3kei Transaction code issue.

Hi all,
assume that in 3keh t.c. they have maintained the account intervel is 1-100. and in the transaction code 3kei, they are maintaining the derivation rules for company code wise. so they have used this same account interval in 2910 company code and 2800 company code. now the user is asking to delete the 35 account and 45 account form the company code 2800. when i tried to change the account interval in the derivation rule of 2800 company code as like this 1-34, 36-44 and 46-100, it is showing the error is
"Account interval does not exist for additional accounts in EC-PCA
Message no. KM 542
Diagnosis
You want to define derivation for an account interval. However, the account interval S880150200 through S881999999 is not defined in the "Additional balance sheet/profit and loss accounts" for actual postings in controlling area CODA.
System Response
You can only maintain derivation for account intervals that have been defined in the "Additional balance sheet/profit and loss accounts".
Procedure
Check the account interval in Customizing for Profit Center Accounting".
so i can't change in 3keh transaction code the account interval because is is beeing used in another company code is 2910.
cany any body tell me how to solve this.
Thanks and Regards
Navuluri Rao.
Edited by: navuluri rao on Jun 2, 2010 6:55 AM
Can any body give me the solution please.
Thanks and regards.

this problem is solved. User accepted to delete the whole account interval group from 3KEI table.

Similar Messages

KKBC_HOE Transaction code Issue

HI,
I need to execute a KKBC_HOE - With Defined Summarization Hierarchy report in product costing for variances.while doing this system is asking to give Hierarchy & Subhierarchy.when try to select from the system it is giving the below error.please provide me the detail to create the Summarized object.
Summarized object does not exist: CO
Message no. KN020
Diagnosis
You have not carried out summarization for this order hierarchy or cost object hierarchy. For this reason it is not possible to display any information on node CO .
Procedure
Carry out order summarization or cost object summarization. Then call up the function again.
Thanks
Sunitha

You need to create Summarization levels for viewing reports at Summarization levels.
You can do that at Accounting->Controlling->Cost object controlling->Product Cost by order->Information system->Tools

Authorization access Issue for Transaction Codes PA10 to PA40

Hi Experts,
I have created Custom role for accessing ALL HR Transaction codes in IDES System and added to the user & Tested.
All transactions codes are working fine except PA10,PA20,PA30 &PA40
We have new installation of ECC6.0 (HR) IDES System.
I am new to HR Security.
Here anything needs to configure in HR System for accessing transaction code PA10 to PA40.
Please help me regading this.
Advance Thanks,
BBC

I have checked in SM01, Transaction codes PA10 to PA40 are not locked.
We are facing two issues
1) when accessing T- Codes PA10 to PA40, System showing message: You are not authorized to use Transaction code.
Thatz the reason i suggested you to check with basis consultant. Becuas he is the power user he can only see that from his window all the autharizations
May be you checked from your user your user might have autharization. that user might be end user who getting msg might not have authorizatoins.
2) function module : HR_READ_INFOTYPE.
When Debuging this, It calls internal FM
HR_CHECK_AUTHORITY_INFTY and returns exception
no_authorization=1
See this means that that user have NO autharizatoins
Best Regards

Transaction codes for goods issue,Initial inventory,purchase contract......

hi experts,
            can any one know the transaction codes for Goods issue,Initial Inventory,
purchase contract,billing data and the table name in which inactive vendors and active vendor are available.
                      thanking you

Hi,
     mb5b, mb51 for goods issue
MI01 for Initial Inventory
ME31K for Purchase Contract
MIRO for Billing data
in SAP easy access
under Financial accounting >Accounts payable-> information systems-->masterdata report
you can display blocked vendors also as a list there using those reports.
the vendors which are blocked are inactive vendors
<b>Reward points</b>
Regards

PFCG issue - removing transaction codes from menu and not clearing up the authorization tab

I’m using SAP ERP version ECC6 and EHP5 and also we have updated our system with the PSCD FI module.
I’m having the following issue in PFCG transaction code - I have created a new single role by copied other or from scratch and added few transaction codes into the menu. After that, I went in the authorization tab using the "Change Authorization Data" and I felled all the missing information until the role was green out. I generated the role then I totally went out. I come back to the same role that I created earlier and I did removed all the transaction codes from the menu and I did find the following:
- the Authorization tab light didn't change from green to red
- I went into the Authorization tab by "Change Authorization Data" and a part of the objects were still in.
Normally behave should be:
- when we remove one transaction code from the menu the light from Authorization tab should change from green to red. When you empty the menu then the light color should change also, but the authorization tab should be also empty.
Could please give me some idea how to do it next?

