3rd party dropshipment carried out by more than one 3rd party vendor

Hi
I am wondering if the following is possible in standard SAP on a third party drop shipment scenario..
I would like 1200pcs quantity to split up into 3 different shipments (each shipment = 400pcs) and drop ship by three different 3rd party vendors (ie. Vendor A, B, C).
Is this possible in standard SAP?
In another word, if the standard SAP is able to carried out this business in the system, will the three PO being able to be tracked by the SO?
If it is possible, how do I perform this in the SAP system via ME57?
Thanks
YY

Hi Yong Yeow Ching
Yes, it is possible but you need to have 3 PIR's with each vendor and also need to have 3 lines in Source list but w/o any tick for fixed vendor. Here are the steps:
Create TAS Sales order 1200 Qty--> It will create a Preq with 1200 Qty and delivery address of customer>When Buyer will convert that PReq to PO using ME57 system will give you a pop up message showing all the three vendors , buyer needs to select one supplier and change the qty accordngly in PO-> same steps needs to repeated 3 times using same Preq.
Regards
Yogesh

Similar Messages

How can i find out the more than one times occurance of integer in a array?

How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Please some one help me as sson as possible. thanks in advance....

Kumar_Mohan wrote:
How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Sort the array. Then loop through it and compare each i-th element with the (i+1)-th element.
Please some one help me as sson as possible. thanks in advance....In future postings, please refrain from telling that it is urgent, or you need help ASAP. It is rather rude to do so.

Ordering more than one material from Vendor in a group or packs.

Hi All,
We are into Apparel business and we have a business scenario in PTO (Purchase to Order) ,, where the customer places order for more than one finish product in a packed condition - means more than one material to be packed as a single PACK and to be delivered to him.
We take the order and transfer the order to our vendor who will directly delivers it to customer.
My requirement is - is there a method in the PO where we can mention to the vendor that item 1 & 2 as single pack , 4 & 5 in a seperate pack , we do not want to mention to the vendor in the header text or item text.
Can some one provide me a solution.
Thanks,
Vengal Rao.

Hi,
You please create IDOC for this additional information and sent it to him. There is a alternative way to in clude in footer text of document by changing in the smart form. But every time mentioning like this is not recommendable and looks not nice. Footer text generally ment for address. I hope this will resolve your issue. Thanking you.

Cannot open more than one window with Firefox

I've been having this problem for a couple of weeks, now, and I've run out of ways to try and fix this.
One day, after starting my computer up, I opened Firefox. No big deal, everything looks fine, tabs are working, etc. Then, when I went to open a second window, nothing. The first window still works fine, I can open tab upon tab, but it just won't open any more windows.
As much as I'm a fan of the browser tabs, I still prefer to have them spread out over more than one window.
I've read through a ton of different troubleshooting walkthroughs and whatnot, reinstalled three or four times, restored settings, but nothing works.
Well, not entirely, I guess. Here's the part that I can't quite figure out. When I disable every single addon, Firefox works just fine. I've done the checking down the list, trying to single one out, but it's *any* addon. Even something as simple as a dictionary search ([https://addons.mozilla.org/en-US/firefox/addon/68/]) causes this to happen.
I've checked with an older computer with an older version of Firefox, and it still seems to work fine with addons enabled, so I'm wondering if this is an update issue?
Would reverting back to a previous version of Firefox solve this, and if so, where would I be able to find downloads for a previous version?
So, like I said, I'm at a bit of a loss here. Sort of at a crossroads for trying to figure out what to try next, so I'm hoping someone a bit more knowledgeable can help steer me in a direction.
Edit: I just noticed that the posting includes system information with my question. I should clarify that I'm posting this from an older computer with an older version of Firefox. On the computer that I'm having this issue with, I'm using the newest version of Firefox (3.6.8).

