3rd generation nano frozen and won't reset

I have a 3rd generation nano, that is about 3 weeks old. It is frozen and it won't reset. I've reset before with no problem, but for some reason it won't reset anymore. Any tips?
Carrie

I've successfully reverted to 1.0.1 using information in the Mac OS thread. Go to:
http://discussions.apple.com/forum.jspa?forumID=1213. It has all the guidance you need to revert to 1.0.1. Below is part of my recent post within that thread.
"I downloaded the two 1.0.1 files (iPod_26.1.0.1.ipsw" and "iPod_26.1.0.1.ipsw.signature) provided on this thread by "Alain Claude Cl..." (http://discussions.apple.com/profile.jspa?userID=1036653). Many thanks Alain. I followed his instructions, also in this thread, for installing them. I also found the posts from "sottil" (http://discussions.apple.com/profile.jspa?userID=1033843 ) to be extremely helpful.
Thanks to everyone in the thread who kept this topic going. Until Apple gets its act together and issues 1.0.3 or 1.0.2.1 or whatever, the only solution is to revert to 1.0.1 following the guidance in this thread.

Similar Messages

  • I have a 3rd generation nano ipod and after connecting it to my mac to sync my calendar, it said it no longer would sync the calendar.  What's up with that???

    I have a 3rd generation nano ipod and after connecting it to my mac to sync my calendar, it said it no longer would sync the calendar.  What's up with that???

    Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

  • My Ipod nano 7th generation turned off and won't turn back on. what should I do?

    my Ipod nano 7th generation turned off and won't turn back on. what should I do?

    If you have done the reset and nothing appears and you are sure it still has a charge and it doesn't turn on, you may request for a replacement if it still covered by the warranty. Cheers!

  • My iPod nano, 5th generation is frozen and will not respond. There is a charge, was just used 2 hrs ago, and has a song showing on the face but will not turn off or respond

    MMy iPod nano 5th generation is frozen and will not respond.  There is a picture of a an artist on it, it has a charge, was used fine 2 hrs ago, won't turn off ?..

    Good Afternoon CPilkington1,
    If your iPod nano is unresponsive, follow the troubleshooting steps below:
    Apple - Support - iPod - iPod nano (5th generation) Troubleshooting
    http://www.apple.com/support/ipod/five_rs/nano5gen/
    If the issue is not resolved after following the steps outlined in the Troubleshooting Assistant, please reply to this post with additional information or any error messages that may appear.
    Regards,
    - Judy

  • HT1320 My ipod nano is frozen and I cannot reset it.  How do I reset my ipod?

    I have an ipod nano that I purchased in 2009.  I believe it is a 5th generation.  It is frozen and I cannot reset it.

    Hey there Tricia9170,
    It sounds like you are unable to use the iPod Nano becuase it is unresponsive. Verify that this is the reset you have performed:
    To reset your iPod:
    1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
    If so, try restoring it with the following steps in iTunes:
    Note: Because Restore erases all of the songs and files on iPod, make sure toback up any files you've saved on the iPod disk. All of your songs, videos, podcasts, audiobooks, and games can be loaded back to your iPod provided that you have them stored in your iTunes Library.
    How to restore your iPod:
    1. Make sure you've reinstalled the latest version of iTunes.
    2. Open iTunes, and then connect your iPod to your computer.
    3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.
    4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
    5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
    Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
    Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
    Restore Option 3: Use Newest Version - Restores with the latest iPod Software on your computer.
    Restore Option 4: Restore and Update - Restores with the latest iPod Software on your computer.
    Note
    : For Mac users, A message will appear prompting you to enter an administrator's name and password.
    6. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
    7. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
    8. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
    From: iPod nano (5th generation) Troubleshooting Assistant
              https://www.apple.com/support/ipod/five_rs/nano5gen/#
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • 3rd Generation Nano only gets Apple logo on main screen need a full reset?

