3rd party plugins are missing in logic pro x

only a quarter of my plugins are showing up in logic pro x any idea why & how i can get them 2 show up? cause they all work in logic express 9 except for a few that stopped working since i installed maverick osx. any help to point me in the right direction would be greatly appreciated.

It's not because they are outdated 32-bit AudioUnits and Logic Pro X is a 64-bit application?

Similar Messages

Will my 3rd party plugins be detected by Logic X?

I have logic pro 9 right now, if I uninstall it and leave my 3rd party plugins be and then install Logic X, will Logic X be able to pick up these right away? obviously the 64 bit plugins/instruments.

thanks for the quick response

Plugins shown missing in Logic pro x when they are there ....Plz help

I installed Melodyne when I just had Garageband....it worked
when I installed Logic pro 9 ....Melodyne stopped loading, I installed vanguard at this stage
When I installed Logic pro X .....error for both Melodyne and Vanguard was --> plugins not on your computer...now both melodyne and vanguard are missing plugins according to Logic pro x but it can't be as both these softwares work in Garageband or Logic pro 9...plz help .....

Additional Info:
As there is a common misunderstanding about VST plugins.....
JBridgeM... which is the Mac version of JBridge.... is only for converting Mac 32 bit VST plugins to Mac 64bit VST plugins.. so they can be used in a 64bit Mac DAW that uses VST plugins.. An example would be Live 9 64bit for Mac
It does not convert Windows/PC VST plugins... so you can use them on a Mac running OS X.....
JBridge for Windows... only converts Windows 32bit VST plugins for use in Windows 64bit DAWs.... and so again this will not work on Macs running OS X
...and to answer your question about older projects that used Vanguard and 32 Lives.... Yes, it would work automatically... when you load one of those older projects

3rd Party Plugin Text fuzzy in logic 9

I am running EZ Drummer and Stylus and in Logic 9 on my machine the text where the name of the loop is displayed or the type of kit, any basic text, is all messed up and illegible.
Everything else is fine, the samples play fine etc.
Is anyone else seeing this, does anyone have a workaround perhaps?
Thanks
Felix

It's not because they are outdated 32-bit AudioUnits and Logic Pro X is a 64-bit application?

Logic 8 and 3rd party plugins after upgrade

has anyone upgraded yet??????, whats the word on compatability on the 3rd party plugins
are they not going to work until they are updated again ???
has anyone tried or has anyone got the good word?
becasue mine will be here tomorrow
rock on

there are issues with multi-Output Instruments in the AU side; other than that so far so good .

Sort 3rd party plugins by categories

Hi there,
If this has already been asked, my apologies, I haven't found an answer to it using the search engine.
Is there a way to sort 3rd party plugins by categories, like Logic's built-in plugs (Compressors, EQs, Delays, Reverbs, etc...)?
It would be much better to search the plugins by category than by manufacturer name, don't you think?
Again, sorry if this is an old question.
And thanks in advance.

The problem with organising your plugins into channel strips is that it works fine to load the complete channel strip, but obviously cannot be used to load individual plugins on a channel.
I would like to be able to organise/customise my plugin menu in the way that best suits me, including not having to scroll all the way down to the third-party list and so on - I agree that this way of loading plugins is pretty inefficient.
Unfortunately, while this is technically easier using a Mackie Control (because you can scroll through the plugins with a knob before clicking it to load that selected plugin) - it's also next to useless because the plugin list is seemingly random, meaning that each time you scroll to a new plugin, you have no idea whether this is going to be the one you want, or whether it will take another 53 knob turns before you get there.
The library is supposed to be the redeveloped solution for this, and while it helps to a degree I actually don't like wasting a quarter of the available screen space having it open, or hitting a key command to open and close it just to load plugins. But you can't load individual plugins from the library anyway - it's either channel strips, or plugin settings/instruments. There is no way to highlight the plugin slot and then see your plugin list - so we are back to the navigate through four sub menus dance to load a plugin.
So none of the current methods are particularly good, imo. I'd like to see something better. At the very list, a menu list of "Favourite Plugins" at the top of the menu list which you could organise and choose which plugins should go in there.

All 3rd party plugins gone after update !!! HELP APPLE !!!!!!

All my 3rd party plugins are gone after the new update from apple !! I am running lep and logic studio G5 dual 2.5 ppc 8 gigs of ram !!!! What happen ???? Can not get the AU manger to launch !!!!! Help dead in the water !!!!!!!

Relax guy!
Try trashing to audiounits cache, and the Logic caches:
user/library/caches/com.apple.audiounits.cache
and
user*/library/caches/Logic/
Reboot, and try again...

3rd party plugins crash Premiere after restart.

Yesterday, everything worked fine. I have a Sequence with clips and have been happily rendering from it for a week.
It has a mixture of Magic Bullet Looks, Film Convert and native effects across a range of clips.
Today, on opening Premiere I find that if any of the 3rd party plugins are enabled I can't render - worse, they crash Premiere.
I have not installed anything or changed anything since I was last using Premiere. I installed an update to the Creative Cloud desktop app this morning, but that was after I started having these issues.
I have tried restarting Premiere numerous times.
Rendering is fine with native Premiere plugins.
System:
Win 7 Pro
Core i7 950
12gb RAM
Quadro FX3800
Running Adobe CC, latest versions

It gets wierder. After the Creative Cloud desktop app was updated it said a whole bunch of programs needed updating so I updated Premiere.
On restart it now wont even recognise the .MTS files it was happily reading earlier.
Apparently it is now an Unsupported Compression Type, which it clearly wasn't earlier.
Windows plays the file fine so this is ANOTHER Premiere issue I'm having now...

