3GS No Longer Senses Orientation After iOS4 Install

After loading iOS4, my 3GS no longer senses the rotation of the phone in Photos, Safari, etc. I can not view these apps in landscape mode with the iPhone rotated on its side. However, when I take a photo in portrait and landscape orientation, the photo is recorded in the correct orientation. So, the inertial sensor still works but the hooks to the aforementioned apps appeared to have failed. I tried rebooting and reseting the phone without luck. I also closed all multitasked apps. No joy. Any ideas?

Is the orientation locked (strange icon near top-right)?
<http://www.tipb.com/2010/05/04/iphone-os-4-orientation-lock-ipod-controls-fast- app-switcher/>

Similar Messages

  • Very long shutdown time after Yosemite install

    After installing Yosemite my Macbookpro has shutdown times of over more than 5 minutes. This is what i got from Etrecheck.
    Problem description:
    very long shutdown time after yosemite install
    EtreCheck version: 2.1.8 (121)
    Report generated 19 Feb 2015 01:19:39 CET
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,2
        1 2 GHz Intel Core i7 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 868
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 512 MB
        AMD Radeon HD 6490M - VRAM: 256 MB
            Color LCD 1440 x 900
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: one day 7:40:33
    Disk Information: ℹ️
        Hitachi HTS545050B9A302 disk0 : (500,11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 498.88 GB (90.86 GB free)
                Core Storage: disk0s2 499.25 GB Online
        MATSHITADVD-R   UJ-898
    USB Information: ℹ️
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
        LaCie LaCie Device 500,11 GB
            EFI (disk2s1) <not mounted> : 210 MB
            MINI DAVID HDD (disk2s2) /Volumes/MINI DAVID HDD : 499.76 GB (62.48 GB free)
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
        /etc/sysctl.conf - Exists
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/Karabiner.app
        [not loaded]    org.pqrs.driver.Karabiner (10.2.0 - SDK 10.9) [Click for support]
            /Library/Parallels/Parallels Service.app
        [not loaded]    com.parallels.kext.prl_hid_hook (7.0 15106.786747) [Click for support]
        [not loaded]    com.parallels.kext.prl_hypervisor (7.0 15106.786747) [Click for support]
        [not loaded]    com.parallels.kext.prl_netbridge (7.0 15106.786747) [Click for support]
        [not loaded]    com.parallels.kext.prl_usb_connect (7.0 15106.786747) [Click for support]
        [not loaded]    com.parallels.kext.prl_vnic (7.0 15106.786747) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.Avid.driver.AvidDX (4.7.1) [Click for support]
        [loaded]    com.Cycling74.driver.Soundflower (1.5.1) [Click for support]
        [not loaded]    com.SafeNet.driver.Sentinel (7.3.0) [Click for support]
        [not loaded]    com.avid.driver.Avid_SCSI (1.2.0) [Click for support]
        [not loaded]    com.avid.driver.Avid_SCSI_RBC (1.2.0) [Click for support]
        [loaded]    com.cisco.kext.acsock (1.1.0 - SDK 10.2) [Click for support]
        [not loaded]    com.digidesign.fwfamily.driver (8.0.4f1) [Click for support]
        [not loaded]    com.digidesign.mbox2.boot.driver (8.0.4f1) [Click for support]
        [not loaded]    com.digidesign.mbox2.driver (8.0.4f1) [Click for support]
        [not loaded]    com.freecom.driver.BoulderScsi (1.0.0d1) [Click for support]
        [not loaded]    com.metakine.handsoff.driver (2.0.8 - SDK 10.6) [Click for support]
        [not loaded]    com.nvidia.CUDA (1.1.0) [Click for support]
        [not loaded]    com.paceap.kext.PACESupport (5.7.2b8) [Click for support]
        [not loaded]    com.paceap.kext.PACESupport2 (5.7.2b8) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.master (5.7.2b8) [Click for support]
        [loaded]    com.rogueamoeba.HermesAudio (3.0.1) [Click for support]
        [not loaded]    com.sony.filesystems.pdudf (4.03.0d006 - SDK 10.6) [Click for support]
        [not loaded]    com.sony.filesystems.pdudfr (4.03.0d006 - SDK 10.6) [Click for support]
        [not loaded]    com.sony.scsi.PDW-U1 (4.03.0d006 - SDK 10.6) [Click for support]
        [not loaded]    com.wacom.kext.pentablet (5.3.5 - SDK 10.9) [Click for support]
            /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
        [not loaded]    com.paceap.kext.pacesupport.leopard (5.7.2b8) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.panther (5.7.2b8) [Click for support]
        [loaded]    com.paceap.kext.pacesupport.snowleopard (5.7.2b8) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.tiger (5.7.2b8) [Click for support]
    Startup Items: ℹ️
        ciscod: Path: /System/Library/StartupItems/ciscod
        CUDA: Path: /System/Library/StartupItems/CUDA
        Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
        DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
        PACESupport: Path: /Library/StartupItems/PACESupport
        ProTecVb: Path: /Library/StartupItems/ProTecVb