Some old posts indicate the following add-ons have caused the problem of not being able to open a new window in Firefox in the past. If you have any of them you might want to disable or uninstall them to see if that is causing your problem. 
* HP Smart Web Printing Toolbar
** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=531462&forumId=1
* Skype
** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=472881&forumId=1
** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=531462&forumId=1
* Zone Alarm Toolbar
** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=472881&forumId=1
** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=624545&forumId=1
** http://forums.zonelabs.com/showthread.php?t=73592&highlight=firefox+window
 
You need to update your plug-ins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
* Shockwave Flash 10.0 r32
* Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
#* Removing old versions: http://www.java.com/en/download
 
You are using an out-of-date version of Firefox. Unless you have a reason for using that old version, you might want to consider upgrading.
*The Firefox version series 3.0.x is no longer being supported or updated, even for security issues.
*The last version in the 3.0.x series was 3.0.19 which was released 03/15/2010.
*You are using version 3.0.13 which was released 07/31/2009.
Consider upgrading to the current version, Firefox 3.6.8. Firefox 3.6.9 is scheduled to be released in a few days and the new Firefox 4 will be released later this year or early next year.
* See: https://support.mozilla.com/en-US/kb/Upgrading+to+Firefox+3.6
* Or you can download the full installer and save it to your hard drive for installation from: http://www.mozilla.com/en-US/firefox/all.html
* Also see: http://support.mozilla.com/en-US/kb/Installing+Firefox

Text more than one person at one time????

I was wondering if you can send a text out to more than one person at a time. I can't seem to add more than one person to a text like you can on e-mails. If you can't this feature should be updated. I'm sick of typing things over and over to send to other people. Any thoughts???

Dubes
Sorry, that's not available yet
Head off to;
http://www.apple.com/feedback/iphone.html
and make a request
*Thanks for the correction b_behringer*

Can i take the printout for more than one billing document in SD at a time

HI ALL,
The issue is '' i want to take the print out for more than one SD - billing document at a time.
is there any config settings to be done.
please guide me if u have the solution ASAP.
Regards,
SOMU.

Yes, it is possible. However you may have to enable a field NAST-ANZAL. This field is available in VV31 when you are maintaining the output records. The field Number of Messages can be filled with the numberof copies youwant.
However, I think you have to read this in your custom program to trigger n number of copies. If that is done, you can take the printouts as many times as you want in a single trigger.
The code approx looks like this
IF nast-anzal EQ 0.
nast_anzal = 1.
ELSE.
nast_anzal = nast-anzal.
ENDIF.
nast-anzal = 1.
nast-dsnam = nast-kschl.
nast-dsuf2 = vbdkr-vbeln.
DO nast_anzal TIMES
If you show this field and talk to your developer, he should be able to help you.
Hope this helps.

IMac (2008) OS10.6.8 - Main menu freezes when running more than one application at a time. Apple and 3rd party applications - all freeze the main menu. Safe mode seems to work OK. Tried repairing permissions - didn't work.

For the past 60 days I've experienced Main Menu freeze when running more than one application at a time. iPhoto, Preview, Text Edit, Epson Scan, Firefox and Thunderbird are the apps I use almost daily. No matter what I do, when more than one is running they will freeze the Main Menu (top of the screen). I've tried booting is Safe Mode and I don't seem to have a problem. I've tried several suggestions from repairing permission (DiskUtility) to eliminating specifis login items. Nothing works. I've posted this issue on the Apple forum several times and no one else has experienced this problem. I hesitate to take my iMac to the Apple Store or a private Apple repair service until I've exhausted all of my options. Do I have any more options?

Question: Everytime an app crashes I have the option to report it to Apple - which I usually do. But I've NEVER reported a Main Menu freeze because it never asks me to
There's really no need to submit to Apple, it's just a round file cabinet on the other end, especially with 10.6 or earlier.
This sure sounds like a resource problem...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?

