3rd party menus

I am having trouble getting started with linko trees
I create a new page
create a form and a table as a header at the top
Next I want to place the menu on the left and a table on the
right for data
I create a form and table for the data - it is 1000 wide and
locked to the left
I cannot move it across so I assume I place the menu over the
top of the table
Then I cannot see it
where am I going wrong
many thanks and a happy new year
ken
I cannot place the menu into the

> linko trees
url address to an uploaded example page?
do you mean this:
http://www.likno.com/drop-down-menu-trees/index.html
or some other js menu?
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Similar Messages

3rd Party Motion Menus

Does anybody know of a 3rd party motion menu retailer? The OEM menus are really good, but I would like to see more of what is out there. I have not yet mastered the creation of these menus, soooooo, in the meantime I am willing to pay for some really cool stuff . . . a DVD or CD or even a website . . .
Thanks,

Good day all
yes you lad's do a good job here keep up the good work
on a quick note
have there been any improvements in CS4 for excluding a thumb button from navigation - without going to AFX
or do the old rules still apply
PHOTO ONLY DISPLAY after firstly setting the link of the button to the relevant imported image timeline to complete thumbnail capture then choose convert the button to an object this effectively resolves the issues of navigation and retains the auto button routing for all remaining buttons.
FOR VIDEO DISPLAY
after setting the menu to animate buttons and linking the button to the respective video or chapter point to complete capture
the method used to exclude this button from navigation could be for example
with button routing, you just have all four directions of the button go back to itself, ie if it's button 1 then set all four directions to button 1 and it shouldn't be accessible or do any thing if you accessed it.
Then set up all the other buttons to exclude that button and make sure button 1 isn't the default button.
Jon i think your packs are well priced for the content detail and attention included well worth the money
thing that interests me - is the video video change in the motion thumb buttons noticeable when switching to the transition videos ?
can i ask if anyone has a possible solution for this ?
We get asked a lot if it is possible to use the videoroom shown here
as a motion menu
as near to this a possible - by clicking on the respective video window the stream will play
Thanks Again

Is blocking 3rd party cookies preventing some icons on sites' menus from showing?

I've noticed a problem in last several Fx versions where certain sites' menus & internal links - don't show icon images (for some).
Like menus on a credit card site, once logged in. Or certain webmail menu icons.
Or HP's community forum - the text editor (to add a question) menu icons - once logged in. https://h30434.www3.hp.com/t5/custom/pa ... .hp.com%2F
It's relatively few sites - but some are important. I also noticed that any icons / images that are a problem in Fx, display in IE 9, though IE settings show 3rd party cookies blocked.
Tried a new, clean profile w/ the Fx install I was using (35.0.1). All the icon images (on sites that previously had problems) seemed to display, as long as "Accept Cookies from site" was checked & 3rd party cookies were allowed.
In the clean profile, disabling 3rd party cookies seemed to cause some icons not to show. But in IE, 3rd party cookies are "supposedly" blocked, & the icons display in it.
Obviously, the problem isn't addons - problem can be reproduced in clean profile.
Also tried a clean Fx install in another folder. Same results as above - as with my old Fx install & a clean profile.
[img]http://i58.tinypic.com/2yknaeh.gif[/img]
[img]http://i60.tinypic.com/1zlvsox.gif[/img]

No.
Missing icons are usually supplied by a font that is downloaded from the server (@font-face) as you might see by little boxes that show the hex code of the characters instead.
Make sure that you allow pages to choose their own fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
You can check the gfx.downloadable_fonts.enabled pref on the about:config page and make sure that it is set to true (if necessary double-click the line to toggle its value).
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config

Open a form from a 3rd party Java/Web based application

Hi All,
I am working for a client who has a 3rd party web application built in Java.
For one of his requirements, he wants to open a form, an apps standard form on the click of a button/url in their application.
This appears like a normal form opening from the single-signon screen where you have the self service single sign-on page, it opens the apps forms on click of the url. Can we use the same logic here? This being the case, just curious to know how is the url to open the form built? (I see that the function name, resp id etc are there in the url) So that, I can actually manipulate the url to open the forms from a url. Please see that the custom application also is included into our Oracle apps, so the user is already logged in. We just need to open the form from the click of a url/button.
Thanks,
Srini.
Thanks,
Srini.

