3rd Party AU's VST's in GB'08?

I have been collaborating with a Garageband user and I am on Logic 7.1.1
Now I have Garageband '08 which opens his session/files fine, but in GB can i change the sounds of some of the MIDI loops?
I have East West Colossus which I'd rather use my sounds from than the Garageband ones..Its just i dont know my way around GB..
I did open the GB session and I did ses that my ReFX Vanguard was in a list on the right of the screen?
Does this mean that it can use 3rd party AU's and VST's?
Thanks :crazy:

GB can send Midi out to an external synth or similar if you use MidiO.
I've used my microKORG to send MIDI into the GB, then turned it around and used MidiO to send it back out to the microKORG with no problems.
You can find it here:
http://mysite.verizon.net/retroware/
as well as on VersionTracker.

Similar Messages

  • Trouble with 3rd party VST installs for Garageband, can't find instruments

    Hi,
    I am having trouble with Audio Units for Garageband when installing 3rd party software, VSTs, loops, instruments. I have more issues with Logic Pro. I am hoping that it is the same underlying issue and that I am just missing something. I have the manuals (not great for troubleshooting). I am confused with some installs use User Library and others use the Computer Library. I do go to the mfgs sites for updates. The installs sometimes work as standalones but I don't see ALL of the components of the software in say Garageband or Logic. Mostly, I am missing the "instruments" and "loops" that I want to access within the DAW. Some examples:
    • Here is some of the software I am talking about:  East West sample libraries (Play and Native Instruments); Vienna Symphonic librarires; Sylenth1 (just last night); Sample Tank 2 and Total Workstation 2 from IK Multimedia and others.
    • In GB I see the Audio Units for Vienna, Play, Sylenth, some of the IK Multimedia but NOT any instruments when I go to the "Sound Generator" -- I seem to be missing the instruments and loops. I see less AUs in Logic Pro. Some of these are VST instruments.
    • Can I just drag-drop samples to the library folders to fix this?
    • The plug-ins do not seem to work (though Sylenth1 worked for a single sound). When there is a standalone app (as in Sample Tank), I finally got the "sounds" to be reinstalled and loaded, those sounds/samples don't show up in any DAW.
    • When and if the sounds/loops/samples show up in GB's "Instruments" section will I be able to tell that they belong to that particular software or library?
    Thanks in advance.
    John

    Found the answer myself, it was simple:
    • Select the Track
    • Show the Instrument (info area)
    • Click on Edit
    • Click on the "Sound Generator" pop up field.
    • At the bottom of the pop-up list, select from the Audio Units that you have installed. This is where you see "Sample Tank 2, Vienna Instruments..."
    • NEXT -- IMPORTANT:   CLICK ON THE PICTURE next to the Sound Generator pop-up field.The AU unit loads up, the interface pops up, you load up the instruments in this AU Unit. You do NOT see the sounds from the AU unit in the normal Apple instrument list.
    This was not intuitive but once you know it, fairly simple.
    Still, the devil is in the details -- more questions on the way.

  • Need help using Waves 64bit, 3rd party plug-ins with Premiere CS5

    I'm trying to install and use a bundle of 64bit 3rd party audio plug-ins from Waves in Premiere.
    I am on a Mac running OS 10.9.3.
    I can't figure out how to get Premiere CS5 to recognize my 3rd party Waves 9.3 bundle.
    The plug-ins are listed and fly by one by one on the loading splash screen while  Premiere launches. I can't find them anywhere in Premiere once it launches. Aparently both the VST and AU units work.  But how? Where/how do I load the plug ins so I can access them in the audio effects folder?
    thanks in advance!
    Alex

    i think the audio plugin manager was something new added, but i dont remember when. as im looking thru older threads at cs5, they make it sound as if premiere will just load and use what it can. when an effect doesn't show up, its usually cause premiere determined it couldn't use it. if you have the 64-bit version of premiere and 64-bit audio plugins, they should work, unless premiere has some issue with them.  i think waves uses vst3 and AU (audio units)?  while vst2 should work in cs5, im not sure if vst3 or au are supported until cs7.  so im at a loss, unless someone else knows better.  if you have access to audition, you can try to load them in there to use.
    Premiere Pro CC (7.0) | Premiere Pro New Features
    Premiere Pro Mac - VST & Audio Unit Support - Something is wrong....
    VST Plugins work in CS4, not in CS5
    VST plug-ins not loaded at all Snow Leopard 10.6
    Virtual Studio Technology - Adobe Premiere Pro

