3rd party mail program?

I'm having issues with MacMail and ATT/yahoo (sbcglobal.net). Apple points its fingers at ATT and ATT points their fingers at Apple. I've given up. I would like to find a 3rd party mail program that will handle multiple accounts and work with ATT/yahoo. Any suggestions?
Thanks.

Try ThunderBird...
http://www.mozilla.org/en-US/thunderbird/

Similar Messages

How to: Send out e-mails through a 3rd party mail host?

Hi,
We would like to send out e-mail campaign from our CRM system.
But we would not like to risc being blacklisted as spammer, so we would like to send out the e-mails using a 3rd party mail host provider.
Our sales department already use our CRM system for sending out their sales related e-mails.
They use our corporate exchange server for that.
So the scenario is:
I have created a smtp node in trx scot, and liked it to our domain *company.com
This node points to our corporate mail host. All our normal users use this domain.
All our campaign e-mails from CRM should be send using another mail host as described before.
According to note 455140, I don't see that I can create a new smtp node in scot.
And link this one to our new e-mail domain *company-news.com and the external mail host.
How do I send these e-mails to a specific mail host when the sender is a specific domain e.g. company-news.com?
My Exchange server guys say that they can't redirect specific mails send from our CRM system.
They can only redirect all mails that are send from our CRM system, but then all the e-mails from our sales reps are also send through a 3rd party mail host.
Does anyone have battled with this before, and how did you solve it?
best regards
Michael Wolff Knudsen

We bought a new Exchange server, version 2007 just for CRM. This Exchange version can tunnel the e-mail to our 3rd party vendor, and they can send out the e-mails so neither one of us gets spammed.

Is there any way to upload iWeb files updates only with a 3rd party ftp program to a new hoster, e.g. Godaddy? I see no posts newer than 2007

Is there any way to upload iWeb files updates only with a 3rd party ftp program to a new hoster, e.g. Godaddy? I see no posts newer than 2007.

If you are using iWeb V 3, there are two other options for publishing the site...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
Some pointers for choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html

Sync 3rd party calendar program installed on palm to outlook to bb?

as the subj line states...
i have a palm t/x running a 3rd party calendar program (calendarscope) which i sync from my desktop because that is where the master is.
from research i understand that i have to sync my palm calendar program with outlook using the import function in outlook, then sync (convert) it with my bb using the switch device wizard?
as of right now, when i click on the switch device wizard, my select desktop organizer cannot be chosen as the whole screen is grey and won't let me chose any of the 2 options.
i need help PLEASE!

anyone?????????????????????????????????

What is the difference between Outlook features using exchage server and using 3rd party mail server ?

Hi~ I'd like to know what the difference is between Outlook features using exchage server and using 3rd party mail server.
If I use 3rd party mail server with Outlook, Outlook features are the same as Exchange Server ?
I want to use all Outlook features..

The basic features (and many advanced features) are identical in all accounts. With pop3, your mail, calendar, contacts, tasks, notes are stored in a pst and are only on the computer. IMAP accounts only sync email back to the server, not calendar,
contacts, and tasks. Outlook.com EAS accounts (aka Hotmail) syncs calendar and contacts back to the server. Exchange mailboxes stores everything on the server - mail, calendar, contacts, custom views, rules - and if you open the mailbox in outlook on
any other computer, the mailbox is identical. Because everything is on the server, you'll have much better syncing with smartphones and tablets with Exchange mailboxes.
Calendar sharing, open other users folder, and retention policies are Exchange-only. Mail Tips and apps (linked under the reading pane header in Outlook 2013) are Exchange-only.
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

