3rd Gen iPod & New Desktop

I recently got a new desktop.  When I switched my 3rd gen nano to the new computer, I lost all my downloaded CDs.  When I re-loaded them to the new computer, they showed up on the computer, but not on my iPod.  What do I need to do to fix this?

Are these ripped CDs configured to sync to your iPod?  Double check your sync settings from under the iPod's Summary and Music tabs.
iTunes: Syncing media content to iOS devices and iPod
B-rock

Similar Messages

  • Transferred itunes library from Windows XP PC to new Windows 7 PC. plugged in 3rd gen Ipod. Ipod icon appears along with playlists, music etc. Songs are grayed out and won't play. Please help!

    I recently transferred itunes library from windows XP PC to new Windows 7 PC. The transfer was successful, however when I plug my 3rd gen Ipod Nano into the new PC, the Ipod icon appears along with the music, playlists, etc. The songs are shown but are 'grayed out' and wont play or sync.The 'Devices & Printers' window in new PC shows icon for Ipod driver & is OK. The icon for the Ipod appears but depicts a delta shaped warning icon that states that the Ipod is'not operating properly'. Tried troubleshooting. The troubleshooting message states the the Ipod is 'disconnecting'. Can you help me with this problem?        

    Then, I dropped the entire itunes file from the old PC (XP) into an empty external drive.
    That "itunes file from the old PC"?  Is that the iTunes folder, from the old PC, that was in the user home folder's Music folder?
    All of the library, playlists, etc. from the ipod as they always have been are shown, by they are 'grayed out' and will not open or play.
    That's on the iPod, correct?  Are all of your old playlists in iTunes, from the old PC, still there in iTunes on the new PC?  Are the songs in iTunes still playable?
    This document provides the steps to transfer a complete iTunes library between two computers.  See the section called External drive.
    iTunes: How to move your music to a new computer - Apple Support
    There are many steps, but this is a summary.  (1) On the old PC, consolidate all of your iTunes data into the iTunes folder.  (2) Copy this iTunes folder to the external drive.  (3) On the new PC (that has iTunes installed but NOT running), replace its existing iTunes folder with the one from the old PC (on the external drive).  When you run iTunes, it uses the iTunes folder from the old PC, and it should look like iTunes on the old PC (with all the playlists, ratings, play count, etc.), and your iPod will see the iTunes library as the same iTunes library (because it is the same library).
    If you did something different, and the old PC is still accessible, you may want to try it using the method from the linked document.

  • 3rd gen iPod Nano will not sync with latest version of iTunes. It passes the connectivity test but not the sync test under diagnostics.  Worked fine on old Windows 7 laptop but not new one.  From Control Panel it shows up as an Apple iPod USB Device...

    3rd gen iPod Nano will not sync with latest version of iTunes on new laptop. It passes the connectivity test but not the sync test under diagnostics.  Worked fine on old Windows 7 laptop but not new one.  From Control Panel it shows up as an Apple iPod USB Device...

    Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
    There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok.

  • Hooking Up Windows Formatted 3rd Gen iPod To New Macbook

    Hi guys
    I have a 3rd Gen iPod which I was using with my windows pc. I have now bought a macbook and wanted to know can I use the iPod with it?
    I tried installing the installer cd on the mac but it said something about requiring some networking plug in.
    Also can one single iPod used with both PC and Mac?
    What do I need to do?

    Macs can read Windows formatting so you just need to connect your iPod to start using the iTunes library. However if your iPod is set to update automatically take care when connecting back to your new computer and a different iTunes. If it is set to automatically update you will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press *No* (or "Cancel" if you are using iTunes 7). Pressing "Yes" (or Erase and Sync in iTunes 7) will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. In iTunes 7 Check the "manually manage music and videos" box in Summary then press the Apply button. Don't uncheck Sync Music it will be unchecked by default when you choose the manual setting: Managing content manually on iPod
    You can also use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on a Mac hold down the Option and Command (⌥ and ⌘) keys, (on Windows hold down the Shift + Ctrl keys). This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer.
    To keep your iPod Windows formatted you'll have to carry out any software updates or restores from the PC. Updating or restoring on the Mac will change the formatting.

  • I have a 3rd gen ipod touch and i want to update to 4.3.3 and it says error when done downloading and i have the new itunes?

    i have a 3rd gen ipod touch and i want to update to 4.3.3 and it says error when done downloading and i have the new itunes?

    it says we could not complete your itunes store request an uknown error occurred (-9808)
    there was an errorin the itunes store. please try again later. I plug in my ipod to update it and it says that?

