3rd Part Loops in the Loop Browser
Hello all!
I purchased a bunch of M-Audio percussion loops and installed them (or thought I did). Only I set of loops is listed in the loop browser drop down menu ant it's only listing 2 loops! I found 2 other folders of loops in my home folder/audio/user loops folder. They appear to be incomplete as well and they DO NOT show up in the loop browser menu in GB or Logic. I e-mailed M-Audio about it and they say that there might be multiple locations for these loops depending on what version of GB I'm using (3).
Anyway, what do I do now? Should I trash the loops in the user folder and then try a reinstall? If I do, can I put them in some other folder that GB can access from within GB?
Thanks,
Paul
First suspect:
http://www.bulletsandbones.com/GB/GBFAQ.html#missingloops
Similar Messages
-
Adding loops to the loop browser.
I'm using mac os 10.4.11. I have placed all my loops on an external hard drive.
1) Are only apple loops allowed to be added or aiff loops in general as well?
2) when adding loops to the loop browser should one add an entire folder if they are in a folder or just the files within a folder? I added a folder of flutes but can not find flutes anywhere in the loop browser file list.
3) As I didn't want the loops within the jam pack voices, and rhythm section installer packages to be added to garageband I removed the loops folders from the packages, and dropped them onto the loop browser. When looking in the jam pack management it shows the rhythm section but not the voices. When I again attempted to drop the voices folder it said it was already there, although I still can't see it.
4) Once I understand how to do this correctly should I trash the loop browser apple loops index file and re-drop all the loops on the browser again to get everything cataloged correctly?
Thank you,
RobertSelect "Add to Loop Library" from the Edit menu!
-
How to avoid the loop inside the loop? as it reduces the performance.
hi masters,
i have 2 internal tables having 1 same field. eg table itab having f1, f2, f3 fields and itab1 having f1, f4 and f5 fields. let us consider the data in the itab and itab1 is like below given
itab-f1 itab-f2 itab-f3 itab1-f1 itab1-f4 itab1-f5
10 aa 11 10 abc 456
10 bb 15 10 def 655
10 ff 13 10 ghi 456
11 dd 16 10 tre 455
11 zz 24 11 ftr 256
11 ii 54 11 kjh 556
12 hh 24 12 fjk 751
now i want the result in final table like below
f1 f2 f3 f4 f5
10 aa 11 abc 456
10 aa 11 def 655
10 aa 11 ghi 456
10 aa 11 tre 455
10 bb 15 abc 456
10 bb 15 def 655
10 bb 15 ghi 456
10 bb 15 tre 455
10 ff 13 abc 456
10 ff 13 def 655
10 ff 13 ghi 456
10 ff 13 tre 455
11 dd 16 ftr 256
11 dd 16 kjh 556
11 zz 24 ftr 256
11 zz 24 kjh 556
11 ii 54 ftr 256
11 ii 54 kjh 556
12 hh 24 fjk 751
i can get this result using the
Loop at itab.
loop at itab1 where f1 = itab-f1.
process....
endloop.
endloop.
but it is very slow. i want to avoid this loop inside the loop and i want to implement the same program using read table.. like below..
Loop at itab.
Read table itab1 with key ....
process...
endloop.
Is it possible? to get multiple records from itab2 using read statement or with READ statement that using CASE Statement or IF statemetnt.
Plz help me...hi,
please try the following code
TYPES:
begin of ty_itab2,
f1
f2
f3
f4
f5
end of ty_itab2.
DATA:
lw_tab2tmp type ty_itab2,
lt_tab2tmp type standard table of ty_itab2.
sort it_itab by f1.
loop at it_itab into lw_itab.
at new f1.
CLEAR lt_tab2tmp[].
loop at it_itab1 into lw_itab1 where f1 = lw_itab-f1.
CLEAR lw_tab2tmp.
move-corresponding lw_itab1 to lw_tab2tmp.
append lw_tab2tmp into lt_tab2tmp.
end loop.
"while there is no data with f1 in it_itab1
if lt_tab2tmp is initial.
lw_tab2tmp-f1 = lw_itab-f1.
append lw_tab2tmp into lt_tab2tmp.
endif.
end at.
CLEAR lw_tab2tmp.
MOVE-CORRESPONDING lw_itab to lw_tab2tmp.
modify lt_tab2tmp from lw_tab2tmp TRANSPORTING f2 f3 where not f1 is initial.
append lines of lt_tab2tmp into lt_itab2.
end loop.
lt_itab2 is the final table.
