3rd Party adapter on different JVM

Dear Experts,
We want to buy a 3rd party adapter for SFTP as that is not supported in standard SAP PI, we are on SAP PI7.0. Can we install the 3rd party adapter on a separate JVM and use it in ID?
The adapters we are considering are Advantco & Aedaptive.

Hi Uday,
We have used Advantco SFTP adapter without any issues. We have deployed it in PI and it work fine.
Thanks,
Siva Kumar

Similar Messages

3rd party adapter integration into XI

Dear Experts
I wanted to know how 3rd party adapters are integrated into XI?

Hi Dheer,
There many third party adapters available in market.
One example is seeburger:
U need to follow the below steps for integration into XI:
For the same requirement you need to follow the below steps:
1) First deploye the Std seeburger mapping provided by see burger on XI
2) If you are using the AS2 adapter then you have to install the AS2 server on XI server.
3) Once you install the std seeburger on SAP XI server you will see the AS2,X400,OFTPS,VAN adapter on XI ID.
5) You need to call the std mapping in the adapter module which does the conversion from EDI to XML and XML to EDI.
if u need process then let me know I will send u the configuration threads which is required for integration.
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
Brief about seeburger:
Seeburger adapters like OFTPS,AS2,X400 are used for B2B scenario where the file is coming through WAn network or mailbox. As XI dont have capability to convert the EDIFACT format file to XML the same work will be done by seeburger adapters.
The SEEBURGER Business Integration Converter (BIC) is an any-to-any format converter, used to translate EDI data and legacy data formats into XML and vice versa. It can also be used for complex, high performance XML-to-XML mappings or to interface to existing JDBC data sources.
Supported EDI formats include:
ANSI
EDIFACT
INHOUSE
IDOC
XML Schema
XML DTD
CSV
Delimited Data
positional data
SWIFT
EANCOM
and many more.
See for converting the EDI XML to EDI and XML-EDI you need to have a seeburger mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
refer belwo weblog:
/people/nithiyanandam.au2/blog/2008/02/20/handling-edi-interfaces-using-seeburger-bic-modules
Thnx
Chirag
Edited by: Chirag Gohil on Feb 25, 2008 12:51 PM

EJB module for a 3rd party adapter not getting called

Hello All,
I have written and adapter module EJB code and calling it from Sender 3rd party Ariba cXML adapter.
This EJB is successfully build and deployed on the server but after I added it in channel in ID....the cXML channel stopped picking up the messages. When I removed the config from the channel, it started working again.
I think its a known bug in Ariba adapter that the audit logs can not be seen in RWB so it has made it more dificult for me to trouble shoot.
How can i check if the adapter was called at all and what went wrong ?
Is there a different way of adding custom modules in 3rd part adapters ?
Please help.

Hi Ranjeeth,
Even I had same issue...after lot of debugginh realise path specified in CC for calling adapter module was incorrect...please check if you are pointing to correct location where you have deployed your module...
Check this doc here:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a
According to it, if you properly configure the ejb-j2ee-engine.xml file, then you'd call your module using "localejbs/<JNDIName>".
Hope this will help.
Nilesh

Sales analysis w.r.t 3rd party processing with different vendors

Hi friends,
I am new to this group. My requirement is to find list of materials ordered by customer procured by different third party vendors.
e.g There is a sales order from a customer and I have items of which 2 are procured from a 3rd party Vendor and 1 item is produced.
Is there any transaction through which shows how much we procure and how much we procured from 3rd party vendor
Please help
Thank
Best Regards
Santosh

Hello,
no there's not a transaction showing the information you need. You can build a query or a report, according to the level of complexity, to get the information.
On top of that you should consider this:
if the materials procured externally have different codes than materials produced, with transaction ME2M you can get the list of Purchase Order items according to the material code;
if, as often it happens, in Sales Order, you have an item category dedicated to 3rd party items, you can extract from table VBAP the list of Sales Orders items with that item category, and get material codes and quantities of materials procured in that way;
Best regards,
Andrea

EDI- PI- IDOC without using 3rd party adapter

I want to know if EDI generated flat file (from gentran for example) can be mapped to IDOC file for ECC using PI (inbound ABAP proxy at ECC). Assume there is no third party adapter eg. Seeburger in PI landscape. The created IDOC file at ECC application server can then be posted into ECC using FILE port (partner profile at ECC). Anyone accomplished this in past, please share the experience. Appreciate the feedback.

