3rd party CPU temp sensor??

Like others, my Neo2 is giving me wrong temp readings..
Everyone suggests an external temp sensor, but where do I buy one?

I don't think that you could put it right on the core itself, i could be wrong but i would put it right next to the core or right on the heatsink as close to the core as possible.
I remember when i used one of those thermal sensors on my abit VH-6, put it right on the Celeron CPU (coppermine core) and the temp for the cpu went right up up up! Reason being that the sensor was not allowing the core to touch the heatsink fully.
Just be careful not to sandwich it in between the core and the heatsink.

Similar Messages

Cpu temp sensor burned

Hello all,
K7T 6330 V.3 with 1.3 Athlon
I recently changed my HSF to a presumably better unit than the one that came with teh CPU.
It ended up not cooling any better but running a bit hotter.
I removed all of the components I no longer used (old NIC, bad CDROM) to help air flow but after a few reboots to test the temp I smelt burning plastic.
I found that the CPU temp sensor inside the CPU socket was burned and now I only get red LEDs. The CPU and socket look fine. No debris of burn marks.
Anyway, if the sensor is burned to make an open circuit or shorted somehow, would this completely kill the mobo?
I mean, if ONLY the temp sensor circuit was fried, would this prevent the entire board from functioning?
thanks,
js

Yeah. Sorry if I wasn't clear on that part. The CPU definitely scorched the sensor. I may have inadvertantly pulled it up a little when replacing the CPU, only way it could have happened.
thanks,
js

Neo2 cpu temp sensor

I just flashed to bios 1.A4 and now when I use corecenter or speed fan it shows the cpu temp to be 123C which I know isn't correct. Any ideas what is up with that? Also when using mbm which board is closest on the config to this board?

The problem is most likely that corecenter is reading a false sensor. This can be caused by if you have recently run a different type of temp monitoring program such as motherboard monitor, which allows you to select which sensor you want to use. You might try installing that and selecting the correct sensor, this will put the correct sensor reading in MSI Core Center also. Since this post is older I'm not sure if you still have the problem, but either way hopefully this help...

CPU temp sensors?

I´ve got a MSI 6330v5 motherboard, but it seems like, there´s no sensors for system temp. or cpu temp.
It measures my fans, and voltage fine. So there is a HW monitor, but no temp. sensors. Is it possible to add these sensors to the MB, or am I just f..... in that way?
/Rasmus

FINALLY i'm back here at MSI!
i got a new HD from WD!
Got a new clean win xp pro, so i'm happy to be here again!
hi man,
go here http://mbm.livewiredev.com/
on the left side of the page you see the link 'motherboard list'. This site is made for users who runs motherboard monitor 5.
once you see your motherboard you will see the main sensor chip and the case and cpu sensors of your board.
there are 3x ms-6330 on the list, so attention is NEEDED before determining the sensor chips!!
i hope you will like that page and the software they provide.
Takki

990fxa gd80 cpu temp sensor?

My motherboard bios says my resting cpu temp (8350) is about 50 deg C. My Windows program Speccy (by piriform) show the resting temp about 27 Deg C.
Which one do I believe?????
If it is truly 27 deg C I will leave the stock cooler in. But if it is 50 I may get a bigger CPU cool.
Help?

I tried some other programs to read the temperature of the CPU. They all read the same...different from the MB. Much cooler.
I like the MSI board ok. But their documentations and support, and bios screens, all stink. The asus and asrock boards all have much better everything, except support. I have never found manufacturer support of MBs any good except for "we know nothing about it, but we will replace it".
But this forum is pretty good. Better than nothing.
Thanks for the reply!

MOVED: CPU temp sensor hitting 255C during stress test

This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=155824.0

Quote from: Bas on 12-January-12, 16:02:07
I doubt TMPIN0 is connected to anything, ergo your program is reading nothing.
If something was 255C then you would see flames comming out of the system.
Exactly, and the heatsink is cool to the touch and the fans slow down.
255 is simply the maximum value of 1 byte - a value that goes from 1 to 256 or in this case, 0 to 255. For some reason the sensor seems to bug out and report a value as high as it can report.

