3rd Gen nano iPod + tops

well, im looking at the nike + tops long sleeves. But they dont say whether the pockets fit the 3rd Gen ipods. Has anyone got any idea or where tobuy some or when they will be out?

What format are the songs in? What bit rate? The number of songs an iPod is "supposed" to hold is predicated on the idea that the songs will be 3 minutes long, 128 kbps AAC files. If your tracks are .wav or Apple Lossless, fewer of them will fit.
You can try restoring your iPod: Hook the iPod up to your computer. In the middle of the Summary page in iTunes, click the Restore button. Note: this will delete everything on the iPod so be sure you have everything backed up.
Also, what size is your Nano really? They come in 4 gigs and 8 gigs, not 9 gigs. Is it really an 8 gig?

Similar Messages

TS1538 I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

not recognized by anything: http://support.apple.com/kb/TS1369
recognized by windows, but not itunes: http://support.apple.com/kb/TS1363
solving the problem if the above does not work:http://www.instructables.com/id/What-to-do-when-iTunes-does-not-recognize-your-i Po/step1
(make sure you go to the next slides.

Loading songs on ipod 3rd gen nano without itunes

is there a way to get songs onto the new Ipod 3rd gen nano 8GB without using Itunes? I have tried Xplay 2.3.5 and the playlist is all messed up. It would show all the songs in my hard drive on every single playlist created, even the On-the-Go list. I would hate to use Anapod because of they limited activation status. Itune is slow, and too restrictive for me. I hate itune with a passion. So does anyone know a way to get songs onto this ipod properly with Xplay or another good program? I have tried everything i know and I am able to throw this thing against the wall. thank you in advance!

I feel your pain. I have been fighting iTunes and QuickTime for 2 weeks trying to get it so that it does not interrupt my wireless USB connection when ejecting the Nano. A simple solution would be to use another program to manage the syncing of stuff to the iPod.

3rd Gen Nano connects and then QUICKLEY disconnects on an XP machine

Below are two postings I made in a different discussion area. The 30g iPod is now working fine, the Nano is as stated in the second post. Please to help me out? As stated below Apple says it works and it does on the wrong machine! As many of you out there know, sometimes a husbands and a wifes taste in music are different. I would like to keep my music on my machine. Thanks, reo52............
I have been running very well with my 30g Video iPod. I got an 8g nano as an award. I had just upgraded iTunes, tried hooking the nano up and now nothing works! iTunes never did find the nano. Did the r,r,r,r,r thing but could only reset because iTunes can not see the nano. Later I was syncing the 30g and was ejecting it and got a message stating it could not be ejected as there are files on it being used by another program. Did the 5R's on he 30g, the unit was syncing and the battery went low and interrupted the sync. Now iTunes can't see the 30g or the 8g. I did a reinstall of iTunes and still nothing. This is driving me to drink, HELP if you can. Thanks, reo52.............
Well, I sent the Nano in, it came back, Apple found no problems with it. When trying to sync it acted as before. With Apple on the phone I tried syncing to my wifes machine!?? I'll be dammed it synced right up!???! Well Apples says it works because it works on my wifes machine!! Well, why wont it work on my PC?!!. Both machines are running up to date iTunes, both have the same firewalls and virus programs and both are running XP with all service packs and updates installed. Now I can work around this for awhile but I have got to get that Nano to sync with my machine. Help if you can and Thanks again, reo52

To Apple,
822 unresolved problems in "Connecting 3rd Gen Nano to a Windows Machine" , 25-50% on each page are problems with connecting a Nano in Windows and getting it recognized in Windows or iTunes or syncing errors(1st 5 pages). I think this qualifies as a serious problem. Many state that their Nano works on a different Windows machines and or an Apple machine, but not the one they use. Others and myself have sent their Nanos beck and Apple. Apple states "unit works fine, can not reproduce problem, or words to that effect" then Apple sends it back! It still will not work for the customer. So who has the problem? Owners who can not use their Nano? Apple who has the owners cash but maybe not their goodwill? I do not know, but I can see a Customer satisfaction problem developing. So APPLE please do your best to resolve this situation. It could be to your own advantage and help with those 822 unresolved problems on the Nano Pages. Thanks, reo52

3rd Gen Nano click wheel won't work in the car. My OLD one worked, but this one doesn't.

