3GS with Incase Slider dropped 4 feet onto NYC Cement

Hello Everyone,
A couple days back my iPhone 3GS flew out of my back pocket while going for a mid air chest bump with a fellow gentleman.
It had the Incase Slider case on it with 'shock absorbing' tracks inside of the case.
There was no cosmetic damage to the phone however it suffered a loud smack on some NYC cement and made my heart stop.
If any damage were to have occurred inside what components are most susceptible to damage and how could I test their health?

asilagy wrote:
Does anyone know the name of a utility which could test these things?
I don't think you have much to worry about, the iPhone probably passes some drop tests that exceed what you did. If you had dropped it into a puddle of water, you'd be out of luck. With the case on it, and I know the Incase Slider is solid, I doubt anything bad will happen. Relax.

Similar Messages

Trying to drop files onto a droplet that is already in progress with another file.

I'm trying to find a way to drop a file on a droplet and before the action of that droplet finishes, drop another file on the droplet and have a queue or some other way of photoshop recognizing and processing the second request once the first has finished. Currently PS CC 2014 just ignores the second file. I think automator must have a way but have been messing around to no avail.

Ah, I see now what you mean, Marc but I don't know an answer.
Maybe you could try and see what happens if you make two or more droplets
(with identical contents but a different name - so you can put them in the
same place). Not sure if this is even possible but maybe worth trying...
Met vriendelijke groeten,
Ronald
2015-03-17 21:16 GMT+01:00 marcimpact <[email protected]>:
Adobe Community <https://forums.adobe.com/?et=watches.email.thread> Trying
to drop files onto a droplet that is already in progress with another file.
reply from marcimpact
<https://forums.adobe.com/people/marcimpact?et=watches.email.thread> in *Photoshop
General Discussion* - View the full discussion
<https://forums.adobe.com/message/7309203?et=watches.email.thread#7309203>

Incase slider 3GS replacement?

Ive searched high and low for an answer, not sure if this is the right place the post this.
Im in the UK and bought the incase slider from the apple website last week.
The bottom section doesnt fit right, its far too tight and after doing some internet research ive discovered this is a common problem and that some of the incase slider cases are tighter than others... and I should call apple and get a replacement.
Last wednesday I phoned them and arranged a replacement.
I was told I'd get an email confirmation, and that somebody would phone me with in 24 hours to arrange to collect my current case.
Its now Sunday and ive had to email or phone call.
No idea what to do and there phone support isnt on over the weekend which I think is great! hehe
Anybody with a similar experience in the past?
Shud I wait a cuple more days?
Cheers

One more time, apparently you are having a little difficulty with posts today. The OP, in his first post said: "...and bought the incase slider from the apple website last week."
Which would mean he purchased it from the Apple ONLINE Store. Unless he becomes a virtual person he will have a hard time going back to the Store where it was bough. The other poster had the right answer, call or email the Apple Online Store and check on it.
I'm not in the UK and I do typically return products to the store where I bought them. Unless I bough them online, where I have to do it through shipping, or if it was purchased at Fry's where they direct me to deal with the manufacturer.

Incase slider case with a screen protector....

I was wondering if anyone has the Incase Slider case yet...and if so, is anyone using a screen protector with it? If so...which one are you using and do you have any issues with getting the case on with a screen protector on? The reason I'm asking is because I was using the ifrogz luxe case and I could not find a screen protector that I could get the case on without the screen protector coming back up at the edges. I now have the Incase Slider case and before I waste anymore money trying to get another screen protector, I'd like to find one that works without coming up at the edges. Anyone have any recommendations on what is working for them? Thanks in advance!

i just recently bought the incase slider since they are new to market for the iPhone 4. when i bought the incase slider from best buy i also purchased the zagg invisible shield and i asked if they could install it for me cuz im bad at doing those kind of things and the guy from best buy mobile said that he would be more than happy to install it. It costs another $8 for them to install it for you (generally takes 15-20 min to install but they do a really good job). By the time he finished i had to wait a day for the invisible shield to fully dry but once it was i slid the incase slider case on my iPhone 4 and it fit perfectly without the screen protector coming up.