If the ICX_SESSION is already available then the form(I am assuming you are refering to a web based form here) should open directly if the function should be accessible to the user logged in. When you say your custom application is included in Oracle apps are you launching these pages from the Ebiz home page through menus and functions ?

Our converted eCourses often freeze when launched from our new 3rd party hosted LMS...

We have recently purchased a new externally hosted LMS system (Silkroad's GreenLight) and we have a 3rd party taking our older authorware courses (which are working) and updating/converting them using Adobe Captivate 5.5. Once these are done and uploaded into the LMS system, users are finding sporadic freezing at launch of the converted courses. In some cases we are using a Riverbed solution to compress content so that network performance is not an issue. With the various components involved in this situation. we are having a hard time troubleshooting and narrowing down the problem as it is so inconsistent. I noticed a blog http://helpx.adobe.com/captivate/kb/projects-published-captivate-5-lms.html suggesting a fix and we tried this with one user it worked with another it did not. Our environment consist of XP (and some Win7), Adobe Flash Player 10+, and IE8 or 9. Can anyone tell us what the proposed template fix described in the blog is actually doing? Or if you've experienced this problem and have another fix we could try? Any help is appreciated....Getting desperate. Thanks!

I believe the patches offered in that post were to address an issue that sometimes occurs with Resume Data bookmarking in certain LMSs.
If you are currently using Resume Data bookmarking, try disabling it by checking the box in LMS Customisation dialog to Never Send Resume Data. If that resolves your issue, you at least know what is causing it.
In cases where there are a large number of variables, the only way to diagnose the issue may be to remove as many variables as possible first. Then when you finally get to a stable version that does not misbehave, you then re-introduce the other components to find the one/s that re-introduce the issue.
So, in your case, you may need to look at how your developers are 'converting' the authorware content in Captivate. Make sure they recreate everything using Captivate components, and insert the images via the approved menus etc. I'd also temporarily avoid using this Riverbed compression solution until you have established the cause of your issue. It may be interferring with something.

Resolving how 3rd party apps show free space?

I've recently upgraded to Mountain Lion and am now just learning about "Local Backups" and how they work. This seems like a pretty neat feature and great extra data protection. However, I now have trouble with 3rd party apps that monitor and notify about free space. (ie iStat Menus, TechTool Pro, Disk Inventory X). As I said, I think this new feature is great for added data protection, but it seems it has a huge flaw if it is going to make all other applications show incorrect Used/Free space. In fact, since the Local Backup seems to use as much space as it can and will only free the space as needed, it seems every application or tool will show that the disk is always on the verge of being completely full. Has anyone found ways around this? Or are there any good apps that monitor and/or display free space (like iStat Menus) that can account for, or rather disregard, the space being used by Local Backup in the same way that the Finder window seems to? I hope that in future OS updates, Apple does something about this like making the space used by Local Backup hidden in some way.

Sorry, you didn't get my point:
'Unintentional' means accidentally. I always wonder how people can delete files 'accidentally', requiring trashing them and then, in a second step, empty the trash.
I do not empty my trash before having backed up, as I was pointing out. If I did, it would not be 'unintentionally'. It would be intentionally. And I should get fired. Unless I can have the backup drive there within 40 minutes.
My point is, YOU're heading to work in the morning, not having backed up for the past 2 weeks to the external disk since your backup is always with you on your 4 months old Mac, still under warranty and unlikely to break anyway. Crossing the street from the parking lot, you need to jump to avoid some crazy driver. You make it, only your laptop slips from under your arm, drops onto the tar, and worse, before you can grab it, that bus is rolling over it. The HDD/SSD/whatever is history, and so is your work and some other important coroprate docs worth 2 weeks. Will you continue to walk into the office to resign, or will you ask the bus driver to run you over as well, please?
My view is unchanged.
Can we stop this here, please? My data is safe, and yours I've written off a while ago.

Possible to control 3rd party plugin/palette?

Is it possible to write something (JavaScript/COM programming/plugin) that has access to a 3rd party plugin/palette? I'm talking about XMPie uDirect. XMPie doesn't offer an official API for the plugin but I want to invoke a special action automatically that can be accessed only by the plugin's InDesign palette. I want some kind of automation.

