3rd party chargers?

Hi there,
has anyone of you a 3rd party charger for his 5G? If yes, which one are you using?
I bought one over Ebay, which definitely is working with the 4th Generation. But the one I got doesn't work with my new iPod. The seller told me that he was wondering whether the new iPod uses a so-called USB Ping (don't ask me about it, I have as much technical understanding as my cat)!?
So, if anyone really knows, whether 3rd party chargers work or do not work. PLEASE post. Thank you.
Regards from Germany,
Mara

Hey,
There have been many, MANY, people on these boards that have used 3rd party chargers, even from "reputable" sellers, and have gotten their iPod completely messed up. Your warranty WON'T cover damage from a 3rd party charger. In my opinion, it's just not worth it...
-Matt

Similar Messages

Is it safe to use 3rd party chargers

is it safe to use 3rd party chargers on the ipod touch 4g or can it mess up the touchscreen or should i get the official apple ones because i have heard some of them blowing up :O and catching fire so do they get hot while they are charging (uk 3 pin) thanks

I sometimes charge mine from my iPad 1 charger or my Griffen charger I purchased from my 3G Nano.
s.salmanhussain10 wrote:
bob please tell me so its safe to charge from ipad original charger? n from any iphone(original/3rdparty) charger ?
thanx

Did apple send an update that eliminates any 3rd party chargers?

Having an issue on my iPad Air. I have some apple brand chargers and some others around the house. Usually use the non branded because of the longer cord and bedside location. All chargers were working fine until Tuesday. Now none of the non apple chargers will charge it from any location. They all make the usual sound when connected but now say "not charging". Nothing has changed on my end.
Did apple send an update that eliminates any 3rd party chargers? That would be very heavy handed and downright unfair.
Does anyone know what is causing this?

I believe that yes, the iOS 8.x update is more touchy/sensitive to what charger you use, especially on higher current devices like the iPad. I would assume that this behavior is to more strictly regulate what chargers work/don't work and to more adequately & safely and charge the iPad. I really doubt it was meant to "eliminate any 3rd party chargers". 3rd party chargers may not provide enough current to adequately charge the device, especially those of low amperage and/or those meant to charge the iPhone/iPod.
Check your 3rd party chargers and make sure they provide 10 amps or more of output current. Those that do not are more likely to not charge correctly and display the "not charging" message.

Will not charge with 3rd party chargers when asleep

My iphone 3g does not charge when plugged into a 3rd party charger and the phone is asleep. I can confirm that its not charging because the phone is still out of battery even after being plugged in overnight, and the griffin charger has a LED indicator that shows if its actively charging or not. I tired this with both a Griffin iphone charger and a Belkin charger.
When waking up the phone though, it of course shows that its charging. It took me a while to figure out that it wasnt chargin when it was asleep.
Does this happen to anyone else?

Do these chargers say that they are made to work with iphone?
The iphone 3g does not charge via firewire pins as the original did. This could be your problem.
There are many posts on charging issues due to firewire compatibility. You can do a forum search to find out more.

My original iphone 5 charger has broken, unable to use 3rd party charger has left me with no phone!

I am now left without a phone APPLE, either send me a replacement charger free of charge (Iphone 5 charger shouldnt be breaking due to wear and tear already!) or allow me to use a 3rd party charger as frankly £30 for a replacement charger that broke without being my fault is ridiculous!

Telephone Technical Support: Expired
You are eligible to purchase telephone technical support from an Apple Advisor.
Contact Apple Support
Repairs and Service Coverage: Expired
Our records indicate that your product is not covered under Apple's 1-year limited warranty or AppleCare Protection Plan for hardware repairs and service based on the estimated expiration date.
Learn about Apple's coverage information for your product.
Didnt know iphone 5's were 12 months old! Its been broken for ages! Ive used 3 3rd party chargers already I wish I knew.
My request still stands to apple, i want a replacement.

Why is my 3rd party ipad mini charger stop working and showing up as non certified/unreliable?