  • 3rd Party Plug-Ins Not Listed Under Inserts

    I have recently installed two 3rd party plug-in software - Stylus RMX and Kontakt 2. I installed the latest versions of the software that are compatible with an Intel based Mac. They appear under the library/audio/plug-ins/components but they do not appear under any of the headings in the Inserts tab.
    Do you I have to reinstall Logic Express 8 after installing the plug-ins? Do I have to direct Logic Express 8 to the components directory. I have read all the manuals and I cannot find the solution.
    Please help.

    Thanks for the quick response. The RMX plug-in is in the Audio Units Manager. When I Reset and Rescan I get the following response which at the end is a pass, but the RMX plug in still does not show up in the Inserts tab.
    Cabarete
    Software response:
    validating Audio Unit Stylus RMX by Spectrasonics:
    AU Validation Tool
    Version: 1.2.1b3
    Copyright 2003-2007, Apple, Inc. All Rights Reserved.
    Specify -h (-help) for command options
    VALIDATING AUDIO UNIT: 'aumu' - 'Styl' - 'GOSW'
    Manufacturer String: Spectrasonics
    AudioUnit name: Stylus RMX
    Component Info: Stylus Audio Unit.
    Component Version: 1.6.1 (0x10601)
    Component's Bundle Version: 1.6.1
    * * PASS
    TESTING OPEN TIMES:
    COLD:
    Time to open AudioUnit: 44.468 ms
    WARM:
    Time to open AudioUnit: 0.124 ms
    FIRST TIME:
    Time for initialization: 0.009 ms
    * * PASS
    VERIFYING DEFAULT SCOPE FORMATS:
    Input Scope Bus Configuration:
    Default Bus Count:0
    Output Scope Bus Configuration:
    Default Bus Count:8
    Format Bus 0: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 1: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 2: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 3: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 4: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 5: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 6: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Format Bus 7: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    * * PASS
    VERIFYING REQUIRED PROPERTIES:
    VERIFYING PROPERTY: Sample Rate
    PASS
    VERIFYING PROPERTY: Stream Format
    PASS
    VERIFYING PROPERTY: Maximum Frames Per Slice
    PASS
    VERIFYING PROPERTY: Last Render Error
    PASS
    VERIFYING PROPERTY: Instrument Count
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/0], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/1], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/2], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/3], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/4], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/5], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/6], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/7], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Group/0], which should be invalid.
    WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Part/0], which should be invalid.
    PASS
    * * PASS
    VERIFYING RECOMMENDED PROPERTIES:
    VERIFYING PROPERTY: Latency
    PASS
    * * PASS
    VERIFYING OPTIONAL PROPERTIES:
    VERIFYING PROPERTY Supported Number of Channels
    PASS
    VERIFYING PROPERTY Tail Time
    PASS
    VERIFYING PROPERTY Bypass Effect
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/0], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/1], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/2], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/3], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/4], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/5], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/6], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/7], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Group/0], which should be invalid.
    WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Part/0], which should be invalid.
    PASS
    VERIFYING PROPERTY Render Quality
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/0], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/1], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/2], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/3], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/4], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/5], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/6], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/7], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Group/0], which should be invalid.
    WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Part/0], which should be invalid.
    PASS
    VERIFYING PROPERTY Host Callbacks
    PASS
    * * PASS
    VERIFYING SPECIAL PROPERTIES:
    VERIFYING CUSTOM UI
    Carbon View Components Available: 1
    auvw StyM VST - Spectrasonics View
    PASS
    Cocoa Views Available: 0
    DEFAULT PRESET: 0, Name: unused
    auvaltool(714) malloc: * error for object 0x13d3f850: double free
    * set a breakpoint in mallocerrorbreak to debug
    HAS FACTORY PRESETS
    VERIFYING CLASS INFO
    WARNING: Preset name is not retained in retrieved class data
    PASS
    TESTING HOST CALLBACKS
    PASS
    * * PASS
    PUBLISHED PARAMETER INFO:
    # # # 74 Global Scope Parameters:
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
    * * PASS
    FORMAT TESTS:
    Reported Channel Capabilities (explicit):
    [0, 2]
    No Input, Output Chans:
    0-1 0-2 0-4 0-5 0-6 0-7 0-8
    X
    WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:1
    WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:4
    WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:5
    WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:6
    WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:7
    WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:8
    * * PASS
    RENDER TESTS:
    Output Format: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
    Render Test at 512 frames
    Slicing Render Test at 64 frames
    PASS
    Render Test at 64 frames, sample rate: 22050 Hz
    Render Test at 137 frames, sample rate: 96000 Hz
    Render Test at 4096 frames, sample rate: 44100 Hz
    Render Test at 4096 frames, sample rate: 192000 Hz
    Render Test at 4096 frames, sample rate: 11025 Hz
    Render Test at 512 frames, sample rate: 48000 Hz
    PASS
    Checking parameter setting
    Using AudioUnitSetParameter
    Using AudioUnitScheduleParameter
    PASS
    * * PASS
    AU VALIDATION SUCCEEDED.
    validation result: successfully validated
    updating properties of AU Stylus RMX by Spectrasonics...done.

