3rd party filter callup in panel

Can someone tell me how to call up a 3rd party PSCS5 plug-
in filter in a panel in configurator 2 please?
I would like to build a panle with my most used filters such as Nik, onOne,Topaz etc
JImmy

1. You may install "ScriptingSupport.8li", and invoke your plug-in. Then go to desktop, check file "ScriptingListenerJS.log".
If it can record a piece of script, then you can drag a script button, and paste script into "script" attribute.
2. If it can't record to script, you can try to new an action, and click the menu item of your plug-in. And then drag an "Action" button, set the action name and "Action Set".
You can find post about how to package an action with Configuartor panel in this forum.

Similar Messages

Error msg is generated when attempt to crop a TIF that included a 3rd party filter (Win7 Pro SP1)

Error msg is generated when attempt to crop a TIF that included a 3rd party filter not on
local machine. (Windows 7 Professional SP1)
1. File created in CS5 with third party filter applied to smart object (filter:Neat Image
published by ABSoft.)
2 Transfer to another computer that does not have the filter installed.
3. Open in Photoshop CS6.
4. Use crop tool to attempt to crop the photo.
5. Receive error message "Could not complete the command because of a program
error."
6. Crop completes and can be saved, but filter is disabled and cannot be enabled unless
moved back to original computer.
Expected result should be:
Allow filter to be enabled as CS5. Or message similar to message produced with
missing font.
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer,
SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 1995 MHz
Built-in memory: 6051 MB
Free memory: 2949 MB
Memory available to Photoshop: 5290 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GT 540M/PCI/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
Video Card Number: 1
Video Card: NVIDIA GeForce GT 540M
OpenCL Unavailable
Driver Version: 8.17.12.6744
Driver Date: 20110301000000.000000-000
Video Card Driver:
nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode:
Video Card Caption: NVIDIA GeForce GT 540M
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\wayne\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 450.2G, 387.4G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64
Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1642
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   5,0,10,0
   AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012
18:00:00)   1.000000
   ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
   BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build
gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build
gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0;
BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112
0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.0
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Embed Watermark 4.0
   Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Extrude 13.0
   FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Mezzotint 13.0
   Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Pinch 13.0
   Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0
   Shear 13.0
   Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Sumi-e 13.0
   Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

See if you can troubleshoot Safari extensions and third party plugins before Safari crashes.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.

3rd party filter missing after upgrade to Photoshop CC 2014

Upgraded my Photoshop CC to 2014.... all my presets seems to have imported fine, but none of my 3rd party filters, like Nik and Topaz are showing up in the filter menu.
What happened to them??

You'll need to reinstall them into Photoshop CC (2014). It's a completely separate application on your system, in a different set of folders.
-Noel

Error installing NI TPC Service on a 3rd party windows XPe Based Touch Panel

Hi,
First of all sorry for my English.
I'm having trouble when i try to install NI TPC SERVICE on a 3rd party Touch Panel that runs Windows XPe (Embedded).
I have tried lot of time. I'm installing the msi application for XPe from the folder "NI_TP_Service" of the Installation Path for LabVIEW 8.6 Touch Panel Module.
The installer file hungs after installing the service and just when it tries to initialize it and I get a Error Windows that says "Error 1920. Service 'NI TPC Service' (NITPCService) falied to start. Verify that you have sufficient privileges to start system services."
I'm logged as Administrator, and I don't know what to do.
If anyone know what can i do I'll be pleased in hearing the answer.
Regards

Hi AlexDarsigny,
You will need either the Touch Panel Module or the Datalogging and Supervisory Control Module (DSC). Either of these modules will allow you to deploy and install NI software to your touch panel. They also include many other features for developing those applications. You will also need a deployment license for any non-NI touch panel that you plan on deploying the applications to. The other software needed on the touch panel itself will include the LabVIEW Run-Time Engine and the NI TPC Service. The following link has some information on this:
http://zone.ni.com/reference/en-XX/help/371618H-01/lvxpe/tpc_install_tpc_srvc/
Once deployed, the program will run as a stand-alone application that can be started from the HMI itself. Of course this depends on the functionality you create within the application, just like you would for any standard LabVIEW application.
David C