There may be some syntactically errors.
I have not a system to test it now, please test it. -
Problem previewing loops in the loop browser in Logic 8
Loops are only audible when the sequencer is not playing.
When the sequencer is playing, the selected loop shows it's playing in the loop browser window, but I cannot hear it.
ANY ANSWERS?
NOTE:
All my outputs in logic (including the loop browse strip) are routed to SPDIF OUT as I have a DynAudio digital speaker system.
Thanks in advance,
HennieI have found if you wait long enough, you will hear the file begin to play. Sometimes the delay can several seconds. Not acceptable IMO.
-
Student lost ability to audition loops within the loop browser
Colleagues,
My students were composing songs using GarageBand 3.0.4 in our Mac Lab.
Two of my students showed me that, after they'd laid down three or four tracks by dragging loops into the main window, they could no longer get loops to play inside the loop browser. They would click on a loop, and nothing would happen.
The loop would play once it was clicked and dragged into the window, but it would not play from inside the loop browser.
Does anyone have any idea what my students might have done that could cause them to be unable to audition loops from within the loop browser?
Thanks in advance for any insight you might be able to provide.
Paul Daniels
Pennridge Central MS
144 North Walnut Street
Perkasie, PA 18944Just drop them on the Loop Browser and the rest should be taken care of.
-
When I Drag Loops To The Loop Browser...
All my loops are in the folder /Library/Application Support/GarageBand/Apple Loops. I dragged them over from the finder to the loop browser in GB, and it looks like it copied all of them to another folder user/Library/Audio/Apple Loops/User Loops/GarageBand/Apple Loops. ***?! What a mouthful. Is this the new default location for all of my loops? Can I change that? Can I erase the Application Support/Garageband folder now? I would like to reclaim the 12+ GB of space.
As far as I can make out GB needs to store your loops in both Application Support and Audio. The Application Support/GB folder also contains other resources, such as software instruments and channel presets etc., so DON'T DELETE IT!!
In the Audio folder the GB loops will normally be stored in Apple Loops/Apple/Apple Loops for GarageBand, not in the User Loops Folder. When you dragged them to the browser, GB thought they were a new set of loops and put them in User Loops; so as long as they are still in Apple Loops/Apple/Apple Loops for GarageBand, go ahead and delete them from the User Loops folder. Like I said above, GB seems to store the loops in two locations by default (no Idea why), and I think it's best not to screw around with stuff in the Library under OSX.
BTW, why did you drag them to the browser in the first place? Had they not appeared there when you installed? -
Apple Loops and the Loop Browser
maybe I'm missing something here, but whenever I save an edited audio file (or loop) with Apple Loops I can never seem to find the same file in the Loop Browser.
(unless that is how the app is suppose to behave ...)
I assumed the Loop Browser behaves somewhat like Logic's Project Manager, referencing and finding files that are associated with Logic Sessions.
Long story shot, how can i save my edited Apple Loop files and still find them using the Loop Browser
Thanks.The additional content is not just the loops. It is also all the samples for the instruments etc.
You are correct, however, in the method of moving the loops. -
I can't find converted apple loops in the loop browser within Logic pro 7
Hello There.
I've cereated some apple loops with the apple loops utility. unfortunately I am unable to find them in the loop browser within Logic pro 7.2.1.
I've scaned them using the project manager " so Logic knows about them"
but still didn't reflect in the loop browser.
Is this the normal behavior or what am I doing wrong.
I hope I am doing something wrong, as to me the main feature of the loop browser is to be able to audition the loops quckly at the song tempo.
Thanks a lot in advance
Cheers
P.S searched in the Forum but the answers arn't very clear
Powerbook G4 Mac OS X (10.4.7) 1.67 Mhz 2gig RamJust drop them on the Loop Browser and the rest should be taken care of.
-
How to pass a value from inside a while loop outside the loop
Hello to everybody, I have been searching through the forum but I have not found a certain answer for my problem. I would try to explain my problem as breefly as posible:
I have to send by a BNC2120 two signals and acquire an other one thats comes from a preassure sensor. That part is done by introducing simulating and acquiring DAQmx inside while loops.It is sycronized by my self, proving such diferent values (is not the optimum, but is only the first prototype) and works as I expected. Well, then I want to sample some of the values of these signals, that is done with relays and local variables to get the value in the instant I want to sample. Here begin my problems: I want to extract the sample values out of the while loops without restarting them, I mean: I do not want to stop the while loops because the acquisition and the generation of the signal must be continuous, but I do not know if it is posible to put the while loops in "standby" until I operate with the values I have sampled and then the signal generator and the acquiere continues from when it has stoped before. Particulary I want to obtain the value of the top while loop (inside a case) when the counter arrives at 15.