I cannot transfer music to my 3gs with itunes

I cannot put music on my 3gs using itunes. All I get is a no entry sign and a message that says tunes cannot be transferred to this iphone. What am I doing wrong?

Are you using automatic or manual transfer of media? If you never remeber changing it, you are on automatic. You can switch it by going to your iPhone's summary page and unchecking the box mentioning media management. What I can tell you is that you have much more control over your media this way. It doesn't matter if a song is checked or not, to put on music, you plug in, find the song you would like to add, and just drag and drop it onto the name of your device on the iTunes sidebar. You should not be stopped this way. By the way, incase you don't know, hold down Ctrl to select multiple songs to move, and hold Shift to select all the songs between the two songs you select.

How can I sync my iphone 3gs with iTunes?

How can sync My iPhone 3Gs with iTunes? My phone is activated, but not in service. It's connected to my computer and I have downloaded iTUNES onto my PC?

Please use the confidential forums created for this purpose:
iOS 5 beta

Can't drag and drop files onto Applications in Dock since upgrading to 10.6

Ever since my wife upgraded her iMac (2 GHz, 2 gigs) to 10.6, she can no longer drag and drop files onto certain applications in her dock to open the file. She has to go into the application and go to "open file" or whatever.
For example, if she has a Word doc on her desktop, she cannot drag it onto the Word icon in her dock.
Any advice?

You have many issues with your and your wife's machine(s). Everything you've posted works here. Reinstall Snow Leopard, repair permissions, and see if that fixes things.

Drag and Drop Files Onto EXE Icon

I was wondering if there is a way to have the user drag and drop files onto the .exe icon and this would initiate the program to do something with those files automatically?
For example: Some PDF convertor programs allow you to drag and drop documents, images, etc. directly onto the PDF convertor icon on your desktop and it will automatically convert them all to PDF's, without the user even having to open the program.
Can this same type of functionality be done with a Labview EXE file?
Solved!
Go to Solution.

Thank you! That did it.
The only side note that I would include to others that are trying this is to make sure you have the "Pass All Command Line Arguments to Application" box checked in the "Advanced" section when you build the executable.

HT1386 Where do you drag and drop playlists onto iphone in new itunes

Where do you drag and drop playlists onto iphone in new itunes

I don't blame this person whatsoever for making the assumption that the iPod portion of his phone would work similarily, if not the same, as the iPod.
But it does work the same as the iPod. As with an iPod, you can sync all songs and playlists, or selected playlists, or you can manually manage music and videos. You can also select sync only checked songs and videos under the Summary tab and uncheck the songs in your iTunes library that you don't want transferred to your iPhone. This can be used with syncing selected playlists - if you want to remove a song from your iPhone that is in a selected playlist without removing the song from the playlist in iTunes, you uncheck the song in the playlist in iTunes followed by a sync. There is no difference with an iPod in this regard except for the iPhone not supporting disk mode.
In order to manually manage music and videos with an iPod, you must select this under the Summary tab for the iPod sync preferences, and the same for the iPhone.
And if you resent his rant, why respond and waste your volunteer time on this post?
I can waste my time anyway I see fit. If you don't like it, don't respond.
And not everyone can afford to replace this type of investment on a whim.
Copied from the OP's post.
Don't tell me it's clicking on the boxes next to the songs in the Library page, *because that's when I will start asking for my money back...*
Or the iPhone can be sold to someone else with the proceeds used to purchase a different phone. I haven't read any reports about someone having trouble selling their iPhone used at a good price even if damaged.

HT201210 screen is in a zoom mode and will not open with the slider

Hi, my iphone 3gs screen has gone into a zoom mode and will not allow me to switch on with the slider, or decrease the zoom. When first activated the screen is normal for a second, then zooms in and becomes inoperable, if anyone has any ideas, would be much appreciated, cheers John.

Double-tap the screen with three fingers. Then go to Settings>General>Accessibility>Zoom and turn it off.