  • Question about 3rd party Plug-ins....

    Is it just me or does Logic have some SERIOUS issues with 3rd party AU? For example, I can run Logic with all its own plugins and instruments just fine but the second I go to use my FM7, Novation Bass Station, or impOSCar I start experiencing bugs, crashes, etc... I have the latest drivers for these items, but they just don't seem to want to work well with Logic. Anyone else have this problem or know of a better way to use 3rd party plugins like this more safely in logic? Like maybe installing them as VST's instead of AU and putting them in a VST wrapper for Logic? It's honestly almost impossible to work with any of these devices in Logic for me without causing continual crashes!!

    why to pay for software then you can have a real thing?
    i pay only for hardware cos software is never good it not worth more than a few bucks. I have imposcar and vstation and they work just fine i use vstation alot never had a crash. are you sure that there are these au's for tiger?

  • What are 3rd party plug-ins?

    I always hear people talking about using 3rd party plug-ins in logic but I dont know what they are I have tried looking on the net but cant seem to get a straight answer.I know logic does not support VST plug-ins so are they just the AU plugins you can install in Logic or something completely different please can someone set me straight thanks.

    3rd party (non Apple) Plug Ins can be anything from processing effects to Software synths, samplers, romplers whatever. The AU Plug In format is what Mac's can handle without using VST wrappers. Some users do use VST Plugs with wrappers in Logic but as there are so many AU Plugs out there there is no real need to do so unless you want to use a specific Plug which is only available as an AU Plug In.
    Check the KVR Audio site, they have the best compilation of free and commercial Plug Ins on the net:
    http://www.kvraudio.com/allpluginsononepage.php

  • HP AiO remote doesn't recognize 3rd party toner as compatible in LaserJet M1217nfw MFP

    Hi,
    I have a HP Envy 17 running Windows 8.1, a MacBook Air, an iPhone and a HP LaserJet M1217nfw MFP.  I recently replaced the toner with a 3rd party replacement cartridge and while the printer does give me a "supply memory error" I am still able to print just fine from the Mac and my phone.  I am unable however to print from my Envy.  The HP All-in-One Remote app in Windows 8 gives me an "incompatible cartridge" message and says there are no solutions availble.  Is there a work-around to this?
    I am not very good at Windows 8....
    Thanks

    Hi Thaddeus,
    Although the printer may resoponse to some commands, a supply memory error is an error state about the used cartridge.
    Due the error message on the screen the HP AIO Remote recognize the cartridge as incompatible, that cannot be bypassed
    with any settings, resolving the issue which cause the error message is the only key to resolve a such.
    If the HP AiO Remote fails to print in such condition the only solution is to fully resolve the condition by following the steps listed in my previous post.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • 3rd Party AIFF loops tempo changes from loop library and Logic session