Will Lion work ok with Logic Pro and 3rd party plugins?

Will Lion OS work ok with Logic Pro and 3rd party plugins?
Any help would be much appreciated,
Regards James

Well, Sylenth I know... works under Logic Pro 9 and it should be found by left clicking and holding... the Software Insturment Button (The one just below where it says i/o and then scrolling down in the menu that appears to the Instrument section below the Apple Plugins...
I don't know about Massive 1.01 because i think that one is not Logic 9 compatible because it is so old.... and I have never used Vanguard... but according to it's specs the latest version should be found in the same place as Sylenth...
Both Sylenth and Vanguard are 32bit plugins...
...and.. it probably doesn't help that you are using older/not 'legal' copies of these plugins.... *ahem*

Leopard logic pro 8 3rd party plugins

Hey all,
are all 3rd Party Plugins working in Leopard??

All the ones I use are. Hope this helps!

How do you install and delete 3rd party plugins from Logic 9?

I have been trying to install RX2 from iZotope with no success. I can authorize it in the standalone version but not in logic. I had a previous demo version of it installed and everytime I went to authorize it would point to the earlier version and not authorize and run in demo. I removed a number of files pertaining to it from HD & User/ Library/ Preferences and Audio/ Components and tried reinstalling. Now it doesn't even show up in the plugin list. Can anyone tell me how to clear this up? Also, how to deal with 3rd party plugins. What can I say, no problems with Reaper! Appreciate any help with this. Thanks

The Isotope website isn't very clear about it.. It seems to indicate the Windows version is 32 and 64 bit where as the AU version is 32bit and will work/is compatible with Logic 64bit.. which it will as it will run under the 32 to 64bit bridge... when Logic is run in 64bit mode..but as i said, it's hard to tell one way or the other.
The thing is, if you simply reinstall it.. and then run Logic first in 32bit mode and then in 64bit mode.. it should show up.
Where are you looking for it in Logic?
Does it show up in the AU Plugin Manager? (after, that is you have reinstalled it)

How can i get 3rd party plugins for logic such as massive or nexus?

how can i get 3rd party plugins for logic such as massive or nexus?

Buy the 64bit AU versions from their respective online stores...
Massive can be found at;
http://www.native-instruments.com/en/products/komplete/synths-samplers/massive/p ricing/?content=2115
Nexus 2 (as Nexus 1 will not work with Logic Pro X) from;
http://refx.com/products/nexus/summary/
However, I suspect, based on the fact you could have simply searched on Google.. that buying them wasn't what you had in mind.................

Flickering graphics in Logic - especially 3rd party plugins

I see a lot of people reporting (myself included) "flickering" of graphics in Logic, especially in 3rd party plugins so I decided to post a video of it occurring. Is this a "known issue"? I will be reporting it to Apple, and I hope everyone else experiencing it will do the same. Please watch the video and provide any input that you might have. Thanks!
https://youtu.be/y_G0Q8J2Egw

Hi Clancy,
Could it be related to a Retina display?
Possibly... but as you know, I cannot test for that as i don't have a Retina display... (and frankly I'm not sure I want one at this time ) and I could recreate it on a standard screen using the same 3rd party plugin as the OP used... so i think it isn't specifically a Retina issue but... maybe retina 'enhances' the problem because of the extra load placed on the Graphical hardware/routines
So...
Is the OP is using a Retina display with his Mac Pro?
I suspect however, given the video he posted, demonstrating the issue occurring with the PSP MasterQ2 plugin...that it's only happening with some 3rd party plugins.... (as again he stated "especially with 3rd party plugins" which really might mean... only with.. depending on how you 'translate' that) and therefore my comments earlier.
Finally while the number of posts about this issue is actually rather small ( as far as i can determine from some detailed searching at least).... the thread on GS seems to indicate it's been going on since early versions of LPX and is related to Yosemite rather than LPX itself...
https://www.gearslutz.com/board/logic-pro-x/987219-logic-10-1-0-crazy-flashing-g raphics-plugins.html
...and some people have been reporting the same sort of flickering issues with other 3rd party apps and also plugins for apps like Aperture for example... after upgrading to 10.10... again indicating its a general Yosemite issue rather than a specific app issue.

What 3rd party companies are there that offer a photo printing service for ipad2 users? I suppose I am looking for a similar service to iPhoto on the MacBook pro but so far I've had no joy. I'm uk based.

What 3rd party companies are there that offer a photo printing service for ipad2 users? I suppose I am looking for a similar service to iPhoto on the MacBook pro but so far I've had no joy. I'm uk based.

Are these the kind of thing you're looking for:
http://itunes.apple.com/us/app/lifepics/id323705153?mt=8
http://itunes.apple.com/us/app/walgreens-for-ipad/id430444027?mt=8
Matt

Why are illustrator CS4 3rd party plugin panels taking minutes to load?

Hello Everyone
I use IL on Mac and use some 3rd party plugins with my software [This problem is most noticeable with the Cvalley plugins - Filterit and Xtreampath]. The problem is that often they'll take many minutes to load and stay as blank grey panels [as seen in the picture] with no manipulatable variables - does anyone know the reason for this and how to speed up their load time? as you'd imagine it slows me down a lot.
Here's an image of one of the dreaded blank panels; http://i35.photobucket.com/albums/d188/OphidianShenzi/blankpanel-1.jpg
Thank you greatly in advance again.

Are any of them PowerPC plugins (pre-2006)?
Is the sufficient disk space?*:
http://www.macmaps.com/diskfull.html
Have you tried repairing permissions?
- * Links to my pages may give me compensation.

3rd party plugins are missing in logic pro x

Similar Messages

Maybe you are looking for