P6N Sli Platinum front audio panel and CPU temp voltage issues

Hi All,
I got my P6N Sli Platinum yesterday, build up my computer without any major issues. However I have noticed that my audio front panel does not work. It could not detect my microphone when i plug it into front auido panel, it works fine for the rear auido panel though.
Another issues is I highly doubt the accuracy of CPU temp sensor. Msi 's software monitor reports my CPU temp is around 19-20 degree, I know that's too good to be true even I am using a water cooling system. Btw my cpu is E6600. Anyone else has the similar issues?
The third, I notice my CPU voltage is bouncing between 1.1 to 1.24 in CPU-z. And the multiplier is changing from 6 to 9, frequency is changing from 1.6g to 2.4g. I only see this in CPU-z. Msi 's own software reports CPU running at 2.4g though. Is this cpuz issue or something else?
Finally, any tips to max the overclock potential of this board? I have overclocked to 3.1g but there are some crashes. Going higher the board just won't boot up. I read a review on anandtech.com says 1.22 bios is good for oc. Where can i download that? I only found 1.1 bios on official site.
Any reply will be appreciated.
Cheers

Quote
Another issues is I highly doubt the accuracy of CPU temp sensor. Msi 's software monitor reports my CPU temp is around 19-20 degree, I know that's too good to be true even I am using a water cooling system. Btw my cpu is E6600. Anyone else has the similar issues?
C2D-CPUs have a digital internal sensor to monitor CPU Core temperatures. Have a look at those with Core Temp ( http://www.thecoolest.zerobrains.com/CoreTemp/ ). This Tool reads the temperature data directly from the register of your CPU. There is nothing wrong with the sensor. It is rather the MSI tool that does not read the data it provides correctly.
Quote
The third, I notice my CPU voltage is bouncing between 1.1 to 1.24 in CPU-z. And the multiplier is changing from 6 to 9, frequency is changing from 1.6g to 2.4g. I only see this in CPU-z. Msi 's own software reports CPU running at 2.4g though. Is this cpuz issue or something else?
There is no issue. What CPU-Z allows you to see there is the C1E-feature of your CPU at work. When there is nothing to do your processor will automatically reduce Core Voltages and frequency to save power and keep temperatures down. As soon as the work load increases the multiplier is set back to x9 and core voltages increase dynamically. It is meant to be a good thing.
I have overclocked my system a little and I like that the C1E feature is still working at this speed setting CPU frequency to 2GHz and core voltage to 1.144v when my system is idle.
If you have problems with this feature you can turn it off in BIOS. The option is labeled as "C1E Support" and might be hidden somewhere. You may be able to hit "F4" to unhide it.
The MSI utilities are not the best tools to monitor your system. CPU-Z, Core Temp, Everest, Speedfan, Memset, Rightmark Memory Analyzer for example do a far better job.

Pointing IPS/IDS sensors to a 3rd party

Hey guys, this is probably a simple question but for some reason I can't find a simple answer.
I'm testing out a Juniper STRM 2500 box and need to point my 4 IDS/IPS sensors to it so it can collect the data and so on. Is there a command to forward events onto the 3rd party device or do I simply set the logging (syslog type) to send to the juniper box.
Thanks in advance.

The sensor is an SDEE server, configure the sensor to allow the STRM's IP address and give the sensor login/password to your STRM box and let STRM connect to the sensor.
The STRM box will have to request the event data from the sensor.

Can any 3rd party sensors be used with this system?

I have several wireless door sensors currently in use with my ADT system that I plan to cancel soon. Is there a way to use these with the gateway?
Can any 3rd party IP camera be used with the gateway, or only the ones provided on your site?
Supported or not, just wondering if theses items will work. Thanx ~

Zwave is a Propiertary standard protocol.
Both ADT And Verizon are offering us off the shelf zwave devices.
So we "should" have been able to use any zwave devices.
But no...
it appears that Verizon has decided to lock out anything they haven't sold us directly
(lock out from their gateway).

No automation on 3rd party plugs, and they only address 1 cpu?

Hey guys,
A user had posted an alarming message on a previous post, and I thought I'd address it in it's own post.
He basically stated that some major 3rd party plugs, namely Native Instruments and "many other software instrument manufacturers" can only address one CPU in the new Mac Pros, and that in Logic 8 you can no longer automate these 3rd party instruments. We do a LOT of automating in 7 here, on Kontakt, many others, and that would definitely prevent me from doing the change over any time soon. I'm sure they'll fix it at some point, but can anyone confirm that this is true? Thanks homies.
Tyler

Well, one of the mentioned rumours is true. E.g. Kontakt 3 obviously doesn't use more than one CPU at a time - even with the "Multiprocessor Support" option enabled.
Concerning the Automation everything works fine as always here with NI Kontakt 2/3 and Reaktor.