  • Transferring library to new 3rd gen ipod

    I naively assumed that it would be simple and automatic to transfer my entire library to my new 3rd gen ipod. In fact fewer than 25% of the songs have transferred and the rest 'could not be found.' I have updated to the most recent version of itunes. Has anyone else had this problem with a new ipod? And is there a solution?

    i have a similar problem!
    my songs from my old itune library wont sync to my new ipod and they are different generations.
    we both need answers here!

  • 3rd gen iPod will not complete the RESTORE process with new Hard Drive

    I have an 3rd gen iPod and I have replaced the hard drive with a newer MK2006GAL. The drive formats fine with a USB cable, formating Mac OS Extended Journaled. It will not complete a "restore" when connected via FireWire in iTunes or with any ipod updater utility. this happens on any mac (we have several). It will not even see the iPod updater when connected via USB and it says MUST CONNECT WITH A FIREWIRE CABLE. It will not format with Disk Utility when connected with the Apple FireWire cable only USB. This is the second new hard drive I have tried. I thought the first "replacement drive" was bad. Turns out it must be something else. Does this sound like a bad battery or motherboard or bad FireWire cable to you? The connectors look fine (under magnification). other problems, while this iPod will not Restore properly, it also will not turn off.
    Would like to know if anyone else has seen this trouble.
    thanks.
    Powermac G4 1.25 MDD, OS9/OSX, 3rd gen iPod   Mac OS X (10.3.9)  
    Powermac G4 1.25 MDD, OS9/OSX, 3rd gen iPod   Mac OS X (10.3.9)  
    Powermac G4 1.25 MDD, OS9/OSX, 3rd gen iPod   Mac OS X (10.3.9)  

    Hmm now getting this message.
    "The ipod "ipod" could not be restored.An Unknown Error occured (1429)".
    It still will not format. Does anyone know what a 1429 error is?
    Powermac G4 1.25 MDD, OS9/OSX Mac OS X (10.3.9)

  • 3rd Gen Ipod touch. I want to start as new, not restore.

    I have a 3rd gen Ipod Touch that I want to delete everything and start as new, but it keeps wanted to restore.  The ipod touch was my sons, and I upgraded him to a 4.  I have an older ipod and I was hoping to upgrade to the touch, but it won't let me start new. Please help.  I have tried restoring, but it fails.  Is there a way to completely wipe it out so I can use it ??
    thanks.

    "I have a 3rd gen Ipod Touch that I want to delete everything and start as new"
    Yes.  That is called a restore.

  • MacBook Pro doesn't like my 3rd gen. iPod

    Just got a new MacBook Pro (work-issue = no administrator password for me), which replaced a Titanium PowerBook. Tried to hook up and sync my 3rd gen. iPod for the first time, using the Firewire port of course. (Music library has already moved to new machine.)
    The iPod doesn't seem to be seen by the MacBook Pro. It doesn't show up in the iTunes source list or on the desktop. The iPod goes into "Do Not Disconnect" mode, then it freezes.
    I've seen other people posting with similar or same issues, but no resolution. What could be going on?
    MacBook Pro   Mac OS X (10.4.5)  

    Update: I have discovered that if I connect the iPod to the Mac with the Firewire cable only, things work perfectly. If I connect thru the dock with the iPod sitting in it (like I was before), things go haywire.
    So I guess the MacBook Pro likes my 3rd gen. iPod just fine. The iPod dock is what it doesn't like.
    Weird. Thanks for all your thoughts.
    Mac Book Pro Mac OS X (10.4.5)

  • I am trying to put music into my 3rd gen ipod touch and older ipod shuffle but they do not show up on Itunes when i connect them,what could be the problem?

    i am trying to put music into my 3rd gen ipod touch and older ipod shuffle but neither are popping up on itunes, what could be the problem?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • I am unable to connect my 3rd gen iPod to my Windows 7 Laptop or iTunes

    Once again, Apple support Communities creates a new question instead of letting me search within iPod touch for my own research.
    For the past six months I have been unable to sync my iPod to iTunes.
    The 3rd Gen iPod Touch will not connect to Windows 7 and not recognized by iTunes 11.1.1.11.
    I have data/info on my iPod that I prefer not to compromise by doing a hard reset.
    I have confirmed that my iPod nano does sync with iTunes on my Win7 Machine. So I'm pretty certain my cable is working ok.
    I've heard that I can somehow sync via wifi, but I'm still not sure if that means I can backup my Notes, Contacts and other data without the use of applications like MS Office/Outlook etc.
    Thankfully, or detrimentally, I've been able to go for the last few years without changing the 10k songs on my iPod touch. But over the last six months, I've finally started getting bored with the existing songs. Hence the need to solve the non-syncing issue. And I don't like going blindly forward without a backup. My battery and home button have become glitchy and I'm concerned I may lose the unit completely one day soon.
    If anyone reading this has any experience with a similar issue, or could offer advice, workaround, or solution, I would be greatly appreciative. And I hope to assist others as I learn more through solving my Apple issues.
    Thanks,
    Ryan

    The Ipod works fine.
    Battery charges regularly with the occasional glitch.
    Running iTunes 11.1.1.11
    I figured a Nano would probably connect in a simpler way than the touch, but only have a couple computers and cables to test.
    I've reinstalled iTunes, but not the full suite, and not all traces. I will attempt this, but I suspect its related to my touch. I was able to connect other iphones to my itunes without issue, using the same cable.