CS4 plug-ins, 3rd party plug-ins and filter problems

1- What happened to all the filters available in CS3? They were a good thing. Why does Adobe kill off what's already working well and looking good? For instance, where's the Distort>Diffuse???
2- Same thing with PS plug-ins and third party plug-ins. They're all gone, now that I've "upgraded." (A term I use with disgust.) I paid too much money for all the aggravation I've been experiencing with these three issues.
But I digress: I dragged plug-ins to the folder, but they still don't show up.
Thank you.......
iMac 23" 2.16 GHz, Intel Core 2 Duo 3 GB RAM OS 10.5.5 ACR5.2
PS: Why does Adobe take away what finally works smoothly? Why offer a feature, and then take it back 18 months later with the next version? I'll sleep better at night if I can just understand how it helps the users to have the useful deleted.

First of all, make sure you have not moved the application icon or the application folder from the default install location, and that you have not created subfolders there in a misguided attempt to "organize" things.
Secondly, please tell us what you upgraded from. If you had been running some 3rd party plugins that are not written for Universal Binary, they may not run in a newer OS or a newer machine.
Third, please see the documentation or Adobe Photoshop's Principal Program Manager John Nack's blog for the stuff that
was taken out in CS4:
http://blogs.adobe.com/jnack/2008/10/where_did_extra.html
Filter > Distort > Diffuse Glow is right there where it's always been. If you don't see it, you're either in 16 bits or have a bad install.

The options under privacy panel allow no choices on cookies e.g. blocking 3rd party cookies. how can I block 3rd party cookies?

running firefox 4.0.1. windows vista
On another computer, I have a different layout on privacy panel with options to block 3rd party cookies. I run the same systems as indicated above.

At the top of the privacy panel, choose "Use custom settings for history", and you will then be able to set the cookie settings however you like them.

3rd party Motion filter

Where do I install 3rd party filters in Motion?

They just show up in the filters list now. If the developer has published them to Apple's spec, you will have a folder with the name of the publisher. I have filter folders for BCC, idustrial design, CHV, etc.
bogiesan

Why are illustrator CS4 3rd party plugin panels taking minutes to load?

Hello Everyone
I use IL on Mac and use some 3rd party plugins with my software [This problem is most noticeable with the Cvalley plugins - Filterit and Xtreampath]. The problem is that often they'll take many minutes to load and stay as blank grey panels [as seen in the picture] with no manipulatable variables - does anyone know the reason for this and how to speed up their load time? as you'd imagine it slows me down a lot.
Here's an image of one of the dreaded blank panels; http://i35.photobucket.com/albums/d188/OphidianShenzi/blankpanel-1.jpg
Thank you greatly in advance again.

Are any of them PowerPC plugins (pre-2006)?
Is the sufficient disk space?*:
http://www.macmaps.com/diskfull.html
Have you tried repairing permissions?
- * Links to my pages may give me compensation.

Is there a 3rd Party Solution for Adobe's lack of recover for unsaved work?

Time and time again I am baffled by Adobe's inability or refusal to make the user experience consistent across it's entire Creative Suite.
I am repeatedly shocked by the punitive error messages I receive in Photoshop. It's as though you don't really care what the user wants, I mean what are we going to do, use MS Paint? So you are at liberty to provide such classic errors as "Unable to complete your request because of a program error" instead of "wait, did you mean apply that filter to the only visible layer that you had selected just seconds before and never requested that the layer be de-selected?" I could go on and on with the crazy and convoluted exceptions to logic in Photoshop, but I would rather just understand why, when you know that a problem exists and affects 90% of your users at some point, why wouldn't you try to build in some form of recovery when your program crashes
Why should I be punished for relying on your program not to crash when I am working on something? I have repeatedly been advised that the best solution is to save often. Sometimes that's not an option and why should it be my responsibility to compensate for your buggy program?
After 20 years of development, you can't figure out how to recover someone's work if they haven't been able to save for some reason and Phtooshop crashes? I have been using Photoshop since Version 3 (for sure, but more likely version 2) and back then you could rename your temp files and recover the work you hadn't saved. I understand that the mechanism by which fast previews (comps) of your work are displayed but not applied (like Live Image), but why isn't it possible to store a simple text file that could retrace my steps if your program crashes?
This is a real problem if you are processing a filter that takes 30 minutes and Photoshop waits until 29 minutes and 59 seconds to announce that it stopped working. Granted you can see your document in the background, but you can't save it? You can't commit whatever is in RAM for the undo states to disk? You can't have your program quickly save a new text file with the list of commands applied between saves? You can't do anything? After 20 years?
Microsoft includes recovery in Word, Excel, etc. Even SOME Adobe programs do it: InDesign...AfterEffects. Why doesn't your flagship program do it?
It's frustrating beyond belief and it baffles me that Adobe is celebrating the 20th anniversary of Photoshop and yet this basic, basic customer need is still not effectively addressed and furthermore, any question about it is answered with indignant indifference:
it doesn't work and we don't care what you want,
think you'd be happier with our competition....
oh wait, we don't really have any competition...
maybe you should save more often...
Is there a 3rd party solution that will allow me to recover my work in Photoshop when it crashes between saves? Or am I just stuck having to cope with rebuilding my work because Adobe refuses to provide a solution.
(let the backlash begin as I try to simulate my lens blur using MS Paint....not gonna happen)
Jase