I have proved to do with local variables, global variables, making a state machine, with event cases, with flat secuences...I have been reading about and proving diferent posible solutions for this week and the whole past week and I have not found the solution.
If any of you know how I can do this thing, I would be loved to listen your opinions. My proyect is above:
Thank you a lot in advance.
Sinceresly,
Miguel.
Attachments:
maq_estados_event_case.vi 239 KBIt definately sounds like what you really want is a Producer/Consumer. It is an architecture that uses Queues to pass data from a data generation loop (producter, your DAQ loop) and a data processor (consumer).
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
I'm Still Looping - End the looping!!
I wrote an earlier post, received a good suggestion, and
found that it isn't working for me. I created a slideshow that has
the following characteristics:
1. An embedded .swf title graphic that appears on the first
and last slide. I want it to play once than hold, but it just keeps
looping.
2. Each slide has text and a picture that fades in over 120
frames. I'm using Timeline effects to fade-in the picture. I'd like
the picture to fade in, then remain visible. What happens is that
the pictures just keep looping.
I've unchecked loop in Dreamweaver properties when I inserted
the flash graphic. I've also tried to "uncheck" all the loop
options.
A kind responder suggested that I use action script to insert
stop() in a keyframe at the end of the graphic's frames, but this
isn't working - the Timeline effects don't play at all with this
command insterted.
Help.Post the FLV and it will be easier to answer. At the end of
each movie clip you just need to add a keyframe and put in a
stop();
Make sure the stop is on a keyframe at the end of the of the
movieclip, don't just click on the last frame and add the
actionscript. It has to be keyframed or it will use that stop(); on
every frevious frame.
If that isn't working then something else is causing the
error. -
Can the loop browser be modified with ones own way of sorting loops
It has become a burdeon and very difficult to work effectively with GB3 loops. Can i somehow name the different categories my own way! like electric guitars distorted, elec gtrs riffs,
changing the name of these NONHELPFUL categories to suit my own HD arranged loops. In using this loop browser it takes so much time to find what im looking for and this could i think be made easier if i could make my own categories in the browser. Im asking for too much arent i?
do all of you use the favorites?
that would be too cumbersome also.
no way around all this overwhelming amounts of sounds loops fonts. How do you all arrange this in an orderly fashion or do you just use ten basic instruments/loops?
would like to hear from you allDo you really have only one copy of each? Do a Finder/Spotlight search. There are several places where the loops could show up:
- the general Library/Audio folder
- the user Library/Audio folder
- the general Library/Application Support folder
- the User Library/Application Support folder
Did you install over an old version of GB? That might explain the duplicate loops. And the "single" loops that were either part of your old installation and not of GB3 or vice versa.
In order to repair that, you should trash the duplicate loops and the content of the Loops Index folder and then drag the remaining loops into the loop browser. -
Loops appear twice in the loop browser. Huh?
I just installed iLife '06 and have been "messing around" with the various programmes. One thing I noticed was that exactly the same loops appear twice in the loop browser. Not all loops are doubled, which is obviously what is confusing me. Is this normal (not my confusion!!)?
I've checked the folder in the library and each loop is only available once, but GarageBand insists on having two of quite a number of loops. Any tips would be greatly appreciated, as I haven't found any way to delete just one of the loops (deleting the file obviously deletes both . . .)
Thanks in advance,
Steve
G5 Dual 2.3, G4 Powerbook Mac OS X (10.4.3)Do you really have only one copy of each? Do a Finder/Spotlight search. There are several places where the loops could show up:
- the general Library/Audio folder
- the user Library/Audio folder
- the general Library/Application Support folder
- the User Library/Application Support folder
Did you install over an old version of GB? That might explain the duplicate loops. And the "single" loops that were either part of your old installation and not of GB3 or vice versa.
In order to repair that, you should trash the duplicate loops and the content of the Loops Index folder and then drag the remaining loops into the loop browser. -
Deleting from the loop browser
Is there a way to delete loop names from the loop browser drop down list and the actual loops themselves? I inadvertently (sp?) added loop folders that I had bought and downloaded to the loop browser without first naming the loop folders being added. So I now have a few generically named "apple loops" in the loop browser drop down list. I have since renamed the original folders and added it to the loop browser. I now have 2 copies of loop names in the drop down list; the only difference being the generic "apple loops" as opposed to the specific name of the loop folder added. I'm assuming I also now have two copies of the loops themselves since the names in the drop down list are different, which, of course, means more HD space being taken up. I cannot find anything about deleting this. I can't believe there isn't a way to do this. Any help?