Hi Gabriela,
Most of the times standard roles contains manually added authorization objects. When ever you are creating a new role by copying the existing standard role so by default, these objects will come in to new role.
Now, coming to your role. After removing t code from role if nothing has changed in Authorization tab means.
Here are the possible reasons.
1. The t code which you have removed might not have any checked and maintained authorization objects, that's why your Authorization tab still in unchanged.
2. Rememeber, when ever you are adding or removing t code from menu always use expert mode for profile generation option along with "Read old status and merge with new data" Option.
This will bring the all checked and maintained data for each t code.
3. After removing the t codes from menu and if you generate the Authorization tab by using expert mode option still if you find authorization objects means, those are manually added authorization objects that's why those were not removed.
I hope this will give some clue to your issue.
Thanks,
Siva

Issue in transaction code creation for sap query report .

Hi Gurus,
I have a requirement to create transaction codes for sap query reports. I found two ways to create transaction code for sap query report
1) By Generating program for sap query report and creation of transaction code for that generated Program. in tcode.
2) By using parameter transaction options in start object of se93
What are the difference between creation of these two ways. Please specify the advantages and disadvantages of both methods.
Regards,
Suneel Kumar Uggina.

Hi Jogeswara Rao,
But I am getting problem while transporting form development system to the production system. After transporting to Production system I have used the code created in development system, but it is giving Error ' No Program Found for that Transaction Code. And I would like to know on what conditions should I have to use the First one and as well as a second one in sap query reports.
Thank You,
Suneel Kumar Uggina.

Authorization Issue for Transaction Codes PA10,PA20,PA30 &PA40

Hi Experts,
I have created Custom role for accessing ALL HR Transaction codes in IDES System and added to the user & Tested.
All transactions codes are working except PA10,PA20,PA30 &PA40
Please help me regading this.
Advance Thanks,
BBC

Hi,
I had check with basis Team, they told that I have all authorizations.
This is New Installation for R/3 HR IDES System. even basis Team also created role for above transaction code but not getting access.
We can accesss all transaction codes except these.
All are new for HR. here anything needs to be configure for access PA10 to PA40 Transaction codes.
Please advice me.
Thanks & Regards,
BBC

Transaction variant issue (T-Code SHD0)

Hi,
I am trying to create a Transaction variant for T-Code SM30 for providing row level filter to a particular View.
During recording when I select the radio button - "Enter Conditions" on the selection screen of sm30, it doesnt reflect in the recording. Also all the options corresponding to radio button are disabled. Let me know for further clarifications.
Also please let me know if there is any other workaround for providing row filter to a table View.

Hi,
Even though question is already marked as answered, I think that Pince Kummar requirement was not fulfilled.
Those are the steps that you should execute:
1. Create a Selection Variant:
In FBL1N transaction, enter your required field values, and click on the save icon. Maintain variant attributes as you need. Assign to your selection variant a name beginning with CUS&. With that prefix you specify that is a customer system variant.
2. Assign the created selection variant as default for tcode FBL1N.
Go to SE93 and change FBL1N, on "Start with variant" field select your created CUS& variant and save.
At this time you can notice that FBL1N transaction always begin with your selection variant.
3. If you also want to disable Dynamic selections function, you should create a Standard transaction variant.
Go to SHD0, enter the transaction code name (FBL1N). In the Standard Variants tab enter a name and choose create function. Automatically FBL1N selection image will be showed, click back button to return. In the screen that now is showed, choose "Menu Functions" and enter Program "RSSYSTDB" and gui status "%_00" and click Menu Functions, then in the tree that come out, find and select Dyamic Selections function (%_00->Edit->DYNS), next click disable button and then continue button.
Now you return to Transaction variants maintenance screen. Make sure that in deactive functions list, for Dynamic selections function is only active "For Transaction" check box. Now save and activate your transaction variant.