This won't work, sorry. The palette cannot be controlled through the menus... except showing/hiding it.
I got the same idea with system events. It would be great to have a program that sniffs system events and gives information when I press a special button in the InDesign palette. The 3rd party plugin should be a kind of library like DLL that exports functions. Does anybody know a program that can monitor InDesign.exe with all its sub-processes, DLL handles and called DLL functions?
[Edit:] I tried a DLL viewer which can open and show XMPie's plugin files XMPBackEnd5.apln and XMPFrontEnd5.apln (APLN = InDesign PlugIn). They seem to be normal DLL files. If anybody knows the secrets of "decrypting" DLLs it would be nice to know if this can help me. I need to invoke the plugin's commands for XMPie's "Dynamic Print" (new dialog opens) and then just confirm with "OK" to start the export.

Problem with 3rd Party Plug-Ins

I am running Logic Pro 7 and recently a majority of my 3rd party plug-ins quit working. When I try to load the plug-ins or open a song that uses the plug-ins, Logic unexpectedly quits. Some of the plug-ins that cause the problem are:
Spectrasonics Trilogy and Atmosphere
Plugsounds PS01-06
Ueberschall BPM120 and PLP120
Native Instruments Kompakt
This has happened before, but for some reason within two or three weeks, they just magically started working again. I could use an update on my OS (10.3.9) and some updates are available for the plug-ins, but why wouldn't everything continue to work as it had if nothing has changed? And is this absolutely necessary because I'd rather not because I'd have to update everything.

Did you update or change ANYTHING on your system? I've learnt that once I have a stable system, DONT upgrade unless you HAVE to, as updated plugins are designed to work on the most recent software, and sometimes dont get tested and/or work with "older" systems.
However, if you have not changed anything and are getting these problems, the most likely cause is either song corruption (though you said this is happening on multiple songs, so I doubt thats the problem) or preference corruption, which happened to me just a few months ago. Dont ask me how things get corrupted, but when they do you start to experience random weirdness. For example, recently all my songs stared giving me "memory errors" on stuff that use to playback fine. Once I rebuilt my preferences, every was stable again.
Here is a link to troubleshooting tips created by Bee Jay (a wise poster here). Follow them and they should fix your problems:
http://logicquicktips.blogspot.com/2006/10/troubleshooting-logic.html
Note: if you created any custom key commands for logic, do not trash your old preferences, as you can import your key commands from this file. Check your manual under import key commands. Here is a link to the PDF of the manual, which is easier to search:http://www.apple.com/support/logic/
If you want to turn off your plugins just to see if they are at fault (though it sounds to me like song/prefs corruption, not plugin problems) use the AU
manager. I'm not in front of Logic right now, but I believe its under either the apple pulldown menu, or the file menu, or one of the other menus "up top."
(sorry for my bad description). If you still cant find it, let me know and I'll look it up, but as I said, this sound like a corruption issue and not an issue with your plugins.
Best of luck!

Any 3rd party tools to convert FORMS to XML and back?

The Oracle conversion tool that comes with 10g Forms gives errors.
I was wondering whether there any any 3rd party tools?
I searched to net with no success.
I bumped into one site which gave these 2: FormGreg or FormsTool (http://www.orcl-toolbox.com/formstool.asp).
FormGreg is not available (I Googled but no success) and FormsTool (I downloaded and installed) has no XML conversion tools.

Hi,
Thanks so much for replying. I posted the errors here (no answers though):
XML to Forms conversion gives error for menus
Error when converting form to XML

Sort 3rd party plugins by categories

Hi there,
If this has already been asked, my apologies, I haven't found an answer to it using the search engine.
Is there a way to sort 3rd party plugins by categories, like Logic's built-in plugs (Compressors, EQs, Delays, Reverbs, etc...)?
It would be much better to search the plugins by category than by manufacturer name, don't you think?
Again, sorry if this is an old question.
And thanks in advance.