Hi Aamir,
I have an EDI file which consists of data in a single String,and the string consists of several ~ separators and * as of a normal EDI structure looks like.
Eg: ISA---------*--*---~GS--*---*---**-----*~ and so on..........up to IEA in a single string.
This can be achived by using the FCC?
Please let me know and provide some info.
Thanks

S-Video/Composite Video via VGA with 3rd Party Adapter

As mentioned elsewhere in these discussions, the Mini-DisplayPort on the Aluminum MacBook is different from the eartlier models. The Mini-DP adapters from Apple don't support S-Video or Composite Video, even in combination.
I ordered and just received my Grandtec PC to Video EZ adapter. It is a bit klugey, requiring a USB connect for power but it supports Apple Mini-DP to VGA output and generates both S-Video and Composite (yellow plug) video.
The good news is that it WORKS. A bit pricey - Apple VGA adapter was $29 and the PC to Video from Dobbs Electric was $39.99 + shipping. But, the alternative was unacceptable. It may not be HD but at least I can do my job in a variety of sites where most of the video devices are older.

Dear Popster41,
I found myself in the same situation you were when you posted this. Could you tell me where you found the converter you mentioned?
I appreciate your help,
Erwin

Playbook won't charge with 3rd party adapter

I have a new Playbook plugged in to a Lenovo slim adapter with a micro-USB tip. I use this same adapter to charge my Blackberry (it has dual charging capability so I can plug my laptop in at the same time).
The issue is that although the Playbook shows it is plugged in (lightning bolt across the battery icon), the charge doesn't increase, and actually seems to go down ever so slightly.
I always thought that USB was USB (i.e. 5V), but that appears not to be the case. Any thoughts?

You need to use the charger that came in the box with the playbook, it is rated at 5v 1800mA. If you use another adapter, even though it is microUSB, it wont have enough capacity (current wise) to charge a playbook and a laptop at the same time, it wont even be able to keep the charge, because is splitting the current with two loads. Voltage and Current are two different things. Same voltage doesn't mean it can charge many devices at the same time, unless the rated Current of the charger is enough for the loads, i.e. three devices rated at 5v 300mA can be charge with an adapter rated at a max Current of 1500mA, 5v, because is overdesigned for the loads.
In a playbook in particular, the more current the adpater has (with a constant 5v) the faster the battery gets charged.

3rd Party Power Adapter that works properly?

My original Apple power adapter has failed like many others do prematurely - the cord breaks down where it enters the block. I bought a 3rd party adapter from ebay (a Delta electronics one, in white and wearing official Apple markings) Although it is a 65w, when my 15" PB battery flattened, and went to sleep, the power adapter failed to start it up again until the battery had had chance to recharge some. So, this adapter is no good, and is going back to the seller. Does anyone know of a cheaper (Apple's own is ridiculously expensive at nearly £60) adapter that really does work with the PowerBook? By "work" I mean will it start up the machine from flat-battery-induced sleep.
Many thanks - if not, it looks like I'll have to pay for another Apple-Short-Life Charger!
Cheers
Chris
4 iMacs,PB15,PB12,6iPods,2iBooks,4XP PCs Mac OS X (10.4.8)

I have used three different adaptors, other than Apple's. Unless you are lucky, I suspect you will get what you pay for. Try:
http://www.psaparts.co.uk/ (1)
http://www.laptopshop.co.uk (2) I addition I have used Kensingtons fancy brick. Note they have adaptors for aircraft etc so make sure you get the right one.
I have just got and started using a 90W device from "(2)" I like having the spare power and that you can buy extra tips. For 90W and changeable tips (only one supplied as standard) the basic price of £45 plus VAT seems OK. They have smaller power devices.
The adaptor from "(1)" also has spare capacity and kept a Titanium (I know it needs less) alive for days. I have never had to start from a completely dead battery but the power is there with both.
The best supply I have is a Sagem powering my fax. It has been on for two years. I am reconciled to all these supplementary heating devices. My fridge does the same.