Go to google and search for keyboard recording software. That will record all of your keystrokes.
CS4 running under windows 7 appearently has some problems. While it would be nice if Adobe went back and rewrote there software for an operating system that was in early development when CS4 was released, it is not likely to happen.
Excuse me, they did it is called Adobe Photoshop CS5 and is due to be release soon.
If, If you would stop ranting for a minute, and quit feeling like you are being slammed, and possibly listen for a minute.
I am currently running Windows Vista Home Premium "not my choice" on a Toshiba A215-S4747 with 3gb ram. When I bought this laptop the Toshiba Rep was at the Best Buy and I spoke with him about this very computer. I did not want to run Windows Vista, period, I had heard to many bad reports about it. The Toshiba Rep told me that was not a problem and this computer would run Windows XP Professional just fine.
So I bought this computer and 2gb of ram as it only came with 512mb. I went home happly and proceeded to install Windows XP Pro and the new memory. Guess what?
this computer will in fact run Windows XP Pro just fine as long as you take into consideration that there are almost no hardware drivers for the periferals that make up this computer.
So I reinstall Windows Vista and for the next year I am tied into fits because of system crashes. Finally I am at the point that I am going to take this computer to the Toshiba Office in Torrance California and personally give it back to them "I was going to throw it through the front office window.".
Just before I ran across memtest and I downloaded it and tested my memory. You got it I had a defective ram chip.
Best Buy replaced the chip no problem. that was in November of 2008. I do horrible things to this computer, I really can drive it. It has not crashed once since I found and fixed the problem.
No one is suggesting that you are an idiot! or inexperienced. but no matter what you do remember 2 very simple rules.
If you run into a problem 1. "Go Back To Basics" and 2. "KISS ie: keep it simple stupid" if you do this and I am speaking from my own experience you will find like and work a lot simpler and more pleasent.

Is there a way to block add-ons from being installed in Firefox, even add-ons coming from 3rd party sites?

I work in a small call center and I have been working on trying to convince IT and management to use Firefox on the computers on the call floor. The main issue I have been having in convincing them, is that you can't block add-ons and things like that as easily as in IE. I thought I had it with blocking addons.mozilla.org, which wouldn't allow access to Mozilla's add-on site. However, with that, techs would still be able to go to 3rd party sites, generally the creators of the add-ons, and download them there. Anybody have any ideas on how to stop this?

You can configure Firefox settings to notify you before installing an add-on.
-> click Firefox '''button''' and click '''Options''' (or Tools Menu -> Options)
* '''Security''' panel -> place Checkmark on '''Warn me when websites try to install add-ons''' -> click '''Exceptions''' button -> click '''Remove All Sites''' button and click '''OK'''
* click OK on Options window
Check and tell if its working.

