3rd party ASIO drivers for Creative external (USB) soundca
If you're using your USB soundcard for music making (recording) and you're suffering on
latency problems, you might want to check this out.
USB Audio (http://www.usb-audio.com/) is offering low latency USB ASIO driver, which is
statet to be compatible with Creative's external (USB) soundcard models:
- Audigy 2 NX (48 kHz only / not on Mac OS X yet),
- Extigy (48kHz only),
- MP3+ (48kHz only),
- SoundBlaster Li've 24bit external
<i>Limitations using Creative Extigy with this driver: 48 kHz, stereo output, line or
mic input (digital input only while output is muted), no MIDI, no remote control
functionality. We worked hard to change this, still it seems to be impossible at the
moment. </i>
USB ASIO is commercial product, but there is a demo version available, so you can test
if it would make your life feel easier (http://usb-audio.com/download.html).
.jtp
OK, I can now CONFIRM that this problem IS with the latest (but rather old) Kensington V3.0 driver. From Kensington Tech Support:
Subject:
(Info) Expert Mouse & Leopard - scroll ring no longer zooms Mac screen in and out
Discussion Thread
Response (Asif Ali) 11/03/2007 01:05 PM
Thank you for contacting Kensington Technical Support.
I sincerely apologize for the inconvenience caused to you.
I understand your concern. I regret to inform you that Mouseworks 3.0 on 10.5 breaks the native Ctrl + Scroll to Zoom functionality, but for now the solution is to Uninstall Mouseworks if this functionality is preferred. As we test the Expert Mouse & MouseWorks on the release version of Leopard and found that all functionality/programmability works with MouseWorks installed except for scroll wheel zoom.
However as we have forwarded the issue to our software development team, we are expecting an updated release very soon.
I appreciate your understanding and patience.
Regards,
Asif Ali
Kensington Technical Support
Similar Messages
-
does latest version of bootcamp installed on late 2013 rMBP put thunderbolt drivers for lacie external thunderbolt/USB 3.0 drive?
I am wiping my current windows bootcamp partition and reinstalling windows using disk utility /bootcamp wizard to clean up and reinstall.
just curious if the Thunderbolt drivers get installed from bootcamp/windows sofytware update as I can't remember iif i had to do it manually before. I do see it shows up on windows side in device manager and if it is pluggged in during boot screen (to windows 7 pro 64 bit) shows ASMedia drivers being loaded for it.
Thanksthank you so much I was pretty sure it did but wanted to be 100% sure as purpose of clean install was to clean up some mishaps I did with office 2007 (custom install), etc.
Many Thanks -
What is the best 3rd party optical drive for my mac?
What is the best 3rd party optical drive for my mac?
I really like this drive, it reads/writes DVD's and CD's just fine on my mac and on my PC aswell also it has only 1 USB so it will only take up one of your 4 USB's
Amazon UK link
Amazon US link -
I have a MacBook Pro laptop purchased in June 2011, and the superdrive no longer works. Rather than have it replaced, I'll buy a 3rd party superdrive that plugs into the USB port. Does the external superdrive need it's own power source, or will the USB port provide enough power?
The Apple external SuperDrive actually exceeds the allowed power draw. Because of this, it is only trouble-free on certain models that accommodate this excess.
All others require an external Power source. -
Where would I find the drivers for an external device after I install it?
Okay, so I need help. I installed a driver for osx 10.5 thinking that installing the software 10.7 would support it. If it did, then it created a bigger problem, which is I cannot create a USB Ethernet connection in the networks pane. Mind helping out and telling me what I should do?
you would generally find the drivers for an external device on the manfacturers website. However, with printers for example, I have recieved updates directly through Software Update.
-
3rd Party Plug-ins for Illustrator
EskoArtwork has a Dynamic Barcode 3rd party plug-in for Illustrator that is listed on the Adobe wesbiste for Illustrator CS6. I puchased it and downloaded it but during the install I get a message saying it can't find a compatible Adobe Illustrator installation on my computer (I have CS6 installed). Upon reading the information on EskoArtwork's package, it says it is only compatible with CS4, CS5 and CS5.5. Is there a way to get this to work with CS6? If not, I would suggest Adobe take it off their list of Plug-In's for CS6.