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Daemons: ℹ️
        [unknown]    c om.apple.coreservices.appleevents.plist [Click for support]
        [unknown]    c om.apple.diskarbitrationd.plist [Click for support]
        [unknown]    c om.apple.mDNSResponder.plist [Click for support]
        [unknown]    co m.apple.securityd.plist [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [loaded]    com.cisco.anyconnect.gui.plist [Click for support]
        [running]    com.epson.epw.agent.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.metakine.handsoff.agent.plist [Click for support]
        [loaded]    com.nvidia.CUDASoftwareUpdate.plist [Click for support]
        [failed]    com.parallels.desktop.launch.plist [Click for support]
        [loaded]    com.parallels.DesktopControlAgent.plist [Click for support]
        [running]    com.parallels.vm.prl_pcproxy.plist [Click for support]
        [running]    com.wacom.pentablet.plist [Click for support]
        [running]    net.culater.SIMBL.Agent.plist [Click for support]
        [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [failed]    com.autodesk.backburner_manager.plist [Click for support]
        [running]    com.autodesk.backburner_server.plist [Click for support]
        [failed]    com.autodesk.backburner_start.plist [Click for support]
        [running]    com.cisco.anyconnect.vpnagentd.plist [Click for support]
        [running]    com.digidesign.fwfamily.helper.plist [Click for support]
        [running]    com.edb.launchd.postgresql-8.4.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [running]    com.metakine.handsoff.daemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [running]    com.parallels.desktop.launchdaemon.plist [Click for support]
        [loaded]    com.rogueamoeba.hermes.plist [Click for support]
        [loaded]    com.rogueamoeba.instanton-agent.plist [Click for support]
        [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
        [loaded]    PACESupport.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    User Login Items: ℹ️
        Google Chrome    Application Hidden (/Applications/Google Chrome.app)
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        Google Earth Web Plug-in: Version: 7.0 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flip4Mac WMV Plugin: Version: 2.3.8.1 [Click for support]
        WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        SharePointBrowserPlugin: Version: 14.3.8 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User internet Plug-ins: ℹ️
        Picasa: Version: 1.0 - SDK 10.4 [Click for support]
    Audio Plug-ins: ℹ️
        DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
        CUDA Preferences  [Click for support]
        DigidesignMbox2  [Click for support]
        Digidesign Mbox 2 Pro  [Click for support]
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        MacFUSE  [Click for support]
        Perian  [Click for support]
        PenTablet  [Click for support]
        XDCAM Drive Monitor  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: ON
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 498.88 GB Disk used: 408.02 GB
        Destinations:
            Time Capsule [Local]
            Total size: 799.52 GB
            Total number of backups: 18
            Oldest backup: 2014-11-12 02:44:18 +0000
            Last backup: 2015-02-17 14:14:45 +0000
            Size of backup disk: Too small
                Backup size 799.52 GB < (Disk used 408.02 GB X 3)
    Top Processes by CPU: ℹ️
            20%    mds
             5%    WindowServer
             2%    Google Chrome
             1%    launchd
             1%    prl_disp_service
    Top Processes by Memory: ℹ️
        515 MB    Final Cut Pro
        378 MB    softwareupdated
        309 MB    Google Chrome
        215 MB    Google Chrome Helper
        206 MB    mds_stores
    Virtual Memory Information: ℹ️
        220 MB    Free RAM
        3.56 GB    Active RAM
        3.34 GB    Inactive RAM
        1.45 GB    Wired RAM
        7.56 GB    Page-ins
        4 MB    Page-outs
    Diagnostics Information: ℹ️
        Feb 18, 2015, 04:35:18 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-163518_[redacted].crash
        Feb 18, 2015, 04:29:01 PM    /Library/Logs/DiagnosticReports/backburnerManager_2015-02-18-162901_[redacted]. crash
        Feb 18, 2015, 04:11:30 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-161130_[redacted].crash
        Feb 18, 2015, 04:04:44 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-160444_[redacted].crash
        Feb 18, 2015, 01:49:37 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-134937_[redacted].crash
        Feb 17, 2015, 05:36:32 PM    Self test - passed

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Shut down from safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Tie Machine  no longer backs up after lion install

    After Lion install, Time Machine no longer backs up-will start to back up but freezes after a few kb's-spinning clock will spin 24/7 but backup is stalled

    See the green box in #D2 in Time Machine - Troubleshooting.

