3rd party antivirus and antispyware not detected by Network Magic

I have Norton Internet Security and PC Tool Spyware doctor installed on my laptop. The operating system is Vista 7 home premium. 2 Network magic alerts indicate that my antivirus and antispyware programs are turned off. These alerts refer to the programs that come with the operating system. It does not detect my 3rd party software programs which are up and running with no problems reported. Is there a way fix these alerts.
Solved!
Go to Solution.

Henry4324 wrote:
I have Norton Internet Security and PC Tool Spyware doctor installed on my laptop. The operating system is Vista 7 home premium. 2 Network magic alerts indicate that my antivirus and antispyware programs are turned off. These alerts refer to the programs that come with the operating system. It does not detect my 3rd party software programs which are up and running with no problems reported. Is there a way fix these alerts.
Hi Henry4324,
I never heard of Vista 7 Home Premium.
Please publish a link to this operating system. Thanks. You may have a bootleg copy. In which Network Magic isn't going to work correctly.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Similar Messages

Trend Micro Anti-Spyware not detected by Network Magic

Network Magic reports that anti-spyware is not installed. Trend Micro Titanium is installed and running but not detected by Network Magic. Any help is appreciated.
    Network Magic Version installed: 5.5.9195.0
    The type of connection to the Internet is DSL
    The Brand of Modem is Motorola
    The Brand of Router is Linysys, Model is WRT310N V2 and hard-wired
    The Connection in use on the problem computer: Ethernet Port through M-Board
    Operating system is Windows Xp Home, Service Pack Level 3
    Software Firewall in use: Windows Firewall
     Trend Micro Titanium Anti-Virus Program / Spyware Program is actively protecting computer

Henry4324 wrote:
I have Norton Internet Security and PC Tool Spyware doctor installed on my laptop.  The operating system is Vista 7 home premium. 2 Network magic alerts indicate that my antivirus and antispyware programs are turned off. These alerts refer to the programs that come with the operating system. It does not detect my 3rd party software programs which are up and running with no problems reported. Is there a way fix these alerts.
Hi Henry4324,
I never heard of Vista 7 Home Premium.
Please publish a link to this operating system. Thanks. You may have a bootleg copy. In which Network Magic isn't going to work correctly.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Safari allows 3rd party cookies and all cookies even when prefernces are set to "never allow" with Mac os 10.6.8

safari ALWAYS allows 3rd party cookies and all cookies even when set to "block cookies: always" and "from 3rd party and advertisers." I have removed the website data, emptied the cache, reset safari, erased the history and it STILL dumps cookies. (For example, if I go to the usgov weather website only I end up with 11 cookies, the top one being "addthis.com" listed as cashed in local storage. But didn't I just empty the cache... multiple times??? Is my Safari application "broken" or "corrupt." Can the application be renewed so that it actually does what it is commanded to do?

Not using any extensions, Andy.
Allowed a guest account and tested that. Lots of cache/cookies showed up for my "guest" that on face value, appeared 3rd party: the familiar "addthis.com" cache and others including a facebook cache and I did not, nor have ever, participated in facebook. But it could be that the "trusted" site my virtual guest visited had a relationship with facebook such that my COMPUTER "friended" facebook even though my guest and I most certainly would have declined the invitation :-) But what I really don't get is why washington post cookies keep showing up every single time. Isn't that the absolute definition of 3rd party cookies?!
forgive my rant.
On the other hand, when I logged out as guest, all data was automatically deleted, and when I relogged in as guest, it appeared that all the data, including cached data, had indeed been deleted. But when I relogged in as myself, the same old garbage reappeared in the cache and cookie bin. The fact is, there appears to be no such thing as truly and completely emptying ones cache, resetting ones browser, or deleting ones cookies. They are here to stay.
(And, oh yes, I have tried logging out, turning off and on the computer right after performing emptying tasks, etc.)

3rd party plugins and Lion?

Does anyone know if there are still 3rd party plugins that are not working with Logic 9 and Lion?
Thanks,
Cobb

I don't think there is a comprehensive list anywhere of compatible plugins.
You can however begin looking here:
http://www.sweetwater.com/sweetcare/ts/detail.php?Index=33622
and
http://www.logic-users-group.com/forums/showthread.php?t=5203
Best to check the manufacturers' websites for your important plugins, if they don't feature on these lists.