ICal server and external invitations via 3rd party mail server

Hi everyone,
OS 10.6.5 Server:
Services running
AFP
DNS
iCal
Open Directory
Push Notification
We are currently testing iCal server and have configured it to send out invites via our mail server (which is running on a different server) by creating the com.apple.calendarserver user on our mail server.
Email notifications are then configured under the Enable Email Invitations tab in the iCal service of Server Admin as follows:
IMAP
Email address: [email protected]
Incoming server: mail.mytest.com
Port: 143 (not using SSL)
Username: com.apple.calendarserver
Password: secret
SMTP: mail.mytest.com
Port: 25 (not using SSL)
Server requires authentication
Username: com.apple.calendarserver
Password: secret
My test OD users are able to send out invites both internally to other iCal users and externally via email.
So for example, I invite someone to a meeting and enter their gmail address ([email protected]), the invitation goes out correctly - when I log into gmail I see the invitation.
When responding to the invitation (clicking Yes), the mail server receives the response from gmail and the iCal server collects the message via IMAP.
However, the iCal server doesn't seem to parse the received email correctly as I get the following error in the iCal error logs:
[twistedcaldav.extensions#info] Cannot authenticate proxy user 'com.apple.calendarserver' without X-Authorize-As header
2011-03-03 17:44:03+1100 [-] [mailgateway] 2011-03-03 17:44:03+1100 [AuthorizedHTTPGetter,client] [twistedcaldav.mail#error] Mail gateway failed to inject message <[email protected]> (Reason: 400 Bad Request)
2011-03-03 17:44:03+1100 [-] [mailgateway] 2011-03-03 17:44:03+1100 [AuthorizedHTTPGetter,client] [twistedcaldav.mail#debug] Failed calendar body: BEGIN:VCALENDAR
2011-03-03 17:44:03+1100 [-] [mailgateway] VERSION:2.0
2011-03-03 17:44:03+1100 [-] [mailgateway] CALSCALE:GREGORIAN
2011-03-03 17:44:03+1100 [-] [mailgateway] METHOD:REPLY
2011-03-03 17:44:03+1100 [-] [mailgateway] PRODID:-//Google Inc//Google Calendar 70.9054//EN
2011-03-03 17:44:03+1100 [-] [mailgateway] BEGIN:VEVENT
2011-03-03 17:44:03+1100 [-] [mailgateway] UID:43121576-1183-40C8-82D8-A052754AD1CE
2011-03-03 17:44:03+1100 [-] [mailgateway] DTSTART:20110406T080000Z
2011-03-03 17:44:03+1100 [-] [mailgateway] DTEND:20110406T090000Z
2011-03-03 17:44:03+1100 [-] [mailgateway] ATTENDEE;[email protected];CUTYPE=INDIVIDUAL;PARTSTAT=DECLINED;RO
2011-03-03 17:44:03+1100 [-] [mailgateway] LE=REQ-PARTICIPANT;X-NUM-GUESTS=0:mailto:[email protected]
2011-03-03 17:44:03+1100 [-] [mailgateway] CREATED:20110303T062518Z
2011-03-03 17:44:03+1100 [-] [mailgateway] DESCRIPTION:
2011-03-03 17:44:03+1100 [-] [mailgateway] DTSTAMP:20110303T064335Z
2011-03-03 17:44:03+1100 [-] [mailgateway] LAST-MODIFIED:20110303T064335Z
2011-03-03 17:44:03+1100 [-] [mailgateway] LOCATION:
2011-03-03 17:44:03+1100 [-] [mailgateway] ORGANIZER;CN=com.apple.calendarserver+07b1c044-9d98-4cdc-afe3-48139218ee35
2011-03-03 17:44:03+1100 [-] [mailgateway] @mytest.com:urn:uuid:B72794FB-3242-48D7-AC22-A584D279B9F9
2011-03-03 17:44:03+1100 [-] [mailgateway] SEQUENCE:3
2011-03-03 17:44:03+1100 [-] [mailgateway] STATUS:CONFIRMED
2011-03-03 17:44:03+1100 [-] [mailgateway] SUMMARY:one more test
2011-03-03 17:44:03+1100 [-] [mailgateway] TRANSP:OPAQUE
2011-03-03 17:44:03+1100 [-] [mailgateway] END:VEVENT
2011-03-03 17:44:03+1100 [-] [mailgateway] END:VCALENDAR
2011-03-03 17:44:03+1100 [-] [mailgateway]
I have set a rule on our mail server to bypass any spam filtering for all messages sent to the [email protected] address, but this doesn't seem to make any difference.
Does anyone else have this working ? Any ideas ?
Many thanks
Message was edited by: gen_bunty
null

The issue is not "user authorization". The issue is that the 3rd-party service does not accept all incoming relay requests unless there is authentication with a registered account (which we have). This protects the 3rd-party service from becoming the relaying host for the universe's spoofed and anonymous spam. My deduction is that there is no mechanism in UTL_MAIL to designate not only the 3rd-party ip-address:port (by-passing the local sendmail server) but also providing the username:password for the account there for authentication.
Plan A: I have attempted to follow directions for client-side SMTP Authentication for Relaying on the sendmail.org site.
I have not been successful in completing a simple mailx interactive test, much less completing a UTL_MAIL configuration.
I am scouring the user universe for someone who has put all the pieces together successfully and can advise. . . .
Edited by: StevenInTallyFl on Mar 26, 2010 3:50 PM
to clarify that I cannot get from UTL_MAIL to 3rd-party IP directly

Will upgrading on to OS X Mavericks (from Snow Leopard 10.6.8) affect the running of the installed 3rd party softwares/programs?