Also - if it is not compatible, does anyone know of a similar plug-in that would generate and insert bar codes into packaging designs?
Thanks!You'll probably need to ask EskoArtwork about this.
In past versions, I've been able to move plugins from the plugin directory for the old version to the new version, and often it worked. (YMMV, it depends on changes in the SDK.) You might try creating empty directories for a CS5 version number to see if the installer will work. -
The finder window for an external USB hard disk suddenly started separating files by time (today, yesterday, etc.) and stopped allowing me to change column width, order, etc. Also the header bar shifted to flat white from gray.
All was normal until the icon for the disk stopped showing up on the desktop when I would plug it in. I rebooted the computer, and the disk icon now shows up but this new look to the finder window started as a result. The hard disk does not have this problem when I use it on another Mac running Snow leopard. Also, two other external hard disks that I use on this computer running lion 7.4 still have the normal header bars with columns that can be reordered, etc.
I have tried looking in preferences and other places but have not seen this discussed.Well duh - I finally figured out that somehow in the View options for the hard drive, the "arrange by" option had been changed to "by date" from "none". Not sure how that happened, I had never used the "view options" menu tem before. Changing "arrange by" back to "none" gets the gray column headers and the collapsible folder icons back.
-
Developing 3rd party UWL Connectors for People soft system or other Java sy
Hi Everyone
We have one requirement that is u201CDeveloping 3rd party UWL Connectors for People soft system or other Java systemu201D and get the workflows from those system and display in portal though UWL.
We used u201CUWL Custom Connector APIu201D and written all the required methods.
Could any one help us u201CWhere can we specify the 3rd party system details?u201D
If possible please send some sample coding for it.
Thanks in advance
SatHi Satya!
Like the default SAP backend UWL connectory your 3rd-party connector should make use of a PCD System Object. This system is a mere java component with nothing more than a portalapp.xml defining all the system properties.
Create a system in the portal system landscape based on the System PAR you depoyed.
For every UWL connector you create in portal you define a system alias. This alias has to match the one of your new system object.
And now for the sad part: I didn't find any clue yet about how to access the system from a custom UWL connector. The system alias is available in the method getItems(), but no hint whatsoever how to get the system object to the alias.
I'm still investigating this, since i'm exactly at this point.
Regards,
Juergen -
USB Recording - requirements for the external USB drive
What are the requirements for the external USB drive to be recognised by the TV?
I've tried two now, which can both be seen by the TV to show media, but neither are recognised by the TV to be used as USB Recording space.Hi,
I have a similar question.
I have a 40L6353 and I cannot seem to playback anything recorded onto USB.
I have tried a large 500 Gb Toshiba (USB powered) drive and 2 or 3 others such as an 8 Gb SanDisk and a smaller capacity non branded 500 Mb stick.
All of the above I have formatted in the TV. When I press record the pop-up staes that recording has started and when I press stop it asks me to confirm. When I go to the recorded list it shows the files but says that they are an unsupported file format!!
I can play videos and music transferred to another Toshiba 500 Gb drive by PC.
I have also tested the sticks and they pass the 2 on-screen tests and I believe when a stick is inserted I can pause live TV.
Does anyone have any ideas?
I have been trying to get this to work for over a week - if there is a fault I will need to go back to the vendor but I want to be sure it isn't operator error.
Thanks in advance.
Message was edited by: banzai -
3rd Party Email Application for CF
I know there are 3rd party email applications for CF ... Can
anyone point me to them and/or let me know if they have worked
better. I'm looking for more power with email (tracking, sending,
routing, etc).
Thanks,
JoeYeah, that might be to much. Normally, CF will directly send
to your mailserver (usually IIS mail services) and if something
goes wrong your only options reside in looking at the CF logs if
you're logging mail. But I know there are some third party apps
that do more tracking/resending then send to your mail server (and
or better bulk mail processing). In your case you've just handled
it more complexly by using an Exchange Server. That will be
overkill for me plus a good amount of time learning and installing
(not to mention price tag).
Joe -
Windows 7 no longer recognizes or allows ASIO drivers for my usb audio interfaces
Hello All, last year I purchased a new version of Propellerheads Reason and the Balance digital audio interface that came with the bundle.
