3rd Gen iPod - Gapless etc.

Does the 3rd gen iPod support gapless play on both Macs and PC?
crossfading?

The 5th Generation iPod with video, the iPod Nano 2nd Generation and later iPods support gapless playback (If you are referring to a 3rd Generation iPod as opposed to a 3rd Generation iPod Nano then the answer is no). Crossfade settings don't transfer to the iPod that's an iTunes only feature: What is Gapless Playback?

Similar Messages

  • Transferred itunes library from Windows XP PC to new Windows 7 PC. plugged in 3rd gen Ipod. Ipod icon appears along with playlists, music etc. Songs are grayed out and won't play. Please help!

    I recently transferred itunes library from windows XP PC to new Windows 7 PC. The transfer was successful, however when I plug my 3rd gen Ipod Nano into the new PC, the Ipod icon appears along with the music, playlists, etc. The songs are shown but are 'grayed out' and wont play or sync.The 'Devices & Printers' window in new PC shows icon for Ipod driver & is OK. The icon for the Ipod appears but depicts a delta shaped warning icon that states that the Ipod is'not operating properly'. Tried troubleshooting. The troubleshooting message states the the Ipod is 'disconnecting'. Can you help me with this problem?        

    Then, I dropped the entire itunes file from the old PC (XP) into an empty external drive.
    That "itunes file from the old PC"?  Is that the iTunes folder, from the old PC, that was in the user home folder's Music folder?
    All of the library, playlists, etc. from the ipod as they always have been are shown, by they are 'grayed out' and will not open or play.
    That's on the iPod, correct?  Are all of your old playlists in iTunes, from the old PC, still there in iTunes on the new PC?  Are the songs in iTunes still playable?
    This document provides the steps to transfer a complete iTunes library between two computers.  See the section called External drive.
    iTunes: How to move your music to a new computer - Apple Support
    There are many steps, but this is a summary.  (1) On the old PC, consolidate all of your iTunes data into the iTunes folder.  (2) Copy this iTunes folder to the external drive.  (3) On the new PC (that has iTunes installed but NOT running), replace its existing iTunes folder with the one from the old PC (on the external drive).  When you run iTunes, it uses the iTunes folder from the old PC, and it should look like iTunes on the old PC (with all the playlists, ratings, play count, etc.), and your iPod will see the iTunes library as the same iTunes library (because it is the same library).
    If you did something different, and the old PC is still accessible, you may want to try it using the method from the linked document.

  • If I upgrade my 3rd gen iPod touch to iOS 5, will I lose all my content (photos, videos, notes, safari cookies, etc)?

    So I've had my 3rd gen iPod for almost 5 years now, and I'm tired of all the "This applications requires iOS 5.0 or later; you must update to iOS 5.0 in order to download and use this application" notifications, and since I don't have enough money to buy the new iPod, I'm finally upgrading to iOS 5.1.1, the highest I can upgrade this generation.  In the event that it doesn't save my photos (Camera roll and the pictures I put on from my old computer that I don't have anywhere else), I have been uploading them one by one to Dropbox, but this is a pain.  Basically, I'm wondering: if I backup my iPod before upgrading the software, will it reapply all my settings and content after iOS 5 is installed?  I've begun the process before and have gotten the notification that all content will be deleted.  I don't have all this content on my computer, either, because the photo albums on my iPod were folders of pictures on my old computer that I lost all the files from.  I can't just put these back on from my computer if it deletes them and doesn't save a backup copy.  But does it save all the settings in a backup copy and reapply them?  That's what I want to know.  Do I have to keep bothering with Dropbox, or can I just go for it and know everything will be fine?

    Only if something goes astray, which happens some times.
    - Backup the iTunes
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Make sure that all synced media like apps and music are in your iTunes library and any photos synced to the iPod are also on your computer. Synced media is not included in the iPod backup that iTunes makes
    Then update vai Tunes
    iOS 4: Updating your device to iOS 5 or later
    You need iTunes 10.5 or later on the computer.