3rd party iPhone 5 adapter question

I recently bought the iPhone 5 from AT&T and while i was there they said something that if i were to used a 3rd party adapter to charge my phone, i would leave a electric stamp in the phone and would void out any warranty and the same thing for 3rd party cases. Now to me, it sort of sounded like a crock to try to get me to buy thier marked up products but is there any truth to this?
Thanks in advance.

Ok so let's work out how much I need to spend on adapters!
We have 3 iPhone 4's in the house which I would love to upgrade to iPhone 5's plus 1 ipod touch which again I would love to upgrade.
We have 1 speaker dock in the dining room, 1 in the living room and 2 upstairs! Now charging is not a problem cos I will get lightning cables with all the new devices!
All of my docks are on many occasions being used at once!
So I need £120 worth of adapters.... Which to be honest are a bit ugly and I'm not convinced will fit some of my devices!!!
I got about £400 quids worth of equiptment which is now redundant unless I spend another £120!!
I personally am only one of many whos is not happy with having to buy the adapter!
I understand the need to move with times and thik the cable is brilliant! But common I bet it only costs a fiver to make!!!

IMac USB no longer recognizing 3rd party phones (BlackBerry, Android, or Symbian).

Hey everyone, this is my first post to this community support group.
Last week, using my iMac, I attempted to install the Ubuntu OS onto my Nexus 7.
I followed some online guides on how to do so, and realized that I was not up to the task. The process involved various things, although the one I suspect created my current problem was inputing Terminal commands (unfortunately, I can not recall the commands I entered).
Not only was I unable to install the Ubuntu OS on my Nexus 7, but now my iMac does not recognize any 3rd party phones (Android, BlackBerry and Symbinan) that are plugged into the USB ports. Prior to this Ubuntu attempt, my iMac recognized all phones plugged into it's USB ports.
A few things:
1) The USB Device Tree in System Information lists several connected USB devices (iPhone, Printer, External Drives, Etc), but will not display 3rd party phones.
2) The Disk Utility does recognize any phones as hard drives, when they are plugged in via usb.
3) I've tried using the phones' interfaces to switch them from USB mass storage, to camera, to charge settings when plugged into the iMac with no effect.
4) I've tried plugging the 3rd party phones in different USB ports with no results either.
Thank you for any help and guidance you guys might offer!
Jeff

Try doing both a iMac SMC and PRAM reset, it may take several attemps for it to work.

3rd Party Sales Optional ?

Hi-
We have a vendor from which we purchase a material that some times we have shipped to our plant to later reship, and other times we have the material drop shipped.
I would like to separate the process so we can treat the 3rd party shipments as true SAP 3rd party. Is anyone aware of how of process other than the item category to control if it is 3rd party or a normal material. I am trying to find a way where I can process the true 3rd party in a different SAP factory that we use for other sales, but the item category is a global attribute. Thoughts anyone?
Thanks.
-Larry

Hi Larry,
You are right that the third party process is being recognized by item category and corresponding schedule line category.
Have you considered creating seperate item categor or schedule line category?
Thanks and best regards,
Smile

Is there a 3rd Party accessory that solves the moisure issue?