Using 3rd party tags in JSF application

I have a 3rd party tag library used previously in a Struts application to check if an user is authenticated / has logged in. The tag looks like this: <authn:authenticate userVarName="user" scope="session" errorPage="error.jsp" successPage="/faces/Page1.jsp"></authn:authenticate>. One unusual thing about the tag is that the uri for it references a jar file that includes the tld.
I can build the app okay but deployment fails with the following error:
Deploying application in domain failed; Error loading deployment descriptors for authapp Line 91 Column 10 -- cvc-complex-type.2.4.a: Invalid content was found starting with element 'taglib'. One of '{"http://java.sun.com/xml/ns/j2ee":description, "http://java.sun.com/xml/ns/j2ee":display-name, "http://java.sun.com/xml/ns/j2ee":icon, "http://java.sun.com/xml/ns/j2ee":distributable, "http://java.sun.com/xml/ns/j2ee":context-param, "http://java.sun.com/xml/ns/j2ee":filter, "http://java.sun.com/xml/ns/j2ee":filter-mapping, "http://java.sun.com/xml/ns/j2ee":listener, "http://java.sun.com/xml/ns/j2ee":servlet, "http://java.sun.com/xml/ns/j2ee":servlet-mapping, "http://java.sun.com/xml/ns/j2ee":session-config, "http://java.sun.com/xml/ns/j2ee":mime-mapping, "http://java.sun.com/xml/ns/j2ee":welcome-file-list, "http://java.sun.com/xml/ns/j2ee":error-page, "http://java.sun.com/xml/ns/j2ee":jsp-config, "http://java.sun.com/xml/ns/j2ee":security-constraint, "http://java.sun.com/xml/ns/j2ee":login-config, "http://java.sun.com/xml/ns/j2ee":security-role, "http://java.sun.com/xml/ns/j2ee":env-entry, "http://java.sun.com/xml/ns/j2ee":ejb-ref, "http://java.sun.com/xml/ns/j2ee":ejb-local-ref, "http://java.sun.com/xml/ns/j2ee":service-ref, "http://java.sun.com/xml/ns/j2ee":resource-ref, "http://java.sun.com/xml/ns/j2ee":resource-env-ref, "http://java.sun.com/xml/ns/j2ee":message-destination-ref, "http://java.sun.com/xml/ns/j2ee":message-destination, "http://java.sun.com/xml/ns/j2ee":locale-encoding-mapping-list}' is expected.
; requested operation cannot be completed
Exception=Deployment failed.
The tag's tld is <tlib-version>1.1</tlib-version> <jsp-version>1.2</jsp-version>. I'm not sure if this is the problem or if 3rd party tags don't necessarily work within JSF (am using Creator) without modification. Does anyone have any advise on this? Should 3rd party tags work? If not, how do they need to be modified or turned into a component to work? This tag doesn't display anything - it checks if users have logged in and redirects them to another site to login if they did not log in.
Message was edited by:
sstgermain
Message was edited by:
sstgermain

Thanks for your reply! I do have the jar file, which includes the .tld, in my WEB-INF/lib
On Page1.jsp I tried using <%@ taglib uri="/WEB-INF/lib/myLibrary.jar" prefix="myTag" %> but got errors so I moved it to <jsp:root version="1.2" xmlns:myTag="/WEB-INF/lib/myLibrary.jar"...Should the <%@taglib uri = work? When I tried to use <%@taglib version I got errors saying strict xml enforced.
I am using the format prefix:tag format <myTag:checkaccess userVarName="user"
scope="session"
errorPage="error.jsp" ></myTag:checkaccess>
Do I need to somehow convert this tag into a component?
I think the jar is fine since I'm using it in a number of other applications.
Should the tag work? Do non-JSF tags have to be turned into components?