I use a PXDP iPod2Car iPod interface in my 02 Firebird. My original, trusty 3rd gen. nano used to work perfectly. It charged, and the steering wheel as well as main stereo controls operated it. Something happened to it recently (my guess is the logic board went bad) and it does not come on at all, plugged in or not. I actually have 2 more just like it that I was going to give away, but decided to keep.
Neither one of these will let me use the click wheel to scroll while plugged into the car - the old one did.
I can only change songs with the car's controls.
The only difference between these two and the old one, is that they have the HP logo on the back. Are they later models, with perhaps different hardware?
Is there anything I can do about it?
Is there any hope for the old one?
I hate not being able to scroll at all!
thanks in advance!

Contact PXDP. They should know if their product is compatible with your iPod Nano.
Why won't my iPod play through my iPod speakers or car kit?

3rd gen nano. Lock click wheel volume control but NOT track control???

My title basically says it all. I have a 3rd gen Nano that I want to use solely for a car and it won't be removed. Problem? The track control has to be done on the iPod itself as the car stereo won't do it, but the volume can be controlled by the car's head unit. That said I want the iPod volume to always be on max. Apparently the volume lock feature isn't what I'm looking for, nor is the hold switch. I want to lock the volume from being controlled by the scroll wheel but still be able to change tracks using the scroll wheel... without having to go into a menu or anything. The iPod will eternally be on shuffle and any track changes will just be skipping songs... and all done blindly just by touch... hence why it's driving me nuts I keep scrolling the volume down. Hope that makes some sense. I'm long-winded and wordy but not always clear. Lol

The system won't seem to let me post this anywhere... it's saying I'm not allowed whatever that means. Exception being this community. So sorry if I pi** everyone off by listing in the wrong location.

Scosche earphones that work with 3rd gen Nano

The original earphones that came with my 3rd generation 8 GB Ipod Nano recently got destroyed and I'm looking to buy a replacement set. I'd like to upgrade to a set with better sound quality and in the in-ear style that blocks out ambient noise. I've heard really good things about the Scosche IDR655m but I notice that in their compatibility listing they only list the Nano 5th generation.
All I'm really looking for is great sound and the noise-blocking feature of the in-ear style. I really don't care if the remote or mic features work. I didn't have them on my previous set and I don't mind having to skip songs or increase/decrease volume by messing with the actual Ipod.
What I'm wondering is...would the Scosche IDR655m still work and give me good sound quality and ambient noise reduction on a 3rd gen Nano? Or is there another more basic Scosche product that you would recommend that would still give me all of the great sound on a Nano 3rd gen but without all of the "bells and whistles" of the remote and mic features?

Could be. Are the phones you want to use the kind with a mic and button (like you would use with a smart phone)? I bought some V-Moda headphones to use with a Nokia phone, and thought I could use the button to answer the phone, but every time I plugged them in, the phone would think I was trying to dial a number. The phones didn't give me any problem with my iPod Classic 160, but it was an older one. If that's what you use, maybe try some more standard phones to see.
Maybe not the problem, but all I could think of.

3rd gen nano shuts off automatically

When I dock my 3rd gen nano into my Bose portable it randomly shuts off and displays the battery charging screen on the nano.
When I press the start button the Bose remote the nano will play again for a few songs then shut off again. This doesn't happen with my ipod video.

I called Apple Support last night to make sure they are aware of this problem. While on the line, we tested a few scenarios, and it seems that the nano only shuts off automatically if the pause / play buttons are used on the Bose Sounddock remote. When I started the nano using its controls rather than the remote, everything worked fine, including adjusting the volume, skipping songs. Only the play / pause button caused the problem, but really, who knows at this point.
I also noticed this problem only after "upgrading" to firmware 1.0.2. I will try to restore the nano to its factory settings this evening (1.0.1) and see what happens.