    Hi there,
    Hope somebody out there can help me out!
    I've recently purchased some 3rd party loops, some in AIFF and some in WAV (Which I have converted to AIFF using the Apple Loops Utility), and i have been able to get these into the logic Loop library successfully.....Or so I thought!
    The problem I am having is that when previewing one of my loops it's often double the speed that the set tempo, and this will happen to ALL of my loops. But when I drag one into my session, Logic asks if it should copy over the automation data with it, click yes, and it plays fine in the arrange window. And funnily enough, all of my loops in the library start playing at the correct tempo!
    Once this has all happened, i've tried quitting logic, and re-opening....but the issue just happens again....
    Has anyone else had this problem, or have any idea as to what the issue may be??
    Any help would be greatly appreciated!!
    - Aaron

    Hi there,
    Hope somebody out there can help me out!
    I've recently purchased some 3rd party loops, some in AIFF and some in WAV (Which I have converted to AIFF using the Apple Loops Utility), and i have been able to get these into the logic Loop library successfully.....Or so I thought!
    The problem I am having is that when previewing one of my loops it's often double the speed that the set tempo, and this will happen to ALL of my loops. But when I drag one into my session, Logic asks if it should copy over the automation data with it, click yes, and it plays fine in the arrange window. And funnily enough, all of my loops in the library start playing at the correct tempo!
    Once this has all happened, i've tried quitting logic, and re-opening....but the issue just happens again....
    Has anyone else had this problem, or have any idea as to what the issue may be??
    Any help would be greatly appreciated!!
    - Aaron

  • How can I use a 3rd party XML parser such as xerces with OC4J ?

    Hi all tech experts,
    I am using Oracle Application Server 10g Release 2 (10.1.2) and i have
    installed Portal and Wireless and OracleAS Infrastructure on the same
    computer.
    i tried all the solutions on this thread
    Use of Xerces Parser in out application with Oracle App Server 9.0.4
    but still fighting.
    I have also posted this query on OTN on following thread
    How can I use a 3rd party XML parser such as xerces with OC4J?
    but no reply....
    Please help me on this issue.
    Since OC4J is preconfigured to use the Oracle XML parser which is xmlparserv2.jar.
    i have read the following article which states that
    OC4J is preconfigured to use the Oracle XML parser. The Oracle XML parser is fully JAXP 1.1 compatible and will serve the needs of applications which require JAXP functionality. This approach does not require the download, installation, and configuration of additional XML parsers.
    The Oracle XML parser (xmlparserv2.jar) is configured to load as a system level library of OC4J through it's inclusion as an entry in the Class-Path entry of the oc4j.jar Manifest.mf file. This results in the Oracle XML parser being used for all common deployment and packaging situations. You are not permitted to modify the Manifest.mf file of oc4j.jar.
    It must be noted that configuring OC4J to run with any additional XML parser or JDBC library is not a supported configuration. We do know customers who have managed to successfully replace the system level XML parser and the Oracle JDBC drivers that ship with the product, but we do not support this type of configuration due to the possibility of unexpected system behavior and system errors that might occur from replacing the tested and certified libraries.
    If you absolutely must use an additional XML parser such as xerces, then you have to start OC4J such that the xerces.jar file is loaded at a level above the OC4J system classpath. This can be accomplished using the -Xbootclasspath flag of the JRE.
    i have also run the following command
    java -Xbootclasspath/a:d:\xerces\xerces.jar -jar oc4j.jar
    but no success.
    How could i utilize my jar's like xerces.jar and xalan.jar for parsing instead of OC4J in-built parser ?
    All reply will be highly appreciated.
    Thnx in advance to all.
    Neeraj Sidhaye
    try_catch_finally @ Y !

