3rd party call log software questions

Does anyone know of a Centro-compatible 3rd party call log manager that lets me delete/purge multiple entries at once, ie, something like each entry has a checkbox and if it's checked, you can select delete (or purge) and just those entries get removed? I guess I make a lot of phone calls, and it gets extremely cumbersome to delete/purge entries individually. I'd love to select multiple non-consecutive entries then be able to delete them all at once. Any suggestions?
Thanks, Mike
Post relates to: Centro (Sprint)

I haven't seen any 3rd party programs that have the feature you are requesting. You can do an internet search to see if you can find one.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=centro&mn=centro&cn=sprint
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705

Similar Messages

IPhone 5 32GB echo voice during 3rd party call reject

Dear all,
Have anyone experience echoing voice especially for iPhone 32GB during 3rd party call reject? (Doesn't happen to 16GB and 64GB)
During phone call if the other party rejects the call, you could hear echo background voice right after the busy tone.
Appreciate if someone could share some joy in solving this very annoying problem. Have tried restoring and setting up as new phone both with negative result. Currently running 6.1.3.
Best regards,
MW

Having the same issue with a 4S

Cisco 8841 support for 3rd party call control

Hi Cisco Team,
What is required to get Cisco 8841 IP phone configured as a SIP phone for 3rd party call control?

Hi,
This information would be dependent on which third party you are integrating with, they should provide details of settings needed for the same. For supporting third party SIP endpoints with Cisco there are numerous docs / posts , but in your case the scenario is reverse.
HTH
Manish

Can I use a USB camera with the 3rd party USB camera software and share screens?

I want to do more than just use a USB camera w/iChat (or ichatusb). I also need to be able to initiate screen sharing between two computers. Specifically, I will use iChat with an insight built in camera on my end, and the other person will be using an iMac G5 PPC using a USB camera and the 3rd party USB software for USB ichat support.
My question then is am I able to request screen sharing (taking over their screen) from my ichat/fw combo to their ichatusb/usb combo?
thanks
dc

Hi,
The Cameras don't come into this at all. (But iChat and OS versions do)
Each end needs iChat 4 or higher.
Go to the Video menu and Enable Screen Sharing (Selecting toggles a tick On and Off (Tick Present is ON) )
Highlight Buddy in list and use the Screen Sharing icon at the bottom of the list (interlinked rectangles).
The G5 could be on Leopard (iChat 4) and be using a USB 1.1 camera that would need iUSBCam (formerly iChatUSBCam) as well as the Camera manufacturers Software.
iChat 3 (In Tiger OS 10.4.x) on the G5 with a USB 1.1 camera, Software and iUSBCam may well offer a Screen Sharing option (Or rather Desktop as Video Feed) in the iChat > Video Menu and that will not work
However if the G5 has USB 2.0 ports (not the Keyboard additional ports) then if it is up to OS 10.4.9 it can use a UVC Camera for Video Chats (UVC = USB Video Class No need for Additional Drivers) but Screen Sharing will still be an issue due to the iChat version.
IF the G5 is still on OS 10.4.x then you will have to use a third Party VNC app at both ends (And run a iChat Audio Chat along side)
9:33 PM Friday; September 2, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Relying on 3rd-Party/Open Source Software for fully functionality in Vi

Is it just me or are open source software engineers doing a better job than actual Creative software engineers?
There are several threads linking to 3rd-Party hacks to get the majority of Creative Apps working in Vista. As well as this there are the KXProject Drivers floating around which appear to offer better compatability than the current Creative drivers.
What's going on Creative? How many Software Engineers do you actually have working for you?
Why is it, people you don't even pay are making much greater developments and progress in drivers and software for Vista?
But i guess they're not charging customers to purchase?updates on?CD. I remember when the Audigy was released, instead of offering downloads, Creative actually asked people to buy an updated CD with software and drivers on. Of course we were only?charged for postage, but very expensi've postage nevertheless.Message Edited by AnnoyedCustomer on 03-09-200703:3 PM

Hi welcome to the forum, I hope you find lots of help here and we look forward to your contributions as well
In regards to your questions:
1: No, you just put a swf file on the server
2. You can host the smaller app on your site and then give them an iframe linking to it
3. Nope, no problems there
Hope this helps
Best regards
Nikos

Implementing 3rd party SCORM compliant software onto Oracle ilearning

I am having real trouble uploading SCORM compliant software into Oracle iLearning can anyone help??