Everything was fine it all worked well, especially when I added asio4all drivers. (The Balance comes with its own asio driver).
Super low latency on my keyboard and midi guitar. I was using my midi guitar and set up at jams for several months last year and it was great!
One day I was getting ready for the jam session and I noticed that the latency on my midi guitar became so bad that I could not play in time with the other musicians.
I checked out the preference/audio page in Reason and saw that my asio drivers were missing! I immediately went and down loaded asio4all again and installed it. It would show up in any of my music software. I have tried removing and re-installing
the stock ASIO driver that came with Balance and no luck.
I suspect that shortly before this huge problem ( my music software is basically useless without asio drivers) I allowed a windows update to my system.
I think that somehow during one of these "updates" something changed and windows 7 no longer allows asio drivers on my computer. This really sucks!
Is there some way to get rid of the offending "update" that ruined my music system?
Thanks in advance!
DonThank you for your response FangZhou Chen, unfortunately this problem started last fast, possible early November so I can't do a restore that far back.
my best,
Don -
Is 3rd party software required for auto creation of DIR for scanned copy,
Hello SAP gurus.
The current business process is there are 100s of service order, (IW31 creation TC) and each service order has its own 50-60 external documents attached to it.
unfortunately there is no standard link from SAP DMS at Service order (lW31, TC) level.
Here i tought of creating a document folder in EDMS or structure with the reference of service order No. And keeping this service order as reference we need some 50-60 documents (files) to be directly assigned to the main service order No, with out any manual intervention.
Here is what the user does in the present system
With our client in the present system they use a 3rd party software for mail and scanner interface, here Any x, y, z user scans an document or Mails a document with attachments, just giving the subject line as the Service order already created.
The document attachment directly comes and sits inside the predefined Service Order folder. Along with the user name who sent the document and the time he sent the document.
Is the same thing possible in SAP ie.. Creating or attaching documents with out any manual interventions taking the reference of Mails sent having the subject line as the DIR
Does this require 3rd party interference to do this, will any BAPI /BADI to do this for DMS with out 3rd party software.
is there any upload programme that should be used which will avoid 3rd party software.
please explain. points waiting.
Thanks and warm regards
Priya S
Edited by: Priya S on Mar 16, 2009 4:32 PMHi Priya
Creation of New Object link is not so hard job.If any expert ABAP Consulatnt is available he can do in a week.But It all depend on his understanding of functionality clearly and quicky.
For developement of new object link check this link.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b2/c043a66fab11d1949500a0c92f024a/content.htm
They work fine if you develope it as per procedure in above link.You just need good ABAP'er.
If you are trying upload Proggramme to upload the files daily basis from folder you can do this .
Just create folder on desktop put some docuemnts and run BDC to upload the document to DIR.I had tried once. Get help of Good ABAP'er to do your job.
If any help please get back.
With regards
Mangesh Pande -
RE: I need drivers for an external isight camera on windows 7 64-bit
IRT http://discussions.info.apple.com/message.jspa?messageID=11515278#11515278
Are the drivers from boot camp only for the internal isight camera or should the drivers work with the external firewire camera?
I installed the drivers without a problem on Windows 7 64-bit. However, windows 7 didn't recognize the drivers (either automatically or when manually found). The installer placed them in C:\Windows\System32\DriverStore\FileRepository\
Of note, the camera does work. Using skype, the camera's LED lit up. However, the generic driver wouldn't allow the camera to "talk" with windows. The aperture opened to the max setting and "whited out" the video. Thanks!!witkewoo wrote:
IRT http://discussions.info.apple.com/message.jspa?messageID=11515278#11515278
Are the drivers from boot camp only for the internal isight camera or should the drivers work with the external firewire camera?
I installed the drivers without a problem on Windows 7 64-bit. However, windows 7 didn't recognize the drivers (either automatically or when manually found). The installer placed them in C:\Windows\System32\DriverStore\FileRepository\
Of note, the camera does work. Using skype, the camera's LED lit up. However, the generic driver wouldn't allow the camera to "talk" with windows. The aperture opened to the max setting and "whited out" the video. Thanks!!