    Hi Neeraj Sidhaye,
    I am trying to deploy a sample xform application to the Oracle Application Server (10.1.3). However, I encountered the class loader issue that is similar to your stuation. I tried all the three solutions but the application is still use the Oracle xml paser class. I am wondering if you have any insight about this?
    Thanks for your help.
    Xingsheng Qian
    iPass Inc.
    Here is the error message I got.
    Message:
    java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
    Stack Trace:
    org.chiba.xml.xforms.exception.XFormsException: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
         at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
         at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
         at org.chiba.xml.xforms.Container.initModels(Unknown Source)
         at org.chiba.xml.xforms.Container.init(Unknown Source)
         at org.chiba.xml.xforms.ChibaBean.init(Unknown Source)
         at org.chiba.adapter.servlet.ServletAdapter.init(ServletAdapter.java:153)
         at org.chiba.adapter.servlet.ChibaServlet.doGet(ChibaServlet.java:303)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
         at org.chiba.xml.xforms.Instance.iterateModelItems(Unknown Source)
         at org.chiba.xml.xforms.Bind.initializeModelItems(Unknown Source)
         at org.chiba.xml.xforms.Bind.init(Unknown Source)
         at org.chiba.xml.xforms.Initializer.initializeBindElements(Unknown Source)
         at org.chiba.xml.xforms.Model.modelConstruct(Unknown Source)
         at org.chiba.xml.xforms.Model.performDefault(Unknown Source)
         at org.chiba.xml.xforms.XFormsDocument.performDefault(Unknown Source)
         at org.chiba.xml.xforms.XFormsDocument.dispatchEvent(Unknown Source)
         at org.apache.xerces.dom.NodeImpl.dispatchEvent(Unknown Source)
         ... 18 more

  • Airplay no longer working with 3rd party after upgrading to Maverick.

    I updated my MacBook Pro this week and I have noticed that the airplay icon is no longer showing up in iTunes to connect to my Denon Amplifier. The interesting thing is that my old iPad 1 that I have that is still running 5.1.1 can connect and play to the receiver just fine.
    Was there an update to the airplay software that would affect 3rd party devices? I was not able to find any new updates for my receiver.

    I woke up this morning with the same problem (all was fine last night).  Only way to get all my mailbox folders back was to use Time Machine while in Mail, choosing the backup file from previous night and selecting EACH MAILBOX to restore (23 for me).  All appears okay so far today (except some of my accessories in the menu bar are gone). 
    I sure hope an update comes SOON.  In anticipation of Mavericks and the new MAIL I switched from Outlook 2011 3 weeks ago transfering 17,000+ files and would hate to back

  • Credit Memo process in 3rd party order

    Hello All,
    Once 3rd party invoice is completed process as follows: (standard process)
    sale order --> Purchase Requisition --> Purchase Order --> Goods Receipt --> Invoice Verification --> Customer Invoice.
    When you post the customer invoice to accounting, in general system will update
    1.Net Value    2. COGS (Cost of goods sold)   3. Sales Qty.
    Now the scenario is when the vendor cancel his original invoice and reissue the invoice (due to change in price / change in stock item and so on..),
    We have to cancel the customer invoice and issue credit memo invoice (without any reference) for the customer.
    But the problem here is.. when we post the credit invoice to accounting, COGS will not be updated (currently they are adjusting COGS value manually).
    How can we map this scenario ? while creating credit memo invoice we should consider some reference so that COGS should be updated.

    Hello Suresh,
    THERE ARE TWO SCENARIOS HERE.
    Scenario is when the vendor cancel his original invoice and reissue the invoice (due to change in price / change in stock item and so on..),We have to cancel the customer invoice and issue credit memo invoice (without any reference) for the customer.
    > IF THE VENDOR GRANTS YOU A CREDIT MEMO ON THE QUANTITY OR VALUE BASIS, YOU CAN DIRECTLY PASS ON THIS TO CUSTOMER BY RAISING CREDIT MEMO (THIRD PARTY CREDIT MEMO IS G2S), THIS WORKS WITH ITEM CATEGORY 'TASG' (THIRD PARTY CREDIT MEMO ITEM). THE SALES RELEVANT INDICATOR ' F' IS SET IN CUSTOMISING FOR SALES FOR THIS ITEM CATEGORY. THIS MEANS THAT THE COST IS NOT CREATED.
    --->IF THE VENDOR CALCULATES ADDITIONAL COSTS FOR YOU ONCE THE THIRD PARTY BUSINESS TRANSACTIONS HAVE ALREADY BEEN BILLED. THE COSTS FROM THE INVOICE RECEIPT ARE THEN CORRECTED IN THE CUSTOMER BILLING DOCUMENT WHICH HAVE ALREADY BEEN CREATED. SUBSEQUENT DEBITS FROM THE INVOICE RECEIPTS ARE COPIED TO PROFITABILITY ANALYSIS AS A DIFFERENCE AMOUNT. THIS MEANS THAT THE COST IS UPDATED HERE ALSO. IN ACCRUED PROFITABILITY ANALYSIS, THE COSTS ARE NOT COPIED FROM THE INVOICE RECEIPT, BUT FROM THE CUSTOMER BILLING DOCUMENT.
    EXAMPLE:In the context of a third-party business transaction, you create a sales order for over 100 pieces.
    A purchase requisition and a purchase order are generated. Ten pieces are delivered to the customer, and a billing document is then sent to the customer when the 10 pieces are delivered. The vendor sets a subsequent debit of 100 USD for shipping costs in the invoice. The cost is nowupdated in the billing document created, and in the profitability analysis (in this case, it is raised
    by 100 USD).