  • I am unable to connect my 3rd gen iPod to my Windows 7 Laptop or iTunes

    Once again, Apple support Communities creates a new question instead of letting me search within iPod touch for my own research.
    For the past six months I have been unable to sync my iPod to iTunes.
    The 3rd Gen iPod Touch will not connect to Windows 7 and not recognized by iTunes 11.1.1.11.
    I have data/info on my iPod that I prefer not to compromise by doing a hard reset.
    I have confirmed that my iPod nano does sync with iTunes on my Win7 Machine. So I'm pretty certain my cable is working ok.
    I've heard that I can somehow sync via wifi, but I'm still not sure if that means I can backup my Notes, Contacts and other data without the use of applications like MS Office/Outlook etc.
    Thankfully, or detrimentally, I've been able to go for the last few years without changing the 10k songs on my iPod touch. But over the last six months, I've finally started getting bored with the existing songs. Hence the need to solve the non-syncing issue. And I don't like going blindly forward without a backup. My battery and home button have become glitchy and I'm concerned I may lose the unit completely one day soon.
    If anyone reading this has any experience with a similar issue, or could offer advice, workaround, or solution, I would be greatly appreciative. And I hope to assist others as I learn more through solving my Apple issues.
    Thanks,
    Ryan

    The Ipod works fine.
    Battery charges regularly with the occasional glitch.
    Running iTunes 11.1.1.11
    I figured a Nano would probably connect in a simpler way than the touch, but only have a couple computers and cables to test.
    I've reinstalled iTunes, but not the full suite, and not all traces. I will attempt this, but I suspect its related to my touch. I was able to connect other iphones to my itunes without issue, using the same cable.

  • Hooking Up Windows Formatted 3rd Gen iPod To New Macbook

    Hi guys
    I have a 3rd Gen iPod which I was using with my windows pc. I have now bought a macbook and wanted to know can I use the iPod with it?
    I tried installing the installer cd on the mac but it said something about requiring some networking plug in.
    Also can one single iPod used with both PC and Mac?
    What do I need to do?

    Macs can read Windows formatting so you just need to connect your iPod to start using the iTunes library. However if your iPod is set to update automatically take care when connecting back to your new computer and a different iTunes. If it is set to automatically update you will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press *No* (or "Cancel" if you are using iTunes 7). Pressing "Yes" (or Erase and Sync in iTunes 7) will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. In iTunes 7 Check the "manually manage music and videos" box in Summary then press the Apply button. Don't uncheck Sync Music it will be unchecked by default when you choose the manual setting: Managing content manually on iPod
    You can also use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on a Mac hold down the Option and Command (⌥ and ⌘) keys, (on Windows hold down the Shift + Ctrl keys). This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer.
    To keep your iPod Windows formatted you'll have to carry out any software updates or restores from the PC. Updating or restoring on the Mac will change the formatting.

  • 3rd Gen iPod refusing to update

    Ok, here's whats happened, any help would be most appreciated.
    I have a 3Rd Gen Ipod, and after updating to iTunes 7, it got completely wiped of nearly 4000 songs. I tried to update it several times with iTunes and it basically refused to do anything, and kept freezing my computer, and coming up with the message "The drive is not ready for use; its door may be open. Please check drive I: and make sure that a disk is inserted and that the drive door is closed." Very frustrating
    I have since restored it many times and retried updating, again no joy. I then formatted it via windows (twice now) on the advice from the nice lady on the Apple Tech Support line. And have even changed the drive letter from I to J.
    Now at least it will let me add music to it, but it won't let me put any more than 1.22Gb onto it. If i try and put just one more song on it freezes and either comes up with "unknown error occured (-53) " or unknown error occured (-124)
    Also i have tried various USB connections etc, but none of it has made a difference.
    I'm a bit loathed to give Apple £170 for a service when i could just buy a new iPod for not much more. So does anyone have some advice re the above problem?

    bump....
    sorry does anyone have any ideas?