  • It is taking too long to login after i installed kaspersky

    MY macbook air was working fine but after i installed kaspersky internet security and restarted it is it taking too long to login.. What do i do?

    Try restarting in Safe Mode: Starting up in Safe Mode
    Try disabling your Login Items: If you think you have incompatible login items
    Both are temporary measures. Either one may allow you to log in so that you can uninstall Kaspersky. If you are unable to log in write back for additional instructions.
    To reboot normally restart your Mac and log in without holding any keys.

  • Iphone 3gs no longer will work  after iOs5 update,comes up with message ' there is no sim card installed in the phone. Can anyone help me please. I am working as a volunteer in a remote location in Asia and no where near an Apple shop etc?

    I have tried to  update my 3GS phone and now it longer works as it comes up with message there is no sim card installed in the phone. Can anyone help please as I am no where near technical support as I am working as volunteer in remote Asian country

    Hi Allan,
    Thanks for asking, I knew I had forgotten to mention something. The phone was indeed unofficially unlocked, since there were no apple stores or even premium resellers in the region I lived in during the given procedure had to be done.
    I understand this could be a further complication, especially the fact the home button does not work. However, I was wondering if there would be a possibility to use a third-party application instead of iTunes to restore the iPhone? IF someone does know of such an application, I could easily solve further problems myself. Basically, the main issue here is my lack of ability to enter DFU mode.

  • IPod on 3GS iPhone crashing after iOS4 install

    Anyone else having this problem?
    Upgrade went smoothly. But I cannot use the ipod on my iPhone. It loads and then quits after a second or two.
    I've shut down and restarted my phone, I've even done a hard reset by holding down the power and home button for 10 secs. Still no joy.
    Any help is appreciated.

    Also having this problem. I should've noticed something was up when I ran some errands and noticed my 3 podcasts were gone. But I was able to listen to an album, so I shrugged and figured the podcasts were a casualty of the upgrade.
    I re-downloaded those pods later. Went to listen to them and the podcast section of the iPod was still empty. iPod crashes. I re-open and try to see if the music still works. Crashes again, and has been crashing since.
    These podcasts keep downloading successfully, but I have no idea where they're going.

  • ITunes no longer displays CDs after latest install

    I've seen similar older questions, but  I haven't seen an answer that works yet.
    I Just installed latest iTunes SW (12.1.x?) on 2/28/15.  Now iTunes does not display (or ask to display/import) a CD when I insert one (or have one inserted).  (My preferences are still set to ask to import a CD when inserted.)  iTunes has the same issue with both of my drives.  Windows Media Player can play CDs from either drive just fine - so its not a problem with the drives.  When I run iTunes diagnostics, iTunes recognizes my drives and gives them both  'green' status... however - they still don't show up in iTunes (when CDs are in them).  iTunes seems to be working fine other than this.  (I'm able to sync to my devices, play songs, etc.)
    There's an articles I found on trying to repair 'missing drives' (iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install - …)  And I tried the steps here even though its not exactly the same issue.  (I removed than 'reinstalled' the latest Gear driver; I verified I don't have either of the  afs.sy, afs2k.sys conflicting drivers.)
    I'm running Windows-7 64-bit.
    I have not tried to uninstall/reinstall iTunes... [yet].
    Anyone having the same issue?