Re: Pricing for more than one ship-to-party in sales order

Hi Gurus,
Currently I am facing a problem regarding pricing the shipping charge for a sales order having more than one ship-to parties in it.
Our business process is having a pricing condition type which calculates the shipping charge based on the total value of the order.
The technical details of the condition type are as follows:
ZSHH
Cond. class =    A Discount or surcharge                  Plus/minus = A Positive
Calculat.type = B Fixed amount
"Group cond" & "RoundDiffComp" are "checked"
GrpCond.routine 1 Overall Document
Scale basis = value
Now due to this depending on the entire order value the shipping cost is calculated.
However when there are 2 ship-to-party the system should group the items to be shipped to each ship-2-party and calculate the prices accordingly.
Now as the "GrpCond.routine 1 Overall Document" -- it is taking the total order value while calculating the shipping price even if there are 2 ship2party in the sales order. I am just wondering how to go about this situation.
There is no value in the pricing formula that calculates the price based on ship-2-party.
Can anyone help me with this?
Does this mean that I have to create a new scale formula in VOFM?
Also how is the shipping price charged when the customer requests partial deliveries?
Thanks in advance
Vinit

Vinit,
   You need to create a new GrpCond.routine. You can do this in VOFM-> Formulas -> Structure of group key. You will need to have the carrier available in the communication structure komp. So assuming you do this, create a formula like 050(RV65A050). Enter code that would look like(I am assuming your carrier code is 10 in length):
FORM FRM_GRUPPENKEY_050.
xvakey      = '050'.
Xvakey+3(10) = komp-carrier.
ENDFORM.
Then assign 50 to the condition type(v/06) as the new GrpCond routine. This should give you your desired results.
Partial deliveries will only take the portion of delivery charges shipped from the line. Eg if 10$ freight on the line and 1 of 2 is shipped, you will only see 5$ on that invoice as long as your pricing rule is copy unchanged.
Edited by: Matthew Menzies on Jan 21, 2009 11:26 PM

HT6154 Can someone please just help me figure out how to update this stupid phone without losing anything? I somehow have more than one Apple ID on this,but I just want my music and my pictures to stay and I'm terrified of losing these things.

Can someone please just help me figure out how to update this stupid phone(iPhone 4)without losing anything? I somehow have more than one Apple ID on this,but I just want my music and my pictures to stay and I'm terrified of losing these things. I have a lot of music from old CDs on here,and for some reason I can't even transfer them manually onto my computer. I'm not tech savvy whatsoever. Someone please help,having my music is the the whole reason I still have this phone.

First read about back http://support.apple.com/kb/ht1766
Then read on how to transfer photos to your computer http://support.apple.com/kb/ts3195
Then
UPDATING iOS
Over the air updating of iOS needs iOS 5 or later so unless you have iOS 5 or later you will not see updating in setting
The following link explains how to update http://support.apple.com/kb/HT4972
This link explains how to update using wireless http://support.apple.com/kb/HT4623
This explains how to transfer purchases to your computer http://support.apple.com/kb/ht1848

I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

I have an HP Photosmart C4180 all-in-one, printer, scanner and copier. I can't figure out how to scan more than one page? It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement. Any ideas??
Thank you, Jetteski

Hello Jetteski,
Hello Jetteski, Thanks for the post.
Since you are running a MAC, check the below links for some excellent information on scanning. Good Luck!
http://goo.gl/M8Cl2
http://goo.gl/cufK6
http://goo.gl/OTQoR
I work for HP but my posts and replies are my own....Thank you!

Just bot a macbook pro to replace one of my pc's. can't figure out how to have more than one website open at a time like explorer. Is it possible to do?

I can't figure out how to open more than one website at a time like explorer does on a pc. would like to know if it Is possible or not.

Tabbed browsing is the way. Go to Safari's View menu:
and click "Show Tab Bar." When you see a link on another site you wish to open without closing the first site, simply right-click and select "Open Link in New Tab."

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards

Oracle OUTER JOIN on more than one table

Hi!
Friends, please help with this urgent problem: How can an outer join be written on more than one table?
An SQL Server query:
SELECT * from a INNER JOIN b on a.id = b.id LEFT OUTER JOIN c ON c.id = a.id AND c.id = b.id
works fine with SQL SERVER
But Oracle query:
SELECT * from a,b,c WHERE a.id = b.id AND a.id = c.id (+) AND b.id = c.id (+)
gives an error: OUTER JOIN cannot be used on more than one table? Why?
I use OracleDriver from classes12.zip to connect to Oracle8i database.
Please, help!