Hi.
Last night I unpluged my ipad to bring it to my living room and the charger was working fine.
3 hours later I bring it to my room again to charge it. (It was at 18%) and it wouldnt charge.
I turned on my xbox 360 Original and when I pluged it in to my xbox it said "This cable is un-certified or unreliable to this device."
I said "Must be the xbox." I then plugged it into my 10 watt USB power adapter. Same message.
I tried it with the brick that came with the ipad.It was the same message. I then tried it with my brick that xame with my Ipod touch.
Same. I only had one more brick and that was my camoflauged brick. Same message. I then tried plugging it into my Windows 8.1 Gateway laptop.
It wont even show up on I-exsplorer! I then gave up. I really hope someone can help me with this.
(I have never jailbroke my ipad, I already have 2 official chargers that broke and one broke in 1 week, Its also dead right now and nobody i know has a new fashioned charger. It is also a 3rd party charger that is saying that. I also had it for a month and it never had problems ever.)
Please help.

In the meantime, plug your USB cable into your computer. It may say "Not Charging", however, it will charge, but slowly.
 Cheers, Tom

HP AiO remote doesn't recognize 3rd party toner as compatible in LaserJet M1217nfw MFP

Hi,
I have a HP Envy 17 running Windows 8.1, a MacBook Air, an iPhone and a HP LaserJet M1217nfw MFP. I recently replaced the toner with a 3rd party replacement cartridge and while the printer does give me a "supply memory error" I am still able to print just fine from the Mac and my phone. I am unable however to print from my Envy. The HP All-in-One Remote app in Windows 8 gives me an "incompatible cartridge" message and says there are no solutions availble. Is there a work-around to this?
I am not very good at Windows 8....
Thanks

Hi Thaddeus,
Although the printer may resoponse to some commands, a supply memory error is an error state about the used cartridge.
Due the error message on the screen the HP AIO Remote recognize the cartridge as incompatible, that cannot be bypassed
with any settings, resolving the issue which cause the error message is the only key to resolve a such.
If the HP AiO Remote fails to print in such condition the only solution is to fully resolve the condition by following the steps listed in my previous post.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

3rd Party AIFF loops tempo changes from loop library and Logic session

Hi there,
Hope somebody out there can help me out!
I've recently purchased some 3rd party loops, some in AIFF and some in WAV (Which I have converted to AIFF using the Apple Loops Utility), and i have been able to get these into the logic Loop library successfully.....Or so I thought!
The problem I am having is that when previewing one of my loops it's often double the speed that the set tempo, and this will happen to ALL of my loops. But when I drag one into my session, Logic asks if it should copy over the automation data with it, click yes, and it plays fine in the arrange window. And funnily enough, all of my loops in the library start playing at the correct tempo!
Once this has all happened, i've tried quitting logic, and re-opening....but the issue just happens again....
Has anyone else had this problem, or have any idea as to what the issue may be??
Any help would be greatly appreciated!!
- Aaron

Hi there,
Hope somebody out there can help me out!
I've recently purchased some 3rd party loops, some in AIFF and some in WAV (Which I have converted to AIFF using the Apple Loops Utility), and i have been able to get these into the logic Loop library successfully.....Or so I thought!
The problem I am having is that when previewing one of my loops it's often double the speed that the set tempo, and this will happen to ALL of my loops. But when I drag one into my session, Logic asks if it should copy over the automation data with it, click yes, and it plays fine in the arrange window. And funnily enough, all of my loops in the library start playing at the correct tempo!
Once this has all happened, i've tried quitting logic, and re-opening....but the issue just happens again....
Has anyone else had this problem, or have any idea as to what the issue may be??
Any help would be greatly appreciated!!
- Aaron

How can I use a 3rd party XML parser such as xerces with OC4J ?

