. As I do not want corpses of dead files lying around that could be recovered, I always use 'shred -zu' with 26 passes to overwrite and then delete the data.
    And that's where I have my conceirns:
    If I want to rename a file or move it to another folder on the same partition. Is it save to 'mv' it? Or should I 'cp' it and then 'shred' the original file. I assume that 'mv' will not touch the actual file and just tell the file system of it's new name or place in the folder-structure. Given that, shredding a 'mv'ed file should not leave a trace of it on the drive (except of the old filename before the 'mv' maybe, but that wouldn't be too critical). I assume that, because it's the only thing that would make sense to me, but have to know it for sure!
    However, on moving the file to another drive I should probably 'cp' it, then 'shred' the original file. The question I have here is as follows:
    How much information which could be recovered leaves 'cp'ing in my RAM? Will I have to find a way to somehow shred the information in the RAM or can I assume that my RAM get's rewritten often enough, that most traces will be gone, say, in a couple of days?
    If you have links at hand to confirm your answer, please post them, too.

    Okay, thanks for that, I will have a closer look on flushing the ram.
    Sure, I care about security and privacy, but -- as you might expect -- the data I have are not really THAT sensitive/confidential/whatsoever. I've just gotten into it somehow and now I'm just curious/intrested in improving it for it's own sake more or less.

  • Issue regarding the Finder

    I went to the Disk Utility and performed a "verify disk permissions", after which I ran the repair disk permissions. After that it said something was modified and it would not be repaired.
    I've been having some odd issues lately, namely, System Preferences and Adobe Acrobat Reader hanging on me. Then it prevents me from shutting down properly.
    Does anybody know what is happening and how I might resolve the issue below?
    01/12/08 8:51:23 PM Disk Utility[166] Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
    01/12/08 8:51:31 PM Disk Utility[166] Group differs on "private/etc/cups", should be 0, group is 26.
    01/12/08 8:51:31 PM Disk Utility[166] Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .

    mjrblood wrote:
    I went to the Disk Utility and performed a "verify disk permissions", after which I ran the repair disk permissions. After that it said something was modified and it would not be repaired.
    I've been having some odd issues lately, namely, System Preferences and Adobe Acrobat Reader hanging on me. Then it prevents me from shutting down properly.
    Does anybody know what is happening and how I might resolve the issue below?
    01/12/08 8:51:23 PM Disk Utility[166] Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
    01/12/08 8:51:31 PM Disk Utility[166] Group differs on "private/etc/cups", should be 0, group is 26.
    01/12/08 8:51:31 PM Disk Utility[166] Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    First "verify" is a total waste of time - - either do nothing or repair, but never verify. Verify is pointless.
    Those messages are to be ignored and have nothing to do with your shutdown issue.
    A quick search of these boards will reveal dozens of threads about the SUID and cups things.
    Ignore them. As they say, they are "warnings" not errors and have been around since an early Leopard update.
    Look in your console logs for the real issues regarding Acrobat and System Preferences hanging up.
    Check your login items.
    Create a new user account and see if the hangs occur with the new account.

  • Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

    Gurus,
    I am facing an issue regarding SAP TPM IP ( HANA)
    I have 3 Infoproviders
    Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
    Issue is  Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
    I tried debugging it and found it is trying to read   i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
    The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated.  So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
    Can any one help,it would be really help.
    Thanks
    Ashok

    Hello Gregor,
    On the launch of planning layout it throws an error message:
    Planning is not possible RSCRM_IMP_CORE008.
    When I debugged, i got to a point wherein
    particular Real Time Planning DSO is
    not getting retrieved under the MultiProivder in below class.
    Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
    returning the real time Info-Provider Name(i.e. Planning DSO)
    underlyingthe Multiprovider.
    I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
    Let me know, if you have any pointers on this topic.
    Thanks,
    Jomy

  • Have an issue regarding library books. My ereader is validated with Kobo account and Adobe Digital Editions account, but I get an error: 'this document is protected bij DRM and isn't available with your Adobe ID'.