The Oracle 8i and later SQL reference reads that the following "join_types" are supported and under this syntax it does not limit the LEFT OUTER JOIN (syntax the same as SQLServer example in original note) to two tables as implied in these notes:
The join_type indicates the kind of join being performed:
Specify INNER to indicate explicitly that an inner join is being performed. This is the default.
Specify RIGHT to indicate a right outer join.
Specify LEFT to indicate a left outer join.
Specify FULL to indicate a full or two-sided outer join. In addition to the inner join, rows from both tables that have not been returned in the result of the inner join will be preserved and extended with nulls.
You can specify the optional OUTER keyword following RIGHT, LEFT, or FULL to explicitly clarify that an outer join is being performed.

How to find out which sub query returns more than one row

Hi all,
Can any one give me clue ,how to find out which sub query returns more than one row in the following query .
/* Formatted on 2011/05/17 19:22 (Formatter Plus v4.8.8) */
SELECT a.*, ROWNUM AS rnm
FROM (SELECT DISTINCT '1' AS "Page View", ou.org_unit_name AS "Org",
 prxm.mbr_idntfr AS "Beneficiary ID",
 md.last_name
 || ', '
 || md.first_name AS "Beneficiary Name",
 pci.idntfr AS "Tracking No.",
 TO_CHAR (TRUNC (req.pa_rqst_date),
 'MM/dd/yyyy'
 ) AS "Request Date",
 sts.status_name AS "Status",
 req.pa_rqst_sid AS "Request #",
 prxm.mbr_sid AS "Mbr_sid",
 TO_CHAR
 (TRUNC (req.pa_revision_date),
 'MM/dd/yyyy'
 ) AS "Last Updated",
 TO_CHAR (psd.TO_DATE, 'MM/dd/yyyy') AS "TO_DATE",
 prxpl.prvdr_lctn_iid AS "PRVDR_LCTN_IID",
 pd.prvdr_sid AS "PRVDR_SID", 'Y' AS "State View",
 DECODE
 ((SELECT DISTINCT pd.national_prvdr_idntfr
 FROM pa_request_x_provider_location prxplo
 WHERE prxplo.pa_rqst_sid =
 req.pa_rqst_sid
 AND prxplo.oprtnl_flag = 'A'
 AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
 0, (SELECT prxplo.prvdr_lctn_idntfr
 FROM pa_request_x_provider_location prxplo
 WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
 AND prxplo.oprtnl_flag = 'A'
 AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
 NULL, (SELECT prxplo.prvdr_lctn_idntfr
 FROM pa_request_x_provider_location prxplo
 WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
 AND prxplo.oprtnl_flag = 'A'
 AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
 (SELECT DISTINCT pd.national_prvdr_idntfr
 FROM pa_request_x_provider_location prxplo
 WHERE prxplo.pa_rqst_sid =
 req.pa_rqst_sid
 AND prxplo.oprtnl_flag = 'A'
 AND prxplo.pa_prvdr_type_lkpcd = 'RR')
 ) AS "NPI/ID",
 DECODE
 ((SELECT pd.org_bsns_name
 FROM pa_request_x_provider_location prxplo
 WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
 AND prxplo.oprtnl_flag = 'A'
 AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
 NULL, (SELECT pd.last_name
 || ', '
 || pd.first_name
 || ' '
 || pd.middle_name
 FROM pa_request_x_provider_location prxplo
 WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
 AND prxplo.oprtnl_flag = 'A'
 AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