    Thank you so much for your responses.  I greatly appreciate it.  I wish Apple was as responsive as you.  I also wish it was easier to find out how to actually file a bug report with them.
    My first PC was back in the 80's.  I made sure to have a 5.25" floppy drive since 3.5" was still new.  It was a fancy PC back then, with the 3.5" on my A: drive and 5.25" on B:....   Styling.  The PC I run iTunes on now is about 4-5 years old, (about 25 years newer than my first one) and has up-to-date BIOS, Windows 7, etc.  I built it myself with whatever was pretty much top-of-the-line at the time.
    I don't doubt that even Windows 7 still has some ancient A;/B: drive issues lurking about.  I was nervous about that when I changed my optical drive letters to use them a month ago.  No other software, including Windows Media Player, had any issue, so there didn't seem to be a problem.  I feel like I'd ripped a CD into iTunes since I changed the drive letters, but I must not have.  Unfortunately I updated iTunes right before trying to import a new CD I just bought, which led me to believe the update was bad... especially after seeing several 'similar' issues from other users who updated to iTunes 12.1.1.4 (including your original comment).  I suppose my bad, for not fully checking out using the old reserved drive letters when I changed them.
    I still consider this an Apple iTunes bug (even though I'm sure there's plenty of blame to share with Windows).  Since ALL my other software is fine with the drive letters there's no reason iTunes - as big as it is - shouldn't also be.  AND there's no reason iTunes shouldn't warn about this when Run Diagnostics is run from iTunes.  Run Diagnostics DOES recognize the A:/B: drives, but does NOT report any error on it.  This would have been no issue at all if their diagnostics software identified that iTunes still has an issue with the historic drive letters instead of just reporting that everything is OK.
    Hopefully Apple browses through these forums.  I 'think' I found a place to report the BUG to them last night, but they don't make it easy to find that through their contact pages that kept bringing me back to the phone number web page.  (Sorry for the rant... I'm just frustrated cause I wasted so much time on this, and even more time on my previous issue with iTunes stealing some music from me that I had purchased and saying i didn't own it any more even though I still have all the receipts... I'm really about to give up Apple completely - I already moved to Amazon for digital downloads due to Apple's music theft.)
    Anyway I'll consider this issue closed when Apple fixes it (either by accepting the old reserved drive letters, or by updating their Run Diagnostics)... in the meantime, I have an easy, though undesirable, workaround in using alternate drive letters.
    Again.  Thank you for your help.  Your responses helped push me to find the real issue and a workaround.  I truly appreciate it.

  • Safari no longer loads bookmarks after Leopard installed

    I've recently upgraded to Leopard but since the upgrade I can no longer get to my bookmarks in Safari. I suspected that the file containing the bookmark info may have become corrupt, but after importing the file into Firefox, the bookmarks work fine. The problem seems definitely with Safari. Anybody experiencing the same problem? Any solutions?

    Use Pacifist to re-install Safari part of Leopard.

  • Time machine no longer a "timemachine" after re-installing Leopard

    Time machine worked fine on the first install but I had some network issues like not being able to connect to my iMac G5 from a Windows PC. Mac support suggested reinstalling Leopard after all other suggestions failed. Now, when Time Machine application is enabled it no longer lists a time table. Only "Today" and "Now" is shown and no times. The restore function does not work either. Disk repair utility has not been able to correct the problem and there are no Time Machine .plist files in Library preferences either. How do I correct or fix Time Machine?

    I am having similar issues with TM. After spending close to 3 hours on the phone yesterday with apple tech support and a product specialist, I was able to temporarily resolve the issue (disappearance of my external hard drive icon on the desk top and in finder). I asked the specialist if I should just disable TM and not use it until Apple provides a fix to all of the problems, but all he could say was, I can't advise you on that. I have turned TM off, but did not deleted the TM files from my external HD and the problem started again this morning. I need to go into Monitor to fix this, but forgot the codes they gave me to fix this problem, so i have to call in again!

  • Time Machine no longer backs up after archive & install

    I have just had something mysterious happen to my Macbook - it spontaneously shut down, then wouldn't restart past a gray screen with Apple logo. After trying every troubleshooting page I could find, I ended up doing an archive and (re)install of Leopard on my hard drive. (btw, I ran the Disk Utility hard drive diagnostic, and it said the HD is fine, though I'm skeptical because it's making new noises I've never heard before.)
    I finished that install, restarted, everything seemed fine, and I re-connected the external hard drive that had been used for my Time Machine backups before. Now, every time it attempts to back up, it's stuck on "preparing" for 30 minutes, then starts copying SLOWLY and the progress bar says "6 KB of 10 GB." Well, I have a lot more than 10 GB to back up. Then the process halts and I get an error message: "Unable to complete backup. An error occurred while copying files to the backup volume." And I can't get any more specific information about the error - can't find a log file or anything.
    I know that there's a troubleshooting article about Time Machine issues with only backing up 10 GB, but mine doesn't even get that far, and besides, this is not my first Time Machine backup - I have no other external drive big enough to transfer my older data to while I reformat this drive as the support article suggests.
    I was thinking that perhaps a system setting got messed up somehow and that maybe I should just forget this archive & install thing I did and instead do a fresh erase & install on my Macbook hard drive and then restore from Time Machine's old backup (a day or so before my Macbook started acting weird). But 1. would that make a difference? And 2. if Leopard gives me an error while backing up in Time Machine, what if I do the erase & install and I get an error trying to restore from Time Machine? That would be a nightmare.
    My Macbook has always been so reliable - I'm very confused about what's going on! Any help would be appreciated.

