3rd generation ipod not starting up

My first generation iPod doesn't start up (black & white). I haven't used it for few years and want to use it again. I guess the battery is dead? Is there anyway to fix it? I really want to use it.
Its 3rd generation iPod (NOT IPOD TOUCH)

How long have you left the iPod to sit and charge?  After leaving it to charge for an extended period of time, try resetting it.
How to reset iPod
About how long did it go unused?  iPod batteries need constant activity in order to maintain any sort of capacity to build a charge. 
B-rock

Similar Messages

  • My 3rd generation ipod wont start up anymore first u see the white apple than whole screem turn up white and it goes back to apple

    hello,
    i have an ipod touch 3rd generation  when i put it in the charger (computer or wall charger)
    and wait till te apple pop up it first stay for like 1 minut on the apple than the whole screen turn white and it goes again on the apple
    it would be terrific if someone has a selution for this (sorry for my bad english if i made any wrongs)

    If restoring doesn't help, sounds like it might be  time for a new battery.
    Click here >  Apple - Support - iPod - Service FAQ

  • Ipod Touch 3rd Generation does not get to start-up screen

    Help!
         my ipod touch 3rd generation will not load the start-up screen but follows a cycle, connecting to the USB port of a computer the ipod shows Battery Low
    Indication; after about 3 minutes of charging the Apple logo appears and remains for approximately 3-5 minutes before the ipod turns off, and this cycles with
    battery charge.
    The ipod cannot be reset, and when connected to a computer running iTunes the ipod is not recognised, leaving me unable to follow the restoration or recovery
    instructions found on this site.
    Does anyone have an idea what could be wrong and a potential solution to the problem?

    See if this program will get the iPod i recovery mode:
    RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov
    Next see if DFU mode will let iTunes see the iPod so you can restore the iPod.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My 3rd generation ipod touch will not connect to itunes. i plug it up to the computer by USB and it makes a jingle and my computer recognizes it in the my computer screen, but it will not connect to itunes. what should i do?

    my 3rd generation will not connect to itunes when i plug it up to the computer by USB. i have tried to do it with itunes open and closed. it wont recognize it but it is recognizes in the my computer screen. it even makes a jingle when plugged up. on my ipod i can download music wirelessly from my itunes. other than this issue my ipod works just fine. what should i do?

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • My computer no longer seesmy 3rd generation ipod nano.  after following the on line directions to re-install I get a message it is ok to discinnect instead of do not disconnect.  how to I get the ipod back onto my computer?

    my computer no longer seesmy 3rd generation ipod nano.  after following the on line directions to re-install I get a message it is ok to discinnect instead of do not disconnect.  how to I get the ipod back onto my computer?

    Hello rh3362,
    I would start with this:
    http://support.apple.com/kb/TS1369
    Hope this helps.
    ~Julian

  • I keep getting the message sync complete but my ipod nano 3rd generation is not syncing any ideas. I have used 3 different cables, reinstalled itunes

    I keep getting the message sync complete but my ipod nano 3rd generation is not syncing,  any ideas. I have used 3 different cables, reinstalled itunes to the latest version.  My nano shows in the side bar of i tunes

    There are instructions for starting it on this page : http://support.apple.com/kb/TS1567

  • My Center button on my Ipod 3rd generation is not working? What do i do it still goes up and down just doesnt select anything.

    My Center button on my Ipod 3rd generation is not working? What do i do it still goes up and down just doesnt select anything.

    What I had to was backup my device's data to either iCloud or iTunes. Once it was backed up I erased all of my settings as if my iPad just came out of the box. You set it up again and it will asked you to either start as new, back up from iTunes, or back up from ICloud. If you want to see if everything works you can set up as new, otherwise just pick the choice depending on where you backed up your information. Eventually it will restore all of your information and your iMessage and FaceTime should be working. It worked for me, if you'd like more/better instructions let me know!!

  • The hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    it might be a malfunction in your device. you might ave to send it to repairation
    1.ave you try resetting it or restoring it?
    2. did your hold boutons whas working beffor?

  • The backlight on my ipod touch 3rd generation will not come on, but everything works perfectly. I even used the advice given on the tech support page, and it still will not come on. HELP ME PLEASE.

    The backlight on my ipod touch 3rd generation will not come on, but everything else is working fine I even took the tech support advice by plugging it in and resetting it, but that didn't fix the issue either. I need help.

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    Also heating sometimes works. See:
    Why can't I select my wifi settings?
    A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • TS1398 my 3rd generation ipod touch recently lost wifi capabilities. I reset the network settings... this did not help.  I did a complete reset, I now no longer have the Safari icon on my itouch.  Has Apple removed wifi on older models to force new purcha

    I recently lost wifi capabilities on my 3rd generation ipod touch.  I reset the network which did nothing so I did a complete reset.  This actually removed the Safari icon off my itouch and still wifi is completely grayed-out.  Has Apple removed the wifi capabilities to force the purchase of new items?
    I find it completely disturbing that only recently has this become an issue for 3rd generation itouch users.
    Can someone please help as I am exceptionally frustrated

    This problem?
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • 3rd generation iPod Touch not recognized by Mac & iTunes!