Using 3rd party tags

I have a 3rd party tag library, used previously in Struts apps, that I would like to use in a JSF application. The tag checks if a user has logged in to the app and redirects to a login site if not. It doesn't display anything to the screen. Should a 3rd party tag that worked with JSP/Struts work with JSP without modification???? If not, how do I need to modifiy it? Please let me know!
I imported the necessary libaries for the tag using <jsp:directive.page import="myFiles.*"/>
I added the tags uri (which happens to be a jar file in /web-inf/ to the <jsp:root version="1.2" xmlns:authn="/WEBINF/lib/myLibrary.jar"
The tag itself which I put between <jsp:root tags on Page1.jsp looks like this: <myTag:checkaccess userVarName="user"
scope="session"
errorPage="error.jsp"
Info from the tld: <tlib-version>1.1</tlib-version>
<jsp-version>1.2</jsp-version>
I have the taglib entry in the web.xml
I can build the app but when I try to deploy it I get the following error:
Deploying application in domain failed; Error loading deployment descriptors for devpin Line 91 Column 13 -- cvc-complex-type.2.4.a: Invalid content was found starting with element 'taglib'. One of '{"http://java.sun.com/xml/ns/j2ee":description, "http://java.sun.com/xml/ns/j2ee":display-name, "http://java.sun.com/xml/ns/j2ee":icon, "http://java.sun.com/xml/ns/j2ee":distributable, "http://java.sun.com/xml/ns/j2ee":context-param, "http://java.sun.com/xml/ns/j2ee":filter, "http://java.sun.com/xml/ns/j2ee":filter-mapping, "http://java.sun.com/xml/ns/j2ee":listener, "http://java.sun.com/xml/ns/j2ee":servlet, "http://java.sun.com/xml/ns/j2ee":servlet-mapping, "http://java.sun.com/xml/ns/j2ee":session-config, "http://java.sun.com/xml/ns/j2ee":mime-mapping, "http://java.sun.com/xml/ns/j2ee":welcome-file-list, "http://java.sun.com/xml/ns/j2ee":error-page, "http://java.sun.com/xml/ns/j2ee":jsp-config, "http://java.sun.com/xml/ns/j2ee":security-constraint, "http://java.sun.com/xml/ns/j2ee":login-config, "http://java.sun.com/xml/ns/j2ee":security-role, "http://java.sun.com/xml/ns/j2ee":env-entry, "http://java.sun.com/xml/ns/j2ee":ejb-ref, "http://java.sun.com/xml/ns/j2ee":ejb-local-ref, "http://java.sun.com/xml/ns/j2ee":service-ref, "http://java.sun.com/xml/ns/j2ee":resource-ref, "http://java.sun.com/xml/ns/j2ee":resource-env-ref, "http://java.sun.com/xml/ns/j2ee":message-destination-ref, "http://java.sun.com/xml/ns/j2ee":message-destination, "http://java.sun.com/xml/ns/j2ee":locale-encoding-mapping-list}' is expected.
; requested operation cannot be completed
Exception=Deployment failed.
Deployment failed.
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:210)
at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:75)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:234)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:242)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:125)
C:\Documents and Settings\sstgerma\My Documents\Creator\Projects\devpin\nbproject\build-impl.xml:607: Deployment failed.
BUILD FAILED (total time: 0 seconds)
Message was edited by:
sstgermain

Thanks for your reply! I do have the jar file, which includes the .tld, in my WEB-INF/lib
On Page1.jsp I tried using <%@ taglib uri="/WEB-INF/lib/myLibrary.jar" prefix="myTag" %> but got errors so I moved it to <jsp:root version="1.2" xmlns:myTag="/WEB-INF/lib/myLibrary.jar"...Should the <%@taglib uri = work? When I tried to use <%@taglib version I got errors saying strict xml enforced.
I am using the format prefix:tag format <myTag:checkaccess userVarName="user"
scope="session"
errorPage="error.jsp" ></myTag:checkaccess>
Do I need to somehow convert this tag into a component?
I think the jar is fine since I'm using it in a number of other applications.
Should the tag work? Do non-JSF tags have to be turned into components?

3rd party extensions not working in 2014.1 -seeming disaster!

When I updated to 2014.1 my 3rd party extensions will not activate in Live view. Yes I am using fluid grid layouts. Does anyone know a quick work around? I could not have imagined this happening!!

Hi Ben, I am using project seven ....
Image Gallery Magic 2
Accordion Panel Magic 3
Horizontal Mega Menu Magic
Previously I was able to create a template with a fluid grid layout, use the extensions to create a menu, etc. and then click on the extension item (in the menu pull down) and make updates from the third party screen. Not having design view, I cannot access the extensions in live view. Regrettably, I have built many sites using these extensions and now it is very cumbersome to edit and create new menu items. The extensions do work fine in sites that are not fluid grid layout, but most of the sites I have created are FGL.