Hi all tech experts,
I am using Oracle Application Server 10g Release 2 (10.1.2) and i have
installed Portal and Wireless and OracleAS Infrastructure on the same
computer.
i tried all the solutions on this thread
Use of Xerces Parser in out application with Oracle App Server 9.0.4
but still fighting.
I have also posted this query on OTN on following thread
How can I use a 3rd party XML parser such as xerces with OC4J?
but no reply....
Please help me on this issue.
Since OC4J is preconfigured to use the Oracle XML parser which is xmlparserv2.jar.
i have read the following article which states that
OC4J is preconfigured to use the Oracle XML parser. The Oracle XML parser is fully JAXP 1.1 compatible and will serve the needs of applications which require JAXP functionality. This approach does not require the download, installation, and configuration of additional XML parsers.
The Oracle XML parser (xmlparserv2.jar) is configured to load as a system level library of OC4J through it's inclusion as an entry in the Class-Path entry of the oc4j.jar Manifest.mf file. This results in the Oracle XML parser being used for all common deployment and packaging situations. You are not permitted to modify the Manifest.mf file of oc4j.jar.
It must be noted that configuring OC4J to run with any additional XML parser or JDBC library is not a supported configuration. We do know customers who have managed to successfully replace the system level XML parser and the Oracle JDBC drivers that ship with the product, but we do not support this type of configuration due to the possibility of unexpected system behavior and system errors that might occur from replacing the tested and certified libraries.
If you absolutely must use an additional XML parser such as xerces, then you have to start OC4J such that the xerces.jar file is loaded at a level above the OC4J system classpath. This can be accomplished using the -Xbootclasspath flag of the JRE.
i have also run the following command
java -Xbootclasspath/a:d:\xerces\xerces.jar -jar oc4j.jar
but no success.
How could i utilize my jar's like xerces.jar and xalan.jar for parsing instead of OC4J in-built parser ?
All reply will be highly appreciated.
Thnx in advance to all.
Neeraj Sidhaye
try_catch_finally @ Y !

Hi Neeraj Sidhaye,
I am trying to deploy a sample xform application to the Oracle Application Server (10.1.3). However, I encountered the class loader issue that is similar to your stuation. I tried all the three solutions but the application is still use the Oracle xml paser class. I am wondering if you have any insight about this?
Thanks for your help.
Xingsheng Qian
iPass Inc.
Here is the error message I got.
Message:
java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
Stack Trace:
org.chiba.xml.xforms.exception.XFormsException: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
     at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
     at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
     at org.chiba.xml.xforms.Container.initModels(Unknown Source)
     at org.chiba.xml.xforms.Container.init(Unknown Source)
     at org.chiba.xml.xforms.ChibaBean.init(Unknown Source)
     at org.chiba.adapter.servlet.ServletAdapter.init(ServletAdapter.java:153)
     at org.chiba.adapter.servlet.ChibaServlet.doGet(ChibaServlet.java:303)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
     at org.chiba.xml.xforms.Instance.iterateModelItems(Unknown Source)
     at org.chiba.xml.xforms.Bind.initializeModelItems(Unknown Source)
     at org.chiba.xml.xforms.Bind.init(Unknown Source)
     at org.chiba.xml.xforms.Initializer.initializeBindElements(Unknown Source)
     at org.chiba.xml.xforms.Model.modelConstruct(Unknown Source)
     at org.chiba.xml.xforms.Model.performDefault(Unknown Source)
     at org.chiba.xml.xforms.XFormsDocument.performDefault(Unknown Source)
     at org.chiba.xml.xforms.XFormsDocument.dispatchEvent(Unknown Source)
     at org.apache.xerces.dom.NodeImpl.dispatchEvent(Unknown Source)
     ... 18 more

Airplay no longer working with 3rd party after upgrading to Maverick.

I updated my MacBook Pro this week and I have noticed that the airplay icon is no longer showing up in iTunes to connect to my Denon Amplifier. The interesting thing is that my old iPad 1 that I have that is still running 5.1.1 can connect and play to the receiver just fine.
Was there an update to the airplay software that would affect 3rd party devices? I was not able to find any new updates for my receiver.

