3rd party plugins crash Premiere after restart.

Yesterday, everything worked fine. I have a Sequence with clips and have been happily rendering from it for a week.
It has a mixture of Magic Bullet Looks, Film Convert and native effects across a range of clips.
Today, on opening Premiere I find that if any of the 3rd party plugins are enabled I can't render - worse, they crash Premiere.
I have not installed anything or changed anything since I was last using Premiere. I installed an update to the Creative Cloud desktop app this morning, but that was after I started having these issues.
I have tried restarting Premiere numerous times.
Rendering is fine with native Premiere plugins.
System:
Win 7 Pro
Core i7 950
12gb RAM
Quadro FX3800
Running Adobe CC, latest versions

It gets wierder. After the Creative Cloud desktop app was updated it said a whole bunch of programs needed updating so I updated Premiere.
On restart it now wont even recognise the .MTS files it was happily reading earlier.
Apparently it is now an Unsupported Compression Type, which it clearly wasn't earlier.
Windows plays the file fine so this is ANOTHER Premiere issue I'm having now...

Similar Messages

3rd party plugins not working after archive and install

hi,
i have a few 3rd party plugins in my logic pro, such as all the native instruments, waves diamond, ik multimedia plugins, atmosphere and a few more,
i was getting an error on my g5 when i tried to run diskwarrior from the disk. it was the kernal panic message, it said i had to restart my mac, therefore i couldnt run diskwarrior from disk.
i did a bit of research and a few people suggested doing a archive install, so i did.
well what do you know, i had to re-install logic 8 again. other programmes such as transcribe, itunes idvd imovie etc were ok.
but logic didnt load up, o i had to re-install logic again,
also before i did that i checked to see if my 3rd party plugin were working in standalone, so i check all the native instruments and they seemed to work ok, T-racks deluxe works fine, so i thought they should all load up in logic.
once logic was installed again and had to get all the updates all my 3rd party plugins did not show up on my AU validation.
is there a way to get logic to see my 3rd party plugins or do i have to re-install all of them again.
cheers for the help
lib

Then check if the NI AU components are actually where they should be:
HD/Library/Audio/Plug-Ins/Components
If not copy them over from your "previous systems" folder which was created on your HD during the archive and install process.

3rd Party Plugins Have Disappeared After OS X Mavericks Update

Hi. I'm have a bit of a panic here.
I'm a sound engineer and I use Mainstage 2 frequently to run all FX live for a variety of artists.
After reading forums with regards to the Mavericks update, I found no evidence of it causing issues with Mainstage of Logic.
HOWEVER, I upgraded from Snow Leopard to Mavericks yesterday and Mainstage has decided to throw a massive wobbly. When I load up my show, it says "The plug-in named 'XXXXX' is not available on your sysem." It's done this for every single 3rd-party plugin on my machine so I basically have nothing! Good one Apple!
I restored my machine to a backup I took just before the OS upgrade. Guess what.......it's even doing it there now! It's back on Snow Leopard. I've been into the folders and all the plugins are there. For some reason, Mainstage isn't finding them. I'm at a total loss and about to throw this thing out the window.
Can anybody save me???
Thanks.
Jonny

Verified and repaired disk permissions but still no luck.
I thought Time Machine was meant to put the computer back to its exact state at the time of back-up?!
Anybody know if there's a UK phone number for an expert on Logic/Mainstage?!
Thanks.

How to add 3rd party plugins to premiere pro cc 2014

I have some plugins that I have installed in Premiere Pro cc and I upgraded to CC2014, and I need to get the plugins into the new software, How do I do this through Extension Manager

If these plugins are ZXP files, you can install them with Exension Manager CC. If not, you have to copy them to the appropriate folder manually.

All 3rd party plugins gone after update !!! HELP APPLE !!!!!!

All my 3rd party plugins are gone after the new update from apple !! I am running lep and logic studio G5 dual 2.5 ppc 8 gigs of ram !!!! What happen ???? Can not get the AU manger to launch !!!!! Help dead in the water !!!!!!!

Relax guy!
Try trashing to audiounits cache, and the Logic caches:
user/library/caches/com.apple.audiounits.cache
and
user*/library/caches/Logic/
Reboot, and try again...

Cineform and other 3rd party plugins for Creative Cloud, what happened to them?

Hi I don't want to panic but I just downloaded Adobe Premiere CC and it's telling me that I've rendered my previous project with a 3rd party plugin that isn't available. What is the process of installing my 3rd party plugins to premiere so I can edit with Blackmagic codecs, Cineform, and multiple others I have enjoyed using in CS6.