  • Security Update 2008-006 broke Firewire mounting of 3rd Gen iPod

    Updated overnight on my PowerBook G4. This morning my 3rd Gen iPod won't mount on the desktop. It will charge but not mount. Used my wife's USB dock connector and it mounted. I am upset. This is how I transfer files from home Mac to work Mac. Any suggestions?

    First thing to do is reset the FW chip set on the mother board. Unfortunately, when you power down the computer there is always a bit of power still applied to the motherboard to keep things alive and this usually includes the ports to do stuff like detect when a device wants to wake up the computer. The downside of this is when a bus/port chipset goes into a weird state, locks up, etc., simply power cycling (shutdown & restart) the computer won't work.
    So first thing to try is resetting the chipset and to do this you have to power down the computer and completely unplug the computer from the wall power (unplug the power cord to your Mac) & remove the battery. Also unplug everything from the Mac's ports (USB, FW, Ethernet, etc.) to make sure no parasitic power is still there to keep the chipset alive.
    Now let it sit for a minute (give those big power caps in there time to discharge). Now reattach the battery, plug the power cord back in & start up the Mac. Now plug in the iPod and see if your FW ports work any better.
    Best of luck!
    Patrick
    What to do if your computer won't recognize a FireWire or USB device
    http://support.apple.com/kb/HT1317?viewlocale=en_US

  • Extended Start-up Time in 3rd Gen iPod

    20GB 3rd Gen iPod, purchased pre-5/31/04. Besides legal battery failure (should I make a claim?), the Apple logo stays up for a much longer period than usual when I turn it on. Any ideas on how to fix it? Or is it just getting old?

    Macs can read Windows formatting so you just need to connect your iPod to start using the iTunes library. However if your iPod is set to update automatically take care when connecting back to your new computer and a different iTunes. If it is set to automatically update you will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press *No* (or "Cancel" if you are using iTunes 7). Pressing "Yes" (or Erase and Sync in iTunes 7) will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. In iTunes 7 Check the "manually manage music and videos" box in Summary then press the Apply button. Don't uncheck Sync Music it will be unchecked by default when you choose the manual setting: Managing content manually on iPod
    You can also use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on a Mac hold down the Option and Command (⌥ and ⌘) keys, (on Windows hold down the Shift + Ctrl keys). This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer.
    To keep your iPod Windows formatted you'll have to carry out any software updates or restores from the PC. Updating or restoring on the Mac will change the formatting.

  • I am trying to put music into my 3rd gen ipod touch and older ipod shuffle but they do not show up on Itunes when i connect them,what could be the problem?

    i am trying to put music into my 3rd gen ipod touch and older ipod shuffle but neither are popping up on itunes, what could be the problem?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • I have a 3rd gen Ipod touch and when i connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I connect this older iPod to my iTunes?

    I have a 3rd gen Ipod touch. When I connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I make this older iPod show up on my iTunes?

    Hi ChristianHelpplz,
    Thanks for visiting Apple Support Communities.
    It seems like your iPod touch is not recognized by iTunes on your Mac, but your iPhone 6 is working normally.
    I recommend starting with these steps to troubleshoot your iPod touch and connection with your Mac:
    Check your USB connections
    Unplug other USB devices from your Mac and try again.
    Try a different USB port.
    Try a different USB cable.
    Restart your device
    Restart your iOS device or reset your iPod.
    Restart your Mac
    Turn your Mac off and back on.
    Update your software
    Check for software updates on your Mac.
    Check for an iTunes update.
    Check your security software
    If you have security software installed, learn how to resolve issues between iTunes and your security software.
    From:
    If you don't see your connected device in iTunes for Mac - Apple Support
    If you've tried these steps and your iPod touch is still not recognized, try placing it into Recovery Mode next:
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Sincerely,
    Jeremy

  • Nothing is working on my 3rd gen ipod touch but the home button. It's not sliding or anything. I've tried resetting and restoring it. Did not work

    Nothing is working on my 3rd gen ipod touch but the home button. It's not sliding or anything. I've tried resetting and restoring it. Did not work

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • 3rd gen iPod Nano will not sync with latest version of iTunes. It passes the connectivity test but not the sync test under diagnostics.  Worked fine on old Windows 7 laptop but not new one.  From Control Panel it shows up as an Apple iPod USB Device...