    Was just given a 3rd generation nano for one of my kids.  I cannot seem to unlock it (apple logo only on screen).  Need to reset.  When I hold down menu and center button, it just goes back to apple logo.  Am I out of luck?

    Try manually forcing the iPod into disk mode using the instructions in this Apple support document and restoring it in iTunes.
    Putting iPod into Disk Mode
    B-rock

  • I downloaded a recommended update and since then my ipod touch (3rd gen) is frozen and wont turn on (1604 error)

    I downloaded a recommended update and since then my ipod touch (3rd gen) is frozen and will not turn on. I try restoring factory settings but the process terminates with a 1604 error. I have researched this problem on the net and think i have tried everything, but still no joy. I have tried removing all apple and itunes software and reinstalling, updating the apple drivers - nothing has worked. I am using itunes 10.3 on my pc, windows xp.
    If anyone can help me i would be extremely grateful - I am off on holiday on thursday and would love to have my ipod with me!
    Many thanks in advance.
    Craig.

    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for error 1604.
    When prompted, click OK.
    Close and reopen iTunes while iPhone remains connected.
    iPhone should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Above is from:
    http://support.apple.com/kb/TS3694

  • 3rd generation nano entire contents of ipod not showing up..

    3rd generation nano entire contents of ipod not showing up, itunes says to restore, however I am pretty certain this erases all contents. Is there anyway to retrieve the seemingly lost content, what do I do? I have had little to no prior issues with this product and have not recently updated my itunes. Please help!

    Hey there,
    A file or some files may have become corrupt somehow during connecting or disconnecting the unit. Try putting it into Disk Mode and see if that helps. To put it into Disk Mode, hold the Menu and Select buttons until the Apple logo appears. When it does, immediately press and hold the Center an Play/Pause buttons until you see a confirmation that your iPod has been put into Disk Mode.
    If you are able to do this, it may be a good idea to restore the iPod to its original settings. Keep in mind that by doing this you are erasing all the music and files from your iPod so make sure they are backed up on your computer somewhere. More on restoring your iPod can be found in the Apple document below.
    Hope this helps.
    http://support.apple.com/kb/HT1339
    B-rock

  • 3rd Generation Nano playing songs slow with static.

    I have a 3rd generation Nano and I have noticed that it has been songs a bit weird lately. It is not every song but rather every few songs. What happens is the song slows down with some static too. I equate to a record playing on a slower speed than it should. I am not quite sure what is going on...please help.

    The songs were purchased from iTunes therefore I do not believe that they are corrupt. May I ask how a song can be corrupted?
    I am assuming that a visit to the Genius Bar is order, correct???

  • I have a 3rd generation wifi iPad and there is no sound in the device. Can someone please help?

    I have a 3rd generation wifi iPad and there is no sound in the device. Can someone please help?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can’t hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

  • Nike+ compatible with 3rd Generation Nano

    Hello ...I have been using Nike+ on my 2nd Generation Nano for just over a year with no problems ...unexpectedly I have got my hands on a 3rd Generation Nano ...my question is can I use the same Nike+ kit with the 3rd Generation Nano? ...or have the Nike+ kits been updated therefore meaning I'd have to buy a new one?

    There are a couple of different model numbers out on the packaging from nike and apple.
    With that said, both will work. There should not be any problem.
    Hope this helps.

  • 3rd generation nano hates certain songs!

    I am sure that this question has been posted before but - here it goes. It seems that my 3rd generation nano randomly stops playing musical tracks for no apparent reason. A song will be playing and before the song is over nano stops the tack and proceeds to the next. Whether I am shuffling songs, playing an album - whatever, it just randomly cuts a track short.
    I have tried restoring it to no avail.
    Any wisdom or advice out there???
    Thanks so much!
    Mark

    The songs were purchased from iTunes therefore I do not believe that they are corrupt. May I ask how a song can be corrupted?
    I am assuming that a visit to the Genius Bar is order, correct???