Export to Quicktime and Flash Fail Slide Dropped

I am using the latest keynote. We wanted to use it to add an audio track to each slide to we could post the presentation on the web using flash or quicktime. I imported the slides from power point presentation my boss has had for awhile.
We successfully added the audio for each slide and are very pleased with it playing the sildeshow with keynote. When we export to flash or quicktime. Keynote has dropped the third slide in the presentation but not the audio that went with it. We are left with an out of sync presentation that is useless to us. There does not seem to any way to edit the audio or drop the slide from the presentation without doing the audio all over again.
From what have read here it seems to be an ongoing problem. Anyone else having the same problem? Any fixes.
Joe C

Hi,
my problem is nearly the same: QT Export drops every slide - keeps only the first, second and last slide. Export to flash comes with every slide but looks horrible. Every else export works fine (Web, pdf, etc.) What is it? Any Ideas?

Finder - Can't drag and drop files onto stacks on the desktop anymore.

Hi,
This might sound like a strange question but in the past I was able to select a group of files in a window and drag that group to the desktop where they would stack upon one another creating a neat stack of all the files in one place. Now when I do this they drag onto the desktop and remain spread out all over the place. It's not terribly difficult to deal with except if I'm dragging say, 30 photos onto the deskop. Before they appeared stacked upon one another and I could simply drag one off the stack one by one. I am however experincing harsh symptoms of OCD because I can't figure out why. My co-worker's Mac is the same as mine (both running 10.8.2) and his files stack just fine.
I've done a fresh install after having no luck and it's till doing it.
This is really bumming me out. Any suggestions are very welcome. I've even booted into safe mode and it still won't stack drag and dropped files onto the desktop.
Thanks for any advice,
-Jason

Relaunch Finder and restart Mac OS X. See if this helps.

Iphone 3gs stucked on slide to emergency lock screen

i updated my iphone 3gs 4.1 to 5.1.1 but it stucked on recovery mode then i restored it from itunes(itunes said that it will update iphone to latest version but it updated it to ios 4.3.5)however to when it completed the restore my iphone starts and stuck on lockscreen and instead of "slide to unlock""slide to emergency" is written and itunes logo and usb cord is also on lockscreen and in tunes it was written that "the sim card inserted in this iphone does not appear to be suppoted"please tell me what can i do

Same problem is occuring here.
When powered on and slid to unlock phone will work fine (if the phone is not unlocked immediately and the screen is allowed to turn off before unlocking, step 2 happens immediately).
If the phone is allowed to lock itself and I try to unlock it will "freeze" with the slider all the way to the right.
It remains at this screen for around 2 minutes until the screen goes black and the loader image displays in the middle of the screen (the same display as if you switch the phone entirely off by holding down the power button)
The phone remains here for around 30 - 60 seconds and then will reboot.
Go back to number 1.
Any help on this would be appreciated.

Unable to drop nodes onto a line.

Hello Everyone,
I'm hoping someone can help me with this. I've got a situation where I'm unable to drop nodes onto a line. I'm having to manually connect them at each point. The Tutorial tells me that when I drag a node over a line the node in and out should highlight and at that point I can release it and it will automatically connect onto the tree. Although this did work with the trial version it is not working with my purchased version. Most likely I've dissabled the option without knowing it. Can't find the solution in any of the manuals. Thanks for any help.

> Man, I STILL do that... then wonder where everything
went!!
Well, now I know you do it, I don't feel so stupid when I do it!
. . . But isn't it great when you hit the space bar again . . . and everything comes back!
Andy
G5 Quad 8GB. 250, 500 GB HDs. G-Raid 1TB. FCP 5.1.1. Shake 4.1. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Incase Slider - Gun Metal

Just picked up the Gun Metal incase slider today for my 3GS. This case is flippin' sweet! Love the look and feel while holding it. I had an old Slider for my 3G that was hard as **** to get off, this is not that way. Just wanted to comment, very nice case!

Jerryb wrote:
Hi
I have a black slider for my 2g iPhone. I took it off a couple of months ago to clean the phone and noticed that a few grains of sand had gotten into the case at some point. I golf so I do occasionally spend some time in the sand!!
lol, i try to stay away from the sand but my ball still finds it sometimes.
i have the black Incase Slider for my 3GS and LOVE the tight fit. it doesnt move and i like how the case is really thin. i also got some plugs for my USB power plug and headphone jack so no dirt/lint can get anywhere.

3GS with Incase Slider dropped 4 feet onto NYC Cement

Similar Messages

Maybe you are looking for