  • 3rd party signature handler set in Adobe Acrobat 9 Professional Extended gets reset

    Hi All,
    I have got a 3rd party digital signature creating plug-in i.e. MySign . I have set it inside 'Preference > Security > Advanced Preferences > Creation > Default Method to Use when Signing and Encrypting Documents' > MySign. If I restart Adobe Acrobat that setting is lost and the Adobe Default Security handler is then used.
    I don't want to set handler manually every time I restart Adobe Acrobat. I have figured out that Adobe Acrobat is creating a registry entry named aPrivKey against that inside cHandlers BUT it gets removed on Adobe restart if I set MySign as the handler in the first place.
    Similarly I want the same handler to verify signatures. For that I have set 'Preferences > Security > Advanced Preferences > Verification > Always use the default method (overrides the document-specified method)' along with the name of handler i.e MySign but on restart of Adobe, this is also gets reset.
    Any idea how to set my handler as default to sign & verify without getting it reset?
    Regards,
    Wahaj

    Hi All,
    I checked with Adobe X and this issue is not present there.
    Regards,
    Wahaj

  • Adobe Muse form with 3rd party host is not working

    I have uploaded a form with Adobe Muse to a 3rd party host.  Upon testing the link scripts/form_check.php, I see 3 green checkmarks.  Upon testing the form, the form appears to submit successfully, however I never receive the email.
    I checked with the hosting company and this is what they said:
    ...this form is using localhost smtp of webserver which was stopped due to spamming issues...actually, localhost doesn't have proper rDNS record and the return path for all mails is the server itself, so whenever a client uses its domain for spamming the server's mail queue gets choked and creates issues for others. So we generally do not open localhost smtp and recommend users to use proper SMTP Authentication so that each mail will be delivered and won't create issues for server even if someone does spamming because in that case all mails will bounce back to the mailbox.  So, we recommend you to use smtp authentication in the form and use proper smtp details to send mail.
    Please provide a recommendation on what I should do to resolve this?  Is there a way to modify the form so that it uses proper SMTP Authentication instead of Localhost?

    Hi
    Please refer to this document :
    https://forums.adobe.com/docs/DOC-3581
    Thanks,
    Sanjit

  • Service desk integration with 3rd party tool

    Hi all,
    I've problems understanding the setup of connecting a 3rd party service desk tool with solman itsm.
    So far it's clear that I need to activate and configure the service provider and consumer in soamanager.
    The webservice then will be called by the 3rd party tool with corresponding data.
    However, according to spro I need to define a value mapping for incoming/outgoing calls.
    I do not understand this mapping... the WSDL of webservice ICT_SERVICE_DESK_API contains lots of fields, but in spro -> value mapping I can only define the following fields (which are hard coded in type pool AIICT):
    SAPCategory
    SAPComponent
    SAPDatabase
    SAPFrontend
    SAPIncidentID
    SAPIncidentStatus
    SAPInstNo
    SAPOperatingSystem
    SAPSoftwareComponent
    SAPSoftwareComponentPatch
    SAPSoftwareComponentRelease
    SAPSubject
    SAPSystemClient
    SAPSystemID
    SAPSystemType
    SAPUserStatus
    What about attachments, priority etc.?
    Will the interface parameters mapped to these ones?
    For what purpose do I need to maintain the value mapping?
    Can you give me a hint?
    Regards, Richard Pietsch

    can you please check the WIKI Solution manager Service Desk Integration with third party service desk - SAP Solution Manager - Security and Authorizat…