Error in transaction code MB01

Hi,
While doing th goods receipt for a Purchase order in MB01 transaction code , I am getting error message as "Inconsistency between a document field and profitability segment number "
Here account assignment category of PO is - All aux.acct.assgts.
Item category is : Third party.
Please help me in this issue.
Thanks,
Usha.

Hi Can you please explain me how to check this inconsistency for G/L account.
I found the G/L account for that perticular company code and valuation area.
Please explain me .
Thanks ,
Usha.

Regarding Transaction code sxmb_ifr in SAP XI

HI friends please help me on the below issue. when i logon to my SAP XI GUI and when i click on the transaction code sxmb_ifr, then my default browser is not opening automatically. My O/S is linux.and i already installed java web start also.please send me any document regarding this issue.

Hi,
Have u added the Hostname of the XI in the following path
C:\WINDOWS\system32\drivers\etc
open hosts file with notepad and add the ip address hostname of XI
Ex: 10.2.1.122 XIServer
Also see this guide
Regards
Seshagiri
Edited by: N V Seshagiri on Feb 28, 2008 12:50 PM

Excise Invoice tab In MIGO transaction code

Hello
Could any body suggest, In Excise Invoice tab In MIGO transaction code I am getting "06 No Excise Entry" no otehr fields are coming.? All options like
01     Capture & Post Excise Invoice
02     Refer & Post Excise Invoice
03     Only Capture Excise Invoice
04     Only Refer Excise Invoice
05     Only Part1
Should come. Infact in my SAND Box client it is o.k but with same setting Golden Client it is not coming.?
Thanks & Regards
Sudhansu

Hi,
These options are coming from Excise Group settings.
Go to : SPRO-Logistics General-Tax on Goods movements-India-Basic settings-Maintain Excise Groups-in 'MIGO Settings' tab, select the check boxes, accordingly you will get the options in Excise Tab of MIGO screen.
Hope this will resolve your issue.
Regards,
Gopi Chand

Error exec. Background Mode a Batch-Input using KP26 Transaction Code

I have a program that build a Batch-Input based on transaction code KP26.
I encounter the following error :
Field Z-BDC02(1) is not an input field (Program : SAPLKPP2 Screen : 0112)
When executing in background I got the error and when executing in Foreground, it is OK.
I use SHDB to look at the field needed and it gave me the same field to use.
Here is an extract of my program for the field I have the issue on :
    PERFORM F100_BDC_FIELD USING 'Z-BDC02(01)' I_T01-LST.
    PERFORM F100_BDC_FIELD USING 'Z-BDC05(01)' I_T01-SPRED.
    PERFORM F100_BDC_FIELD USING 'Z-BDC07(01)' I_T01-TOV.
    PERFORM F100_BDC_FIELD USING 'Z-BDC08(01)' I_T01-TOF.
Any one have an hint to solve this ?

Hi,
Just one remark: batch input is always executed in synchronous mode (hopefully, otherwise we would get many lock issues during mass updates!) Or is there something I missed?
Same thing when you use BDC_INSERT, CTU_PARAMS is ignored ([SAP note 1437811 (Batch input: BDC_INSERT parameter CTUPARAMS)|https://service.sap.com/sap/support/notes/1437811 ])
About the issue, I don't know, so maybe explain more about the context: for instance, do you run the session under a different user? (for instance, the user could be assigned a transaction/screen variant with table control variant, that protects some fields) Do you have one transaction in the batch input session or are there several ones. Try with one only to see if it works. If yes, then maybe it's something in memory that changes the "input-capability" of the field after the first transaction.
Sandra