    My 3rd generation ipod touch is not recognized on iTunes but is recognized when I plug it into a different computer. I've tried reinstalling iTunes numerous times and have referred to other online tutorials. With no success, my iPod will still not show up on my Macbook, and I've never experienced a problem like this before with either device. My mac and itunes still recognize my iPhone so I don't know why they would recognize one device but no the other. Solutions?
    Any feedback will help greatly. Thanks.

    It should work fine.  I have a 1st gen shuffle, and it still works...
    If you are updating to iTunes 11.x for the first time, iTunes may hide the sidebar initially, which is where the shuffle appears.
    If the iTunes sidebar (along left side of window) is not visible, from the iTunes menu bar, under View, select Show Sidebar.  In the sidebar, the shuffle should appear under DEVICES.

  • I have 3rd Generation IPod Touch, it does not boot up.  We have tried to restore, but we are stilling receiving errors.  Any ideas?

    I have a 3rd generation IPod Touch that no longer boot up.  I've downloaded the recovery, but it does not work.  It just lights up briefly and then we receive a message that the IPod drivers are not readable.  Any ideas what we can do to resolve?

    If iTunes is not seeing the iPod try:'
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    You said you "download the recovery"?  What is the recovery?

  • My ipod 3rd generation is not recognized by windows/itunes,please help

    My ipod 3rd generation is not recognized by windows/itunes,please help. Have tried restoring a number of times but did not work, any suggestions?thanks

    Start with this Apple support document.
    http://support.apple.com/kb/TS1369
    B-rock

  • 3rd Generation IPOD Nano not recognized

    I have two 3rd generation IPOD nanos that are not being recognized by 4 different windows XP systems. One of them is a 4G unit that my daughter has been using for at least half a year. It is not being recognized when plugged into the USB. The other one is a brand new unit that is also not being recognized. I have installed and uninstalled the iTunes software and have the latest. I have reset the IPODS. I have double checked the USB drivers and such. Rebooted. The whole bit. The 5 R's +.
    On my system at work, they are not recognized either. However, I plugged in somebody else's 2nd generation IPOD nano and it was immediately recognized and happy. So this is clearly some kind of 3rd gen IPOD nano issue and likely some kind of software issue that has recently happened.

    Mate i have had this problem for ages managed to sort it with itunes 7.4 but i have the problem again.
    It is becoming very frustrating to say the least, and no matter what you say on these forums or the amount of times i have emailed apple i dont get any answer.
    I basically have over 100 punds worth of equipment on myy desk which is a waste.
    And no one is helping from apple.

  • HT1447 My ipod nano 3rd generation does not appear as a device on my Windows 7 on the new version of itunes. Only the music that I have purchased from itunes in the past shows on the screen.

    My ipod nano 3rd generation is not recognized by my Windows 7 laptop when I plug it in under itunes latest version

    Hi Matt00,
    thank you for your response. I followed the steps you suggested, but still no luck.   Is a the fact that I am using a notebook a problem? I have been doing more searching and it seems my HP Pavilion Notebook does not have a firewire port? 
    Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
    Hewlett-Packard HP Pavilion 17 Notebook PC
    iTunes 11.3.1.2
    QuickTime 7.7.5
    FairPlay 2.6.15
    Apple Application Support 3.0.6
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.1.2.6
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number xxxxxx
    Current user is not an administrator.
    The current local date and time is 2014-08-23 22:37:26.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 11.3.1.2 (x64) is currently running.
    iTunesHelper 11.3.1.2 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    No Universal Serial Bus Controller found.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    IPOD (G:\), iPod nano (3rd Generation) running firmware version 1.0.3
    Serial Number: xxxxxx
    Bus Speed: 61440
    Most Recent Devices Not Currently Connected:
    iPhone 4S running firmware version 7.1.1
    Serial Number: xxxxx
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

Maybe you are looking for

  • SAP_PROXY_ESR: Problem with the 'Connection Test' on transaction SM59

    Hi, I have a problem when eject the 'Connection Test' command on Transaction SM59. I made the RFC Destination SAP_PROXY_ESR with: Technical Settings Conection Type: G Target Host: my_host Path Prefix: /rep Service No: 1080 Logon Security Basic Authen

  • Is there a way to replace re-sized images?

    I have several images (640 x 480) that I have placed into a PDF. When I use the Object TouchUp Tool, (right-click and choose "Place Image...") they come in WAY too big for the layout, so I scale them down to fit. Now, I need to replace those images w

  • How to change the width of the bar of bar charts?

    Hi, I am using Crystal Reports 11. I created some stacked bar charts. Now, I want to change the width of the bar. Some one told me that I can't do that because it's totally controlled internally by Crystal Reports. Really? If could, how could I do? T

  • XML scrolling thumbnail, image loader, & Buttons [halfway works]

    Intro: I started a flash-based website a few years ago. Back in 2006 I was able to get a xml scrolling thumbnail, image loader to work without a glitch. For numerous reasons I had to put the project on hold until now. [one was that my 30 day trial of

  • Conditionally enabling data fields

    hey guys,i have a select control with two options(house and land)and i have twelve fileds for installment payments.now i want all the twelve to be active when the "house" option is selected and only the first six fields when "land" option is selected