    Have an issue regarding library books. My ereader is validated with Kobo account and Adobe Digital Editions account, but I get an error: 'this document is protected bij DRM and isn't available with your Adobe ID'.

    same problem for me. I am using abe edition 3 as I don't think 4 can be used with kobo. Book has been downloaded to kobo but it can't be read as it is not authorised.Help please

  • Payroll issue regarding the Claims - /561 and /563

    Hi Payroll Experts,
    I have a payroll issue regarding the Claims - /561 and /563 (October PY Run)
    When i m runnning the Current month Payroll(October PY Run), Total Earning - total deductions are not matching with Net Pay. later i came to know that the system creates the WT /561 and deducts from the Net Pay.
    But as per the Employee Payment Details , there is no recovery required from the employee for the past one year. But even then the system creates the WT /561. and deducts the same from NET Pay.
    The followng are the WT details
    IN - Period
    OCT 2011
         /101 Total gross amount     118,897.00
         /110 Net payments/deductions     76,070.00-
         /550 Statutory net pay     95343
         /551 Stat.net recalc.diff.     37,692.00-
         /552 Stat.net subs.adjustment      37,692.00-
         /559 Bank transfer                                                   34,317.00
         /560 Net pay     37,218.00
         /563 Claim from previous month     5,609.00
    FOR Period
    Sept- Oct
         /101 Total gross amount     49,213.00
         /110 Net payments/deductions      31,721.00-
         /550 Statutory net pay     41,529.00
         /551 Stat.net recalc.diff.     14,591.00
         /552 Stat.net subs.adjustment     23,101.00-
         /553 Recalc.diff.to last payr.     37,692.00
         /559 Bank transfer                                                   14,591.00
         /560 Net pay     14,591.00
         /561 Claim     5,609.00
    I request  some body to  throw siome light on the same.

    Hi Experts,
    Thanks for everyone for replying to my query ,
    I have a doubt that If you check the WTs /551 and /552  in the IN PRD, the negative sign is coming for both the WTs
    Is it correct?
    And also, Assume that there may be a master data changes like Bank details and other deduction Wts happened in the month of Aug and now i m going to run the payroll for the month of Nov,
    some of the employees having differences in the Net Pay, Eventhough the employee is having sufficient balances.
    So how do i handle this issue
    IS ther any way to solve this differences?
    Please Let me know how to solve this issue.
    Thanks

  • I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it

    I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it

    If you just got it back and it isn't fixed or something else is wrong with it take it back and have them do the repair correctly.

  • HT1365 Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

    Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

    The figures you mention only make sense on your intranet.  Are you still using the same wireless router.  The verizon one is somewhat limited as far as max wireless-n performace.  For one thing it only has a 2.4 radio.   I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.

  • Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue?

    Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue and if i must, how dI reintall iTunes without loosing my content?
    P.S. I am able to sync postcasts and music though!

    http://support.apple.com/kb/TS3694
    http://support.apple.com/kb/TS3125
    http://support.microsoft.com/kb/299357

  • Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

    Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

    Well!
    If you have ThunderBolt, I would go with such for an External Working Drive, spinning platter or SSD depending on your budget
    This does not have to be huge just big enough to house your most current Jobs
    Once the Current Job is put to rest I would move it to a larger multi bay hard drive unit, USB or FireWire nothing fancy, no RAID, set up as one single Disk
    This would only be accessed when something is needed from a past Job so the connection does not have to be speedy
    The Drobo would be relegated to Vaults and backups
    You can set up a Vault on the Drobo to back up the External Working Library and then Reconnect it when you have moved the Library over to the other Enclosure
    This has worked for me pretty smoothly for a long while, but I have found over the years that one can not assume all people work in the same manner! :-)

Maybe you are looking for