Hi,
I've implemented quite a lot of 3rd party SCORM content onto iLearning and have to say it is rarely as easy as it's supposed to be due to the nuances of different authoring tools, production techniques and SCORM packaging methods.
Could you let me know a little more detail on the errors you are geting and I'll see if I can help.
Jon
Quistor UK
[email protected]

3rd party iPhone 5 adapter question

I recently bought the iPhone 5 from AT&T and while i was there they said something that if i were to used a 3rd party adapter to charge my phone, i would leave a electric stamp in the phone and would void out any warranty and the same thing for 3rd party cases. Now to me, it sort of sounded like a crock to try to get me to buy thier marked up products but is there any truth to this?
Thanks in advance.

Ok so let's work out how much I need to spend on adapters!
We have 3 iPhone 4's in the house which I would love to upgrade to iPhone 5's plus 1 ipod touch which again I would love to upgrade.
We have 1 speaker dock in the dining room, 1 in the living room and 2 upstairs! Now charging is not a problem cos I will get lightning cables with all the new devices!
All of my docks are on many occasions being used at once!
So I need £120 worth of adapters.... Which to be honest are a bit ugly and I'm not convinced will fit some of my devices!!!
I got about £400 quids worth of equiptment which is now redundant unless I spend another £120!!
I personally am only one of many whos is not happy with having to buy the adapter!
I understand the need to move with times and thik the cable is brilliant! But common I bet it only costs a fiver to make!!!

A 3rd Party system restore software story.

    Hi all. This will probably only apply to those of you on this forum that don't have a very strong knowledge base of Windows and how to correct major system issues, etc., like myself. I had my first serious hard-drive crash yesterday. I tried installing some older software on Vista, and upon reboot, I would only get blue-screened and then rebooted and then blue-screened, so on so forth. I had purchased a copy of Acronis True Image 11 based on some internet reviews and had been backing up my system weekly. Of course, I had not tried the software out, as I wasn't going to wipe my drive just for the fun of it, so when my system got messed over by me, myself and I, I definitely had a moment of panick as to wether or not the restore software would work. I can honestly say it was a well spent 40 bucks.
    The install CD from Acronis is also bootable, so once I figured out I was in over my head since Vista wouldn't even boot into safe mode, I tossed the cd in and waited for the worst. It booted me right to the main software menu, which is very user friendly, and in about a minute and half I was on my way to re-imaging (if that is the correct term) my hard-drive.
    All in all, it took near 5 hours to complete as I selected every verification and fail-safe option the software had, but finally it spat out that the process was complete. I threw up a quick prayer, and clicked OK to reboot the PC. Everything booted right back up just fine. No weird driver errors, or configuration issues. Nothing but a functional OS, and functional everything-else software.
    If anyone is thinking abotu buying backup software or can't make a decision, I would highly recommend Acronis. It's very simple to use, and I can tell you it actually works flawlessly.
    Hope this is a help for anyone who needs it.

Thanks again Bear,
I have Roxio 5 so that would have been fun also... LOL. Did you give a thought to the Windows Restore app also? BTW for MP3s I think some of the cars see MP3 but depends on the bit rate that you burn them. Some can do the 128 others the full 320bit. I use Cakewalk Pyro because if it's super ease and use. The Creative X-FI Pro does come with some nice software like the Pyro but is a bit complicated. Thanks again for the info.
Lenovo 3000K100 Intel Core2 Quad Vista Home Premium BFG 8800GT-OC 512MB PCIe 500GB SATA HD 4GB PC-5300 DDR2 DVD +/- RW DL x2 SATA Creative X-FI Pro + Mods

Reco for 3rd party Chroma-keying software (Ultimatte or better)

Does anyone have any experience of working with Ultimatte AdvantEdge Chroma Key Software? I'm looking for something that will key nicely in post and perform better than the built-in doo-dah in our beloved FCP (not that there's anything too wrong with that). Meanwhile footage-wise, everything is stunningly lit (flat where it should flat, even where it should be even, excellent color temperature, etc). It couldn't be shot any better. God, it is soooo beautiful. And the costumes, simply breathtaking... wonderful color balance and choices. This was shot and designed by true creative geniuses.
But I digress. So, if anyone has an info about Advantage or any other chroma-keying software drop me a note.
Oh, and please no "should ofs" I'm just the bleedin' editor. And by the way... did I mention the footage is stunningly beautiful?
Thanks

I have five keyers including Ultimatte, which is pricey.
I prefer dvmatte pro from dvxgarage, which isn't pricey

Contracts Management 3rd Party Software

Good afternoon,
I have been asked to implement a Contracts Management solution using SharePoint 2010. I am by no means a professional and I feel this is beyond my abilities. I created a custom list with expiry date. Also it lists the contracts ending in 60days and ending
in 120days. There will be roughly 500 contracts uploaded to the custom list/library. I have since been asked to have the contracts sorted within groups (not folders) I am not sure how to do that. A SharePoint Designer workflow is needed to alert someone when
the contract is up for renewal. I have read all the threads and Google info regarding that step and I can not get it to work.
Is there a 3rd party Contracts Management software out there that can be used via SharePoint? I have a feeling my simple solution will not be good enough as I am sure they will need files archiving and more functionality down the road.
Thank you.