 (SELECT pd.org_bsns_name
 FROM pa_request_x_provider_location prxplo
 WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
 AND prxplo.oprtnl_flag = 'A'
 AND prxplo.pa_prvdr_type_lkpcd = 'RR')
 ) AS "Prvdr Name",
 TO_CHAR (psd.from_date,
 'MM/dd/yyyy'
 ) AS "Srvc From Date",
 TO_CHAR (req.validity_start_date,
 'MM/DD/YYYY'
 ) AS "Due Date",
 (fn_get_busniess_days (TRUNC (req.validity_start_date))
 ) AS "Days Left",
 req.pa_mode_type_lkpcd AS "Source",
 TO_CHAR (TRUNC (wmdtl.rtng_date),
 'MM/dd/yyyy'
 ) AS "Assigned On",
 NVL (wmdtl.assigned_to_user_name,
 'Not Assigned'
 ) AS "Assigned To",
 req.org_unit_sid AS "OrgUnitSid",
 TO_CHAR
 (wmdtl.modified_date,
 'MM/dd/yyyy hh24:mi:ss'
 ) AS "WTRD_MODIFIED_DATE",
 TO_CHAR (wmdtl.rtng_date,
 'MM/dd/yyyy'
 ) AS "WTRD_RTNG_DATE",
 req.status_cid AS "PA_STATUS_CID",
 TO_CHAR (req.modified_date,
 'MM/dd/yyyy'
 ) AS "PA_REQ_MODIFIED_DATE",
 prs.state_pa_srvc_type_code
 AS "STATE_PA_SRVC_TYPE_CODE",
 wmdtl.wm_pa_task_rtng_dtl_sid
 AS "WM_TASK_RTNG_DTL_SID",
 wmdtl.assigned_to_user_acct_sid
 AS "WTRD_Assigned_to_user_acct_sid",
 (fn_get_busniess_days (TRUNC (req.validity_start_date))
 ) AS "Days LeftSort",
 wmdtl.assigned_to_org_unit_sid
 AS "WTRD_Assigned_to_OrgUntSid",
 DECODE
 ((SELECT COUNT (*)
 FROM pa_request_status prs
 WHERE prs.pa_rqst_sid = req.pa_rqst_sid
 AND prs.status_cid = 5
 AND prs.oprtnl_flag = 'I'),
 0, 'N',
 'Y'
 ) AS "SHOW_UTILIZATION"
 FROM pa_request req,
 pa_certification_identifier pci,
 status sts,
 pa_request_x_member prxm,
 wm_pa_task_routing_detail wmdtl,
 pa_service_date psd,
 org_unit ou,
 pa_request_service prs,
 pa_request_x_provider_location prxpl,
 provider_location pl,
 provider_detail pd,
 provider p,
 mbr_dmgrphc md
 WHERE req.oprtnl_flag = 'A'
 AND req.status_cid NOT IN
 (20, 30, 70, 25, 80, 96, 85, 5, 97, 98, 101)
 AND req.org_unit_sid IN
 (3057, 3142, 3058, 3143, 3059, 3144, 3060, 3145,
 3061, 3146, 3062, 3147, 3063, 3148, 3064, 3149,
 3065, 3150, 3066, 3151, 3067, 3152, 3068, 3153,
 3069, 3154, 3070, 3155, 3071, 3156, 3072, 3157,
 3073, 3158, 3074, 3159, 3075, 3160, 3076, 3161,
 3077, 3162, 3078, 3163, 3079, 3164, 3080, 3165,
 3081, 3166, 3082, 3167, 3083, 3168, 3084, 3169,
 3085, 3170, 3086, 3171, 3087, 3172, 3088, 3173,
 3089, 3174, 3090, 3175, 3091, 3176, 3092, 3177,
 3093, 3178, 3094, 3179, 3095, 3180, 3096, 3181,
 3097, 3182, 3098, 3183, 3099, 3184, 3100, 3185,
 3101, 3186, 3102, 3187, 3103, 3003, 75000104,
 75000108, 2006, 75000103, 75000102, 75000113,
 75000111, 75000109, 2001, 2009, 75000105,
 75000107, 2004, 2010, 2013, 2014, 2005, 2011,
 75000112, 2002, 1001, 2012, 75000106, 2007,
 75000101, 2003, 75000110, 2008, 3001, 3002, 3019,
 3104, 3020, 3105, 3021, 3106, 3022, 3107, 3023,
 3108, 3024, 3109, 3025, 3110, 3026, 3111, 3027,
 3112, 3028, 3113, 3029, 3114, 3030, 3115, 3031,
 3116, 3032, 3117, 3033, 3118, 3034, 3119, 3035,
 3120, 3036, 3121, 3037, 3122, 3038, 3123, 3039,
 3124, 3040, 3125, 3041, 3126, 3042, 3127, 3043,
 3128, 3044, 3129, 3045, 3130, 3046, 3131, 3047,
 3132, 3048, 3133, 3049, 3134, 3050, 3135, 3051,