Stevereindex your loops:
http://www.bulletsandbones.com/GB/GBFAQ.html#reindex
(Let the page FULLY load. The link to your answer is at the top of your screen) -
How can I access the value of a loop index outside the loop?
I have a sequence structure in Labview 8.6. At one frame of the sequence I have a while loop. The loop runs for a while and then stops and the program then moves to the next frame of the sequence. Several frames further on down the sequence I have a cluster, the elements of which are outputs on the front panel. The index of the mentioned loop is one of the cluster elements, an numeric output. While the loop is running, I want the index to be displayed on the front panel in the output contained in the cluster. How can I do this?
The easiest way to do this is to use a local variable of your cluster. You'll need one copy set to read; connect that to a bundle by name, bundle in your index value from the loop, and wire the bundle output to a write copy of your local variable. You can create a local variable by right-clicking on the cluster terminal (in the block diagram) and choosing create local variable. You can change the local variable to read or write by right-clicking on it.
However, in general the use of both local variables and sequence structures is discouraged, and the right solution may be to rewrite your code with a while loop containing a case structure in which you update the cluster every time through the loop. This will look like a state machine; you'll also need a shift register in place of the loop iteration counter. If you post your code (ideally the VI, but if not then a screenshot of the block diagram) then we can provide more useful assistance. -
Adding to the loops folder/software instrument folder/components etc
i was screwing my whole GB system by messing with the entire folders labelled
like instrument library (dragging in a new one replacing the old one).
thus i kept getting "cant find application bundle".
the RIGHT/way to add software instruments, sf2's, components ( AU plug ins )
is to go to the folder that houses them and delete or add them there.
To add loops you drag the new loops over the loop area on the GB interface.
You do not replace whole loop folders with new ones. If i buy third party
or update computers that have additional software instruments i get them by
going to the exact folder that houses the SI's and add them there. Is this all correct? because this may sound basic but i have thousands of loops and alot of SI's and i must learn how to add these to additional computers or the same one?
please instruct me.djkoz1978 wrote:
Issue 2. When I'm plugged into charge my phone and if I try to unlock my phone using the pattern security method what happens it when I try to draw the pattern it keeps acting like instead of sliding to the next dot it turns red like I'm lifting up my finger. And of course if you do that to many times it locks you out of your phone or you have to log into your email to unlock your phone. This is a minor issue all you have to do is unplug your device then unlock it. But I felt maybe Verizon needs to know.
These are some of the issues I have noticed again would like Verizon to know about them. Thanks for taking the time to read. I really hope I explained this so you could understand.
This is the only real issue I have had with the phone and I am not sure why this happens. I ended up changing mine to the code entry lock, which works well. My fear is getting completely locked out and having to do a factory reset. Other that this, I have had no other problems with mine.
Maybe you are looking for
-
We have version 10.5.8 photoshop CS3 for Mac. How do we fix a problem with photoshop not resizing dpi? For example we resized a 72 dpi image to 200 dpi, when we do a pdf analysis it read as 344 dpi.
-
Problem reading Photos on 6230i
I have a 6230i and have taken,read and saved photos in the past using Lexmark P6350 printer with MMC slot. This time printer says it cannot find any photos and the card should be formatted. How do I do this? Can it be done without losing the photos?
-
Windows 2008 Remote Desktop Services - Word Spell Check
We are running Windows 2008 servers on our network with remote desktop services (terminal services). We currently experiencing a challenge with Word 2010. The spell check feature is not working, when you try and run it gives an error "Microsoft Word
-
Reproducible Shockwave player error under Mac OSX 10.6.3
I develop Shockwave "jigsaw" puzzles with Director. Sample at kayingleside.com. My clients are experiencing problems with the most recent Shockwave player under Mac OSX 10.6 Snow Leopard. Play a jigsaw at the above web site to experience the probl
-
RH_STRUC_GET change version 4.6 to 6.0 lose of data
Hi, i'm using this function module "RH_STRUC_GET", and i found an error with the same parameters in the 4.6 and 6.0 version and the same data in the tables, the function import a table with 58 results in 4.6 version and 57 in the 6.0 version. the ev