  • My 3rd gen ipod nano is not being read by itunes when I plug it into my mac laptop.  It says "no name" on the mac screen, I lost all my music on the ipod itself.

    My 3rd gen iPod nano is not being read by my iTunes on my mac.  When going to sync, the mac screen says "no name". Also I believe I lost all the music on the iPod.  When turned on it says "Welcome" as if it is new.  I tried to copy all my music into the "no name" folder and then sync.  The iPod said it was "syncing".

    So does iTunes see the iPod or not?  I couldn't quite understand from your post as you said it wasn't, but then said that the iPod was syncing...
    B-rock

  • Syncing my 3rd Gen IPod Touch, All my music and videos show in the device on iTunes, but when I look at the device itself, it say no content.  Can someone help?

    Automatically Syncing my 3rd Gen IPod Touch, All my music and videos show in the device on iTunes, but when I look at the device itself, it say no content.  Can someone help?  The Apps seem to sync fine, just not the music, videos, podcasts, or audiobooks.

    Change your iCloud ID password: http://support.apple.com/kb/HT5624.  After doing so, go to Settings>iCloud, tap Delete Account, then sign back in with the new password.

  • 3rd gen ipod not detected by mac or pc

    Hi, I used my friends laptop all summer with my old 3rd gen ipod and everything was fine... now I'm home and I try to sync it to my dual 1.42 ghz g4 and iTunes wont detect it and the disk doesn't appear on my desktop.
    I went into device manager and it is identified under the firewire tab but other than that theres no indication that it is connected to my computer . The Disk utility doesn't detect it either.
    So i try my PC notebook and it is recognized as a removable disk in my computer, though I cannot open it and when i try to right click to reformat I my computer stops responding and I have to force quit. very rarely It reaches the format option but when i try to do it it says "disk cannot be formatted".
    I've downgraded itunes to the one on the cd, ive reinstalled itunes, and nothing seems to change it. I just need it to show on device manager and I think I will be ok.
    The ipod itself works like a champ...the music from my friends laptop plays fine on it, but there just seems to be an issue with connecting it to another computer so i can restore it... any tips?
    Message was edited by: Nakamor1

    Have you run Disk First Aid on it? In the Applications Folder, Utilities, Disk Utility
    If the System Profiler can find the device, Disk Utility usually can, too. If Disk Utility finds something wrong, run the repair a couple times, even if DFA says it can't fix it.
    Good luck

  • I have a 3rd gen iPod touch and I downloaded the most recent itunes, ever since I did, only the first song syncs to the ipod. As soon as it gets to the second, it xtill says its syncing. However, nothing happens. How do I fix this?

    I have a 3rd gen iPod touch and I downloaded the most recent itunes, ever since I did, only the first song syncs to the ipod. As soon as it gets to the second, it still says its syncing. However, nothing happens. How do I fix this? I have restored and updated the ipod. I have the new iTunes. I have restarted my computer checked the connection and everything.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

Maybe you are looking for

  • Need a Report That Shows # of Accounts Assigned To Team Members

    I need a report that the managers can use for inspection to make sure that all of their reps are assigned to the same # of accounts in Siebel as they are in our commissions system. That being said I need the following: Manager Name User Name # of Dis

  • Entities not refreshed

    Hi I have a list of entities (say Customers) presented to the user. I edit one (say change the Name), save it and go back to the list. Some times I see the new value, sometimes I see the old. I refresh the page and I sometimes I see the new, sometime

  • Specifying a filename in a plugin dialog

    I'm completely new to AE plugin development, so bear with me. I'm going to attempt to update the AEFlame plugin to the latest version of the flame renderer (AEFlame is now 8 years behind!)...but the most important thing I can see as far as the interf

  • Indesign CS6 won't open; wants me to go to Cloud

    I do NOT want to get the cloud, but after getting a new laptop, when I try to open my CS6, it opens Adobe Application Manager and wants me to get the trial. I do not want it. I just want my CS6 applications. Any ideas why this is happening?

  • Opening a document

    In the sales order screen I have created a field which will have the name of the Terms and Condition document (PDF) associated with that order. I want the name to be a hyperlink which will open the corresponding document in a new window. I only know