3gs wont turn off or restart, but will sleep after the minute that is set on my auto-lock
Has this ever happen to any one?
You could try holding the Home button and the on/off buttonfor 10 seconds, which should do a hard reset, unless obviously you've already tried that.
Eventually the phone will run out of battery and will obviously automatically turn off. When this happens you can try and turn it on again (after plugging it in to charge) and see if the phone turns on and off ok.
Similar Messages
-
my friend just called me in a panic saying herm power book went to sleep when she was at school and when she came home it wont turn on or restart even when you take the battery out.
Well, if there is no power than how is it going to start? With the battery in & the power cable plugged in, try to turn it on. When the powerbook goes to sleep and the battery runs out, it'll still be on but you won't be able to wake the computer up because there just isn't enough power. But, when this happens, you can plug in the power cord then press the power button in order to wake it up. If what I said doesn't work, then there is probably a bigger issue.
-
I have tried to update my i phone 4 to version 5, but it came up with the error message of 1603 during , and asked if i wanted to continue which i did , but it has now frozen with the apple logo on the front and a bubble underneath it?? it wont turn off , sync or do anything??? help???
See here - http://support.apple.com/kb/TS3694#error1603
-
I no longer have the PC that I set it up with. How do I update?
You have no choice but to use iTunes on a computer if you want to update. You can update on any computer running iTunes, but you will lose everything on the iPad unless you can back the iPad up on that computer, restore from the backup when you are done updating and then download all of your content again.
-
Computer keeps crashing. Took it back to authorized seller and they changed the ram, but continues to crash. Will be in the middle of any program and screen will black out,go back to restart. Very confusing as it's top of the line iMac.
This all started when my phone carrier remotely accessed my computer though to fix an unrelated problem.
Could this be the glitch?Computer and OS info, please. Then, provide a crash report.
-
recently there has been a turquoise/ red horizontal line that appeared on my screen. i turned my iPod off but the line appeared again after about 5 minutes...how do i get rid it?
Try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If you still have the problem that indicates that you have a hardware porblem and an appointment at the Genius Bar of an Apple store. -
My ipod wont snyc to my computer but it charges on the cord that connects to the computer
My itouch isn't syncing on my computer through the cord that connects to the computer. My computer wont ever reonize that my ipod is even threre, although it will charge it only whats wrong with my ipod?
Try a hard reset and go from there.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
my ipod touch power button is pushed in and wont let me turn it off. i unplugged my usb and tried to go into recovery mode but it just wont do anything..just keeps saying ipod disabled connect to itunes.but it wont even open cause its locked.how can i fix this
- Try placing the iPod in recovery mode using this program and then restore
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Next let the battery fully drain. After charging for an least an hour try the above again. -
I have done this and turned it to false (hope that's right)
• In the URL bar, type about:config
• Type geo.enabled
• Double click on the geo.enabled preference
• Location-Aware Browsing is now disabled
But google is still putting me at a location unsuitable for my browsing requirements. I want to browse .co.uk not .fr. for business as well as personal. Please help it is very time consuming even when I type .co.uk google changes it back to .fr
Any help gratefully received. Thank you."Location-Aware Browsing" is only useful if you connect via a wireless access point.<br />
Otherwise a reverse DNS look up of your IP is used and that is usually not very accurate.<br />
Firefox will always ask for permission before using Geolocation.<br />
* http://www.mozilla.com/firefox/geolocation/
* http://en.wikipedia.org/wiki/Geotagging -
Does anyone know what to do?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
I have check for a virus, via AVG; none found on a scan of the whole computer.
I have called up Firefox at least twice to reach UWO & its Convergence pgm to get my mail. Convergence asks for my security password. I have entered it very carefully several times on two separate tries of Convergence, & it is not recognized. The only thing unusual that has happened is the Firefox crash immediately before I called up Convergence. I think this password is a Firefox thing, required whenever the site wants a password.
What do I do now?Firefox shouldn't require to enter a password to start, so if you need one then you may not have the official version from the Mozilla servers.
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
My iphone 4s turns off and restarts itself a few seconds or minutes after when I establish a FaceTime call. I've tried "Restore iPhone" from iTunes but the same thing keeps happening. Any solution?
Settings > General > Reset > Reset Network Settings
Also, if this only happens with one Wi-Fi network, power cycle that Wi-Fi router.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order. -
MY MAC WONT CONNECT TO MY WIFI BUT WILL CONNECT TO OTHERS
My imac wont connect to my wifi but will connect to the person downstairs from me. it works once and a while but never for more then a few mins...could it have something to do with the router?
Hello Trey,
Without knowing anything about your WiFI system, my opinion is that your wifi signal is either, weaker than your downstairs neighbor, or more likely, your wi fi system is suffering from interference. The first thing you should do is change the channel it is operating on. See if that helps.
I tend to think it is not the router, but can only offer a guess, since you did not describe your system. -
HT201210 phone is frozen, wont turn off, wont restore
my i phone 5 is frozen wont turn off or restore. shows a pic of the i phone symbol and the cord to connect. i have tried many time to restore via i tunes wont do anything
See this discussion: https://discussions.apple.com/thread/5269891
-
IPhone won't turn off and won't sync even after I plug in my computer.
My iPhone started acting odd after my husband updated it to iOS5. It started with when I touch the apps, it responded with delay. Today, when I want to check my email. The app just simply not responding to any touch on the screen. I tried to turn off to restart, but it won't turn off. So I plug in my computer try to sync see if that can somehow makes it "budge". I successfully upload the new photos from iPhone to my MacBookPro, but after that, it won't "sync". The "sync" bottom on the itune page stay "gray". I cannot click on it. What should I do?
Try a Reset...
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons..
http://support.apple.com/kb/ht1430
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore from Backup... Restore as New..
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137
Maybe you are looking for
-
Drill down in custom draft report
I am creating a custom report for just draft Inventory Transfer. SELECT 'Transfer' AS 'Document Type', T0.[DocNum] AS 'Document Number', T0.[DocDate] AS 'Ship Date' FROM [dbo].[ODRF] T0 WHERE T0.[ObjType] = 67 AND T0.[DocDate] <= CAST(FLOOR( CAST( G
-
Downloaded images appear dulled in IPhoto
When I view photos on the Panasonic DMC-TZ3 camera they appear bright and gorgeous, and as they are downloading into IPhoto, when the jpg file is downloading and on screen for a few moments, it is also bright. However, when I then view the images in
-
Can we connect Mapview to multidimensional database and retrieve data
I have zero knowledge on MapViewer and hence I am curious to know, if we can connect MapViewer to multidimensional database(Like Essbase etc...) and retrieve data from them ???
-
i think it could have been with quicktime?? When i click for program's preferences the program hanges...it requires multiple Force Qits
-
Goods movement : posting periods
Hi, In goods movement, i am getting an error: "Posting only possible in periods 2007/05 and 2007/04 in company code 1200. Does anyone know in which transaction i need to fix this?