To group the items in the list is really easy once you know how. Let's say you have a choice field called 'market area' which might be Public, Education, Finance etc.
You can then create a 'view' in the list that groups the items by that column.
http://office.microsoft.com/en-gb/sharepoint-server-help/create-modify-or-delete-a-view-HA010377693.aspx
There's a dozen ways to do the notification emails bit. The simplest, and best, is to create a 'Policy' in the list for that document.
This is an example of someone doing what you wanted (and asking for a bit more which is trickier)
http://sharepoint.stackexchange.com/questions/83019/email-group-when-documents-reaches-expiry-date
There's going to be a million 3rd party tools that can work with SharePoint to greater or lesser degrees. If you really want to determine what to go for you'll need to do a full requirement capture exercise to identify exactly what the system needs to do.
One of SharePoint's strengths that is often underrated is that it's highly flexible compared to most software at that scale.

Get skype call log from a year ago

Dear Skype friends,
i'm in a middle of a huge law suit and i need to show my skype chat logs for a specific contact i chat with from June 2012 untill September 2013.
Please, is there any way to get that info from my account?

Hi, Shahar2k5, and welcome to the Community,
If you are still using the same computer, and the Skype files are intact, you might try a third-party chat-logging software add-on such as freeware from Nirsoft. Instant message chat history is stored on the computer used.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Cisco Telepresence and Meeting Place Integration with Third Party Call Pros

Dear colleages:
i want to ask if Cisco Telepresence can integrate with 3rd party call processing systems.
as my project has already existing Nortel Communication Server 1000,
which supports:
Operating System: VXWorks and Linux
Network Signaling Protocols: H.323v4, MCDN, SIP, LDAP, QSig, QSS, in band and DPNSS
Trunking Support:
IP:IP Virtual Trunks using IP Peer Networking over H.323 or SIP
Digital: DTI, ISDN-PRI, ISDN-BRI
Analog: Loop and Ground Start CO, FX, WATS, two or four wire E&M, four wire DX, DID, TIE, RAN Paging.
and i want to build Video Converence system over the WAN.
please to tell me if that integration is possible and what is the design components that is required for such project to be handled from A- to Z.
Regards,

I have been told that i need to use SIP protocol API instead of TAPI to have a TRUE VOIP Windows solution.
Could you guys please tell me the difference between SIP API and TAPI?
And could you please suggest a way which API (SPI or TAPI) the OnCast solution is based on (http://www.litescape.com/oncastsoftware.html) - we have to develop something similar.
Thank you for your replies,
Alexey

No 3rd Party Plug-In Support in Prelude?

Hi,
I am hoping to utilize this third-party plug-in linked below with Adobe Prelude to ingest Ikegami MXF media, perform pre-edits and transcode from camera media to permanent storage
http://http://www.mainconcept.com/products/apps-plug-ins/plug-ins-for-adobe/t otalcode-cs-5-6.htmlhttp://
The plug-in works great in Premiere, but doesn't seem to be recognized by Prelude. See this thread linked below.
http://forums.adobe.com/message/4621685#4621685
The creaters of Total Code have informed me that Prelude does not support any 3rd party plug-in software. Is this true? If so, seems like a big oversight on Adobe's part given Prelude's place in the workflow for batch transcodes. Any chance 3rd party support is expected to be built in via a CS6 update?
Thanks,
Lindsay

Thanks for your help Zac. I hope you can get ot the bottom of this for me. I have corresponded with Total Code via email support and they kindly pointed the finger back at Adobe, but I have the feeling someone like your self may have a bit more sway. Please keep me posted and thanks again.
Lindsay

3rd party Internet Security disables CD Drive on Satellite A30

sorry for posting help about 3rd party Internet Security software on a toshiba forum but ive been told its to do with my toshiba cd drive. Well without it installed (which i repeatdly said to Norton) it works well but with it installed auto run dosnt work and it is very hard to access the cd drive. I reckon that many people have had and solved the problem im having so please could you share with me how to do this. Yours Sincerely,
Daniel Short

Hi Daniel,
so far as I know Norton disables the autorun function. The very slow access of the cd rom is based on the "auto check" function of the Norton Anti Virus.
But please don't ask me where to disable this function.
In my opinion, Norton was not build for notebooks , cause it disables very much functions that a needful.
I use another program... ;)
bye

3rd Party Plug-Ins Not Listed Under Inserts

I have recently installed two 3rd party plug-in software - Stylus RMX and Kontakt 2. I installed the latest versions of the software that are compatible with an Intel based Mac. They appear under the library/audio/plug-ins/components but they do not appear under any of the headings in the Inserts tab.
Do you I have to reinstall Logic Express 8 after installing the plug-ins? Do I have to direct Logic Express 8 to the components directory. I have read all the manuals and I cannot find the solution.
Please help.