3rd party distributed SW load balancing with In-Memory Replication

          Hi,
          Could someone please comment on the feasibility of the following setup?
          I've started testing replication with a software load balancing product. This
          product lets all nodes receive all packets and uses a kernel-level filter
          to let only one node at the time receive it. Since there's minimum 1 heartbeat
          between the nodes, there are several NICs in each node.
          At the moment it seems like it doesn't work: - I use the SessionServlet - with
          a 2-node cluster I first have the 2 nodes up and I access it with a single client:
          .the LB is configured to be sticky wrt. source IP address, so the same node gets
          all the traffic - when I stop the node receiving the traffic the other node takes
          over (I changed the colours of SessionServlet) . however, the counter restarts
          at zero
          From what I read of the in-memory replication documentation I thought that it
          might work also with a distributed software load balancing cluster. Any comments
          on the feasability of this?
          Is there a way to debug replication (in WLS6SP1)? I don't see any replication
          messages in the logs, so I'm not even sure that it works at all. - I do get a
          message about "Clustering Services startting" when I start the examples server
          on each node - is there anything tto look for in the console to make sure that
          things are working? - the evaluation license for WLS6SP1 on NT seems to support
          In-Memory Replication and Cluster. However, I've also seen a Cluster-II somewhere:
          is that needed?
          Thanks for your attention!
          Regards, Frank Olsen


We are considering Resonate as one of the software load balancer. We haven't certified
          them yet. I have no idea how long its going to take.
          As a base rule if the SWLB can do the load balancing and maintain stickyness that is fine
          with us as long as it doesn't modify the cookie or the URL if URL rewriting is enabled.
          Having said that if you run into problems we won't be able to support you since it is not
          certified.
          -- Prasad
          Frank Olsen wrote:
          > Prasad Peddada <[email protected]> wrote:
          > >Frank Olsen wrote:
          > >
          > >> Hi,
          > >>
          > > We don't support any 3rd party software load balancers.
          >
          > Does that mean that there are technical reasones why it won't work, or just that
          > you haven't tested it?
          >
          > > As >I said before I am thinking your configuration is >incorrect if n-memory
          > replication is not working. I would >strongly suggest you look at webapp deployment
          > descriptor and >then the config.xml file.
          >
          > OK.
          >
          > >Also doing sticky based on source ip address is not good. You >should do it based
          > on passive cookie persistence or active >cookie persistence (with cookie insert,
          > a new one).
          > >
          >
          > I agree that various source-based sticky options (IP, port; network) are not the
          > best solution. In our current implementation we can't do this because the SW load
          > balancer is based on filtering IP packets on the driver level.
          >
          > Currently I'm more interested in understanding whether it can our SW load balancer
          > can work with your replication at all?
          >
          > What makes me think that it could work is that in WLS6.0 a session failed over
          > to any cluster node can recover the replicated session.
          >
          > Can there be a problem with the cookies?
          > - are the P/S for replication put in the cookie by the node itself or by the proxy/HW
          > load balancer?
          >
          > >
          > >The options are -Dweblogic.debug.DebugReplication=true and
          > >-Dweblogic.debug.DebugReplicationDetails=true
          > >
          >
          > Great, thanks!
          >
          > Regards,
          > Frank Olsen

SCUP2011 - SCCM2012 SP1 CU4: 3rd party updates fail to install with SoftDistHashMismatchEvent