3rd Gen Nano random shutoff requiring reset

My sister got a 3rd Gen silver coloured Nano for her birthday back in May. Since mid-September, she's been having a problem where it will randomly shut down and nothing will work to get it to turn on again except a reset, even with an apparently full battery. It's getting to the point where I have to reset several times a day, just so she can use it. I'm wondering is this is a common problem and if there are any troubleshoots for it other than continuing to reset it?
It should be noted that she's using the iPod on a computer running Windows Vista, as I'm the only mac user in the family.
Message was edited by: Taineyah

A friend gave me her 3rd Gen Nano today, and it had exactly the same problem you're having. I also tried all the Apple support suggestions, and nothing they suggested worked. (Like you say, resetting doesnt work without the menu button!) This may sound crazy, but this little trick worked:
Press the click wheel firmly, and run your finger around and around it, as if you're scrolling, pressing firmly the whole time. The screen may go nuts, but don't worry about it. Press counter clockwise several time and clockwise several times. I had to do this probably ten times, but it worked!
I guess that when dirt or debris gets lodged under one of the buttons this method can help dislodge whatever is in the way and get the button working again. It's free, easy, and definitely worth a try. It got my menu button working again when nothing else did.

Pictures in iPhoto not syncing with 3rd gen Nano

Hi, I posted this in the iPod discussions area also but thought someone here may have the answer.
Hi all. When I go to sync pictures in iPhoto to my 4gig 3rd gen Nano, not all the picture are recognized. One album with 30 pics in it, only 3 are synced. this is happening in iTunes even before I hit the sync button. I have 1650 pictures in the total library but only 1495 are seen by iTunes and the Nano. Any thoughts ? thanks in advance.

I confirm this problem.
Since I have a iPod Classic and for a few days a iPod nano 3rd gen, I can pre-sets station on the 80GB and not on the nano.
I suspect that the problem is not coming from the radio accessory but the nano.

3rd Gen nano (RED) screen issue

I've just got my 3rd Gen nano (RED) but it seems that there is an issue with the backlight of the screen. Initially, when I tried to charge it with my MacBook with the USB cable, it didn't charge at all. I have to plug it into the power adapter to get it charging.
Also, I have to press the screen to get the backlight to "work" otherwise I can hardly make out what's on the screen.
What can this be? Also, is it a case of the iPod being fully drained of power? Please help! I'm getting this as a Christmas present for my girlfriend

To address the charging issue, make sure you are connecting the ipod to a high powered USB port (2.0) for it to properly charge on your computer. Often these ports are on the back of the computer, not on the front or the keyboard.
Yes, if your ipod is very low on battery charge the backlight will not come on.
Also, you should not have to touch the screen to turn on the backlight. In fact if it comes on when you touch the screen it is defective. It is only supposed to come on when you touch the clickwheel.
You should probably check to see what you have your backlight settings set to on the ipod. I have mine set to 10 seconds, so it comes on when I touch the click wheel and the light turns itself off after 10 seconds. If this is the behavior you see on your ipod, it is working fine. If you want to extend the time it stays on, you can set it to stay on longer under the settings. be advised the backlighting does use battery power, and your playlife may be affected by having the backlight on a lot.

3rd gen Nano needs iTunes 7.6 or later... but can't use 8 on 10.4.11 osx

My son received a 3rd gen nano as a gift. When we connected it to our Mac (where we already support a couple ipods), it was not recognized as a source, although it does show up on the desktop and the iPod immediately said "Connected.". But, a message popped up that stated that "The ipod cannot be used without installing iTunes 7.6 or greater. Go to www.itunes.com" So we went to download iTunes - the only option is version 8. I installed it on the Mac - or tried to. Turns out you need a newer version of QuickTime to do so. But the newer version of QuickTime requires a newer OS than we have. So we ended up leaving the Mac with iTunes 7.5 on it. My dilemma - how can I get iTunes 7.5 version on the new iPod? Or what do I need to do to the iPod to get it to be recognized in iTunes. Sorry to be a dunce - I tried opening the iTunes 7.5 icon on my desktop and selecting the iPod as the installation place but it wouldn't let me. I really don't want to spend $130 upgrading the OS when everything else works just great. Any ideas?

http://www.apple.com/quicktime/download/
Select the Radio button for Tiger (10.4 is Tiger), download and install.