Just wondering if anyone's found a solution to the moisture issues by using a 3rd party adapter (and standard none OEM ear buds)?

http://scosche.com/products/sfID1/210/sfID2/343/productID/1726
http://www.walmart.com/catalog/product.do?product_id=10963091&sourceid=444444444 40183638060

InDesign 3rd party plugin update to CC2014 failed

Dear Community,
I have a following problem: We have developped a 3rd party plugin for different InDesign versions (5, 5.5, 6). The new requirement is to build a new project configuration for InDesign CC2014 in VS 2013. So, I created new configuration by using the settings from InDesign 6 configuration, then I adjusted necessary pathes to sdk and project variables but now I get the following error by trying to compile the project:
1>------ Neues Erstellen gestartet: Projekt: iMatch (iMatch-Plugins\iMatch), Konfiguration: ReleaseCS2014 Win32 ------
1> VCPlugInHeaders.cpp
1>C:\Program Files (x86)\Adobe\Adobe InDesign CC 2014 SDK\source\precomp\common\ShukHeaders.cp(19): fatal error C1083: Datei (Include) kann nicht geöffnet werden: (File cannot be opened) "boost/config.hpp": No such file or directory
========== Alles neu erstellen: 0 erfolgreich, 1 fehlerhaft, 0 übersprungen ==========
I checked the file ShukHeaders.cp by other sdk versions and it has the same include, so I dont understand what could be wrong.
I would very appreciate if somebody could give me an advise that could help me to solve the problem or perhaps a small workaround how I can create new project configuration properly.
Thank you in advance.

The same problem was solved here:
Re: D:\InDesign CC\Adobe_InDesign_CC_Plugin_SDK0108\source\precomp\common\ShukHeaders.cp(19): fatal erro

Receiver Axis Adapter to 3rd party webservice

Hi,
My scenario is ABAP Proxy --> PI --> 3rd party webservice using Soap Adapter with Axis protocal.
I'm getting the following error when attempting to post to the 3rd party web service:
nested exception is: java.net.SocketException: Connection timed out:could be due to invalid address
We do have to go through a proxy server to go outside the firewall. I'm not sure if this may be the issue, but I don't even see where you can set this in the AXIS adapter.
Can anyone shed some light on the topic?
Thanks and regards,
Duke

Configured as stated below, and the issue was resolved.
How can I call some service over an HTTP proxy server?
The Axis's standard and adapter's HTTPSender and CommonsHTTPSender handlers recognize the java's standard network properties (http.proxyHost, http.proxyPort, http.nonProxyHosts) for HTTP proxy setting. Please check that these System properties are correctly set at the J2EE server's System properties page. For more information on how to set Java System properties, please refer to the J2EE server's documentation (SAP Note 710146 How to change J2EE Engine JVM Settings).
Thanks and regards,
Duke
Edited by: Duke on Aug 5, 2010 5:37 PM

IDOC as a receiver adapter in XI to 3rd party scenario

Hi All,
I have an requirement to connect sap xi and 3rd party. the scenario as given below:
sap ecc 6.0 --> sap xi --> 3rd party
Here ecc is sending an idoc to the 3rd party. The 3rd party is SAP certified and intelligent enough to receive and send idocs. Here I'm using a idoc adapter as a receiver adapter. In the receiver adapter I have to give a rfc destination and a port name.
My question is how to create a rfc destination for the 3rd party. and which port name we'll use in this case. Is the port name will be the 3rd party port name is yes then how I can create a port in the 3rd party system.
Please help.
Regards,
Santosh

A communication channel with a receiver IDoc adapter can be created automatically for business systems that are defined in the System Landscape Directory. refer this link
[http://help.sap.com/saphelp_nw04/helpdata/en/42/d1a4d665c5574fa6e19784358ec948/frameset.htm]
You need to configure the receiver IDoc adapter to convert Integration Server contents from IDoc-XML to native IDoc format and to forward the IDocs to an SAP system .
you create a port and the rfc destination pointing to receiver in PI system
use tcode sm59 for creating rfc destination and IDX1 to create port and map it to rfc destination.

3rd Party adapter on different JVM

Similar Messages

Maybe you are looking for