We publish 3rd party updates like Adobe Flash, Shockwave, Firefox with SCUP 2011 into WSUS.
These 3rd party updates are imported/synchronized into our SCCM 2012 SP1 (CU4) environment and deployed to the clients/servers.
But all of these 3rd party fail to install. Software Center returns the following error: The software change returned error code 0x80091007(-2146889721).
The standard Microsoft Updates are downloaded and installed without any error.
The 3rd party updates are downloaded by the client, but are deleted after checking the hash because of a hash mismatch (SoftDistHashMismatchEvent).
As shown in the CAS.log:
Submitted CTM job {5ACC812D-2126-4696-A852-AED288B4FEB0} to download Content fea1aeb3-af1a-45aa-b464-4f90422b4720.1 under context System ContentAccess 26-03-2014 22:28:31 5956 (0x1744)
Successfully created download request {4F582B67-EDFC-486A-9762-96572A780CBC} for content fea1aeb3-af1a-45aa-b464-4f90422b4720.1 ContentAccess 26-03-2014 22:28:31 5956 (0x1744)
Location update from CTM for content fea1aeb3-af1a-45aa-b464-4f90422b4720.1 and request {4F582B67-EDFC-486A-9762-96572A780CBC} ContentAccess 26-03-2014 22:28:32 3548 (0x0DDC)
Download location found 0 - net:http://sccm.mydomain.local:8530/Content/32/04B9361CDC426D2DBC94B90A7BB0172CAE84D532.cab ContentAccess 26-03-2014 22:28:32 3548 (0x0DDC)
Download location found 1 -
http://sccm.mydomain.nl/SMS_DP_SMSPKG$/fea1aeb3-af1a-45aa-b464-4f90422b4720 ContentAccess 26-03-2014 22:28:32 3548 (0x0DDC)
Download request only, ignoring location update ContentAccess 26-03-2014 22:28:32 3548 (0x0DDC)
Download started for content fea1aeb3-af1a-45aa-b464-4f90422b4720.1 ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Download completed for content fea1aeb3-af1a-45aa-b464-4f90422b4720.1 under context System ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
File 04b9361cdc426d2dbc94b90a7bb0172cae84d532.cab not expected in folder. ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
The content on the local cache location is not available anymore C:\Windows\ccmcache\px. Try downloading later ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Download failed for content fea1aeb3-af1a-45aa-b464-4f90422b4720.1 under context System, error 0x80091007 ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Download failed for download request {4F582B67-EDFC-486A-9762-96572A780CBC} ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Raising event:
[SMS_CodePage(850), SMS_LocaleID(1043)]
instance of SoftDistHashMismatchEvent
ClientID = "GUID:93FA6D8A-9689-46F4-BB57-256BE8995A7B";
DateTime = "20140326212832.587000+000";
MachineName = "SERVERNAME";
PackageId = "fea1aeb3-af1a-45aa-b464-4f90422b4720";
PackageName = "fea1aeb3-af1a-45aa-b464-4f90422b4720";
PackageVersion = "1";
ProcessID = 5124;
SiteCode = "A01";
ThreadID = 5956;
ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Successfully raised SoftDistHashMismatchEvent event. ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Error: DeleteDirectory:- Failed to delete Directory with Error 0x00000003. ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Error: DeleteDirectory:- Failed to delete Directory C:\Windows\ccmcache\px.BCWork with Error 0x00000002. ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Releasing content request {4F582B67-EDFC-486A-9762-96572A780CBC} ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
The strange thing is that 3rd party updates are downloaded/installed succesfully when using the Windows Update Control Panel applet, while WSUS and SCCM2012 are installed on the same server!
Our environment uses PKI only for communication/authentication, because we manage multiple untrusted networks
All servers are virtual servers (VMWare ESXi 5.5) with Windows Server 2008 R2 SP1 + latest updates.
I already performed the following trouble-shooting tasks without any success:
- I reinstalled the different Site System Roles.
- Removed the SCCM client from the SCCM database and client and reinstalled
- Removed the anti-virus software
- Redeployed the 3rd party updates
- Replaced the E1000 NICs with VMXNET3 (server and client)
- Ensured no proxy between server and client
- Downloading and installing the 3rd party updates manually from the specified download locations
(e.g.
http://sccm.mydomain.local:8530/Content/32/04B9361CDC426D2DBC94B90A7BB0172CAE84D532.cab or
http://sccm.mydomain.nl/SMS_DP_SMSPKG$/fea1aeb3-af1a-45aa-b464-4f90422b4720) succeeds without a error.
I really don't know what's going wrong.
Is it a bug?

Hi,
I recommend that you try uninstalling the following KB’s.
Run the following command to uninstall:
wusa /uninstall /kb:2735855 /quiet /norestart
wusa /uninstall /kb:2750841 /quiet /norestart
Meanwhile, here's one video for your reference.
Managing Third Party Updates with System Center 2012 Configuration Manager SP1
http://channel9.msdn.com/Events/MMS/2013/UD-B326
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

3rd party filter callup in panel

Similar Messages

Maybe you are looking for