3rd party application audio routing

I have not upgraded to Leopoard yet but I am very curious as to whether anyone has had experience with routing audio from both Mac apps (iTunes, QuickTime Player, etc.) and 3rd party audio apps (i.e. Pro Tools, Digital Performer, Reason, etc.) in an iChat session.
Under Tiger, I use a special concoction of Soundflower from Cycling74 (virtual audio mixer) and Audio Hijack Pro from Rougue Amoeba to route other application audio as input in iChat. It works but it's not pretty in terms of setting everything up. I can monitor everything in my USB headset save for my own voice input but everything can be recorded in case I want to produce a podcast or save for other purposes.
If iChat in Leopard can essentially route any audio output on your Mac into iChat, this will be great for the kinds of collaborative audio projects I like to do.
Thanks for any input you can provide.
rgr

Joe Chiarelli wrote:
Any suggestions for integrating iweb with static html pages created by 3rd party apps?
Joe ~ Since iWeb can't import HTML pages, one suggestion is to publish your current sites to the same iDisk space iWeb uses by following the instructions in this Apple doc:
MobileMe: How to publish a custom website
...This would put your sites in Web > Sites folder and the URL would be:
http://web.me.com/membername/foldername/
Then you could remove your sites occupying the "HomePage" area, i.e. the Sites folder on iDisk.

Similar Messages

Opening and closing 3rd party applications ??

Does opening and closing 3rd party applications with the click of the home button actually close the application, or, does it continue running in the back ground ?
I noticed most of the 3rd party application don't have a close/exit option, and wonder if opening and closing several applications with the home button can cause the many crashes I have read from fellow iPhone owners ?

Clicking the Home button may close the application depending on the application itself. Some applications that use the network may close when going to the Home screen. To force quit any application, hold the Home button down for about 6 seconds until the Home screen comes up.

RFC( SAP R/3) to XI to 3rd party Application

Hi All,
we have an 3rd party application to which we want to send some data from R/3. We are using XI as the middleware.The process has to be triggered from R/3 side. We are not using Idoc's here. We are planing to use the RFC through which the data transfer has to be done.
We are creating a BAPI with import, export and tables parameters.Basically the RFC is in SAP R/3 System.We need to send the data in the table to XI.
In this case how the RFC destination has to be created and how the RFC to be called in the R/3 system to export the Data to XI system.
Answers are highly appreciated.
Thanx and Regards,
Durga.

Hi,
<i>>>>In this case how the RFC destination has to be created</i>
Check this blog by Michal it shows you step by step
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
<i>>>>how the RFC to be called in the R/3 system to export the Data to XI system.</i>
Hope you are aware of normal way of calling function
CALL Function "FM Name"
Export
Tables
in this case the RFC should be called as follows
CALL Function "FM Name" destination <SM59 Destination>
Export
Tables
The above is for Sync call and if you want to make a Async call that is you are not expecting any reponse from the target then
CALL Function "FM Name" IN BACKGROUND TASK destination <SM59 Destination>
Export
Tables
Thanks,
Prakash

Adobe Reader 9.x does not retain preferences when called by a 3rd party application.

I have an in-house application that utilizes .pdf and .xfdf files. We use Adobe 9.x when viewing these files and when I open them natively from Windows explorer they Display In Browser and all my Trust Manager preferences are intact. If I use the 3rd party application to open the files they Display In Browser but none of my TrustManager settings are present and I am forced to trust the document each time I reopen Adobe. If I leave Adobe Reader open for the duration of the session that I am using my 3rd party application though the Trust Settings for the document I loaded are present but as soon as I close Adobe they are gone until I Trust the document when opening it again. Any insight as to why this might be and how I could rectify the issue would be appreciated.

We are using 9.1.1.
We notice that this option is no loger available in this version. The below option will keep the form data available even if you exist out from the sessions.
Keep Forms Data Temporarily Available On Disk
Retains forms data in the Internet browser if you briefly go to
another web page and then click Back to return to the PDF form.

Any links i open from 3rd party applications do not open in firefox.