I have just received an email encouraging me to upgrading on to OS X Mavericks (from Snow Leopard 10.6.8). Currently I do have in my computer several 3rd party software and programs (from Adobestuff, finalcut Pro, MS Office, ILife etc.
Will upgrading to OS X Mavericks affect the running of these software /programs? Will I need to also upgrade these softwares?

There may be issues with compatibilty, as with any OS upgrade. Snow leopard (10.6.N) includes a piece of software from Apple called Rosetta. This software allows older PowerPC applications to run on Intel based Macs. This software does not run on any OS X higher than the latest Snow Leopard, 10.6.8. You can see if you have any of programs that require Rosetta installed by bringing up the "System Information" application through spotlight (click on the magnifying glass icon on the upper right, type System Information in the search field and select the application thta is found).
Once in System Information select "Applications" under "Software" near the bottom of the list. Scroll through the list of applications and if any indicate that they are PowerPC based then they will not run under Lion, Mountain Lion or Mavericks.
Hope this helps.

3rd Party Drivers - Program installation stalled

I'm trying to install an embroidery program (Bernina) in XP on a macbook pro with boot camp, but somewhere down the process the installation always hangs with a small box generated by installer that says 'Installing 3rd Party drivers'. After this the install program is using 0% CPU indefinitely and only 'End Task' will shut it down. Using Boot Camp 2.1.
The program successfully installed on on Dell laptop, and for a while I thought the problem was SP3 being installed with XP. Uninstalling SP3 resulted in no change in install outcome, and did cause some other broken programs.
The program has a USB security key for authentication, but we can't even get that far.
Any & all suggestions would be welcome. Thanks
David

Closed due to no answer after 2 years.

Recommended 3rd party recovery programs

I did recently look through a few of the older topics, but was a little lost as to which program I should choose, as there's so many.
So I'm going to be purchasing a laptop within the week and I need a way to transfer my music on my ipod to itunes (on the laptop). I'm familiar with the manual procedure of locating the hidden files and copying them, but I'm concerned about keeping my play-counts and the such. I've been rifling through a good deal of these third party programs, but some seem a little shifty and complicated. Any real recommended programs that anyone has used succesfully? Thanks in advance.

Hi there,
There are plenty of programs that do this but the only one that is able to completely build your iTunes library from your iPod is CopyTrans http://www.copytrans.net
This tool does not only handle your songs like others do but also your playlists, ratings, play count, album artworks, videos, and podcasts (incl. subscriptions) etc and imports all that to iTunes in the right order and categories.

Recommended 3rd party transfer program

I did recently look through a few of the older topics, but was a little lost as to which program I should choose, as there's so many.
So I'm going to be purchasing a laptop within the week and I need a way to transfer my music on my ipod to itunes (on the laptop). I'm familiar with the manual procedure of locating the hidden files and copying them, but I'm concerned about keeping my play-counts and the such. I've been rifling through a good deal of these third party programs, but some seem a little shifty and complicated. Any real recommended programs that anyone has used succesfully? Thanks in advance.

You might consider instead purchasing an external hard drive (they are pretty cheap right now), copying your iTunes folder to that drive, installing iTunes on the new laptop and then copying the iTunes folder from the external hard drive to the laptop.
This will preserve everything you have and the bonus is you will now be able to easily back up your library in the future.

Migration scenario from 3rd party mail server to GW12?

Hi
We need to migrate from existing e-mail server (Axigen ) to GW12.
The main concern is how to do that as quickly as possible or step by step without disrupting mail traffic and users.
Here is the situation:
In local network there is mentioned Axigen mail server serving aprox 70 users at single location.
Our official domain is hosted outside by Hosting provider where their mail server forwards all mail to our DDNS address where is ported to local mail server. Forwarding is performed discrete on user base. Each [email protected] is forwarded to [email protected]. where local server taking over.
This setting is harder to maintain because it is necessary to maintain users and aliases on outside server manually. However, this setting has some advantages. First of all, forwarding is happened immediately. If for some reason , local server is unreachable, outside server will keep on trying for two more days.
Second advantage is that we can use anti spam and virus blocking at the providers side.
Both functionality we could'nt achieve with simple global forwarding of all mail to local server.
This comment is digresion from main topic.
Outgoing mail is relayed by local server over our Internet Connection provider's SMPT host.
Local mail is delivered locally.
We maintain local DNS server too.
Most users are using POP service, while IMAP is used by few only. All users are using Thunderbird so far.
All users in the future should use full GW capabilities with regular GW client, mobile clients and so on.
GW12 server is installed and up already. It is tested locally and tested for remote sending. So, only remote receiving is not tested yet, so neither correct domain is set yet.
Present users authentication is performed by Axigen server and LDAP connection to eDir. STARTTLS is used between clients and server.
Our plan is simple to change local DNS record point to new GW server, to change NAT/routing point to new server and set correct domain for the GW server.
We expect that this will be transparent for users while they will continue to use Thunderbird (certificate mismatch will be issued by first connection and first mail sending. But we plan to warn users in advance together with instructions what to do. My phone will ring that morning many times, I am sure). Few IMAP accounts we can prepare in advance by move mail manually to local folders and back to GW server later.
Latest step should be migrate users from Thunderbird to GW client. This need to be perfomed manually at each user seat. Each Thunderbird client need to be switched to IMAP and then mail need to move to GW server.
Here is concern about old mail volume. Many users have their old mail archived in local folders by years. Some of them has quite huge amount of archived mails with heavy attachments. However old mail can be moved gradually later.
So, this is our plan. Does anybody has any suggestion, comment or wish to point some problem we didn't aware of?
Thank you.
Drazen