I followed the instructions from the Cineform site as given by scarolan_CS4 (thanks for that).
http://support.cineform.com/entries/24336007-A-Do-It-Yourself-Guide-to -adding-CineForm-support-in-Adobe-CC-Windows-
Works like a charm.
The only issues I have are:
Cineform plugs (except for levels) don't work. But they didn't work on CS5.5 and CS6 either - plus cá change.
I'm getting the 'saving metadata' when closing PP error back - I'd forgotten how I'd dealt with that, switched something off in prefs, if I remember (more internet searching!) This wasn't happening before I copied the Cineform directories to their CC locations, so I suspect it's related in some way.
The editing presets and the rendering presets all work fine.
======================================
I've also had good luck with other 3rd party plugins. I created a junction type link from C:\Program Files\Adobe\Common\Plug-ins\CS6\MediaCore to C:\Program Files\Adobe\Common\Plug-ins\7.0\MediaCore. The default mediacore directory is empty so this works, but I copied across 3rd party directories and files in the individual plugin folders for PP and AE as there are default Adobe files in there which may be different from CS6 to CC.
Note that I also created a junction from Photoshop 64 plugins for CS6 to CC and this also works a treat.
Just thought I'd mention it to show that it can work, I'm chuffed that it does as I was anticipating a system OS install to enable plugins to work and to keep 15-20% of my system SSD free.
If this junction stuff is too complicated (and you don't mind having two sets of the same files or deleting the older versions) just copy the plugin and relevant settings files instead. I assume this will work, although I haven't specifically tested it myself.
You can find free utilities to create junction links for Windows or this can be done via the command line. I forget the name of the utility I use, it works via the context menu. I have found that junction tends to work better than symbolic linking or other types of file 'aliasing' for most of my fumbling about with this solution.
This stuff sounds more complicated than it is, once someone has given the steps to take and you have installed the junction/symbolic linking utility it's just a matter of following the steps.
EDIT - I (re-)found the solution to the
Metadata. Metadata writing in progress (n files pending)
error -
Go to Edit>Preferences>Media and uncheck Write XMP ID to Files on Import (thanks to Jim Simon on this forum for this).

Disappearing "3rd Party Plugin" option

I recently tried to change the search path for 3rd party plugins to my After Effects plugins folder (Applications > Affter Effects > Plug-ins). They still wouldn't show up when I'd open Motion and navigate to the 3rd Party folder in the Library. So I gave up and didn't bother with it any more.
I was more distracted by the fact that none of my Replicators or Particle Emitters were showing up, so I re-installed (or possibly installed for the first time, this is a work computer, so I didn't do the initial installation) the Motion Content and they all appeared as expected. Now, here's what's confusing me:
When I go into Motion's Preferences now, there is no longer even an option to set the path for 3rd Party Filters and Plugins (under the Content Library & Templates section)...
Anyone know how I can fix this and get my plugins to work? I didn't have any trouble doing it on an ancient G4 Powerbook, but for some reason a fully-loaded MacPro is being difficult with me.
Thanks for any help.

I'm sorry, I don't think I explained this clearly enough:
My problem is NOT that the plug-ins won't show up in my Library after I set the path to a particular folder in Motion's Preferences.
My problem is that there is no longer even an option anymore to set the path to a particular folder in Motion's Preferences! It was there before, and now it has just disappeared! I don't know how to get it back. When I open Motion's Preferences pane now, in the General section, the sections are as follows:
Startup
Interface
File Browser & Library
Content Library & Templates
Media
Keyframe Editor
Normally, the "3rd Party Plugins" section is right below the "Content Library & Templates" section, but it's not there anymore...
I apologize for any confusion caused by an earlier post and hope my problem is more clearly understood now. Thanks!

3rd party plugins make Acrobat Crash

Hello, I am running Windows 7. When I install Third Party Plugins into the plugins folder, Acrobat crashes 20-30 seconds after it opens. I have tried this with Acrobat Pro 9, Acrobat Pro XI and Reader X. Always I get the same result. HELP!

Hi controls guy,
You need to check with the developer of these 3rd party plugins as to what might be causing the crash.
Regards,
Rave

All 3rd Party PlugIn Pref's get reset after InDesignCrash

AdobeInDesignCS 6
Steps to reproduce
1. Install third party plugins
2. Create Preference Settings
3. save and quit out of InDesign
4. launch InDesign, Verify pref settings.
5. Force Quit InDesign
6. Launch InDesign/Verfiy pref settings and they will not be there.