To be more precise, when i click a link, Firefox does open however it does not visit the URL. It simply opens a new session. I have started Firefox in safe mode and the problem occurs, i have reset firefox to default preferences and the problem still persists. I can see no problems in the setting of Firefox itself and have already tried all the fixes available.
I am using Firefox 29.0.1 on Fedora 20 64x

As i stated, when i click links from 3rd party applications, such as skype; a youtube link or something similar. Firefox opens a new session however it does not visit the clicked url

XML Gateway for Oracle Applications to 3rd Party Application System

Hi,
I am having one unique requirement for sending/receving an xml file from Oracle Applications to 3rd Party Application system (which supports XML). Has anyone worked on the XML Gateway for sending/receiving the PO/ASN or Pick Release/Ship Confirm XML information from Oracle Applications (11.5.9 or above) to 3rd Party Application System.
Looking forward your valuable inputs/suggestions on this.
Note: Please note that, Trading Partner setup has to be done for a 3rd Party Application System.
Thanks in advance,
Regards,
Muru

Hi
Were you able to acheive this , Please share the steps you followed by dropping a mail to [email protected]
Thanks
Prasad C P

What is Oracle's recommendation of enabling a 3rd Party application for Online Patching? Is this a requirement with EBS R12.2 or is this something that can be done in phases for e.g.:

Hello -
My Oracle Partner account uses Oracle EBS, Fusion Apps and is in the process of migrating from 10g to 11g; forwarding their question here -
What is Oracle’s recommendation of enabling a 3rd
Party application for Online Patching? Is this a requirement with EBS R12.2 or
is this something that can be done in phases for e.g.
Phase 1: Oracle EBS utilizes Online patching while
the 3rd Party application does not leverage edition based
redefinition for Online patching
Phase 2: 3rd Party application is modified
to leverage edition based redefinition Online patching mechanism.
I would appreciate any insight/recommendations you may have
regarding Online patching for EBS 12.2.

This seems to be related to EBS an may be better answered in the EBS forums as this forum is dedicated to Fusion.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

3rd party application for album artwork?

Are there any GREAT 3rd party applications for automatically bringing in album art to iTunes? I've got a bunch of old music that the automatic function within iTunes is not getting anything for. I even tried to clean up some of the info (i.e. make sure it had artist, song name, etc in proper fields), but nothing.
If that or another app would correct song data also (probably asking a bit much) that would be awesome. I see where some of my very old stuff from back in the MP3 days will have Artist Name-Song Name as the title.
Any help is appreciated. I dont have a week to do this manually!

MP3Freaker would be your best bet. I've used others but MP3Freaker works flawlessly, and allows you to do three songs for free to show how it works, and how well. It's $23 but it saved me hours of painstaking work going through my 5500 songs
As for album art: http://www.versiontracker.com/macosx/ipod-itunes/artwork

3rd party application sync failures -- BES policy?

I have a BB curve (8310, ATT v4.2.2.170) which is synch'd via BES to corporat email/etall. I have the BB desktop manager installed on a PC. The BBDM can: install & remove applications, add/remove multimedia (songs, photos), access the storage card. When tryign to use the BBDM to synchronize 3rd party application data (aka, a password keeper like SplashID or Ascendo Data vault), the syncronization fails. I did install BBDM to use the internet service, not redirector.
My question: are their policies which my IT group might have set that prevent the synch of 3rd party data. We tried changing the "allow 3rd party to use USB" to true, that did not help. If the security policy forces data encryption on the device, could that prevent the sync from happening? The desktop all looks correct (right BB id, etall), and the app on the BB think's its been synchd, but the data never moves between the two and I get error messages akin to "Synchronization Failed; Please try again. Technical details: tableSystem=NULL" (this from SplashId).
Thanks

Check this link: http://www.blackberryfaq.com/index.php/Remove_IT_Policy

3rd party application and address book

Hi Guys
This happens on a regular basis
I use a 3rd party application called photo mechanic which is a n image browser from www.camerabits.com
It has a feature where you can email the images using the mail application of your choice(my choice is mail) using the addresses in your address book.
While sending multiple images often the whole process comes to a grinding halt as the address book is stripped of all it's contents, I back up the address book every time I add an address so it does not cause me to loose the information.
Just wandering if anyone might have an idea what is causing this, the reason I ask in this forum is that the 3rd party developer says it must be an issue with mail as he knows of no other issues.
I should add that I have no technical information as the error means a restart so nothing is recorded (that I am aware of)
The images are added as attachments of usually 300k to 500k in size one per email
Any help or ideas