On 9/24/2012 3:56 AM, dzuvela wrote:
>
> Hi
> We need to migrate from existing e-mail server ('Axigen '
> (http://www.axigen.com/)) to GW12.
> The main concern is how to do that as quickly as possible or step by
> step without disrupting mail traffic and users.
>
> Here is the situation:
> In local network there is mentioned Axigen mail server serving aprox 70
> users at single location.
> Our official domain is hosted outside by Hosting provider where their
> mail server forwards all mail to our DDNS address where is ported to
> local mail server. Forwarding is performed discrete on user base. Each
> [email protected] is forwarded to [email protected]. where local
> server taking over.
>
> This setting is harder to maintain because it is necessary to
> maintain users and aliases on outside server manually. However, this
> setting has some advantages. First of all, forwarding is happened
> immediately. If for some reason , local server is unreachable, outside
> server will keep on trying for two more days.
> Second advantage is that we can use anti spam and virus blocking at the
> providers side.
> Both functionality we could'nt achieve with simple global forwarding of
> all mail to local server.
> This comment is digresion from main topic.
>
> Outgoing mail is relayed by local server over our Internet Connection
> provider's SMPT host.
> Local mail is delivered locally.
>
> We maintain local DNS server too.
>
> Most users are using POP service, while IMAP is used by few only. All
> users are using Thunderbird so far.
>
> All users in the future should use full GW capabilities with regular GW
> client, mobile clients and so on.
>
> GW12 server is installed and up already. It is tested locally and
> tested for remote sending. So, only remote receiving is not tested yet,
> so neither correct domain is set yet.
>
> Present users authentication is performed by Axigen server and LDAP
> connection to eDir. STARTTLS is used between clients and server.
>
>
> Our plan is simple to change local DNS record point to new GW server,
> to change NAT/routing point to new server and set correct domain for the
> GW server.
> We expect that this will be transparent for users while they will
> continue to use Thunderbird (certificate mismatch will be issued by
> first connection and first mail sending. But we plan to warn users in
> advance together with instructions what to do. My phone will ring that
> morning many times, I am sure). Few IMAP accounts we can
> prepare in advance by move mail manually to local folders and back to GW
> server later.
>
> Latest step should be migrate users from Thunderbird to GW client. This
> need to be perfomed manually at each user seat. Each Thunderbird client
> need to be switched to IMAP and then mail need to move to GW server.
> Here is concern about old mail volume. Many users have their old mail
> archived in local folders by years. Some of them has quite huge amount
> of archived mails with heavy attachments. However old mail can be moved
> gradually later.
>
>
> So, this is our plan. Does anybody has any suggestion, comment or wish
> to point some problem we didn't aware of?
>
> Thank you.
> Drazen
>
>
most of this sounds good. With such heavy imap/pop usage, you MIGHT
want to consider installing a temporary dedicated gwia just for that
separate from the smtp handling gwia. But that might not be necessary at
all. 70 people isn't THAT much.

Printing in Iphoto 6 Vs. 3rd Party Printing Program?

Why is printing in Iphoto 6 seem to degrade or print out a picture worse than when you use Canon's Easy Photo or Photoshop? The pictures come out darker and not as true as when you use the other programs. It would be convenient to use just Iphoto for everything. Any suggestions or help?
Lenny R.