    3rd gen iPod Nano will not sync with latest version of iTunes on new laptop. It passes the connectivity test but not the sync test under diagnostics.  Worked fine on old Windows 7 laptop but not new one.  From Control Panel it shows up as an Apple iPod USB Device...

    Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
    There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok.

  • IBooks on iOS4 3rd gen iPod touch 64GB - crash causing reset

    I'm not sure if others have experienced the problem but I've been using iBooks and I'm finding that the device randomly resets while in use.
    The problem is not connected to a particular ebook or PDF, it seems to happen randomly - even a couple of times while browsing the bookshelf. I have approximately 300 books and PDFs installed.
    Using iBooks on a 3rd gen iPod touch 64GB, running iOS 4

    Finally decided to disable the wifi on my Cisco router & that seems to have fixed the problem. Must have been a conflict.

  • My 3rd gen ipod nano is not being read by itunes when I plug it into my mac laptop.  It says "no name" on the mac screen, I lost all my music on the ipod itself.

    My 3rd gen iPod nano is not being read by my iTunes on my mac.  When going to sync, the mac screen says "no name". Also I believe I lost all the music on the iPod.  When turned on it says "Welcome" as if it is new.  I tried to copy all my music into the "no name" folder and then sync.  The iPod said it was "syncing".

    So does iTunes see the iPod or not?  I couldn't quite understand from your post as you said it wasn't, but then said that the iPod was syncing...
    B-rock

  • 3rd-Gen Ipod Touch Overheating All the Time!

    I have a 3rd-Gen Ipod Touch, 32gb that I bought over a year ago. I've never had a problem with it before until about two weeks ago and it's concerning me quite a bit. Whenever I use it, within 5 minutes it becomes very hot, mostly on the bottom near where it charges. Within 10 minutes, the heat has spread throughout the whole device and has become so hot that I can no longer hold it. This happens all the time, not when it's charging. I'm worried that it will overheat to the point that I can no longer use it.
    Has this happened to anyone else? Is there a way that I can fix this? Do I have to have the battery replaced or something?
    I appreciate any feedback, and thanks.

    Sounds like a bad battery. Search ebay, there are people who provide the replacement service for as low as $19.

Maybe you are looking for

  • Problem with burning Ken Burns effect on iDVD

    When I preview a slideshow on iDVD after setting the theme to Ken Burns, it looks great. When I burn the project onto a DVD however the Ken Burns effect disappears and I'm left with static photos. What's going on?

  • Permissions on files created using UTL_FILE package

    The files created on unix using UTL_FILE package have permisisons rw- - - - - - -.(600). I want them to be created with permissions 640.(rw-r - - - - - ).i.e read access to the group also. The umask setting of the unix account of the oracle instance

  • Alternative of BAPI_ALM_ORDER_MAINTAIN

    Hi all,   The BAPI function module BAPI_ALM_ORDER_MAINTAIN is marked as obsolate in ECC6. If you know any alternative of this BAPI, Please let me know. Thanks & regards, Arnab. Moderator message: please do more research before asking. Edited by: Thom

  • Multiple line select in TableView

    Hello all! I have this problem while working with Tableview. I have to delete multiple rows at a time but not able to. I created an instance(<b>lr_tableview</b>) of the class <b>cl_htmlb_tableview</b>. Although the instance is getting loaded correctl

  • Another problems

    After upgrading my KDE, i couldn't run Noatun, Juk, KMplayer, basically all the applications under multimedia menu...i don't know if this is related to my sound problem basically in terminal i type "kmplayer &" or "noatun &" and i get the same output