Well, now it's official, thanks to 3rd party apps and/or faulty system software my iPod is Dead.
When I created this thread I was having all 3rd party apps crash constantly, and instantly upon launch. The myriad of methods used to recover it to working order failed. I decided to do a Restore and use the last successful backup. It got to about the 95% mark on the restore and hung for 2 hours. The exact same place for 2 hours.
Not having the ability or patience to wait for my iPod to get done tying up my computer, I reset it. Now, all I've got is a $299.99 Paperweight that constantly displays a nice and shiny apple logo on it's screen.
An attempt to restore it to factory settings only gave me an error dialogue box:
The iPod "Kuhnaydeein's iPod" could not be restored.
An unknown error occurred (0xE8000035).
Now what am I supposed to do? I don't live near an Apple Store, the only place that sells apple merch is the store where I work, in the department I work. I know our policy on taking back/exchanging iPods.
What I've failed to mention is how I'm EVER going to sell one of these to someone if there's a chance they'll just be getting the same FAULTY Hardware/Software I'm now stuck with? Is Apple going to come to the rescue, read this post and replace my iPod? I sincerely hope they read this, because they don't give the slightest hint at any Direct Email addresses on the Apple.com website. (What's with that anyway?)
So what do I do now? RESTORING IS NOT AN OPTION.

Possible fix for 3rd party apps crashing after 3.0

If some or most of your 3rd party apps crash when launching them after upgrading to 3.0, I have a fix that cured my problem. Another symptom is that you can delete the App, then reinstall and it works until syncing with iTunes.
Well my cure was to download any app, even a free one via iTunes, then sync with the iPhone. All was cured. I usually just download Apps straight from the iPhone, but the iTunes route worked.

If some or most of your 3rd party apps crash when launching them after upgrading to 3.0, I have a fix that cured my problem. Another symptom is that you can delete the App, then reinstall and it works until syncing with iTunes.
Well my cure was to download any app, even a free one via iTunes, then sync with the iPhone. All was cured. I usually just download Apps straight from the iPhone, but the iTunes route worked.

Crashes with 3rd party plugins

I am loving the functionality of MS, but these crashes are getting really embarrassing, especially amongst my PC loving band members. I have the new unibody MBP with 4gb ram. Everything is great and solid while performing. I never get any clicks or pops while playing. All of my crashes occur when changing patches within a concert. It does seem to be more directly related to the patches containing 3rd party plugins, such as Kontakt 3, or Kore 2. It also seems to be only the sample based patches.

Ok, so it looks like there are problems with the new MBP's running more than 3GB's of ram. If I pull out my 2x2gig sticks and put in the original 2x1gig sticks, it runs fine and never crashes. I bought the ram from OWC. I will be sending it back, but in the meantime I am not sure that I trust their ram. It is made (or distributed) by Nanya. I don't know if the problem is with the ram, or if it is a problem with NI product running in Mainstage, or if it is a problem with the new MBP running 4gigs of ram. We shall see.

Logic 8 and 3rd party plugins after upgrade

has anyone upgraded yet??????, whats the word on compatability on the 3rd party plugins
are they not going to work until they are updated again ???
has anyone tried or has anyone got the good word?
becasue mine will be here tomorrow
rock on

there are issues with multi-Output Instruments in the AU side; other than that so far so good .

Every single 3rd party App crashes

Hello,
I'm running a 8gb EDGE 2.0.1 iphone. Every single 3rd party app crashes all of a sudden. I tried restore. all native apple apps load, but even when I just synce 1 3rd party app to the iphone (so all native iphone apps and 1 3rd party) that always crashes to iphone home screen.
I need to fix this because I need to use 3rd party apps like zenbe (which was working perfectly for me a week ago)