The problem with organising your plugins into channel strips is that it works fine to load the complete channel strip, but obviously cannot be used to load individual plugins on a channel.
I would like to be able to organise/customise my plugin menu in the way that best suits me, including not having to scroll all the way down to the third-party list and so on - I agree that this way of loading plugins is pretty inefficient.
Unfortunately, while this is technically easier using a Mackie Control (because you can scroll through the plugins with a knob before clicking it to load that selected plugin) - it's also next to useless because the plugin list is seemingly random, meaning that each time you scroll to a new plugin, you have no idea whether this is going to be the one you want, or whether it will take another 53 knob turns before you get there.
The library is supposed to be the redeveloped solution for this, and while it helps to a degree I actually don't like wasting a quarter of the available screen space having it open, or hitting a key command to open and close it just to load plugins. But you can't load individual plugins from the library anyway - it's either channel strips, or plugin settings/instruments. There is no way to highlight the plugin slot and then see your plugin list - so we are back to the navigate through four sub menus dance to load a plugin.
So none of the current methods are particularly good, imo. I'd like to see something better. At the very list, a menu list of "Favourite Plugins" at the top of the menu list which you could organise and choose which plugins should go in there.

3rd party tools to migrate Authorization profiles to roles

Experts,
Are there any 3rd party tools to migrate Authorization profiles to roles while upgrading to ECC 6.0?
NW

Hi,
Thanks so much for replying. I posted the errors here (no answers though):
XML to Forms conversion gives error for menus
Error when converting form to XML

HP AiO remote doesn't recognize 3rd party toner as compatible in LaserJet M1217nfw MFP

Hi,
I have a HP Envy 17 running Windows 8.1, a MacBook Air, an iPhone and a HP LaserJet M1217nfw MFP. I recently replaced the toner with a 3rd party replacement cartridge and while the printer does give me a "supply memory error" I am still able to print just fine from the Mac and my phone. I am unable however to print from my Envy. The HP All-in-One Remote app in Windows 8 gives me an "incompatible cartridge" message and says there are no solutions availble. Is there a work-around to this?
I am not very good at Windows 8....
Thanks

Hi Thaddeus,
Although the printer may resoponse to some commands, a supply memory error is an error state about the used cartridge.
Due the error message on the screen the HP AIO Remote recognize the cartridge as incompatible, that cannot be bypassed
with any settings, resolving the issue which cause the error message is the only key to resolve a such.
If the HP AiO Remote fails to print in such condition the only solution is to fully resolve the condition by following the steps listed in my previous post.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

3rd Party AIFF loops tempo changes from loop library and Logic session

Hi there,
Hope somebody out there can help me out!
I've recently purchased some 3rd party loops, some in AIFF and some in WAV (Which I have converted to AIFF using the Apple Loops Utility), and i have been able to get these into the logic Loop library successfully.....Or so I thought!
The problem I am having is that when previewing one of my loops it's often double the speed that the set tempo, and this will happen to ALL of my loops. But when I drag one into my session, Logic asks if it should copy over the automation data with it, click yes, and it plays fine in the arrange window. And funnily enough, all of my loops in the library start playing at the correct tempo!
Once this has all happened, i've tried quitting logic, and re-opening....but the issue just happens again....
Has anyone else had this problem, or have any idea as to what the issue may be??
Any help would be greatly appreciated!!
- Aaron

Hi there,
Hope somebody out there can help me out!
I've recently purchased some 3rd party loops, some in AIFF and some in WAV (Which I have converted to AIFF using the Apple Loops Utility), and i have been able to get these into the logic Loop library successfully.....Or so I thought!
The problem I am having is that when previewing one of my loops it's often double the speed that the set tempo, and this will happen to ALL of my loops. But when I drag one into my session, Logic asks if it should copy over the automation data with it, click yes, and it plays fine in the arrange window. And funnily enough, all of my loops in the library start playing at the correct tempo!
Once this has all happened, i've tried quitting logic, and re-opening....but the issue just happens again....
Has anyone else had this problem, or have any idea as to what the issue may be??
Any help would be greatly appreciated!!
- Aaron

How can I use a 3rd party XML parser such as xerces with OC4J ?