Error msg is generated when attempt to crop a TIF that included a 3rd party filter (Win7 Pro SP1)

Error msg is generated when attempt to crop a TIF that included a 3rd party filter not on
local machine. (Windows 7 Professional SP1)
1. File created in CS5 with third party filter applied to smart object (filter:Neat Image
published by ABSoft.)
2 Transfer to another computer that does not have the filter installed.
3. Open in Photoshop CS6.
4. Use crop tool to attempt to crop the photo.
5. Receive error message "Could not complete the command because of a program
error."
6. Crop completes and can be saved, but filter is disabled and cannot be enabled unless
moved back to original computer.
Expected result should be:
Allow filter to be enabled as CS5. Or message similar to message produced with
missing font.
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer,
SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 1995 MHz
Built-in memory: 6051 MB
Free memory: 2949 MB
Memory available to Photoshop: 5290 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GT 540M/PCI/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
Video Card Number: 1
Video Card: NVIDIA GeForce GT 540M
OpenCL Unavailable
Driver Version: 8.17.12.6744
Driver Date: 20110301000000.000000-000
Video Card Driver:
nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode:
Video Card Caption: NVIDIA GeForce GT 540M
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\wayne\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 450.2G, 387.4G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64
Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1642
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   5,0,10,0
   AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012
18:00:00)   1.000000
   ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
   BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build
gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build
gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0;
BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112
0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.0
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Embed Watermark 4.0
   Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Extrude 13.0
   FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Mezzotint 13.0
   Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Pinch 13.0
   Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0
   Shear 13.0
   Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Sumi-e 13.0
   Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

See if you can troubleshoot Safari extensions and third party plugins before Safari crashes.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.

Z87-G45 CPU Fan Sensor Malfunction

Seems like pretty much a non issue but none the less I want to figure this out. When monitoring fan speeds on the MSI Z87-G45 Gaming motherboard it keeps reading zero, then returns to a normal level, then reads 0. I noted this even in the motherboards on utility accessed before allowing windows to load and again using a 3rd party monitoring program. I'm going to assume its a faulty sensor but I'm just not sure. Anyone have any ideas?

Quote from: badboy2k on 19-July-14, 14:08:55
the stock coolers with Processors suck and are only meant as basic cooling (if there under load they get very hot and the fan spins at 100% which on them sounds like a jet engine) i too would change that for a good after-market one!
My I5-4590 hovers around 30C idle, and stays under 60C under gaming loads with the stock cooler ... even with more CPU intensive games, so, they do work well if everything is working correctly..... possible that his CPU fan is getting ready to fail.

K9N-Platinum wrong cpu temp + nforce drivers problem

I have a msi k9n-platinum (ms-7250)
Cpu : Amd 64 x2 3800+
4 * 512 ddr II 533 samsung
Asus 7900 GT
6 x maxtor sata hd's
Power : hyper type-r 580 watts
pioneer 110d
lg combo cdrw-dvd
When i builded the system , i installed Windows XP + Sp2 , made all windows updates
After i tryed to install the drivers a got wit the cd.
My system was very instable (i had no problem whit the motherboard i had before)
I made the install more than once , but still got instability
So i went to the nvidia site and downloaded the drivers for the chipset from there , and also made a bios update to v 1.2
System went stable.
Tried again after the bios update with the original cd --> not stable , randomless reboot
so i'm now working with the nvidia drivers from the nvidia site , it's stable but when i go to bios i see that the CPU temp is -38°
Is it a fix for this or do i have a wrong mobo ????

-38°C , seen that a few times now .
I think you should RMA/return the motherboard .
Why , see:
https://forum-en.msi.com/index.php?topic=99547.0
https://forum-en.msi.com/index.php?topic=99573.0
https://forum-en.msi.com/index.php?topic=94762.0
Not the same board as yours but all have a faulty calibraded (non workin) sensor on their motherboards .
The positive thing though is that the boards with this issue that runs on AMI bios doesn't freeze/halt as the award based ones does.

Is there a 3rd Party Solution for Adobe's lack of recover for unsaved work?