(1) External iSight is, as you recognize, a Firewire webcam. It has its own built-in microphone.
Built-in iSight is a USB camera. It has no mic of its own.
Windows® video drivers for both iSights are included. However, as explained in the following link, there are no Windows® audio drivers for external (Firewire) iSight’s internal microphones:
http://en.wikipedia.org/wiki/ISight#iSightonWindows
(2) If you can track your problems to your Boot Camp or Windows installation, see FAQs and troubleshooting here:
http://www.apple.com/support/bootcamp/
As reported by user mikkel_nielsen here:
http://discussions.apple.com/message.jspa?messageID=11953256#11953256
you may merely need to update and reinstall the drivers.
I do not use Windows®, but if you get no better help here, the best I have to offer is:
Check iSight with OS X apps and user accounts: http://support.apple.com/kb/HT2090
If all works there, consider Boot Camp/Win7 FAQ & links: http://support.apple.com/kb/HT3986
Also Boot Camp 3.0, Mac OS X 10.6 FAQ & links: http://support.apple.com/kb/HT3777
If all else fails, this search in Boot Camp might give you some ideas or an idea for a new topic there:
http://tinyurl.com/39lu9fn
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight -
i am looking for a 3rd party sat nav that is compatible with my e51, i understand that i need an external receiver but am not sure which one would be the best for my phone?
ideally the mapping of the sat nav would be topographical as well as street mapping to maximise its use.
any ideas outhere would be appreciated.Hi mal5336
An indication of your worldwide location may help in choice of application here as some providers maps are better for particular regions. Nokia do produce two external Bluetooth GPS receivers LD-3W and LD-4W but cheaper alternatives are available, but it would be an idea to try before you buy as software updates to Nokia devices have been known in the past to introduce compatibility issues unfortunately.
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
URGENT: Any drivers for Creative Zen
Hey, somebody.
I've written to the support but it takes so long time so I hope someone here will answer sooner.
I bought a new Zen V and installed all the **bleep** on the CD, after that the manual says that I sholud connect my mp3 and load it, then start to use it. My problem here is that my computer doesn't find the mp3player. The usb device can't find any drivers at all in windows, i've also tried the CD to find any drivers. Not a **bleep** there either.
Please help me, where can I find driver to make the computer find the player. I really need to use my mp3, I have tinnitus and music is my only cure.
Thankful for ANYthing!
/JosefinejoSSan: Please refrain from using profanities on this forum, as this is a public forum we try to keep clean.
As to your problem, the drivers for the Zen V are actually built into Windows XP Service Pack & 2, so they are not on the CD. If Windows is telling you it can't find the driver, the first thing you need to check is your Service Pack.
http://us.creative.com/support/kb/article.asp?l=3&sid=4275
Try going through the KnowledgeBase article above, especially the "For Windows XP Users" section, as it applies to your case. One other thing you may want to try is a different USB port, preferably one on the BACK of the computer. Those ports tend to have less issues with mp3 players.
Good luck, and let us know how it goes!
Dale
Maybe you are looking for
-
I have purchased new lap top and downloaded windows.8..1 but i am unable to download itunes, it keeps coming up as unsucessful. I am a bit thick when it comes to technology so any step by step insturctions would be good. Please help thanks
-
I have had my iPhone 4 for about 1 1/2 years, with no problems. A couple days ago the battery drained in about an hour, I plugged it in to charge and it was not charging. After a few hours a message popped up on the screen about the temperature being
-
Download to excel - long text in single row using gui_download
Hi Experts, I want to download the long text (read_text) (500-600 characters) to excel in single row. the column width should be 60. i am using the gui_download FM as in my report i m using one gui_download for header data and 2nd one for details usi
-
A3 Can't import GPX Data from MacGPS Pro
I'm on a trip trying out A3 for the first time. I have a Garmin 76CSx and normally import my track logs into MacGPS Pro 8.6.0 I same the track logs as GPX files and then import them into A3. Early in the trip, I could see the track in the Map in A3,
-
Hi All, We have a data source called 0BBP_TD_CONTR_2. It collects data from SRM related to contracts. We have activated it by using rsa5 transaction and extract data from SRM to BW. It works fine. However, when we tried to extract data again we cam