I woke up this morning with the same problem (all was fine last night). Only way to get all my mailbox folders back was to use Time Machine while in Mail, choosing the backup file from previous night and selecting EACH MAILBOX to restore (23 for me). All appears okay so far today (except some of my accessories in the menu bar are gone).
I sure hope an update comes SOON. In anticipation of Mavericks and the new MAIL I switched from Outlook 2011 3 weeks ago transfering 17,000+ files and would hate to back

Credit Memo process in 3rd party order

Hello All,
Once 3rd party invoice is completed process as follows: (standard process)
sale order --> Purchase Requisition --> Purchase Order --> Goods Receipt --> Invoice Verification --> Customer Invoice.
When you post the customer invoice to accounting, in general system will update
1.Net Value 2. COGS (Cost of goods sold) 3. Sales Qty.
Now the scenario is when the vendor cancel his original invoice and reissue the invoice (due to change in price / change in stock item and so on..),
We have to cancel the customer invoice and issue credit memo invoice (without any reference) for the customer.
But the problem here is.. when we post the credit invoice to accounting, COGS will not be updated (currently they are adjusting COGS value manually).
How can we map this scenario ? while creating credit memo invoice we should consider some reference so that COGS should be updated.

Hello Suresh,
THERE ARE TWO SCENARIOS HERE.
Scenario is when the vendor cancel his original invoice and reissue the invoice (due to change in price / change in stock item and so on..),We have to cancel the customer invoice and issue credit memo invoice (without any reference) for the customer.
> IF THE VENDOR GRANTS YOU A CREDIT MEMO ON THE QUANTITY OR VALUE BASIS, YOU CAN DIRECTLY PASS ON THIS TO CUSTOMER BY RAISING CREDIT MEMO (THIRD PARTY CREDIT MEMO IS G2S), THIS WORKS WITH ITEM CATEGORY 'TASG' (THIRD PARTY CREDIT MEMO ITEM). THE SALES RELEVANT INDICATOR ' F' IS SET IN CUSTOMISING FOR SALES FOR THIS ITEM CATEGORY. THIS MEANS THAT THE COST IS NOT CREATED.
--->IF THE VENDOR CALCULATES ADDITIONAL COSTS FOR YOU ONCE THE THIRD PARTY BUSINESS TRANSACTIONS HAVE ALREADY BEEN BILLED. THE COSTS FROM THE INVOICE RECEIPT ARE THEN CORRECTED IN THE CUSTOMER BILLING DOCUMENT WHICH HAVE ALREADY BEEN CREATED. SUBSEQUENT DEBITS FROM THE INVOICE RECEIPTS ARE COPIED TO PROFITABILITY ANALYSIS AS A DIFFERENCE AMOUNT. THIS MEANS THAT THE COST IS UPDATED HERE ALSO. IN ACCRUED PROFITABILITY ANALYSIS, THE COSTS ARE NOT COPIED FROM THE INVOICE RECEIPT, BUT FROM THE CUSTOMER BILLING DOCUMENT.
EXAMPLE:In the context of a third-party business transaction, you create a sales order for over 100 pieces.
A purchase requisition and a purchase order are generated. Ten pieces are delivered to the customer, and a billing document is then sent to the customer when the 10 pieces are delivered. The vendor sets a subsequent debit of 100 USD for shipping costs in the invoice. The cost is nowupdated in the billing document created, and in the profitability analysis (in this case, it is raised
by 100 USD).

3rd party signature handler set in Adobe Acrobat 9 Professional Extended gets reset

Hi All,
I have got a 3rd party digital signature creating plug-in i.e. MySign . I have set it inside 'Preference > Security > Advanced Preferences > Creation > Default Method to Use when Signing and Encrypting Documents' > MySign. If I restart Adobe Acrobat that setting is lost and the Adobe Default Security handler is then used.
I don't want to set handler manually every time I restart Adobe Acrobat. I have figured out that Adobe Acrobat is creating a registry entry named aPrivKey against that inside cHandlers BUT it gets removed on Adobe restart if I set MySign as the handler in the first place.
Similarly I want the same handler to verify signatures. For that I have set 'Preferences > Security > Advanced Preferences > Verification > Always use the default method (overrides the document-specified method)' along with the name of handler i.e MySign but on restart of Adobe, this is also gets reset.
Any idea how to set my handler as default to sign & verify without getting it reset?
Regards,
Wahaj

Hi All,
I checked with Adobe X and this issue is not present there.
Regards,
Wahaj