Time and time again I am baffled by Adobe's inability or refusal to make the user experience consistent across it's entire Creative Suite.
I am repeatedly shocked by the punitive error messages I receive in Photoshop. It's as though you don't really care what the user wants, I mean what are we going to do, use MS Paint? So you are at liberty to provide such classic errors as "Unable to complete your request because of a program error" instead of "wait, did you mean apply that filter to the only visible layer that you had selected just seconds before and never requested that the layer be de-selected?" I could go on and on with the crazy and convoluted exceptions to logic in Photoshop, but I would rather just understand why, when you know that a problem exists and affects 90% of your users at some point, why wouldn't you try to build in some form of recovery when your program crashes
Why should I be punished for relying on your program not to crash when I am working on something? I have repeatedly been advised that the best solution is to save often. Sometimes that's not an option and why should it be my responsibility to compensate for your buggy program?
After 20 years of development, you can't figure out how to recover someone's work if they haven't been able to save for some reason and Phtooshop crashes? I have been using Photoshop since Version 3 (for sure, but more likely version 2) and back then you could rename your temp files and recover the work you hadn't saved. I understand that the mechanism by which fast previews (comps) of your work are displayed but not applied (like Live Image), but why isn't it possible to store a simple text file that could retrace my steps if your program crashes?
This is a real problem if you are processing a filter that takes 30 minutes and Photoshop waits until 29 minutes and 59 seconds to announce that it stopped working. Granted you can see your document in the background, but you can't save it? You can't commit whatever is in RAM for the undo states to disk? You can't have your program quickly save a new text file with the list of commands applied between saves? You can't do anything? After 20 years?
Microsoft includes recovery in Word, Excel, etc. Even SOME Adobe programs do it: InDesign...AfterEffects. Why doesn't your flagship program do it?
It's frustrating beyond belief and it baffles me that Adobe is celebrating the 20th anniversary of Photoshop and yet this basic, basic customer need is still not effectively addressed and furthermore, any question about it is answered with indignant indifference:
it doesn't work and we don't care what you want,
think you'd be happier with our competition....
oh wait, we don't really have any competition...
maybe you should save more often...
Is there a 3rd party solution that will allow me to recover my work in Photoshop when it crashes between saves? Or am I just stuck having to cope with rebuilding my work because Adobe refuses to provide a solution.
(let the backlash begin as I try to simulate my lens blur using MS Paint....not gonna happen)
Jase

Go to google and search for keyboard recording software. That will record all of your keystrokes.
CS4 running under windows 7 appearently has some problems. While it would be nice if Adobe went back and rewrote there software for an operating system that was in early development when CS4 was released, it is not likely to happen.
Excuse me, they did it is called Adobe Photoshop CS5 and is due to be release soon.
If, If you would stop ranting for a minute, and quit feeling like you are being slammed, and possibly listen for a minute.
I am currently running Windows Vista Home Premium "not my choice" on a Toshiba A215-S4747 with 3gb ram. When I bought this laptop the Toshiba Rep was at the Best Buy and I spoke with him about this very computer. I did not want to run Windows Vista, period, I had heard to many bad reports about it. The Toshiba Rep told me that was not a problem and this computer would run Windows XP Professional just fine.
So I bought this computer and 2gb of ram as it only came with 512mb. I went home happly and proceeded to install Windows XP Pro and the new memory. Guess what?
this computer will in fact run Windows XP Pro just fine as long as you take into consideration that there are almost no hardware drivers for the periferals that make up this computer.
So I reinstall Windows Vista and for the next year I am tied into fits because of system crashes. Finally I am at the point that I am going to take this computer to the Toshiba Office in Torrance California and personally give it back to them "I was going to throw it through the front office window.".
Just before I ran across memtest and I downloaded it and tested my memory. You got it I had a defective ram chip.
Best Buy replaced the chip no problem. that was in November of 2008. I do horrible things to this computer, I really can drive it. It has not crashed once since I found and fixed the problem.
No one is suggesting that you are an idiot! or inexperienced. but no matter what you do remember 2 very simple rules.
If you run into a problem 1. "Go Back To Basics" and 2. "KISS ie: keep it simple stupid" if you do this and I am speaking from my own experience you will find like and work a lot simpler and more pleasent.

Has anyone tried a 3rd party laptop cooling pad?

I have had my macbookpro 2.16 for about 2 1/2 weeks now, temp averages at about 40c during what i normally do, but the base of it is still too hot to comfortablly use on my lap. I have been using a large book as a buffer for the heat, recently I saw some 3rd party cooling pads with fans in them, running of USB power, has anyone tried one?

I use Vantec Lapcool 4. It folds and quite small for transporting (fits nicely into my bag). It uses 2 fans powered either by USB or by AC. Also adds 4 USB ports.
It makes about 10C defference. Since it keeps the case cooler and MBP doesn't build up heat like it used to, so works quite well.
The only con I've found is that the MBP slips a bit on the pad so I bought a package of small, clear, self-adhiesive, non-slip rubber cushions to put on the bottom of the lappad (~$2@Home Depot). Now MBP sits securely without any slippage.
Mac OS X (10.4.6)

3rd party CPU temp sensor??

Similar Messages

Maybe you are looking for