Lenny:
Welcome to the Apple Discussions. A lot has to do with color profiles and how iPhoto handles them. Canon's software probably uses the canon I've not gotten a handle on that either and use Photoshop from within iPhoto to do my most of my printing. I have PS set up to use the sRGB color profile as that's what is used by Apple for books, calendars, etc. iPhoto may or may not use the profile depending on how you have the preferences set up (Advanced section of iPhoto's preferences). As I said, since I do most everything via PS I just print from it also.
Do you Twango?

Outlook 2007 - Outgoing mail server from a 3rd party

I tried to set up the outgoing mail server for my Outlook 2007 with a 3rd party mail server. e.g. mail.xxxx.com, and I could not send the e-mail at all. If I set up the outgoing mail server as outgoing.verizon.net, I can send the email to everyone else but not to this 3rd party mail server mail.xxxx.com. I received the undeliverable message from Verizon that the mail was rejected due to not being able to log on to this 3r party mail server. I am working for this company from home and it requires me to set up this for my outgoing mail server. Does anyone know how to fix this, including specifying what needs to be done at the 3rd party mail server to change to accept emails sent from outgoing.verizon.net? Thank you in advance. Andy

Port 25 is the standard for SMTP, although some now use a submission port, 587. I know port 25 off network is blocked for residential users, I don't know if 587 is blocked off network because I have never tried it. I suspect it is. Verizon is by no means the only ISP to do this.
Business accounts do not have blocked ports as far as I know, so if you have a business account, you are free to communicate using port 25 anywhere.
Verizon has recently gone to non-standard port assignments for SMTP and POP servers. see
http://www22.verizon.com/ResidentialHelp/FiOSInternet/Email/Setup+And+Use/QuestionsOne/124289.htm?CM...

CMYK to RGB conversion without 3rd party software?

Does anyone know a way to use Automator to convert CMYK color mode images to RGB without having to have Photoshop or such installed? All Automator add ons I have seen thus far involve either Adobe products or other 3rd party image programs.
Thanks!

Hello again Ric,
Thanks for your help. I would appreciate a bit of Applescript help. I have Automator back in the mix after playing around a bit.
Yes, my associate who owns the website has neither PS, or GC. So if we can set up a way to automate this via email that would be great. I think I am actually about half way there, and I hope you will be kind enough to help me get the rest of the way.
My machine is no longer the spunkiest, so I am using GC to do the color mode conversion, as it can launch, convert, and save the file in less than 1/4 the time Photoshop takes to launch. So yes, I'm doing this in a crazy fashion, but I have good reasons.
This is my script thus far:
using terms from application "Mail"
on perform mail action with messages theMessages for rule theRule
tell application "Mail"
set numberOfMessages to count theMessages
repeat with eachMessage in theMessages
set theSubject to subject of eachMessage
try
set nameOfAttachment to the name of the first mail attachment of eachMessage
(*if nameOfAttachment ends with ".torrent" then*)
set filename to "Macintosh HD:Users:parr:Desktop:Alpha Images:•From Brett:" & nameOfAttachment
save first mail attachment of eachMessage in filename
tell application "GraphicConverter"
activate
open {alias filename}
save window 1
close window 1
quit
end tell
tell application "Automator"
execute "Alpha Convert"
end tell
end try
end repeat
end tell
end perform mail action with messages
end using terms from
This works up until I call my Automator workflow. In my workflow I currently have the scale item and the convert to jpeg item.
Question 1: How do we tell Automator what files to use as an input? Do I have to add a Get Selected or Get Specified Finder Items? Can I use the 'filename' variable from the above script?
Once I have that down, any advice you can give on emailing it back would be great.
Thanks again.
QS2002 933 - Soon to be Macbook 2.0 Mac OS X (10.4)

3rd party antivirus and antispyware not detected by Network Magic

I have Norton Internet Security and PC Tool Spyware doctor installed on my laptop. The operating system is Vista 7 home premium. 2 Network magic alerts indicate that my antivirus and antispyware programs are turned off. These alerts refer to the programs that come with the operating system. It does not detect my 3rd party software programs which are up and running with no problems reported. Is there a way fix these alerts.
Solved!
Go to Solution.

Henry4324 wrote:
I have Norton Internet Security and PC Tool Spyware doctor installed on my laptop. The operating system is Vista 7 home premium. 2 Network magic alerts indicate that my antivirus and antispyware programs are turned off. These alerts refer to the programs that come with the operating system. It does not detect my 3rd party software programs which are up and running with no problems reported. Is there a way fix these alerts.
Hi Henry4324,
I never heard of Vista 7 Home Premium.
Please publish a link to this operating system. Thanks. You may have a bootleg copy. In which Network Magic isn't going to work correctly.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

3rd party mail program?

Similar Messages

Maybe you are looking for