  • I need an earphone lanyard for my 3rd generation nano.  Will the lanyard for the 1st generation nano fit my 3rd generation nano?

    I need an earphone lanyard for my 3rd generation nano.  Have searched the internet and cannot find one.  Can find one for the 1st generation nano.  Does anyone know whether or not the lanyard for the 1st will also work on my 3rd? If not where I can purchase a 3rd generation lanyard?  Thanks for everyones help!
    Johnette48

    You aren't required to do so. You can choose not to use the speaker dock or you can return the Nano.

  • Iphone 4s is frozen and won't turn off.  How do I turn it off if the button at the top doesn't work?

    My iphone 4S is frozen and won't turn off.  Is there another way to reboot or turn off the phone besides the button at the top?

    Try to Reset your device. 
    Press and hold both the Sleep/Wake button (I know you think it's broken, but try) and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off that shows up first).

  • I have 3rd generation iPad retina and it seriously overheats?

    I have I pad 3rd generation retina display and purchased this after 2nd generation was stolen and found overseas (had no home insurance) as recently was going through a bad 24 year marriage divorce and had to stop working a month later due to illness cancer.  I had to use last of savings to replace my sons iPad. As I was ill I did not really use the new I pad for at least six months my son who it belongs to was 11 years old and as I put it in leather case and had rules about charging whilst using iPad ( meaning He Was Not Allowed To USE whilst on charge) I did not notice the problem in the beginning although after that noticed iPad 3 seriously heated whilst charging and also prolonged use this has became more and more of a problem lately to the stage where you can't use it for more than 20 mins without actually hurting your hands. My granddaughter who owns her own iPad 2 picked up my iPad recently what was charging in my sons bedroom without a case or cover and she got that much of a shock when she picked it up that dropped it and cracked the screen. Apart from that her eight finger tips were red and on one hand tiny blisters were apparent on two fingers surely this is a problem. And as not in warranty this does should not affect my statuary rights as a consumer under consumer laws can anyone help ?

    Hi Mich10,
    Your situation is definitely a problem, you have my sympathies. I can pretty much be sure that Apple will at least want to hear about this. I don't know what they will do but any iPad that overheats enough to burn someone they want to know about. 
    Contact Apple using www.apple.com/support/contact if you are in a country that supports it or call the appropriate phone number on this page. Alternatively carry the iPad in to an Apple retail store or service provider. Tell them exactly what happend. Apple is always concerned about the safety of their customers.

Maybe you are looking for

  • Trial Adobe Flash CS4 Don't Work...

    (First,Sorry for my english,french forum don't work or don't find it...) I install the first time CS4 Profesionel and when i opened it normaly after accepted 30Day trial, an error arrived and i didn't can opened CS4 =( I download it second time, and

  • How to install Chinese in Oracle Application Express 4.0?

    hi,all I want to know how to install Chinese in apex 4.0,though I know it's in the folder of "apex/builder/zh-cn",when I use a command like "@ load_zh-cn.sql",and it doesn't work. and the path is >>>>>>>>>C:\oraclexe\apex\apex\builder so what can i t

  • FBO1L transaction in RFBIBL00 program

    Hi all, For New GL postings (parallel ledger) we need to post using transaction FB01L. Can we use RFBIBL00 (batch mode) to call FB01L, because in the documentation given for program RFBIBL00, nothing is said about FBO1L? Thanks, Sruthy

  • Doubt in file to rfc to mail scenario

    Hi All, I have a doubt in configuring File2Rfc2Mail scenario, Actually my requirement is to send flat File to RFC, and trigger mail alerts for successfull execution , like after successfully posting the mesg to rfc i need to trigger a mail alert to m

  • Keynote to Quicktime export

    I currently have keynote '09 and am having trouble producing a video that works on an HD TV. It does not seem to matter whether I use 1280x720 or 1920x1080 when I export it as a quicktime movie and specify HD the movie never plays right on the TV. It