BT Mulitast on 3rd Party Routers and IP Addressing

I know a few of us use 3rd party routers and have got BT Youview IPTV channels working fine.
But I have spotted a possible issue and not sure if this is my box or not.
When set the Youview box to static ip, every few seconds it is requesting an ip address from the DHCP range. This should not happen when using a static ip.
When the unit goes into standby it is still requesting the ip address which is odd as this again should not happen.
Even resetting the device to DHCP, I get the same issue of it constantly requesting an IP address.
I have performed the 'Software Reset' and both 'Factory Reset' options in maintenance mode and get the same issue once the unit is back up and running.
I'm more inclined to say this is a possible faulty unit as neither of the 'Internet/USB Recovery' options work and instead they both say 'Sorry, selected option failed'
Can some users just check their logs files for their routers and see if their BT Youview boxes are doing the same. For info my Retail Youview box does not have this issue.
regards
Walkerx

thanks Tim,
I think my box is faulty as I've now tried 3 different routers and get the same issue
The device is set to static ip, but is still requesting a DHCP address.
The BT HomeHubs have no decent logging so can't check anything on that and my Retail Youview box is not inheriting this same issue.
Just waiting to hear back from BT but don't think they will class it as faulty as it still works, but if the recovery options don't work and getting this issue with the ip address then you would think it was faulty

Hello everyone, I just updated my 3GS from iOS 5.0.0 to 5.0.1 Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network. I tried restarting the phone se

Hello everyone,
I just updated my 3GS from iOS 5.0.0 to 5.0.1
Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.

You do not need to keep posting the same thing over and over again.
Look to the right side of this page at "more Like this" or do a forum search.

I downloaded itunes 10.5 this morning and its not detecting my iphone

I downloaded itunes 10.5 this morning and its not detecting my iphone, ive never had this problem before, my laptop is detecting my iphone but itunes isnt, what should i do?

same thing happened to me, I have iphone 4 ios5 and on win 7. help!
Finally got it
exit itunes first then
start > search for "services" > apple mobile device (press stop then restart/start)
goodluck!

Windows did not detect any networking hardware, Windows 7, New Hard Drive

Message "Windows did not detect any networking hardware"
Satellite P505 S8980 Windows 7 Home Premium.
I replaced the Toshiba 500 GB HD with 500 GB Seagate.
Device Manager icon for any device with yellow exclamation mark,
Click on "Update Driver". Lan eNet details as follows:
Antheo - R8132 PCI-E Fast Ethernet Controller (NDIS 6.20)
Browse to the folder where the setup program has the driver...
Message: "The best driver software is already installed."
(But the yellow exclamation mark still harasses me.)
--- Go to "Setup new connection" ---
"Choose a connection option"
Click on "Connect to the Internet"
Response: "Windows did not detect networking hardware"
As near as I can tell, that translates from error 0x8E5E0247
I have this same error on other yellow exclamation marks respective of what kind of device it is.
=> To test my sanity, I put the old hard drive (same size) back in and except for the impact of slowness due to error retries, everything works okay.
Note:
Same issue (hardware not detected) for Video adapter and Audio.
I bought new USB Wireless adapter to test, and the driver installed but not activated because "not digitally signed", and that same issue fits all the above hardware. I down loaded them from Toshiba, and they are confirmed installed, but not accepted with digitally signed. I have uninstalled and reinstalled with same results.
Solved!
Go to Solution.

I'm discovering I am not as well as I thought... running on the AF hard drive which was built with a copy drive from old format drive which was the product of system recovery disc set.
Review for context: Advanced Function HDD
Scenario that exposes harm caused by cloning data from 4K blocks drive to 512 bytes blocked drive (AF)
Toshiba supplied Windows-7 System Restore Discs: to factory state
Then I built the Windows-7 Repair Disc... used later.
Hard drive was replaced when it caused SMART warning at every system boot.
Acronis was only utility that quickly detected problem (3 sectors had permanent read errors.) Active@Disk Image and Power Quest Drive Image (Ghost) did not detect the issue.
I tried Seagate 500 GB and Western digital 500 GB HDD drives as copy target.
That new drive would not boot: "Required source not found"
Booted My newly created Windows-7 repair disc, and used to to fix startup.
See images.
That worked and then the ST9500423AS disc booted.
Now... next day I discovered Window Update is not working.
I get message:
Windows Update cannot currently check for updates, because the service is not running. You need to restart your computer.
I ran Microsoft Fixit for updates. It says it fixed two items.
I still have the problem.
The service shows "started"
Control Panel/ ACTION Center/ Maintenance/ Check for Updates
"No action needed"
"Windows Update does not require any action"
I checked Update History...
... It is empty, else window is vacant... blank.
Soooo..... for a sanity check, I swap out hard drive; go back to the old format (which is the one I copied).
It works! 7 updates to install, including SP1... but I did NOT install them.
Switch back to the AF drive... Update doesn't work. I am broke again.
Is this another strange problem caused by the Advance Format issue?
What to do?
By the way... I did install an Intel storage Matrix driver update, but I do not have RAID chip, so that driver is not for me... unless I missed out on something.
Carl

Airport does not detect wireless network; it says problem = [network]"connection timeout"