Adobe Muse form with 3rd party host is not working

I have uploaded a form with Adobe Muse to a 3rd party host. Upon testing the link scripts/form_check.php, I see 3 green checkmarks. Upon testing the form, the form appears to submit successfully, however I never receive the email.
I checked with the hosting company and this is what they said:
...this form is using localhost smtp of webserver which was stopped due to spamming issues...actually, localhost doesn't have proper rDNS record and the return path for all mails is the server itself, so whenever a client uses its domain for spamming the server's mail queue gets choked and creates issues for others. So we generally do not open localhost smtp and recommend users to use proper SMTP Authentication so that each mail will be delivered and won't create issues for server even if someone does spamming because in that case all mails will bounce back to the mailbox. So, we recommend you to use smtp authentication in the form and use proper smtp details to send mail.
Please provide a recommendation on what I should do to resolve this? Is there a way to modify the form so that it uses proper SMTP Authentication instead of Localhost?

Hi
Please refer to this document :
https://forums.adobe.com/docs/DOC-3581
Thanks,
Sanjit

Service desk integration with 3rd party tool

Hi all,
I've problems understanding the setup of connecting a 3rd party service desk tool with solman itsm.
So far it's clear that I need to activate and configure the service provider and consumer in soamanager.
The webservice then will be called by the 3rd party tool with corresponding data.
However, according to spro I need to define a value mapping for incoming/outgoing calls.
I do not understand this mapping... the WSDL of webservice ICT_SERVICE_DESK_API contains lots of fields, but in spro -> value mapping I can only define the following fields (which are hard coded in type pool AIICT):
SAPCategory
SAPComponent
SAPDatabase
SAPFrontend
SAPIncidentID
SAPIncidentStatus
SAPInstNo
SAPOperatingSystem
SAPSoftwareComponent
SAPSoftwareComponentPatch
SAPSoftwareComponentRelease
SAPSubject
SAPSystemClient
SAPSystemID
SAPSystemType
SAPUserStatus
What about attachments, priority etc.?
Will the interface parameters mapped to these ones?
For what purpose do I need to maintain the value mapping?
Can you give me a hint?
Regards, Richard Pietsch

can you please check the WIKI Solution manager Service Desk Integration with third party service desk - SAP Solution Manager - Security and Authorizat…

Using 3rd party binary in script that is run as job

Hi all,
I have several scripts to do various tasks with IIS logs we receive from all our various web servers. One script unzips logs, another logparses to grab a few fields then sftp to a 3rd party for analysis, another will encrypt the original zip files
in prep for ftp to 3rd party, another will ftp to that 3rd party, and yet another will analyse the logs with our in house analytiscs application.
I want to have a master script that will run these other scripts as jobs so that it will control when to start certain scripts based on the state of the jobs. It all seemed to work great as I was setting up test jobs, until I added '3rd' party executables
like 7-zip, ftp.exe, winscp, etc... The jobs would just go to failed state when they hit the executables.
That's not my current problem though as I found out that if I used the
-windowstyle hidden option for start-process then everything ran as expected, that is until I wanted to log output from the 3rd party app. FTP for example.
I tried this:
$ftpexe = "C:\windows\System32\ftp.exe"
$ftpscr="d:\scripts\ftpscrtmp.txt"
"open 111.1.1.1`r`nSomeFTPuser`r`nSomepassword <..bunch of other ftp commands>" | Out-File -FilePath $ftpscr -Append -Encoding "ASCII"
start-process -wait -filepath $ftpexe -argumentlist $ftparglist -RedirectStandardOutput $ftplog -windowstyle hidden
However, asking powershell to redirect output of a hidden window was probably like asking someone to cover their eyes and read a book and it let me know it.
I have tried without using -windowstyle hidden and not having any luck. I want to capture the output of the ftp commands so that I can make sure the file was transferred successfully. If I run the script without -windowstyle hidden and not as
a job it works, and I can test the output. I really want to be able to run this script as a job AND get the output of the ftp to a file... advice?
Thanks in advance!

This works with no problem for me.
Start-Process -wait -filepath ftp.exe -argumentlist '-s:c:\scripts\ftpcmd.txt' -RedirectStandardOutput c:\scripts\ftp.log
I get no window and the file gets written.
This is my ftp command file:
open ftp.microsoft.com
anonymous
[email protected]
ls
bye
¯\_(ツ)_/¯

3rd party chargers?

Similar Messages

Maybe you are looking for