Hi all tech experts,
I am using Oracle Application Server 10g Release 2 (10.1.2) and i have
installed Portal and Wireless and OracleAS Infrastructure on the same
computer.
i tried all the solutions on this thread
Use of Xerces Parser in out application with Oracle App Server 9.0.4
but still fighting.
I have also posted this query on OTN on following thread
How can I use a 3rd party XML parser such as xerces with OC4J?
but no reply....
Please help me on this issue.
Since OC4J is preconfigured to use the Oracle XML parser which is xmlparserv2.jar.
i have read the following article which states that
OC4J is preconfigured to use the Oracle XML parser. The Oracle XML parser is fully JAXP 1.1 compatible and will serve the needs of applications which require JAXP functionality. This approach does not require the download, installation, and configuration of additional XML parsers.
The Oracle XML parser (xmlparserv2.jar) is configured to load as a system level library of OC4J through it's inclusion as an entry in the Class-Path entry of the oc4j.jar Manifest.mf file. This results in the Oracle XML parser being used for all common deployment and packaging situations. You are not permitted to modify the Manifest.mf file of oc4j.jar.
It must be noted that configuring OC4J to run with any additional XML parser or JDBC library is not a supported configuration. We do know customers who have managed to successfully replace the system level XML parser and the Oracle JDBC drivers that ship with the product, but we do not support this type of configuration due to the possibility of unexpected system behavior and system errors that might occur from replacing the tested and certified libraries.
If you absolutely must use an additional XML parser such as xerces, then you have to start OC4J such that the xerces.jar file is loaded at a level above the OC4J system classpath. This can be accomplished using the -Xbootclasspath flag of the JRE.
i have also run the following command
java -Xbootclasspath/a:d:\xerces\xerces.jar -jar oc4j.jar
but no success.
How could i utilize my jar's like xerces.jar and xalan.jar for parsing instead of OC4J in-built parser ?
All reply will be highly appreciated.
Thnx in advance to all.
Neeraj Sidhaye
try_catch_finally @ Y !

Hi Neeraj Sidhaye,
I am trying to deploy a sample xform application to the Oracle Application Server (10.1.3). However, I encountered the class loader issue that is similar to your stuation. I tried all the three solutions but the application is still use the Oracle xml paser class. I am wondering if you have any insight about this?
Thanks for your help.
Xingsheng Qian
iPass Inc.
Here is the error message I got.
Message:
java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
Stack Trace:
org.chiba.xml.xforms.exception.XFormsException: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
     at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
     at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
     at org.chiba.xml.xforms.Container.initModels(Unknown Source)
     at org.chiba.xml.xforms.Container.init(Unknown Source)
     at org.chiba.xml.xforms.ChibaBean.init(Unknown Source)
     at org.chiba.adapter.servlet.ServletAdapter.init(ServletAdapter.java:153)
     at org.chiba.adapter.servlet.ChibaServlet.doGet(ChibaServlet.java:303)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
     at org.chiba.xml.xforms.Instance.iterateModelItems(Unknown Source)
     at org.chiba.xml.xforms.Bind.initializeModelItems(Unknown Source)
     at org.chiba.xml.xforms.Bind.init(Unknown Source)
     at org.chiba.xml.xforms.Initializer.initializeBindElements(Unknown Source)
     at org.chiba.xml.xforms.Model.modelConstruct(Unknown Source)
     at org.chiba.xml.xforms.Model.performDefault(Unknown Source)
     at org.chiba.xml.xforms.XFormsDocument.performDefault(Unknown Source)
     at org.chiba.xml.xforms.XFormsDocument.dispatchEvent(Unknown Source)
     at org.apache.xerces.dom.NodeImpl.dispatchEvent(Unknown Source)
     ... 18 more

Airplay no longer working with 3rd party after upgrading to Maverick.

I updated my MacBook Pro this week and I have noticed that the airplay icon is no longer showing up in iTunes to connect to my Denon Amplifier. The interesting thing is that my old iPad 1 that I have that is still running 5.1.1 can connect and play to the receiver just fine.
Was there an update to the airplay software that would affect 3rd party devices? I was not able to find any new updates for my receiver.

I woke up this morning with the same problem (all was fine last night). Only way to get all my mailbox folders back was to use Time Machine while in Mail, choosing the backup file from previous night and selecting EACH MAILBOX to restore (23 for me). All appears okay so far today (except some of my accessories in the menu bar are gone).
I sure hope an update comes SOON. In anticipation of Mavericks and the new MAIL I switched from Outlook 2011 3 weeks ago transfering 17,000+ files and would hate to back

3rd party menus

Similar Messages

Maybe you are looking for