It is not a problem of signal strength, and my Airport detects other networks. It used to detect the network I want to connect to, for two years. It suddenly stopped detecting the network (which is WPA Personal password-protected). When I select choose other network and type in the password, it won't connect to it claiming "connection timeout."
This happened before. Then after several days, Airport was able to detect and connect to the network I want. Now it again won't detect the network, and this seems permanent short of taking measures to address the problem. Should I try connecting manually to the network, and hodo I got about that? Thank you to anyone out there ho might be able to help.

i have a macmini (OS 10.5) and use a belkin wireless router. When I turn on Mac address filtering on the router I have an Intermittent problem. The airport does not recognize the wireless network. On the network preferences panel there is a message that the airport is using a self assigned IP address. sometimes the message says the airport has no IP address. If I turn off the Mac address filtering and use a WAP password only the network is recognised and connects without a problem. How do I resolve this? I dont have the problem with a iBook using system 10.4. Is turning off the Mac address filtering secur?

Wich drivers to install after ´Windows did not detect any networking hardware´

Hi there, I just reinstalled my laptop. But something went wrong. My laptop says now:Windows did not detect any networking hardware´ I found already out that I need to install drivers. But there is so much choice. Wich one do I need to install.http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5405166&swLangOid=8&swEnvOid=4059 Hope you can help me!Freek

Hi @sweetandsouther ,
Welcome to the HP Forums!
It is a terrific place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
How Do I Find My Model Number or Product Number?
I understand that Windows it not detecting any network hardware.
If you check Device Manager is it recognized?
If the card is listed is there an error on it?
If not and you are out of warranty you could try reseating the network card.
Here is a link HP Notebook PCs - Testing for Hardware Failures (Windows 7, Vista) to that may also help.
Here is a link to HP PCs - Troubleshooting your wireless network and Internet connection (Windows 7) that may also help.
Have you ran the HP Support Assistant ?
Have you tried using MS Fix It?
You may choose to contact HP support for assistance with this difficulty.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Iphone 6 not detecting wifi networks

my iPhone 6 is not detecting wifi network, i already switched off and on.
thanks

cheeku2000 wrote:
my iPhone 6 is not detecting wifi network, i already switched off and on.
thanks
Switched what off and on, Wi-Fi in Settings, the iPhone, the router? See this support document about troubleshooting Wi-Fi connections. If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support

Pb is not detecting adhoc network

Hey..!!
i'm trying to connect my PB to internet via an adhoc network through my laptop.....!
bt my PB is not detecting the network....actually i want to share my laptop's internet conn.
with PB so that i can access app world ..!!
so plz guys......hlp me out...!!!

Hello vicky11392 and welcome to the BlackBerry® Support Community Forums.
This type of connection is not supported on the BlackBerry® PlayBook™ tablet.
You will need to use Wi-Fi® to connect your PlayBook to use internet based applications.
Hope this answers your question.
Cheers.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Windows did not detect any networking hardware iMac 27' 2013 model

Installed windows 7 using bootcamp now when I go to connect to a network it says windows did not detect any networking hardware

Did you install the windows drivers as well?

IPhone 4S wifi is gray and will not find any networks or move. I have hard reset network reset and safari reset. All other devices in my house connect to wifi. Any suggestions other than the 3 that do not work.

iPhone 4S wifi is gray and will not find any networks or move. I have hard reset network reset and safari reset. All other devices in my house connect to wifi. Any suggestions other than the 3 that do not work.

iPhone 4S wifi is gray and will not find any networks or move. I have hard reset network reset and safari reset. All other devices in my house connect to wifi. Any suggestions other than the 3 that do not work.

After I updated OTA stopped taking charge and does not find the network.

Почему после обновления ОТА перестал брать зарядку и не находит сеть?????????????? z10 stl100-2
After I updated OTA stopped taking charge and does not find the network.
И такая же проблема на всех 10.3.1. прошивках, а на 10.3.0. такого нет и даже не знаю с чем это связано, Живу в Белоруссии,
And the same problem on all 10.3.1. firmware, and 10.3.0. such is not and do not even know what it is connected, I live in Belarus, help pls

Привет!
В общем вышла новая прощивка ОС 10.3.1.2558 для Blackberry z30 - она оффициальная только для з30, но я себе поставил на з10 и все норм. На форумах Крэкберри, ребята с такой же проблемой (нет сигнала, аккум не заряжается, камера не работает) исправили все эти ошибки установив данную прошивку.
Я вчера тоже поставил ее себе на телефон и все работает, вообще нет никаких проблем. Я устанавливал автолоадер.
В общем мне эта прошивка решила все проблемы и полноценно теперь пользуюсь 10.3.1
Удачи!

3rd party antivirus and antispyware not detected by Network Magic

Similar Messages

Maybe you are looking for