Joe Chiarelli wrote:
Any suggestions for integrating iweb with static html pages created by 3rd party apps?
Joe ~ Since iWeb can't import HTML pages, one suggestion is to publish your current sites to the same iDisk space iWeb uses by following the instructions in this Apple doc:
MobileMe: How to publish a custom website
...This would put your sites in Web > Sites folder and the URL would be:
http://web.me.com/membername/foldername/
Then you could remove your sites occupying the "HomePage" area, i.e. the Sites folder on iDisk.

Export PR data from R/3 to 3rd Party Application

Hi Team,
Please help me providing possible option to transfer SAP data to a 3rd Party Application.
Waiting for Your Reply.
Rosalin
Moderator message: please do more research before asking.
Edited by: Thomas Zloch on May 18, 2011 2:38 PM

Hi Rosalin,
There are various ways to do so
1. Off line solution: You can write an ABAP report and download flat file or excel and that can becom the input for your
      application.
2. On Line solution : Develop an Remote Enabled FM(this FM will provde the required details) and develop a web service
     (using .net or java ) Call this web service through your application.
Idoc and XI's are some of the other alternatives you have.
Hope this helps.
Bikas

How do I manage open files in Server 2012 without resorting to 3rd party application?

How do I manage open files in Server 2012 without resorting to 3rd party application?
I cannot find the Mange open files in FSRM.
Thanks

Wouldn't it make sense to place it in the server manager / shares section?
I mean, second to creating or finding a share, isn't this what most users would be after?
For like 20 years we've been trained to right click to find stuff Microsoft is hiding, and right click don't do nothin' here. You gotta go hunting under tools. Or, forget the new half-baked interface with half of what you need and go old school,
direct to Start - Computer..Right Click.. whoops... that doesn't exist anymore.....
Drool.........drool.............Find that hiding, blinking start button in a RDP session, click start after three trys, and TYPE IN "Computer Management" . Right Click, Pin it to your desktop, pin it to the start screen, pin it to the taskbar, send
it to OneNote, and upload it to skydrive so you can find it again, then get back to what you were doing....to find the cottin' pickin open files and kick your users off so you can have your way with the server.

3rd party application development

I know that apple recently extended offers to develope 3rd party applications for the itouch, but how soon will we begin to see these. I am referring to more of the game section for going offline, then any other apps.

AndyT4097 wrote:
Great another $20 upgrade
remember that u were paying for 5 apps....
the 2.0 update in june has only 1 new app, 'the app store'

3rd party application internet connection issues

I downloaded several apps from App World and all the ones requiring an internet connection fail to connect? I have a 8330 with OS 4.5.0.77 on Verizon. I can receive email and use the internet browser just fine. Any idea how to enable the 3rd party applications to use the internet? I have set the permissions for all the apps to "Allow".

What are some of the apps that aren't connecting?
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Enabling iPod Touch to be a storage device - optimal 3rd party application

The ONLY disappointment I have had with my beloved iPod Touch 32 is that it is the ONLY iPod not recognised by Windows or Mac OS as a storage device!!
In fact I only chose the 32GB version for that expected benefit - my dealer was shocked when I discovered this stupid limitation and offered to give me my money back!
I understand there are a couple of 3rd party applications that enable the Touch to be recognised as a storage device (to do daily file backups).
Has anyone had any experience with any of these apps? Which is optimal (simple, reliable and unlikely to cause software conflicts that mess up the reliability of the Touch?)
I am running firmware version 3.0 (happily).
Thanks for your time,
Simon.

It is ridiculous that the iPod Touch cannot mount as a device enabling use of free space for data storage. 3rd party apps are now addressing this limitation.

3rd party application audio routing

Similar Messages

Maybe you are looking for