ok i had this same problem i called apple the guy i got new exactly what was happening and game me a work around. follow these steps exactly. this is a mac work around only dont know about windows.
1 make sure your phone is not connected to your computer.
2 delete every app directly from iphone by holding a app and then clicking the x
3 go to settings general reset and choose reset all settings
4 now on your computer open itunes on the menu bar go to store and deauthorize your computer
5 quit itunes
6 reopen itunes and reauthorize the computer then exit itunes
7 open isync go to preferences and select reset sync history and exit isync
8 open itunes and connect your iphone. it may freeze itunes for 2-10 minutes but dont exit just
wait it will eventually recognize your iphone.
9 after itunes recognizes your iphone go to the music tab and select a small playlist to sync then got to the app tab and choose sync selected apps and if anything is selected deselect them.
10 if you have remote app select it if not download it for free and select it
11 then select two other apps and click apply
12 it will start to sync. it will say removing apps let it do this. depending on how many apps you have it could take a long time (mine took more than an hour)
13 if you get error 0xE800002E after you are done just repeat steps 1-8 it wont take long this time
14 if you dont get the error check to see if your remote works if it does check the other apps if they dont work repeat steps 1-8 if they do you are done just restart the iphone to make sure the still work
15 if you got the 0xE800002E error and have repeated 1-8 sync remote and two other apps and it should work if it does not try again it worked for me the first time though.
it is a long process but be patient and all will work out.
that is it until apple fixes this stupid issue which should never have gotten passed testing.
hope this helps
if u need help or inform me of how it went u can email me at [email protected]

All 3rd party apps Crash - Already Restored FIVE Times to date - Apple fix?

Since the 2.0 update my apps have had constant crashing issues. Usually after opening 8 or so apps in a row (very easy to do when downloading and testing many apps) ... Powering down and powering back up usually helped/fixed the issue, if temporarily.
Now, since 2.0.1 I've had times when one app will crash to the home screen, and from that point on ALL 3rd party apps immediately crash. Powering down the iPod, and powering back up does not fix the problem. Resetting the ipod (Sleep and Home buttons held) does not help either. I've also tried just Syncing the ipod, but this, alas, does nothing to help.
When it's come to this in the past I've had to do a complete iPod restore, which if it weren't just for the time taken restoring, the time taken re-arranging the icons/screens puts the process into the realm of a major pain. But having a way to assign apps to a particular screen on the ipod/iphone within iTunes is a topic for another thread.
Is there a way around this (crashing issue) that I'm just not seeing?
I'm tired of being and eff-ing guinea pig; this is not why I'm an apple user, this is one of the reasons I make fun of Windows people and get them to switch TO apple.

Well, now it's official, thanks to 3rd party apps and/or faulty system software my iPod is Dead.
When I created this thread I was having all 3rd party apps crash constantly, and instantly upon launch. The myriad of methods used to recover it to working order failed. I decided to do a Restore and use the last successful backup. It got to about the 95% mark on the restore and hung for 2 hours. The exact same place for 2 hours.
Not having the ability or patience to wait for my iPod to get done tying up my computer, I reset it. Now, all I've got is a $299.99 Paperweight that constantly displays a nice and shiny apple logo on it's screen.
An attempt to restore it to factory settings only gave me an error dialogue box:
The iPod "Kuhnaydeein's iPod" could not be restored.
An unknown error occurred (0xE8000035).
Now what am I supposed to do? I don't live near an Apple Store, the only place that sells apple merch is the store where I work, in the department I work. I know our policy on taking back/exchanging iPods.
What I've failed to mention is how I'm EVER going to sell one of these to someone if there's a chance they'll just be getting the same FAULTY Hardware/Software I'm now stuck with? Is Apple going to come to the rescue, read this post and replace my iPod? I sincerely hope they read this, because they don't give the slightest hint at any Direct Email addresses on the Apple.com website. (What's with that anyway?)
So what do I do now? RESTORING IS NOT AN OPTION.

How do you install and delete 3rd party plugins from Logic 9?

I have been trying to install RX2 from iZotope with no success. I can authorize it in the standalone version but not in logic. I had a previous demo version of it installed and everytime I went to authorize it would point to the earlier version and not authorize and run in demo. I removed a number of files pertaining to it from HD & User/ Library/ Preferences and Audio/ Components and tried reinstalling. Now it doesn't even show up in the plugin list. Can anyone tell me how to clear this up? Also, how to deal with 3rd party plugins. What can I say, no problems with Reaper! Appreciate any help with this. Thanks

The Isotope website isn't very clear about it.. It seems to indicate the Windows version is 32 and 64 bit where as the AU version is 32bit and will work/is compatible with Logic 64bit.. which it will as it will run under the 32 to 64bit bridge... when Logic is run in 64bit mode..but as i said, it's hard to tell one way or the other.
The thing is, if you simply reinstall it.. and then run Logic first in 32bit mode and then in 64bit mode.. it should show up.
Where are you looking for it in Logic?
Does it show up in the AU Plugin Manager? (after, that is you have reinstalled it)

3rd party plugins crash Premiere after restart.

Similar Messages

Maybe you are looking for