Error while posting FB50 transaction code

Hi I am getting the below error while doing FB50 transaction code. Please help me
My company code is using EUR & country is Greece
Company code not assigned to country or country to calculation procedure
Message no. FF703
Diagnosis
An error occurred when checking the tax code. Either the assignment of company code and country or of country and calculation procedure is not correct.
Procedure
Check the system settings.
To do this, choose Maintain entries (F5).
If the program error occurred
In a standard SAP program, then create an OSS message
In a program you wrote yourself, then correct the program.
Thanks
Kishore

Hi
Go to OBBG -->Assign Country to Calculation Procedure and assign the Tax procedure( ie like TAXIN) to the GREECE Country.
This helps you resolve your issue.
Regards
Venkat

Error while accessing transaction codes through URL's in IFrame UI element

Hi Experts,
I have created Transaction iviews ck91N, ck11N, ck24 in SAP NW CE7.2. I am accessing these Transaction iviews through URL's in webdynpro java application. I am using IFrame UI element in a Roadmap UI for each transaction code.
when i access step1 i.e ck91N in a IFrame it is working fine then i click button for step2, it displays the following error.
Error while processing your request!
What has happened?
The call of URL http://yyyyyyyy:8001/sap/bc/gui/sap/its/webgui has been terminated due to an error.
Note
■The following error text was processed in system D10 : A:ITS_P:019 XSRF no sec_sesstoken
■The error occurred on application server eccdcs1s_D10_01 and in work process 0 .
■The termination type was: ABORT_MESSAGE_STATE
■The ABAP call hierarchy was:
Function: CKML_MGV_SURFACE_DISPLAY of program SAPLCKMLMVSURF
Function: CKML_MGV_SURFACE_DISPLAY of program SAPLCKMLMVSURF
START-OF-SELECTION of program CKMLMV_SURFACE
What can you do?
■In the case of termination type RABAX_STATE, you will find in system D10 in transaction ST22 more information on the cause of termination.
■In the case of termination type ABORT_MESSAGE_STATE, you will find on application server eccdcs1s_D10_01 in transaction SM21 more information on the cause of termination.
■In the case of termination thype ERROR_MESSAGE_STATE, you can search for more information in the trace file for the work process 0 in transaction ST11 on application server eccdcs1s_D10_01 . An analysis of trace files for other work processes may be necessary.
■If you do not yet have any user ID, contact your system administrator.
Error Code: ICF-IE-http -c: 730 -u: P00004943 -l: E -s: D10 -i: eccdcs1s_D10_01 -w: 0 -d: 20110426 -t: 135905 -v: ABORT_MESSAGE_STATE -e: A:ITS_P:019 XSRF no sec_sesstoken -X: -x:
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Then next step3 it is working fine. If i change Road Map steps Ck11N,ck91N,ck24 in this order then first one is working fine second one gives error and third one is working fine again. It is working alternatively. I don't understand why this is happening? when i use LinkToURL for these 3 URL's then they are working fine. LinkTOURL opens in new browser(window) and in Roadmap i am accessing 3 URL's in same browser(window).
Regards,
Pradeep Kumar
Edited by: pradeep_546 on Apr 26, 2011 2:17 PM
Edited by: pradeep_546 on May 2, 2011 11:43 AM
Edited by: pradeep_546 on May 3, 2011 8:02 PM

I am facing the same issue when I use Windows 7 OS. Did you resolve this issue?

PO creation through transaction code ME25 (vendor unknown) - reg.

Dear all,
When I'm doing excercise using transaction code ME25 (PO creation - vendor unknown), the system shows the error message as "Item category not allowed with document type".
How to overcome this issue.
Plz do the needful at the earliest.
Regards,
Chandramohan.N

Hi
Chandramohan
You can do this in IMGMM-PURPO and Define Doc types and select the required Doc type and Select the Allowed Item Category. In this way you can allow the item category to the respective Document type.
The item category determines the field selection and whether any additional data screens are shown.
In addition, it determines whether a goods receipt or invoice receipt is to follow.
The following list contains the item categories defined in the standard SAP R/3 System:
Standard,Consignment,Subcontracting,Third-party,Stock transfer,Service,Material unknown and Material group
If helpful reward the points..

3kei Transaction code issue.

Similar Messages

Maybe you are looking for