  • Using 3rd party binary in script that is run as job

    Hi all,
    I have several scripts to do various tasks with IIS logs we receive from all our various web servers.  One script unzips logs, another logparses to grab a few fields then sftp to a 3rd party for analysis, another will encrypt the original zip files
    in prep for ftp to 3rd party, another will ftp to that 3rd party, and yet another will analyse the logs with our in house analytiscs application.
    I want to have a master script that will run these other scripts as jobs so that it will control when to start certain scripts based on the state of the jobs.  It all seemed to work great as I was setting up test jobs, until I added '3rd' party executables
    like 7-zip, ftp.exe, winscp, etc...  The jobs would just go to failed state when they hit the executables.
    That's not my current problem though as I found out that if I used the
    -windowstyle hidden option for start-process then everything ran as expected, that is until I wanted to log output from the 3rd party app.  FTP for example.
    I tried this:
    $ftpexe = "C:\windows\System32\ftp.exe"
    $ftpscr="d:\scripts\ftpscrtmp.txt"
    "open 111.1.1.1`r`nSomeFTPuser`r`nSomepassword <..bunch of other ftp commands>" | Out-File -FilePath $ftpscr -Append -Encoding "ASCII"
    start-process -wait -filepath $ftpexe -argumentlist $ftparglist  -RedirectStandardOutput $ftplog -windowstyle hidden
    However, asking powershell to redirect output of a hidden window was probably like asking someone to cover their eyes and read a book and it let me know it.
    I have tried without using -windowstyle hidden and not having any luck.  I want to capture the output of the ftp commands so that I can make sure the file was transferred successfully.  If I run the script without -windowstyle hidden and not as
    a job it works, and I can test the output.  I really want to be able to run this script as a job AND get the output of the ftp to a file... advice?
    Thanks in advance!

    This works with no problem for me.
    Start-Process -wait -filepath ftp.exe -argumentlist  '-s:c:\scripts\ftpcmd.txt' -RedirectStandardOutput c:\scripts\ftp.log
    I get no window and the file gets written.
    This is my ftp command file:
    open ftp.microsoft.com
    anonymous
    [email protected]
    ls
    bye
    ¯\_(ツ)_/¯

Maybe you are looking for

  • Get document number in user exit EXIT_SAPLMRMC_001 (MIRO)

    Hi, i'm implementing exit MM08R002, FM EXIT_SAPLMRMC_001(changing tolerance check). In this FM I need to get document number that the user is modifying. But in the import parameters i don't have the document number. I have found FM (MRM_PROT_GET), wh

  • Image preview (thumbnail) help request

    I'm a recent convert from PC to the new imac *LOVE IT!* However, I'm very accustomed to the beautiful little option in windows to preview thumbnails of image files within their folders, WITHOUT opening them in a program to view them... this does not

  • Problem since ipod touch has been used

    Since I started using my ipod to view my mail (gmail) my mail on my macbook has stopped responding. I am just getting a spinning wheel on the main gmail account, and if I try to send something the sent mail box also spins. The mail activity box shows

  • How To Set Excel Column Format Latebinding

    private void WriteToExcel(ref System.Data.DataTable dtExcel) //Microsoft.Office.Interop.Excel.Application oXL = null; //Microsoft.Office.Interop.Excel._Workbook oWB;s //Microsoft.Office.Interop.Excel._Worksheet oSheet; //SaveFileDialog SFD = new Save

  • Two questions - Clipping Mask and Change color in group

    Hello, I have a file I rendered in Maya as a vector. I am not that great with illustrator, so I was trying to speed things up... Anyway, it appears all the file have a Clipping Mask. If I unrelease it, it shows a plain with a similiar dimensions that