 3136, 3052, 3137, 3053, 3138, 3054, 3139, 3055,
 3140, 3056, 3141)
 AND req.pa_rqst_sid = prs.pa_rqst_sid
 AND prs.oprtnl_flag = 'A'
 AND prs.pa_rqst_srvc_sid = psd.pa_rqst_srvc_sid
 AND psd.oprtnl_flag = 'A'
 AND req.pa_rqst_sid = pci.pa_rqst_sid
 AND pci.oprtnl_flag = 'A'
 AND req.pa_rqst_sid = prxm.pa_rqst_sid
 AND prxm.oprtnl_flag = 'A'
 AND md.oprtnl_flag = 'A'
 AND md.status_cid = 2
 AND TRUNC (SYSDATE) BETWEEN md.from_date AND md.TO_DATE
 AND prxm.mbr_sid = md.mbr_sid
 AND ou.org_unit_sid = req.org_unit_sid
 AND ou.oprtnl_flag = 'A'
 AND req.pa_rqst_sid = prxpl.pa_rqst_sid
 AND prxm.pa_rqst_sid = prxpl.pa_rqst_sid
 AND pci.pa_rqst_sid = prxm.pa_rqst_sid
 AND pci.pa_rqst_sid = wmdtl.subsystem_task_sid
 AND pci.pa_rqst_sid = prxpl.pa_rqst_sid
 AND prxpl.pa_prvdr_type_lkpcd = 'RR'
 AND prxpl.oprtnl_flag = 'A'
 AND req.status_cid = sts.status_cid
 AND sts.status_type_cid = 3
 AND sts.oprtnl_flag = 'A'
 AND prxpl.prvdr_lctn_iid = pl.prvdr_lctn_iid
 AND p.prvdr_sid = pd.prvdr_sid
 AND p.prvdr_sid = pl.prvdr_sid
 AND pd.oprtnl_flag = 'A'
 AND pd.status_cid = 2
 AND TRUNC (SYSDATE) BETWEEN pd.from_date AND pd.TO_DATE
 AND wmdtl.subsystem_task_sid = req.pa_rqst_sid
 AND wmdtl.subsystem_lkpcd = 'PA'
 AND wmdtl.oprtnl_flag = 'A'
 AND req.pa_rqst_date > (SYSDATE - 365)
 ORDER BY TO_DATE ("Request Date", 'MM/dd/yyyy hh24:mi:ss') DESC,
 "Beneficiary Name" ASC) a
WHERE ROWNUM < 102;regards,
P Prakash
Edited by: BluShadow on 17-May-2011 15:01
added {noformat}{noformat} tags around the code

833560 wrote:
Can any one give me clue ,how to find out which sub query returns more than one row in the following query .This is why smaller, simpler queries are easier to work with than huge ones - when something like this goes wrong smaller queries are much eaiser to debug. Unfortunately using smaller, easier-to-work with queries is not always an option
Ganesh is right - you will have to dissect the big query bit by bit until you find the offending subquery. If there is another way I would like to find out about it too.
The easiest way to do this is probably to use block comments to isolate parts of the query bit by bit until you find the offending part. If you carefully examine the subqueries you might be able to figure out which one is returning multiple rows without commenting everything
Good luck!

Hi, My printing has suddenly changed in adobe to a large scale, as in, what should be one page of print comes out as 24 pages? I havent changed anything, its happening on more than one document also, I have to stop my printer before all the pages spew o

Hi, My printing has suddenly changed in adobe to a large scale, as in, what should be one page of print comes out as 24 pages? I havent changed anything, its happening on more than one document also, I have to stop my printer before all the pages spew out. I have tried printing 'one single page' and it does exactly the same? Help?

Is the Poster Print feature turned ON?

3rd party dropshipment carried out by more than one 3rd party vendor

Similar Messages

Maybe you are looking for