Thanks for the quick response. The RMX plug-in is in the Audio Units Manager. When I Reset and Rescan I get the following response which at the end is a pass, but the RMX plug in still does not show up in the Inserts tab.
Cabarete
Software response:
validating Audio Unit Stylus RMX by Spectrasonics:
AU Validation Tool
Version: 1.2.1b3
Copyright 2003-2007, Apple, Inc. All Rights Reserved.
Specify -h (-help) for command options
VALIDATING AUDIO UNIT: 'aumu' - 'Styl' - 'GOSW'
Manufacturer String: Spectrasonics
AudioUnit name: Stylus RMX
Component Info: Stylus Audio Unit.
Component Version: 1.6.1 (0x10601)
Component's Bundle Version: 1.6.1
* * PASS
TESTING OPEN TIMES:
COLD:
Time to open AudioUnit: 44.468 ms
WARM:
Time to open AudioUnit: 0.124 ms
FIRST TIME:
Time for initialization: 0.009 ms
* * PASS
VERIFYING DEFAULT SCOPE FORMATS:
Input Scope Bus Configuration:
Default Bus Count:0
Output Scope Bus Configuration:
Default Bus Count:8
Format Bus 0: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 1: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 2: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 3: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 4: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 5: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 6: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 7: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
* * PASS
VERIFYING REQUIRED PROPERTIES:
VERIFYING PROPERTY: Sample Rate
PASS
VERIFYING PROPERTY: Stream Format
PASS
VERIFYING PROPERTY: Maximum Frames Per Slice
PASS
VERIFYING PROPERTY: Last Render Error
PASS
VERIFYING PROPERTY: Instrument Count
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/0], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/1], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/2], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/3], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/4], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/5], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/6], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/7], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Group/0], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Part/0], which should be invalid.
PASS
* * PASS
VERIFYING RECOMMENDED PROPERTIES:
VERIFYING PROPERTY: Latency
PASS
* * PASS
VERIFYING OPTIONAL PROPERTIES:
VERIFYING PROPERTY Supported Number of Channels
PASS
VERIFYING PROPERTY Tail Time
PASS
VERIFYING PROPERTY Bypass Effect
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/0], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/1], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/2], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/3], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/4], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/5], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/6], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/7], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Group/0], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Part/0], which should be invalid.
PASS
VERIFYING PROPERTY Render Quality
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/0], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/1], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/2], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/3], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/4], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/5], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/6], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/7], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Group/0], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Part/0], which should be invalid.
PASS
VERIFYING PROPERTY Host Callbacks
PASS
* * PASS
VERIFYING SPECIAL PROPERTIES:
VERIFYING CUSTOM UI
Carbon View Components Available: 1
auvw StyM VST - Spectrasonics View
PASS
Cocoa Views Available: 0
DEFAULT PRESET: 0, Name: unused
auvaltool(714) malloc: * error for object 0x13d3f850: double free
* set a breakpoint in mallocerrorbreak to debug
HAS FACTORY PRESETS
VERIFYING CLASS INFO
WARNING: Preset name is not retained in retrieved class data
PASS
TESTING HOST CALLBACKS
PASS
* * PASS
PUBLISHED PARAMETER INFO:
# # # 74 Global Scope Parameters:
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
* * PASS
FORMAT TESTS:
Reported Channel Capabilities (explicit):
[0, 2]
No Input, Output Chans:
0-1 0-2 0-4 0-5 0-6 0-7 0-8
X
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:1
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:4
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:5
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:6
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:7
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:8
* * PASS
RENDER TESTS:
Output Format: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Render Test at 512 frames
Slicing Render Test at 64 frames
PASS
Render Test at 64 frames, sample rate: 22050 Hz
Render Test at 137 frames, sample rate: 96000 Hz
Render Test at 4096 frames, sample rate: 44100 Hz
Render Test at 4096 frames, sample rate: 192000 Hz
Render Test at 4096 frames, sample rate: 11025 Hz
Render Test at 512 frames, sample rate: 48000 Hz
PASS
Checking parameter setting
Using AudioUnitSetParameter
Using AudioUnitScheduleParameter
PASS
* * PASS
AU VALIDATION SUCCEEDED.
validation result: successfully validated
updating properties of AU Stylus RMX by Spectrasonics...done.

3rd party call log software questions

Similar Messages

Maybe you are looking for