3rd gen nano keeps repetedly connecting/disconnecting from pc

hi my 3rd gen nano is repeatedly connecting/disconnecting from pc when plugged in.
please could someone help me with this situation it would be greatly appreciated thanks cant get it to stay connected to my computer.

Hello there,
And welcome to Apple Discussions!
Have you tried a different cable or connecting it to a different USB port on your computer?
Otherwise the only suggestion I have for you is to try and force your iPod into *Disk Mode*. If you are successfully able to do that, it may help keep your iPod mounted long enough for you to perform a restore via iTunes.
Here are instructions on how to put your iPod into *Disk Mode*.
[Putting iPod into Disk Mode|http://support.apple.com/kb/HT1363]
B-rock

Clickwheel games quit syncing to my 3rd Gen Nano...

I recently restored my 3rd gen nano and resynced all my media.
For some reason, my clickwheel games will no longer sync. I've done the following:
Ensured that my computer is authorized
Made sure I've selected "Sync Games" and selected each of my 3 games to by synced.
Before I sync, I see in the Capacity bar that the games are there.
After I sync, the games section of the Capacity bar disappears, as does "Games" from the color legend just below the bar.
I tried restoring again tonight, with the same results. To retry, and uncheck "Sync Games", sync, recheck "Sync Games, sync. Same results. I also reset my warnings, and am not seeing any.
I've had these 3 games on this same ipod for years. Not sure why they've decided not to sync any longer.
I'm syncing with Itunes 10.4.1.10 on Windows 7. My ipod software is up to date.
Any ideas?

Why can't you add them? What happens when you try? How is your iPod configured to sync podcasts?
B-rock

3rd gen 8GB ipod touch stuck on connect to itunes

This isn't fair. I just bought this 3rd gen 8gb ipod touch (my first ipod ever, only owned Mp3 players) from best buy today and i can't even use it...
I'm going to start from square one, this will be long-winded, so forgive me in advance. But detail might help you guys help me out...
Okay, all giddy with excitement I boot up my touch for the first time. It tells me to connect it to itunes. I do that, hooking up the touch to the computer via usb. Vista detects it, installs the "apple mobile device" drivers just fine. Good, so then I open up itunes -- latest version -- and it's telling me to set up my ipod; name it, etc. Alright, I'm almost bursting at the seams here with excitement, but then itunes is notifying me that iOS4 is out. I upgrade, it takes a few minutes to do its stuff, it's done, and bam it's working. I play with the ipod a little bit, looking at the apps that already came with it. I disconnect, play with it, then reconnect to the computer again.
So now, itunes for some reason is doing a "recovery" process -- i did not tell it to initiate this. So it's in the process of "recovering" (backing up, i guess?) and Vista is prompting me to install the driver "Apple Mobile Device (Recovery)" I tell it ok, locate and install them. It does that, I'm guessing, for it's now prompting me to insert a CD. Well, there is no CD so I tell it to find this driver on the internet. It says "cannot find drivers check manufacturer's support site blah blah blah." At this point, itunes tells me that it cannot complete the "recovery process" -- no error code or anything, and the dialog box closes.
Now, my ipod goes into the connect to itunes screen. Itunes does not recognize it, for it does not even display my ipod at all. Vista does however, and each time i connect the ipod to the computer it attempts to install the "apple mobile device (recovery)" driver and fails each time. I don't know what's happening. I've lost all functionality in my ipod, can't even get into DFU. iTunes just refuses to recognize it. I've tried all of those fixes (reinstalling itunes, rebooting, trying that method where you go into device manager and update the apple mobile device (recovery) drivers....all of it doesn't work). I've spent hours websearching...
And I'm at a loss. I'm ready to throw this thing somewhere. Can you guys suggest any help for me? Please...
Message was edited by: regal
I didn't leave it connected - sorry. edit by regal

What did you do, I'm having the same problem, and also about to chuck the thing in a lake... help!!!

3rd Gen nano iPod + tops

Similar Messages

Maybe you are looking for