    Hmm; the external drive had no errors, according to Disk Utility.
    Here are the time machine logs from Console:
    1/13/08 12:14:47 AM com.apple.launchd[1] (com.apple.backupd[301]) Exited abnormally: Bus error
    1/13/08 1:10:28 AM com.apple.launchd[1] (com.apple.backupd[430]) Exited abnormally: Bus error
    1/13/08 2:21:23 AM com.apple.launchd[1] (com.apple.backupd[519]) Exited abnormally: Bus error
    1/13/08 4:12:57 AM com.apple.launchd[1] (com.apple.backupd[612]) Exited abnormally: Bus error
    1/13/08 5:22:59 AM com.apple.launchd[1] (com.apple.backupd[818]) Exited abnormally: Bus error
    1/13/08 6:24:00 AM com.apple.launchd[1] (com.apple.backupd[915]) Exited abnormally: Bus error
    1/13/08 7:24:52 AM com.apple.launchd[1] (com.apple.backupd[1012]) Exited abnormally: Bus error
    Also, I tried to repair permissions on my internal drive and I got the following error messages:
    Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
    Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
    Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

  • Can no longer print wirelessly after SL install

    I cannot wirelessly print to my Xerox Phaser 6130N following installation of Snow Leopard. I downloaded the 2.0 version of the driver from the Apple site, which enabled my MacBook to recongize the printer (finally!) when I hooked it up via USB. But printing wirelessly is no longer possible. Anyone have any suggestions?

    Just to be clear here, there are several cases we are talking about
    1) A USB printer hooked up to an Airport base station (or other network device that provides a USB print spooler).
    2) A printer with build in Ethernet connected to your network.
    3) A printer with built in Wireless connected to your wireless network.
    Option 2 or 3 should work for any functioning print driver as long as that print driver is configured for a network interface. In the case of the HP printers, any printer that has build in networking the drivers are automatically configured this way.
    Option 1 is a bit more confusing. As pointed out first, your printer driver must be enabled for networking, even if your printer doesn't have a network interface on it. We have in the past had drivers go out without this flag checked. There are no Snow Leopard drivers in this category (that I am aware of). The other problem that lots of people seem to be running into is that printing to a USB printer attached to an Airport seems not to be working for people who do not have actual Snow Leopard drivers. Unfortunately there are some HP printers that fall into this category.
    That being said, InsaneMisha, your Officejet 6500 does have Snow Leopard compatible drivers, and since it is a network device, we can't turn off the network interface. So, if you can provide more details of what your problem is I may be able to help. And note to solve the problem may require re-installing the drivers.
    Just trying to help.
    Andrew

  • Why does my iphone 3gs turn off then on after I installed IOS 6?

    Hey, right now my battery is dead on my iphone 3gs. When i plug it in it shows the apple( to show that its turning on) then it turns off. It repeats this constantly until I get frustrated and unplug it. I tried to plug it into itunes, to restore it, on my macbook pro but it doesnt show, and it just reapeats the turning off then on process.
    Someone PLEASE HELP!

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Try this First... You will Not Lose Any Data...
    Turn the Phone Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

  • Text replacements no longer working correctly after Mavericks install.

    Since upgrading to Mavericks (MBA2011 13inch) only a select few of the text replacements still work. For example, I can still write (c) and tm and have them change to what they should be, but the fractions, and custom ones like gmc, omw, or the apostrophe ones no longer are substituted. I tried deleting them and entering them again, but it does not work. They worked fine in 10.8, and I didnt change them until I noticed it had stopped working. Any ideas?

    I have also noticed new in Mavericks is that if you type something that can be text substituted and you stop at the last character, a small box with the replacement pops out with the option to cancel the replacement, similar to how it works in ios.
    However, I still have my problem where only certain susbstitutions work and exhibit this, while others do nothing ever.

  • Safari extremely slow after Yosemite installed

    It seems that websites are taking extremely long to load after I installed Yosemite and updated Safari.  Any suggestions on what to do and what is causing this?

    hi i had your exact same problem
    only thing that could solve this was backing up my files and do a clean install, and then update back again
    and now everything works just fine

  • App Store on 3GS crashes when trying to install apps after iOS4

    Is anyone experiencing this too? Every time it tries to install an app from the 3GS, it bombs out to home. Installing through syncing with iTunes on my iMac works fine however... no more installing free useless apps on the move for me... have to do it on the mac... stupid really!

    Same problem here on 3GS with 4.01.
    I can update apps, but if I try to buy/install a new one, the app store promptly crashes.
    Any ideas?

Maybe you are looking for